Search NASA⌕ Search

SEARCH · Search NASA

Results for “color index”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Effect of Extinction on Quasar Luminosity Distances Determined from UV and X-Ray Flux Measurements

Abstract In Khadka et al., a sample of X-ray-detected reverberation-mapped quasars was presented and applied for the comparison of cosmological constraints inferred using two well-established relations in active galactic nuclei—the X-ray/UV luminosity ( L X – L UV ) relation and the broad-line region radius–luminosity ( R – L ) relation. L X – L UV and R – L luminosity distances to the same quasars exhibit a distribution of their differences that is generally asymmetric and positively shifted for the six cosmological models we consider. We demonstrate that this behavior can be interpreted qualitatively as arising as a result of the dust extinction of UV/X-ray quasar emission. We show that the extinction always contributes to the nonzero difference between L X – L UV -based and R – L -based luminosity distances and we derive a linear relationship between the X-ray/UV color index E X −UV and the luminosity-distance difference, which also depends on the value of the L X – L UV relation slope. Taking into account the median and the peak values of the luminosity-distance difference distributions, the average X-ray/UV color index falls in the range of E ¯ X − UV = 0.03 – 0.28 mag for the current sample of 58 sources. This amount of extinction is typical for the majority of quasars and can be attributed to the circumnuclear and interstellar media of host galaxies. After applying the standard hard X-ray and far-UV extinction cuts, heavily extincted sources are removed but overall the shift toward positive values persists. The effect of extinction on luminosity distances is more pronounced for the L X – L UV relation since the extinction of UV and X-ray emissions both contribute.

Astronomy & Astrophysics↗
DOE OSTI2020

Intrinsic Color Indices of Early-type Dwarf Stars

Early-type stars are short lived and scarce in comparison with other types. Based on the recently released catalogs of early-type stars from the largest Large Sky Area Multi-Object Fiber Spectroscopic Telescope spectroscopic survey, the intrinsic colors of the stars with effective temperature up to 32,000 K are determined for the bands from ultraviolet to infrared using the blue-edge method. Analytic relations are derived for the intrinsic color index with the effective temperature for the Wide-field Infrared Survey Explorer, Two Micron All Sky Survey, Gaia, AAVSO Photometric All-Sky Survey, Sloan Digital Sky Survey, the Panoramic Survey Telescope and Rapid Response System 1, and Galaxy Evolution Explorer bands. The results are generally consistent with previous works. In addition, the intrinsic colors of O-type dwarfs and OB supergiants are roughly estimated.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

MCG+07-20-052: Interacting Dwarf Pair in a Group Environment

We present an observational study of the interacting pair of dwarf galaxies, MCG+07-20-052, in the vicinity of Milky Way mass spiral galaxy NGC 2998. MCG+07-20-052 is located at a sky-projected distance of 105 kpc from NGC 2998 and the two have a relative line-of-sight velocity of 60 km s{sup −1}. We observed tidal tail-like extensions on both members (D1 and D2) of the interacting pair MCG+07-20-052. The interacting dwarf galaxies, D1 and D2, have B-band absolute magnitudes of −17.17 and −17.14 mag, respectively, and D2 is significantly bluer than D1. We obtained H i 21 cm line data of the NGC 2998 system using the Giant Metrewave Radio Telescope to get a more detailed view of the neutral hydrogen (H i) emission in the interacting dwarf galaxies and in the galaxy members of the NGC 2998 group. Evidence of a merger between the dwarf galaxies in the MCG+07-20-052 is also present in the H i kinematics and morphology where we find that H i is mostly concentrated around D2, which also shows a higher level of star-forming activity and a bluer g–r color index compared to D1. In addition, we detect extended tenuous H i emission around another member galaxy, NGC 3006, located close to the MCG+07-20-052 pair at a sky-projected distance of 41 kpc. We compare here our results from the MCG+07-20-052 pair NGC 2998 system with other known Large Magellanic Cloud/Small Magellanic Cloud/Milky Way-type systems and discuss the possible origin of the dwarf–dwarf interaction.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Radial Segregation between Red Giant Populations in the Globular Cluster NGC 3201: Tentative Role of Varying Mass among the Progenitors

