Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud profiling radar satellite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

First EarthCARE CPR Observations of Dynamics–Microphysics Coupling in Marine Cold‐Air Outbreak Clouds

Marine cold-air outbreak (MCAO) clouds begin as shallow cloud streets near the ice edge and evolve into broken open-cell convection downstream. Their rapid transitions in cloud structure and microphysics are closely linked to vertical motions, but this interplay has not previously been observed from space. The EarthCARE satellite, carrying the first spaceborne Doppler radar (Cloud Profiling Radar, CPR), now measures hydrometeor sedimentation velocity and vertical air motion. Using CPR observations over the Norwegian and Barents Seas (December 2024–May 2025), we analyze MCAO and non-MCAO clouds. We find that strong updrafts in MCAO clouds coincide with larger supercooled liquid water (SLW) path (LWP). These conditions are accompanied by increases in sedimentation velocity and its vertical gradient, reflecting rapid riming-driven ice growth. In contrast, non-MCAO clouds show lower riming efficiency at similar LWP due to relatively weaker dynamical support. This emphasizes the importance of dynamics in shaping polar cloud structure and microphysics.

Kim, Jiseob [McGill Univ., Montreal, QC (Canada)] ↗
DOE OSTI2025

Orbital-Radar v1.0.0: a tool to transform suborbital radar observations to synthetic EarthCARE cloud radar data

The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite developed by the European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA) launched in May 2024 carries a novel 94 GHz cloud profiling radar (CPR) with Doppler capability. This work describes the open-source instrument simulator Orbital-Radar, which transforms high-resolution radar data from field observations or forward simulations of numerical models to CPR primary measurements and uncertainties. The transformation accounts for sampling geometry and surface effects. We demonstrate Orbital-Radar's ability to provide realistic CPR views of typical cloud and precipitation scenes. The presented case studies show small-scale convection, marine stratus clouds, and Arctic mixed-phase cloud cases. These results provide valuable insights into the capabilities and challenges of the EarthCARE CPR mission and its advantages over the CloudSat CPR. Finally, Orbital-Radar allows for evaluating kilometre-scale numerical weather prediction models with EarthCARE CPR observations. So, Orbital-Radar can generate calibration and validation (Cal/Val) data sets already pre-launch. Nevertheless, an evaluation of synthetic CPR output data to accurate EarthCARE CPR data is missing.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Ka-Band ARM Zenith Radar (KAZR) Active Remote Sensing of Clouds (ARSCL) CloudSat Calibration (KAZRARSCL-CLOUDSAT) (Value-Added Product Report)

The Ka-band ARM Zenith Radar Active Remote Sensing of CLouds CloudSat-aligned (KAZRARSCL-CLOUDSAT) Value-Added Product (VAP) applies satellite-based reflectivity calibrations to KAZRARSCL data sets. The Atmospheric Radiation Measurement (ARM) user facility has primarily used radar subsystem calibration monitoring to track cloud radar reflectivity drift over time, since reliable external calibration sources or other absolute references (such as corner reflectors) have historically been unavailable or impracticable. A study by Kollias et al. (2019) examined cloud reflectivity profiles observed with a well-characterized spaceborne downward-pointing millimeter cloud radar, operating as part of NASA’s CloudSat satellite mission (Tanelli et al. 2008). The Kollias team derived monthly statistical reflectivity offsets between CloudSat and the various generations of ARM cloud radars (millimeter wavelength cloud radar [MMCR], W-Band ARM Cloud Radar [WACR[, and Ka-band ARM Zenith Radar [KAZR]) for many, but not all, months at most fixed and mobile ARM sites over the period 2007-2017. These offsets, when available, are applied to the existing KAZRARSCL VAP products using the KAZRARSCL-CLOUDSAT VAP.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Synergetic Use of the WSR-88D Radars, GOES-R Satellites, and Lightning Networks to Study Microphysical Characteristics of Hurricanes

