Results for “collision risk”

NASA NTRS2015

Total Probability of Collision as a Metric for Finite Conjunction Assessment and Collision Risk Management

On-orbit collision risk is becoming an increasing mission risk to all operational satellites in Earth orbit. Managing this risk can be disruptive to mission and operations, present challenges for decision-makers, and is time-consuming for all parties involved. With the planned capability improvements to detecting and tracking smaller orbital debris and capacity improvements to routinely predict on-orbit conjunctions, this mission risk will continue to grow in terms of likelihood and effort. It is very real possibility that the future space environment will not allow collision risk management and mission operations to be conducted in the same manner as it is today. This paper presents the concept of a finite conjunction assessment-one where each discrete conjunction is not treated separately but, rather, as a continuous event that must be managed concurrently. The paper also introduces the Total Probability of Collision as an analogous metric for finite conjunction assessment operations and provides several options for its usage in a Concept of Operations.

Conjunction Assessment↗

NASA NTRS2024

A Method of Compliance for Achieving Target Collision Risk in UTM Operations

This work proposes a method of compliance to ensure that the collision risks among small unmanned aircraft systems meet the target level of safety. This method presents what is needed for a strategic conflict detection service to achieve the target level of safety when conflict between operational intents are not permitted in nominal situations. A volume-based collision risk model is first developed to calculate the UA-to-UA collision risk given any two operational intent volumes. With this collision risk model, a test strategy is then proposed to assess if a strategic conflict detection service can reduce the collision risk and meet the target level of safety. The method also specifies operational data that are required to be collected to verify if requirements on conformance are being met. Additionally, two new requirements are identified and proposed by this method beyond the current standard for strategic conflict detection. In the sensitivity analysis, three main factors contributing to the collision risk are investigated. The analysis shows that buffers should be considered in a strategic conflict detection service when deconflicting operational intents. The results also reveal that the selection of test cases plays an important role in evaluating the strategic conflict detection service, and they should be representative and sufficiently complex in evaluation tests.

Collision Risk↗

NASA NTRSDate not supplied

A Method of Compliance for Achieving Target Collision Risk in UTM Operations

This work proposes a method of compliance to ensure that the collision risks among small unmanned aircraft systems meet the target level of safety. This method presents what is needed for a strategic conflict detection service to achieve the target level of safety when conflict between operational intents are not permitted in nominal situations. A volume-based collision risk model is first developed to calculate the UA-to-UA collision risk given any two operational intent volumes. With this collision risk model, a test strategy is then proposed to assess if a strategic conflict detection service can reduce the collision risk and meet the target level of safety. The method also specifies operational data that are required to be collected to verify if requirements on conformance are being met. Additionally, two new requirements are identified and proposed by this method beyond the current standard for strategic conflict detection. In the sensitivity analysis, three main factors contributing to the collision risk are investigated. The analysis shows that buffers should be considered in a strategic conflict detection service when deconflicting operational intents. The results also reveal that the selection of test cases plays an important role in evaluating the strategic conflict detection service, and they should be representative and sufficiently complex in evaluation tests.

UTM↗

NASA NTRSDate not supplied

A Method of Compliance for Achieving Target Collision Risk in UTM Operations

This work proposes a method of compliance to ensure that the collision risks among small unmanned aircraft systems meet the target level of safety. This method presents what is needed for a strategic conflict detection service to achieve the target level of safety when conflict between operational intents are not permitted in nominal situations. A volume-based collision risk model is first developed to calculate the UA-to-UA collision risk given any two operational intent volumes. With this collision risk model, a test strategy is then proposed to assess if a strategic conflict detection service can reduce the collision risk and meet the target level of safety. The method also specifies operational data that are required to be collected to verify if requirements on conformance are being met. Additionally, two new requirements are identified and proposed by this method beyond the current standard for strategic conflict detection. In the sensitivity analysis, three main factors contributing to the collision risk are investigated. The analysis shows that buffers should be considered in a strategic conflict detection service when deconflicting operational intents. The results also reveal that the selection of test cases plays an important role in evaluating the strategic conflict detection service, and they should be representative and sufficiently complex in evaluation tests.