In the globular cluster NGC 3201, we study subpopulations (SPs) of red giants (RGs) distinguished by their characteristics. In its central part, we make use of multicolor Hubble Space Telescope (HST) photometry coupled with spectroscopy of RGs spread out over a larger cluster face. In the color index CI = (m{sub F275W}−m{sub F336W}) −(m{sub F336W}−m{sub F439W}), RGs commonly referred to as first generation, SPI, are separated from the counterparts of the second generation, SPII. The latter are more concentrated than the former at a confidence level of P = 93%, within the field covered by the HST photometry. Their minor portion (∼28%, SPIIm) located in the middle of the δCI range spanned across the split RG branch relative to the splitting edge is more centrally concentrated at a higher confidence level of 96%. We found, from the [Na/Fe]−δCI plot for RGs in common between the photometry and spectroscopy, that SPI and SPII are mostly overlapped within 0.0 < [Na/Fe] < 0.3. RGs with [Na/Fe] < 0.0 (mostly SPI) keep their lower concentration to the cluster center over larger radial distance as compared to SPII RGs with [Na/Fe] > 0.3 at a confidence level of P = 88%. It is increased up to 95% if a restriction on [O/Fe] is imposed. The obtained result, particularly in the central part, is a clue that SPIIm RGs are the descendants of more massive progenitors. Of these RGs approximately one-third probably originate from recent (within the past 1.5 Gyr) blue stragglers with M {sub BS} > 1.1M {sub ☉}, and the other two-thirds could be accounted for by older collision products of primordial MS stars.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

AX UMa, an ab-type RR Lyrae Star with a Rapidly Decreasing Pulsation Period, and Its Binarity

The pulsation periods of RR Lyrae stars usually vary with time, and they are often used as probes to study the mechanism behind the variation. After the early discovery that the pulsation period of the RR Lyrae star AX UMa decreased rapidly, in further research, we made multiband photometric observations of this star using the Sino-Thai 70 cm telescope and the 60 cm telescope at Yunnan Observatories, and collected its light-curve data from several photometry sky surveys. The O–C diagram confirmed that AX UMa has a rapid period decrease with a rate of −7.752 ± 0.005 days Myr{sup −1}, which indicates that it is the fastest-period decreasing ab-type RR Lyrae star in the Galactic field. Moreover, the O – C residuals contain additional periodic variations. We suppose that the variation with a long period is probably caused by the light-travel time effect as the star orbits in a binary system. The calculation shows that the lower mass limit of the companion is about 1 M {sub ⊙}. Combined with the full amplitudes and color indexes, we suggested that the companion is probably a hot subdwarf star. We compared the light curves of AX UMa and those of another binary evolution pulsator, OGLE-BLG-RRLYR-02792, and found that the former shows the characteristics of ab-type RR Lyrae stars, while the latter is more like an extreme long-period c-type RR Lyrae star. However, the absence of a bump in the light curves implies that the mass loss has occurred in the outer atmosphere of AX UMa. The special features of AX UMa make it worth more attention and further observations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Model Light Curves for Type Ib and Ic Supernovae

Using the Monte Carlo code SEDONA, multiband photometry and spectra are calculated for supernovae derived from stripped helium stars with presupernova masses of 2.2 to 10.0 M ⊙ . The models are representative of evolution in close binaries and have previously been exploded using a parameterized one-dimensional model for neutrino transport. A subset, those with presupernova masses in the range of 2.2–5.6 M⊙, have many properties in common with observed Type Ib and Ic supernovae, including a median ejected mass near 2 M ⊙ , explosion energies near 1 × 10 51 erg, typical 56 Ni masses of 0.07–0.09 M ⊙ , peak times of about 20 days, and a narrow range for the V - R color index 10 days post-V-maximum near 0.3 mag. The median peak bolometric luminosity, near 10 42.3 erg s -1 , is fainter, however, than several observational tabulations, and the brightest explosion has a bolometric luminosity of only 10 42.50 erg s -1 . The brightest absolute B, V, and R magnitudes at peak are -17.2, -17.8, and -18.0. These limits are fainter than some allegedly typical Type Ib and Ic supernovae and could reflect problems in our models or in the observational analysis. Helium stars with lower and higher masses also produce interesting transients that may have been observed, including fast, faint, blue transients and long, red, faint Type Ic supernovae. New models are specifically presented for SN 2007Y, SN 2007gr, SN 2009jf, LSQ 13abf, SN 2008D, and SN 2010X.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Conditional H I Mass Functions and the H I -to-halo Mass Relation in the Local Universe