Abstract This study analyzes the microphysics and precipitation pattern of Hurricanes Harvey (2017) and Florence (2018) in both the eyewall and outer rainband regions. From the retrievals by a satellite red–green–blue scheme, the outer rainbands show a strong convective structure while the inner eyewall has less convective vigor (i.e., weaker upper-level reflectivities and electrification), which may be related to stronger vertical wind shear that hinders fast vertical motions. The WSR-88D column-vertical profiles further confirm that the outer rainband clouds have strong vertical motion and large ice-phase hydrometeor formation aloft, which correlates well with 3D Lightning Mapping Array source counts in height and time. From the results from this study, it is determined that the inner eyewall region is dominated by warm rain, whereas the external rainband region contains intense mixed-phase precipitation. External rainbands are defined here as those that reside outside of the main hurricane circulation, associated with surface tropical storm wind speeds. The synergy of satellite and radar dual-polarization parameters is instrumental in distinguishing between the key microphysical features of intense convective rainbands and the warm-rain-dominated eyewall regions within the hurricanes. Substantial amounts of ice aloft and intense updrafts in the external rainbands are indicative of heavy surface precipitation, which can have important implications for severe weather warnings and quantitative precipitation forecasts. The novel part of this study is to combine ground-based radar measurement with satellite observations to study hurricane microphysical structure from surface to cloud top so as to fill in the gaps between the two observational techniques.

Meteorology & Atmospheric Sciences↗
DOE OSTI2023

Insights into the relation between vertical cloud structure and dynamics of three polar lows: Observations from COMBLE

The vertical structure of three polar lows is described using profiling radar, lidar, and passive remote sensors deployed at a coastal site in northern Norway. The data were collected as part of the Cold-air Outbreaks in the Marine Boundary Layer Experiment (COMBLE). These data are examined in the context of satellite imagery, operational weather radar reflectivity imagery, and output from the AROME-Arctic model. A comparison to satellite images shows that AROME-Arctic captured the polar lows well. All three polar lows form in marine cold-air outbreaks and are surrounded by open-cellular convection typical of such outbreaks. Two of the lows form in a forward shear environment, and one under reverse shear. Initially, the three polar lows are comma-shaped; two of them transition to be more spirali-form at their mature stage and have mostly cloud-free warm cores. The warm cores are the result of a warm-seclusion process. All three lows have stratiform precipitation bands, marked by little cloud liquid water, and rather high surface precipitation rate. The vertical drafts and turbulence in these stratiform clouds are generally weak. In conclusion, all three lows also have convective clouds, which have stronger vertical drafts, stronger turbulence, and pockets of high liquid water content.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Simulation of Continental Shallow Cumulus Populations Using an Observation-Constrained Cloud-System Resolving Model

Continental shallow cumulus (ShCu) clouds observed on 30 August 2016 during the Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems (HI-SCALE) field campaign are simulated by using an observation-constrained cloud-system resolving model. On this day, ShCu forms over Oklahoma and southern Kansas and some of these clouds transition to deeper, precipitating convection during the afternoon. We apply a four-dimensional ensemble-variational (4DEnVar) hybrid technique in the Community Gridpoint Statistical Interpolation (GSI) system to assimilate operational data sets and unique boundary layer measurements including a Raman lidar, radar wind profilers, radiosondes, and surface stations collected by the U.S. Department of Energy's (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) atmospheric observatory into the Weather Research and Forecasting (WRF) model to ascertain how improved environmental conditions can influence forecasts of ShCu populations and the transition to deeper convection. Independent observations from aircraft, satellite, as well as ARM's remote sensors are used to evaluate model performance in different aspects. Several model experiments are conducted to identify the impact of data assimilation (DA) on the prediction of clouds evolution. The analyses indicate that ShCu populations are more accurately reproduced after DA in terms of cloud initiation time and cloud base height, which can be attributed to an improved representation of the ambient meteorological conditions and the convective boundary layer. Extending the assimilation to 18 UTC (local noon) also improved the simulation of shallow-to-deep transitions of convective clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Performance of New Near-Real-Time PERSIANN Product (PDIR-Now) for Atmospheric River Events over the Russian River Basin, California