UTM, Method of Compliance, collision risk↗

NASA NTRSDate not supplied

3D Representation of UAV-obstacle Collision Risk Under Off-nominal Conditions

Safe operations of autonomous unmanned aerial vehicles (UAVs) in low-altitude airspace with beyond visual line-of-sight (BVLOS) flights demand robust risk monitoring of airspace as well as of people and property on ground. One of the safety critical factors for UAV flights is the risk of collision with static and dynamic obstacles in proximity to its flight path. This paper presents a detailed formulation of risk of obstacle collision incorporating the effects of off-nominal conditions introduced by component failures, degraded controllability and environmental disturbances such as wind gusts. The risk is represented in terms of a matrix with rows corresponding to the likelihood of occurrence of collision and columns representing severity of collision to the vehicle and surrounding structures. Risk likelihood is generated using a Bayesian Belief Network (BBN) that compiles knowledge from related Failure Modes and Effects Analysis (FMEAs) and Subject Matter Experts (SMEs) to determine the probability of collision based on on-board sensor measurements indicative of vehicle health and controllability. Risk severity is computed utilizing a point-mass 3D kinematic model of the vehicle in presence of wind. The proposed risk factor is demonstrated on real flight data from experimental flights of an octocopter at NASA Langley Research Center in presence of simulated obstacles and wind conditions. Effect of varying wind conditions, level of controllability and obstacle measurement noise on the risk factor is demonstrated. The proposed approach enables risk-informed decision making for timely mitigation of current and future unsafe events in autonomous systems.

risk analysis↗

NASA NTRS1999

The Use of the Satellite Breakup Risk Assessment Model (SBRAM) to Characterize Collision Risk to Manned Spacecraft

NASA uses environment models such as ORDEM96 to characterize the long-term orbital debris collision hazard for spacecraft in LEO. Occasionally, however, there are breakups of satellites or rocket bodies that create enhanced collision hazard for a period of time. This enhanced collision hazard can pose increased risks to space operations - especially those involving manned missions where the tolerance for risk is very low. NASA has developed SBRAM to simulate the enhanced debris environment in the days and weeks that follow such a breakup. This simulation provides the kind of risk probabilities that can be used by mission planners to consider if changes are warranted for the mission. Announcements of breakups come to NASA from US Space Command as soon as they are identified. The pre-breakup orbit and time of breakup are used to determine the initial conditions of the explosion. SBRAM uses the latest explosion models developed at NASA to simulate a debris cloud for the breakup. The model uses a Monte Carlo technique to create a random debris cloud from the probability distributions in the breakup model. Each piece of debris randomly created in the cloud is propagated in a deterministic manner to include the effects of drag and other orbital perturbations. The detailed geometry of each simulated close approach to the target spacecraft is noted and logged and the collision probability is computed using an estimated probability density in down-range and cross-range positions of both the target spacecraft and debris object. The collision probability is computed from the overlap of these probability densities for each close-approach geometry and summed over all computed conjunctions. Cloud propagation runs over the desired time interval are then repeated until the scale of the collision risk can be estimated to a desired precision. This paper presents an overview of the SBRAM model and a number of examples, both real and hypothetical, to demonstrate its use. In addition, a number of different examples are shown how the data can be used by decision makers on issues such as spacecraft orientation and timing of EVAs.

Matney, Mark J.↗

NASA NTRSDate not supplied

3D Representation of UAV-obstacle Collision Risk under off-nominal conditions

Safe operations of autonomous unmanned aerial vehicles (UAVs) in low-altitude airspace with beyond visual line-of-sight (BVLOS) flights demand robust risk monitoring of airspace as well as of people and property on ground. One of the safety critical factors for UAV flights is the risk of collision with static and dynamic obstacles in proximity to its flight path. This paper presents a detailed formulation of risk likelihood of obstacle collision incorporating the effects of off-nominal conditions introduced by component failures, degraded controllability and environmental disturbances such as wind gusts. The deviation in the planned trajectory caused due to wind is computed utilizing a point-mass 3D kinematic simulation model of the vehicle. Likelihood of risk for the flight plan is then analyzed based on generating the probability of collision for each point in the trajectory. The proposed risk factor is demonstrated on real flight data from experimental flights of an octocopter at NASA Langley Research Center in presence of simulated obstacles and wind conditions. Effect of varying wind conditions, distance from obstacles, level of controllability and obstacle measurement noise on the risk factor is demonstrated. The proposed approach enables risk-informed decision making for timely mitigation of current and future unsafe events in autonomous systems.