We present a new H I mass estimator that relates log 10 (M HI /M * ) to a linear combination of four galaxy properties: stellar surface mass density, color index u - r, stellar mass, and concentration index, with the scatter of individual galaxies around the mean H I mass modeled with a Gaussian distribution function. We calibrate the estimator using the xGASS sample, including both H I detection and nondetection, and constrain the model parameters through Bayesian inferences. Tests with mock catalogs demonstrate that our estimator provides unbiased H I masses for optical samples like SDSS. We apply our estimator to the SDSS spectroscopic sample to estimate the H I mass function (HIMF) of local galaxies, as well as the conditional H I mass function in galaxy groups and the H I –halo mass relation. Our HIMF agrees with the ALFALFA measurements at M HI ≳ 5 × 10 9 M ⊙ , but with higher amplitude and a steeper slope at lower masses. We show that this discrepancy is caused primarily by the cosmic variance, which is corrected for the SDSS sample but not for ALFALFA. The total CHIMFs for all halo masses can be described by a single Schechter function, while those of central galaxies show a double-Gaussian profile. The total H I mass in a group increases monotonically with halo mass, but for central galaxies, the H I mass shows weak dependence on halo mass when M h ≳ 10 12 M ⊙ . The observed H I –halo mass relation is not reproduced by current hydrodynamic simulations and semianalytic models of galaxy formation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Solid-State Lighting Using Side-by-Side White Phosphorescent Organic Light-Emitting Diodes

White organic light-emitting diodes (WOLEDs) have become increasingly popular for use in solid-state illumination, where diffuse, large area light sources that achieve a high color rendering index and luminous power efficiency are desirable. Color-tunable emission, where the light source combines emission from multiple, separately addressed color elements, is conveniently provided by WOLEDs for the purpose of adapting the lighting source to a particular illumination requirement. In this work, we demonstrate a method for side-by-side positioning of monochromatic blue and yellow phosphorescent OLED stripes that are combined to create tunable white light, using a high resolution mechanical peel-off patterning method. We achieve a peak luminous power efficiency of 17.1 ± 0.3 lm W –1 and an external quantum efficiency of 11.8 ± 0.2% and demonstrate color tunability of the 1960 Commission Internationale d’Eclairage chromaticity coordinates from (u,v) = (0.33,0.36) to (0.12,0.32). This corresponds to a tuning rnge of the color rendering index from 74 ± 1 to 86 ± 1 and the correlated color temperature from 2000 to 8000 ± 500 K. Here, due to the nondestructive nature of the peel-off technique, patterned devices exhibit a lifetime comparable to conventional, shadow mask-patterned devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Color-neutral, semitransparent organic photovoltaics for power window applications

Semitransparent organic photovoltaic cells (ST-OPVs) are emerging as a solution for solar energy harvesting on building facades, rooftops, and windows. However, the trade-off between power-conversion efficiency (PCE) and the average photopic transmission (APT) in color-neutral devices limits their utility as attractive, power-generating windows. A color-neutral ST-OPV is demonstrated by using a transparent indium tin oxide (ITO) anode along with a narrow energy gap nonfullerene acceptor near-infrared (NIR) absorbing cell and outcoupling (OC) coatings on the exit surface. The device exhibits PCE = 8.1 ± 0.3% and APT = 43.3 ± 1.2% that combine to achieve a light-utilization efficiency of LUE = 3.5 ± 0.1%. Commission Internationale d’eclairage chromaticity coordinates of (0.38, 0.39), a color-rendering index of 86, and a correlated color temperature of 4,143 K are obtained for simulated AM1.5 illumination transmitted through the cell. Using an ultrathin metal anode in place of ITO, we demonstrate a slightly green-tinted ST-OPV with PCE = 10.8 ± 0.5% and APT = 45.7 ± 2.1% yielding LUE = 5.0 ± 0.3% These results indicate that ST-OPVs can combine both efficiency and color neutrality in a single device.

14 SOLAR ENERGY↗
DOE OSTI2022

Measures of illuminant-induced metameric mismatch: theory, comparative analysis, and implications for application

Illuminant-induced metameric mismatch is an important consideration in the specification of light sources for some architectural environments, yet there is currently no standardized performance measure. The goal of this work was to evaluate two recent research proposals: the metameric uncertainty index ( R t ) and the metamer mismatching color rendering index (MMCRI). To compare the relative performance of these two measures, 100,000 spectral power distributions were generated with 3, 4, 5, 6, and 7 Gaussian spectral components and spectral widths varying from 1 nm (monochromatic) to 100 nm. Both measures generally agree with the theory that broadband radiation should cause less metameric mismatch than narrowband radiation. The two measures have relatively better agreement for broadband SPDs and relatively worse agreement for narrower spectra. Despite some similarities, non-parametric statistical tests suggest that R t and MMCRI are significantly different quantifications of illuminant-induced metameric mismatch ( p < 0.0001 for all comparisons). Characteristics of the MMCRI computation that are potentially problematic for applied lighting were observed.