Most heavy precipitation events and extreme flooding over the U.S. Pacific coast can be linked to prevalent atmospheric river (AR) conditions. Thus, reliable quantitative precipitation estimation with a rich spatiotemporal resolution is vital for water management and early warning systems of flooding and landslides over these regions. At the same time, high-quality near-real-time measurements of AR precipitation remain challenging due to the complex topographic features of land surface and meteorological conditions of the region: specifically, orographic features occlude radar measurements while infrared-based algorithms face challenges, differentiating between both cold brightband (BB) precipitation and the warmer nonbrightband (NBB) precipitation. It should be noted that the latter precipitation is characterized by greater orographic enhancement. In this study, we evaluate the performance of a recently developed near-real-time satellite precipitation algorithm: Precipitation Estimation from Remotely Sensed Information Using Artificial Neural Networks (PERSIANN) Dynamic Infrared–Rain Rate-Now (PDIR-Now). This model is primarily dependent on infrared information from geostationary satellites as input; consequently, PDIR-Now has the advantage of short data latency, 15–60-min delay between observation to precipitation product delivery. The performance of PDIR-Now is analyzed with a focus on AR-related events for cases dominated by NBB and BB precipitation over the Russian River basin. In our investigations, we utilize S-band (3-GHz) precipitation profilers with Joss/Parsivel disdrometer measurements at the Middletown and Santa Rosa stations to classify BB and NBB precipitation events. In general, our analysis shows that PDIR-Now is more skillful in retrieving precipitation rates over both BB and NBB events across the topologically complex study area as compared to PERSIANN-Cloud Classification System (CCS). Also, we discuss the performance of well-known operational near-real-time precipitation products from 2017 to 2019. Conventional categorical and volumetric categorical indices, as well as continuous statistical metrics, are used to show the differences between various high-resolution precipitation products such as Multi-Radar Multi-Sensor (MRMS).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Marine Boundary Layer Cloud Boundaries and Phase Estimation Using Airborne Radar and In Situ Measurements During the SOCRATES Campaign over Southern Ocean

The Southern Ocean Clouds, Radiation, Aerosol Transport Experimental Study (SOCRATES) was an aircraft-based campaign (15 January–26 February 2018) that deployed in situ probes and remote sensors to investigate low-level clouds over the Southern Ocean (SO). A novel methodology was developed to identify cloud boundaries and classify cloud phases in single-layer, low-level marine boundary layer (MBL) clouds below 3 km using the HIAPER Cloud Radar (HCR) and in situ measurements. The cloud base and top heights derived from HCR reflectivity, Doppler velocity, and spectrum width measurements agreed well with corresponding lidar-based and in situ estimates of cloud boundaries, with mean differences below 100 m. A liquid water content–reflectivity (LWC-Z) relationship, LWC = 0.70Z0.29, was derived to retrieve the LWC and liquid water path (LWP) from HCR profiles. The cloud phase was classified using HCR measurements, temperature, and LWP, yielding 40.6% liquid, 18.3% mixed-phase, and 5.1% ice samples, along with drizzle (29.1%), rain (3.2%), and snow (3.7%) for drizzling cloud cases. The classification algorithm demonstrates good consistency with established methods. This study provides a framework for the boundary and phase detection of MBL clouds, offering insights into SO cloud microphysics and supporting future efforts in satellite retrievals and climate model evaluation.

MBL clouds over Southern Ocean↗
DOE OSTI2025

Shallow cloud variability in Houston, Texas, during the ESCAPE and TRACER field experiments

Shallow convection plays an important role in Earth's climate system by regulating the vertical transport of heat, moisture, and momentum in the lower troposphere. Aerosols, large-scale meteorology, and low-level convergence influence the spatiotemporal variability in shallow convection, and the coastal urban area of Houston, Texas, is an ideal laboratory to investigate these complex interactions. Here, geostationary satellite and ground-based radar observations from June to September 2022 during the TRacking Aerosol Convection interactions ExpeRiment (TRACER) and Experiment of Sea Breeze Convection, Aerosols, Precipitation, and Environment (ESCAPE) field campaigns are used to characterize the spatial coverage, vertical extent, and precipitation fraction of shallow convective clouds. The fused operational remote sensing datasets over a 250 km × 250 km domain are evaluated against profiling observations. The domain-wide diurnal shallow cloud fractions are used to identify four distinct modes of shallow convection. In all clusters, the domain-wide cloud fractions are consistently higher than the domain-wide precipitation fractions, and shallow cloud fractions are higher over water than they are over land, while the shallow precipitation fractions show the opposite behavior. In the two modes with minimal deep cloud activity, shallow cloud frequency is highest over ocean in the early morning, and there is a transition to higher shallow cloud frequency over land by the afternoon in one cluster or to high shallow cloud frequencies everywhere by the afternoon in the other. Lastly, we find regions with higher shallow cloud top heights and a large region along the coastline where shallow clouds are more likely to precipitate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Remote sensing of planetary boundary layer from ground and space: Structure, thermodynamics, and boundary layer clouds