Portia Banerjee↗

NASA NTRS2011

Limiting Future Collision Risk to Spacecraft: An Assessment of NASA's Meteoroid and Orbital Debris Programs

Over the past 50 years, various NASA communities have contributed significantly to maturing NASA s meteoroid and orbital debris (MMOD)1 programs to their current state. As a result of these community efforts, and to NASA s credit, NASA s MMOD programs and models are now widely used and respected by the providers and users of both government and commercial satellites, nationally as well as internationally. Satellites have been redesigned to protect critical components from MMOD damage by moving critical components from exterior surfaces to deep inside a satellite s structure. Orbits are monitored and altered to minimize the risk of collision with tracked orbital debris. MMOD shielding added to the International Space Station (ISS) protects critical components and astronauts from potentially catastrophic damage that might result from smaller, untracked debris and meteoroid impacts. The space shuttle, as it orbited Earth, and whether docked to the ISS or not, was optimally oriented to protect its fragile thermal protection and thermal radiation systems from MMOD damage. In addition, astronauts inspected its thermal protection system for MMOD damage before the shuttle reentered Earth s atmosphere; Orion, NASA s capsule to carry astronauts to low Earth orbit, includes designs to mitigate the threat of MMOD damage and provide increased safety to the crew. When a handful of reasonable assumptions are used in NASA s MMOD models, scenarios are uncovered that conclude that the current orbital debris environment has already reached a "tipping point." That is, the amount of debris - in terms of the population of large debris objects, as well as overall mass of debris in orbit - currently in orbit has reached a threshold where it will continually collide with itself, further increasing the population of orbital debris. This increase will lead to corresponding increases in spacecraft failures, which will only create more feedback into the system, increasing the debris population growth rate. The increase thus far has been most rapid in low Earth orbit (LEO), with geosynchronous Earth orbits (GEOs) potentially suffering the same fate, but over a much longer time period. The exact timing and pace of this exponential growth are uncertain, but the serious implications of such a scenario require careful attention because of the strategic importance of U.S. space operations. The Office of Science and Technology Policy and the Office of Management and Budget contracted with the National Research Council for a study to perform three tasks: review NASA s MMOD programs and efforts, recommend in which of those NASA should increase or decrease its effort or change focus, and determine whether NASA should pursue work in any new MMOD areas. The official letter requesting the study and the full statement of task for the Committee for the Assessment of NASA s Orbital Debris Programs are in Appendixes A and B, respectively.

Source record↗

DOE OSTI2021

Sea Ice Collision Risk Assessment for Tidal Turbine Siting in Cook Inlet, Alaska

Cook Inlet has great potential for tidal stream energy development. However, the presence of drifting sea ice could create hazardous collision risks for tidal turbine farms. Before turbines can be installed in Cook Inlet, sites must be surveyed to determine how often sea ice is present, how fast it will be moved by the current, and where the trajectories of drifting sea ice will be concentrated. In this study, we use remotely sensed data to characterize the seasonal sea ice conditions in Cook Inlet, a hydrodynamic model to map the water velocities, and a particle trajectory tracking model to calculate collision risks. The resulting sea ice coverage and collision risk maps will enable tidal energy developers to choose the best locations for the deployment of tidal turbines and other offshore platforms in Cook Inlet.

16 TIDAL AND WAVE POWER↗

NASA NTRS2007

Detection of Orbital Debris Collision Risks for the Automated Transfer Vehicle

In this paper, we present a general collision risk assessment method, which has been applied through numerical simulations to the Automated Transfer Vehicle (ATV) case. During ATV ascent towards the International Space Station, close approaches between the ATV and objects of the USSTRACOM catalog will be monitored through collision rosk assessment. Usually, collision risk assessment relies on an exclusion volume or a probability threshold method. Probability methods are more effective than exclusion volumes but require accurate covariance data. In this work, we propose to use a criterion defined by an adaptive exclusion area. This criterion does not require any probability calculation but is more effective than exclusion volume methods as demonstrated by our numerical experiments. The results of these studies, when confirmed and finalized, will be used for the ATV operations.