42 ENGINEERING↗
DOE OSTI2023

Efficient Solar Spectrum-Like White-Light Emission in Zinc-Based Zero-Dimensional Hybrid Metal Halides

Organic–inorganic metal halides (OIMHs) with high-efficiency solar spectrum-like emission are attracting broad and current interest. Here, in this work, five 0D Zn-based hybrid halides are synthesized based on aromatic organic cations with different carbon-chain lengths: C 6 H 5 CH 2 NH 3 + (PMA + ) and C 6 H 5 (CH 2 ) 4 NH 3 + (PBA + ). (PMA) 2 ZnCl 4 exhibits the highest photoluminescence quantum yield of 37.2% of reported Zn-based white-emission OIMHs. The emission spectrum of (PBA) 2 ZnI 4 indicates a color rendering index of 98, which is the highest among single-component white-light-emitting phosphors. Spectral characterizations and density functional theory calculations demonstrate that the extremely broad emission of (PBA) 2 ZnI 4 originates from the synergistic emission of organic cations and self-trapped excitons. The optical properties of the obtained (PMA) 2 ZnBr 4 , (PMA) 2 ZnI 4 ·H 2 O, and (PBA) 2 ZnCl 4 are also characterized for comparison, and with the same organic cations, the PLQY decreases from chloride to bromide to iodide. This work demonstrates that the selection of appropriate organics and halogens can enable fine tuning of single-component white-light emission, satisfying varying needs for solid-state lighting.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Color‐Stable, All‐Phosphorescent White Organic Light Emitting Diodes Using the Polariton‐Enhanced Purcell Effect

Abstract The short operational lifetimes of high efficiency phosphorescent organic blue light emitting devices (PHOLEDs) has limited their use in displays and lighting. Previously, this problem has been avoided by using less efficient fluorescent blue devices in separately biased red, green, and blue emissive elements to achieve stable full color emission. However, the operational lifetime of blue phosphorescent OLEDs has been significantly improved through the utilization of the plasmon‐exciton‐polariton‐enhanced (PEP) Purcell effect. Here, a white emitting PHOLED comprising stacked red, green, and blue elements is demonstrated that exploits PEPs to extend the operational lifetime of the blue element such that all emissive layers degrade at the same rate. The device features white light emission with an external quantum efficiency of 19.1 ± 0.4%, luminous power efficiency of 13.3 ± 0.3 lm W −1 at a luminance of 1000 cd m −2 when measured over 4π solid angle, with a color rendering index of 76 unchanged throughout the device aging to 70% of its initial luminance, T 70 . A 2.9 times enhancement in the operational lifetime of the Purcell‐enhanced device is achieved to yield T 70 = 2900 ± 100 h for an initial luminance of 1000 cd m −2 , compared to devices lacking this enhancement with T 70 = 1000 ± 100 h.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electrical Switching of Nematic Plasmonic Nanocolloids for Infrared Solar Gain Control

Controlling solar gain is essential to reduce the energy consumption by residential and commercial buildings, which are responsible for ≈40% of all energy generated globally. However, the dynamic control of solar gain in the near-infrared that corresponds to ≈50% of the overall Sun's energy at the Earth's surface, separately from the visible spectral range has been a challenge, albeit commercial coatings provide passive control while retaining highly visible transmission. To address this problem, in this paper switchable silver colloids (SSCs) are demonstrated, colloidal analogs of the common silver coatings used for solar gain control. When dispersed in a nematic liquid crystal, orientations of such plasmonic silver nanoplates are controlled by ≈1 V low-voltage electric fields, allowing for sub-second switching of the near-infrared-based solar gain. Installed and retrofit products made from thin films of such nanoplate dispersions confined between glass and plastic substrates, respectively, exhibit electrically controlled infrared-based solar gain while retaining high visible-range transparency, low haze, and high color rendering index. Furthermore, this study's findings reveal a great potential of soft-matter systems in addressing energy-related problems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis of Red, Green, and Blue Carbon Quantum Dots and Construction of Multicolor Cellulose-Based Light-Emitting Diodes

Light-emitting diodes (LEDs) are widely used in lighting and display applications. Carbon quantum dots (CQDs), which have high biocompatibility, high resistance to photobleaching, and full-spectrum luminescence, have inherent advantages as fluorescent materials for LED devices. Herein, multicolor CQDs are prepared by a new reagent engineering strategy due to the difference of effective conjugate length and the surface electron-withdrawing groups of CQDs. White CQDs are realized by mixing blue, green, and red CQDs proportionally. Then, the aggregation-caused quenching phenomenon of CQDs is suppressed through the hydrogen-bonding network of cellulose nanofibrils (CNFs). Multicolor fluorescent films are prepared from CQDs and CNFs by simple mixing and casting methods. Finally, thin-film encapsulation based on the photosensitive resin ABPE-10 coating can be realized and rapidly assembles into fluorescent films with different light-emitting colors into LED devices, leading to have superior thermal performance compared with conventional LEDs. White LEDs have excellent white-light illumination performance, with Commission Internationale de L’Eclairage color coordinates of (0.33, 0.37), a correlated color temperature of 5688 K, and a color rendering index of 86. This strategy provides a convenient and scalable pathway for low-cost, environmentally friendly, and high-performance CQDs-based LEDs.