The planetary boundary layer (PBL) is a critical interface between Earth's surface and atmosphere, influencing atmospheric convection, weather patterns, and air quality. Recognized by the 2017 National Academies of Sciences, Engineering, and Medicine Earth Science Decadal Survey as an Incubation Targeted Observable, high-quality and effective observation of the PBL has become a priority. This paper reviews surface-based and satellite remote sensing techniques for characterizing PBL features, including PBL height (PBLH), boundary layer thermodynamics, turbulence, and boundary layer clouds (BLCs). These elements are treated as interconnected aspects of the PBL system, while recognizing that different instruments retrieve different physical manifestations of the PBL. The review summarizes recent advances and limitations in Micro-Pulse Lidar (MPL), Doppler lidar, Raman lidar, Differential Absorption Lidar (DIAL), ceilometers, wind profilers, GNSS Radio Occultation, radar, and hyperspectral sounders. These observations help trace dynamic processes within the PBL and link PBL structure to broader weather and climate processes. The review also highlights persistent observational gaps over oceans, remote land, and polar regions, where continuous surface-based profiling is sparse. By comparing instrument capabilities, practical limitations, and interpretation issues, this review emphasizes the need for integrated remote sensing approaches and careful definition of the retrieved PBL quantities.

Boundary layer clouds↗
DOE OSTI2023

Assessing Arctic low-level clouds and precipitation from above – a radar perspective

Most Arctic clouds occur below 2 km altitude as revealed by CloudSat satellite observations. However, recent studies suggest that the relatively coarse spatial resolution, low sensitivity, and blind zone of the radar installed on CloudSat may not enable it to comprehensively document low-level clouds. We investigate the impact of these limitations on the Arctic low- level cloud fraction, which is the amount of cloudy points with respect to all points as a function of height, derived from CloudSat radar observations. For this purpose, we leverage highly resolved vertical profiles of low-level cloud fraction derived from downlooking Microwave Radar/radiometer for Arctic Clouds (MiRAC) radar reflectivity measurements. MiRAC has been operated during four aircraft campaigns taking place in the vicinity of Svalbard during different times of the year and covering more than 25,000 km. This allows us to study the dependence of CloudSat limitations on different synoptic and surface conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Observations Pertaining to Precipitation within the Northeast Pacific Stratocumulus-to-Cumulus Transition

Three genuine stratocumulus-to-cumulus transitions sampled during the Cloud System Evolution over the Trades (CSET) campaign are documented. The focus is on Lagrangian evolution of in situ precipitation, thought to exceed radar/lidar retrieved values because of Mie scattering. Two of the three initial stratocumulus cases are pristine [cloud droplet number concentrations ($N_d$) of ~22 cm –3 ] but occupied boundary layers of different depths, while the third is polluted ($N_d$ ~ 225 cm –3 ). Hourly satellite-derived cloud fraction along Lagrangian trajectories indicate that more quickly deepening boundary layers tend to transition faster, into more intense but more occasional precipitation. These transitions begin either in the morning or late afternoon, suggesting that preceding night processes can precondition or delay the inevitable transition. The precipitation shifts toward larger drop sizes throughout the transition as the boundary layers deepen, with aerosol concentrations only diminishing in two of the three cases. Ultraclean ($N_d$ < 1 cm –3 ) cumulus clouds evolved from pristine stratocumulus cloud with unusually high precipitation rates occupying a shallow, well-mixed boundary layer. Results from a simple one-dimensional evaporation model and from radar/lidar retrievals suggest subcloud evaporation likely increases throughout the transition. This, coupled with larger drop sizes capable of lowering the latent cooling profile, facilitates the transition to more surface-driven convection. The coassociation between boundary layer depth and precipitation does not provide definitive conclusions on the isolated effect of precipitation on the pace of the transition. Differences between the initial conditions of the three examples provide opportunities for further modeling studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Profiles of Radiative Fluxes at ENA