Peret, L.↗

DOE OSTI2020

2020 State of the Science Report, Chapter 3: Collision Risk for Animals around Turbines

The potential for marine animals to encounter and collide with turbines, especially tidal and river turbines, along with the biological, ecological, and regulatory consequences of any such interactions, remain active areas of research and topics of global interest. Uncertainty and knowledge gaps associated with collision risk continue to present challenges within consenting/permitting (hereafter consenting) processes for turbine developments. Consequently, collision risk continues to be the focus of significant research effort, which in recent years has included environmental monitoring of operational devices and arrays. This chapter addresses the overall progress and growth in knowledge across this topic area, and specific progress related to marine mammals, fish, and seabirds. https://tethys.pnnl.gov/publications/state-of-the-science-2020-chapter-3-collision

13 HYDRO ENERGY↗

DOE OSTI2022

Capabilities of an Acoustic Camera to Inform Fish Collision Risk with Current Energy Converter Turbines

A diversified energy portfolio may include marine energy in the form of current energy converters (CECs) such as tidal or in-river turbines. New technology development in the research stage typically requires monitoring for environmental effects. A significant environmental effect of concern for CECs is the risk of moving parts (e.g., turbine blades) colliding with animals such as fishes. CECs are installed in energetic locations in which it is difficult to operate sensors to fulfill monitoring requirements for informing collision risk. Collecting data (i.e., about blade strikes or near-misses) that inform interactions of fishes with CECs is usually attempted using active acoustic sensors or video cameras (VCs). Limitations of low-light conditions or water turbidity that preclude effective use of VCs are overcome by using high-resolution multibeam echosounders (or acoustic cameras (ACs)). We used an AC at two sites to test its ability to detect artificial and real fish targets and determine if strike, near-miss, and near-field behavior could be observed. Interactions with fish and artificial targets with turbines have been documented but strike confirmation with an AC is novel. The first site was in a tidal estuary with a 25 kW turbine and water clarity sufficient to allow VC data to be collected concurrently with AC data showing turbine blade strike on tethered artificial fish targets. The second site was a turbid, debris-laden river with a 5 kW turbine where only AC data were collected due to high water turbidity. Data collection at the second site coincided with downstream Pacific salmon (Oncorhynchus spp.) smolt migration. Physical fish capture downstream of the turbine was performed with an incline plane trap (IPT) to provide context for the AC observations, by comparing fish catches. Discrimination between debris and fishes in the AC data was not possible, because active movement of fishes was not discernable. Nineteen fishes were released upstream of the turbine to provide known times of possible fish/turbine interactions, but detection was difficult to confirm in the AC data. ACs have been used extensively in past studies to count large migratory fish such as Pacific salmon, but their application for small fish targets has been limited. The results from these two field campaigns demonstrate the ability of ACs to detect targets in turbid water and observe blade strikes, as well as their limitations such as the difficulty of distinguishing small fishes from debris in a high-energy turbid river. Recommendations are presented for future applications associated with CEC device testing.

16 TIDAL AND WAVE POWER↗

NASA NTRS2009

Wind Characterization for the Assessment of Collision Risk During Flight Level Changes

A model of vertical wind gradient is presented based on National Oceanic and Atmospheric Administration (NOAA) wind data. The objective is to have an accurate representation of wind to be used in Collision Risk Models (CRM) of aircraft procedures. Depending on how an aircraft procedure is defined, wind and the different characteristics of the wind will have a more severe or less severe impact on distances between aircraft. For the In-Trail Procedure, the non-linearity of the vertical wind gradient has the greatest impact on longitudinal distance. The analysis in this paper extracts standard deviation, mean, maximum, and linearity characteristics from the NOAA data.

Carreno, Victor↗

NASA NTRSDate not supplied

Potential of Detect and Avoid in the Flight Deck to Mitigate Collision Risk

Explore the source record for details and available documents.