42 ENGINEERING↗
DOE OSTI2025

Tunable broadband luminescence in lead-free hybrid copper halides

Metal halides are an important class of optoelectronic materials combining exceptional optical and electronic properties. An inherent advantage of metal halides is their solution synthesis and processability, which render them as low-cost and environmentally friendly materials for a range of applications from photovoltaics and photodetection to solid-state lighting (SSL). Here, in this study, we synthesized three previously unreported lead-free organic–inorganic hybrid copper halides: (OA) 4 CuX 5 (X = Br, I; OA + = C 8 H 17 NH 3+ , n-octylammonium cation) and (HA) 2 CuI 3 (HA + = C 6 H 13 NH 3 + , n-hexylammonium cation), all of which exhibit broadband emissions arising from self-trapped excitons (STEs). Among these compounds, (OA) 4 CuI 5 demonstrates tunable dual-band white-light emission with a high color rendering index value of 91 at room temperature. Temperature-dependent photoluminescence measurements and first-principles calculations reveal distinct behaviors between the two emission states in (OA) 4 CuI 5 . These findings highlight the potential of copper halide compounds for optoelectronic applications, particularly in the development of environmentally friendly solid-state lighting technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Towards green synthesis of Mn 4+ -doped fluoride phosphors: a review

Mn 4+ -doped fluoride phosphors are attractive for application in white solid-state lighting devices because their distinct red emission can improve the color rendering index, while the earth-abundance of Mn 4+ ions can reduce the production cost. However, highly hazardous HF is used as the fluoride source in the synthesis processes, which requires extreme caution. In this review, we introduce various methods for synthesizing Mn 4+ -doped fluoride phosphors, categorized according to the presence or absence of HF in the synthesis. The underlying optical properties of the phosphors fabricated using the various methods are discussed. In addition, in the discussion of each method, we emphasize on the key factors and strategies for developing phosphors. Finally, this review highlights perspectives on and future directions for the safe synthesis of Mn 4+ -doped fluoride phosphors to achieve solid-state lighting devices with superior optical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Low-Voltage Haze Tuning with Cellulose-Network Liquid Crystal Gels

Being key components of the building envelope, glazing products with tunable optical properties are in great demand because of their potential for boosting energy efficiency and privacy features while enabling the main function of allowing natural light indoors. However, windows and skylights with electric switching of haze and transparency are rare and often require high voltages or electric currents, as well as not fully meet the stringent technical requirements for glazing applications. Here, by introducing a predesigned gel material we describe an approach dubbed “Haze-Switch” that involves low-voltage tuning of the haze coefficient in a broad range of 2–90% while maintaining high visible-range optical transmittance. The approach is based on a nanocellulose fiber gel network infiltrated by a nematic liquid crystal, which can be switched between polydomain and monodomain spatial patterns of optical axis via a dielectric coupling between the nematic domains and the applied external electric field. By utilizing a nanocellulose network of nanofibers ~10 nm in diameter we achieve <10 V dielectric switching and <2% haze in the clear state, as needed for applications in window products. Finally, we characterize physical properties relevant to window and smart glass technologies, like the color rendering index, haze coefficient, and switching times, demonstrating that our material and envisaged products can meet the stringent requirements of the glass industry, including applications such as privacy windows, skylights, sunroofs, and daylighting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Aperiodic optical coatings for neutral-color semi-transparent organic photovoltaics

Semi-transparent organic photovoltaics (ST-OPVs) have the potential for integration with windows for ubiquitous power generating applications. Typically, such applications require that ST-OPVs be neutrally transparent across the visible and exhibit both a high average photopic transmittance (APT) and color rendering index, as well as iso-energetic chromaticity coordinates. In this work, we demonstrate the design and use of optical coatings to achieve ST-OPVs with a neutral visible transmittance of APT = 50%, a power conversion efficiency of 8.3%, and optical properties that are independent of a ± 30° variation in the solar angle of incidence. As a result, these simple optical coatings are rapidly designed using a genetic algorithm and transfer matrix formalism.

14 SOLAR ENERGY↗