Profiles of radiative fluxes observed at the Atmospheric Radiation Measurement (ARM)’s Eastern North Atlantic (ENA) observatory along with the ancillary measurements are reported. The below-cloud drizzle properties were derived by combining the data from the ceilometer and Ka-band ARM Zenith Radar (KAZR) following the technique explained by Ghate et al. (2021 JAMC). The cloud and drizzle water path values were derived from the brightness temperatures reported by the microwave radiometer following the technique of Cadeddu et al. (2020 AMT). The cloud water path was then scaled to the KAZR-reported radar reflectivity to calculate profiles of liquid water content (LWC). Following the analysis from Ghate et al. (2023 JGR), cloud droplet effective radius was calculated using the number concentration value of 100 cm-3. The cloud properties, along with the thermodynamic properties, served as an input to the Rapid Radiative Transfer Model (RRTM) to yield profiles of radiative fluxes at a 1-minute temporal and 50-m vertical resolution. The fluxes were then averaged to hourly temporal resolution for analysis. In Mitra et al. (2025 JClim), the calculated profiles were compared against those derived from the satellite measurements (SYN1deg). Flux profiles from the SYN1deg and the thermodynamic and cloud properties used for deriving them are also reported here. Both all-sky and clear-sky radiative flux profiles were calculated. Due to the large data volume, the surface and top-of-atmosphere (TOA) radiative fluxes for the six-year period, and the hourly profiles of the radiative fluxes for January 2018, are submitted here. Full profiles of radiative fluxes calculated from the thermodynamic and cloud properties measured at the ENA site at 1-minute temporal and 50-m vertical resolution for a six-year period are available from the authors. Six files here correspond to the following data: 1_ENARAD_CERES_with_cld_amount_timeseries.nc: Time-series of hourly values of RRTM-simulated values of upwelling and downwelling fluxes at the surface and TOA, observed boundary-layer cloud fractions, and upwelling and downwelling fluxes from the SYN1deg from July 2015 to January 2022. 2_CERES_2018_at_CERES_levels.nc: SYN1deg radiative fluxes at six levels for the year 2018. 3_ENARad_2018_at_CERES_levels.nc: RRTM calculated fluxes at the SYN1deg vertical levels for the year 2018. 4_ENARad_rrtminputs_hourly_201801.nc: Thermodynamic and cloud properties used as an input to the RRTM for January 2018. 5_CERES_inputs_hourly_201801.nc: Thermodynamic and cloud properties utilized by SYN1deg algorithm for January 2018. 6_ENARAD_hourly_201801.nc: Full profiles of hourly averaged radiative fluxes from the RRTM simulations for January 2018.

Atmosphere↗
DOE OSTI2024

Deriving cloud droplet number concentration from surface-based remote sensors with an emphasis on lidar measurements