Detect and Avoid↗

NASA NTRS2014

Middle Man Concept for In-Orbit Collision Risks Mitigation, CAESAR and CARA Examples

This paper describes the conjunction analysis which has to be performed using data provided by JSpOC. This description not only demonstrates that Collision Avoidance is a 2- step process (close approach detection followed by risk evaluation for collision avoidance decision) but also leads to the conclusion that there is a need for a Middle Man role. After describing the Middle Man concept, this paper introduces two examples with their similarities and particularities: the American civil space effort delivered by the NASA CARA team (Conjunction Assessment Risk Analysis) and the French response CAESAR (Conjunction Assessment and Evaluation Service: Alerts and Recommendations). For both, statistics are presented and feedbacks discussed. All together, around 80 satellites are served by CARA and/or CAESAR. Both processes regularly evolve in order either to follow JSpOC upgrades or to improve analysis according to experience acquired during the past years.

conjunction↗

DOE OSTI2024

Lab Collaboration Project (LCP) for Marine Energy: Quantifying Collision Risk for Fish and Turbines Final Technical Report (Task 10)

A persistent environmental concern for the widespread deployment of tidal turbines is the potential for fish and marine mammals to collide with rotating blades (Copping et al. 2016, Copping and Hemery 2020). This is a consequence of well-documented bird and bat mortalities around wind turbines (Smallwood 2007, Thompson et al. 2017), as well as fish mortality at conventional hydropower dams (Pracheil et al. 2016) and tidal barrages (Dadswell and Rulifson 1994). However, unlike hydropower dams or barrages, tidal turbines do not involve structures that channel all flow through the turbines. Similarly, while functionally similar to wind turbines, tidal turbines often operate at lower relative velocities and, depending on the end-use application, may be significantly smaller than utility-scale wind turbines. Both of these factors reduce the likelihood and severity of collision, but the knowledge base on this topic remains limited.

13 HYDRO ENERGY↗

DOE OSTI2023

A Probabilistic Methodology for Determining Collision Risk of Marine Animals with Tidal Energy Turbines

Commercial development of tidal stream energy is hampered by technical and financial challenges, and impeded by uncertainty about potential environmental effects that drive environmental risk assessments and permitting (consenting) processes. The effect of greatest concern for operational tidal stream energy devices is the potential for marine animals to collide with turbine blades, resulting in injury or death. Due to the turbulent and often turbid waters that frequently characterize tidal turbine sites, there is an absence of empirical evidence about collisions with marine animals. This paucity of observations often leads to risk-averse permitting decisions that further restrict the deployment of tidal energy devices that are needed to collect this evidence. This paper relies on the framework of stressors and receptors that is widely used in marine energy studies and outlines a stepwise probabilistic methodology that applies existing knowledge to further elucidate the risk to marine animals from operational tidal turbines. A case study using striped bass from the Bay of Fundy, Canada, accompanies the methodology, to partially demonstrate its application.

16 TIDAL AND WAVE POWER↗

NASA NTRS2018

Global Precipitation Measurement (GPM) Core Satellite & International Space Station (ISS) Coordination for CubeSat Deployments to Minimize Collision Risk

The Global Precipitation Measurement Mission (GPM) is a joint U.S. and Japan mission to observe global precipitation, extending the Tropical Rainfall Measuring Mission (TRMM) data set, which was launched by H-IIA from Tanegashima in Japan on February 28TH, 2014 directly into its 407km operational orbit. The International Space Station (ISS) is an international human research facility operated jointly by Russia and the USA from NASA's Johnson Space Center (JSC) in Houston Texas. Mission priorities lowered the operating altitude of ISS from 415km to 400km in early 2015, effectively placing both vehicles into the same orbital regime. The ISS has begun a program of deployments of cost effective CubeSats from the ISS that allow testing and validation of new technologies. With a major NASA asset flying at the same effective altitude as the ISS, CubeSat deployments became a serious threat to GPM and therefore a significant indirect threat to the ISS. This presentation describes the specific problem of collision threat to GPM and risk to ISS CubeSat deployment, the process that was implemented to keep both missions safe from collision and maximize their project goals, and the history of the process since implementation.

GPM↗