Abstract. Given the importance of constraining cloud droplet number concentrations (Nd) in low-level clouds, we explore two methods for retrieving Nd from surface-based remote sensing that emphasize the information content in lidar measurements. Because Nd is the zeroth moment of the droplet size distribution (DSD), and all remote sensing approaches respond to DSD moments that are at least 2 orders of magnitude greater than the zeroth moment, deriving Nd from remote sensing measurements has significant uncertainty. At minimum, such algorithms require the extrapolation of information from two other measurements that respond to different moments of the DSD. Lidar, for instance, is sensitive to the second moment (cross-sectional area) of the DSD, while other measures from microwave sensors respond to higher-order moments. We develop methods using a simple lidar forward model that demonstrates that the depth to the maximum in lidar-attenuated backscatter (Rmax⁡) is strongly sensitive to Nd when some measure of the liquid water content vertical profile is given or assumed. Knowledge of Rmax⁡ to within 5 m can constrain Nd to within several tens of percent. However, operational lidar networks provide vertical resolutions of > 15 m, making a direct calculation of Nd from Rmax⁡ very uncertain. Therefore, we develop a Bayesian optimal estimation algorithm that brings additional information to the inversion such as lidar-derived extinction and radar reflectivity near the cloud top. This statistical approach provides reasonable characterizations of Nd and effective radius (re) to within approximately a factor of 2 and 30 %, respectively. By comparing surface-derived cloud properties with MODIS satellite and aircraft data collected during the MARCUS and CAPRICORN II campaigns, we demonstrate the utility of the methodology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Final report: Insights from ARM observations into aerosol processing and transport by extratropical cyclones and aerosol effects on cyclone clouds

This project advanced understanding of aerosol–cloud interactions in extratropical cyclones using observations from the Atmospheric Radiation Measurement (ARM) Eastern North Atlantic (ENA) observatory and ACE-ENA field campaigns, along with satellite datasets and numerical modeling. We have quantified the susceptibility of frontal clouds to aerosols, showing that this susceptibility is similar to that in non-frontal clouds despite substantial (factor 2) differences in droplet concentrations between these cloud types, and also significant differences in cloud albedo. A key finding was that Aitken-mode (here, 60-100nm diameter) aerosols play a disproportionately important role in droplet activation in frontal clouds, and concentrations of these particles are frequently strongly biased in climate models. Activation of aerosols depends strongly on updraft speeds, and via collaboration with Argonne National Laboratory we contributed to quantifying these better with the ARM radar wind profiler at the ENA site. Our studies in the North Atlantic have analogs in the Southern Ocean, and to draw these out we examined data from the MARCUS and SOCRATES field campaigns. We identified new particle formation within extratropical cyclones as a potentially important source of cloud condensation nuclei in these pristine marine environments. By combining ARM observations with perturbed parameter ensemble simulations, we demonstrated that surface observations can effectively constrain aerosol–cloud adjustments and reduce uncertainty in simulated cloud liquid water path responses by approximately 15%, yielding stronger constraints on historical aerosol cooling effects. The work further established precipitation processes as a dominant control on aerosol–cloud interactions and Earth system predictability.

Gordon, Hamish [Department of Chemical Engineering↗
DOE OSTI2024

Mechanical and Thermal Forcing for Upslope Flows and Cumulus Convection over the Sierras de Córdoba

Abstract The upslope flow processes affecting the vertical extent of orographic cumulus convection are examined using observations from the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. Specifically, clear air returns from the U.S. Department of Energy (DOE) second-generation C-band scanning Atmospheric Radiation Measurement (ARM) precipitation radar (CSAPR2) are used to characterize the structure and variability of the ridge-normal (i.e., up/downslope) flow components, which transport mass to the crest of Argentina’s Sierras de Córdoba and contribute to convective initiation. Data are compiled for the entire CACTI period (October–April), including days with clear skies, shallow cumuli, cumulus congestus, and deep convection. To examine shared variability among >70 000 radar scans, we use (i) a principal component analysis (PCA) to isolate modes of variability in the upslope flow and (ii) composite analysis based on convective outcomes, determined from GOES-16 satellite observations. These data are contextualized with observed surface sensible heat fluxes, thermodynamic profiles, and synoptic-scale analysis. Results indicate distinct thermally and mechanically forced upslope flow modes, modulated by diurnal heating and synoptic-scale variations, respectively. In some instances, there is a superposition of thermal and mechanical forcing, yielding either deeper or shallower upslope flow. The composite analyses based on satellite data show that successively deeper convective outcomes are associated with successively deeper upslope flow layers that more readily transport mass to the ridge crest in conjunction with lower lifting condensation levels, facilitating convective initiation. These results help to isolate the forcing mechanisms for orographic convection and thus provide a foundation for parameterizing orographic convective processes in coarse resolution models.

Meteorology & Atmospheric Sciences↗
DOE OSTI2023

Earth-system-model evaluation of cloud and precipitation occurrence for supercooled and warm clouds over the Southern Ocean's Macquarie Island

Abstract. Over the remote Southern Ocean (SO), cloud feedbacks contribute substantially to Earth system model (ESM) radiative biases. The evolution of low Southern Ocean clouds (cloud-top heights < ∼ 3 km) is strongly modulated by precipitation and/or evaporation, which act as the primary sink of cloud condensate. Constraining precipitation processes in ESMs requires robust observations suitable for process-level evaluations. A year-long subset (April 2016–March 2017) of ground-based profiling instrumentation deployed during the Macquarie Island Cloud and Radiation Experiment (MICRE) field campaign (54.5∘ S, 158.9∘ E) combines a 95 GHz (W-band) Doppler cloud radar, two lidar ceilometers, and balloon-borne soundings to quantify the occurrence frequency of precipitation from the liquid-phase cloud base. Liquid-based clouds at Macquarie Island precipitate ∼ 70 % of the time, with deeper and colder clouds precipitating more frequently and at a higher intensity compared to thinner and warmer clouds. Supercooled cloud layers precipitate more readily than layers with cloud-top temperatures > 0 ∘C, regardless of the geometric thickness of the layer, and also evaporate more frequently. We further demonstrate an approach to employ these observational constraints for evaluation of a 9-year GISS-ModelE3 ESM simulation. Model output is processed through the Earth Model Column Collaboratory (EMC2) radar and lidar instrument simulator with the same instrument specifications as those deployed during MICRE, therefore accounting for instrument sensitivities and ensuring a coherent comparison. Relative to MICRE observations, the ESM produces a smaller cloud occurrence frequency, smaller precipitation occurrence frequency, and greater sub-cloud evaporation. The lower precipitation occurrence frequency by the ESM relative to MICRE contrasts with numerous studies that suggest a ubiquitous bias by ESMs to precipitate too frequently over the SO when compared with satellite-based observations, likely owing to sensitivity limitations of spaceborne instrumentation and different sampling methodologies for ground- versus space-based observations. Despite these deficiencies, the ESM reproduces the observed tendency for deeper and colder clouds to precipitate more frequently and at a higher intensity. The ESM also reproduces specific cloud regimes, including near-surface clouds that account for ∼ 25 % of liquid-based clouds during MICRE and optically thin, non-precipitating clouds that account for ∼ 27 % of clouds with bases higher than 250 m. We suggest that the demonstrated framework, which merges observations with appropriately constrained model output, is a valuable approach to evaluate processes responsible for cloud radiative feedbacks in ESMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Can the GPM IMERG Final Product Accurately Represent MCSs’ Precipitation Characteristics over the Central and Eastern United States?

Mesoscale convective systems (MCSs) play an important role in water and energy cycles as they produce heavy rainfall and modify the radiative profile in the tropics and midlatitudes. An accurate representation of MCSs’ rainfall is therefore crucial in understanding their impact on the climate system. The V06B Integrated Multisatellite Retrievals from Global Precipitation Measurement (IMERG) half-hourly precipitation final product is a useful tool to study the precipitation characteristics of MCSs because of its global coverage and fine spatiotemporal resolutions. However, errors and uncertainties in IMERG should be quantified before applying it to hydrology and climate applications. This study evaluates IMERG performance on capturing and detecting MCSs’ precipitation in the central and eastern United States during a 3-yr study period against the radar-based Stage IV product. The tracked MCSs are divided into four seasons and are analyzed separately for both datasets. IMERG shows a wet bias in total precipitation but a dry bias in hourly mean precipitation during all seasons due to the false classification of nonprecipitating pixels as precipitating. These false alarm events are possibly caused by evaporation under the cloud base or the misrepresentation of MCS cold anvil regions as precipitating clouds by the algorithm. IMERG agrees reasonably well with Stage IV in terms of the seasonal spatial distribution and diurnal cycle of MCSs precipitation. A relative humidity (RH)-based correction has been applied to the IMERG precipitation product, which helps reduce the number of false alarm pixels and improves the overall performance of IMERG with respect to Stage IV.

54 ENVIRONMENTAL SCIENCES↗