Search NASA⌕ Search

SEARCH · Search NASA

Results for “combustion and reactive flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Plasma assisted NH 3 /H 2 /air ignition in nanosecond discharges with non-equilibrium energy transfer

Ammonia (NH 3 ), with its high energy density and easiness to store and transport as a hydrogen carrier, has become a promising alternative green fuel. However, its adoption in power generation is hindered by challenges such as low burning velocity, slow low-temperature oxidation, high NO x emissions, and ignition difficulty. Here, this work computationally investigates the effects of non-equilibrium energy transfer by nanosecond discharges on NH 3 ignition and flame propagation in an NH 3 /H 2 /air flow at 700 K and 1 atm. The simulation results demonstrate that NH 3 /air mixtures require a large ignition energy due to their large critical ignition radius. It is shown that adding 30 % hydrogen significantly reduces the critical ignition radius and minimum ignition energy. Two-dimensional modeling further shows a non-monotonic dependence of ignition kernel volume on the applied voltage and reduced electric field. The optimum ignition enhancement occurs at 200 Td where the generation of electronically excited species and radicals including N 2 (B), O( 1 D) and OH becomes most efficient. Higher voltages divert electron energy toward ionization, which makes it less effective for NH 3 ignition. The study also identifies an optimal electrode gap size for a given pulse energy. Smaller gap sizes increase deposited energy density, raising temperature and radical concentrations. However, excessive reduction of the gap distance reduces flame propagation speed due to the flame stretch effect in rich mixtures with the effective Lewis number greater than unity. A nonlinear relationship between pulse repetition frequency and ignition kernel volume is observed in a nanosecond pulsed high frequency discharge (NPHFD). An optimal frequency range of 200 kHz to 2 MHz is found when two pulses are used. In addition, an optimal number of pulses exists for each pulse repetition frequency, with higher frequencies requiring more pulses to maximize the overlap region. These findings provide critical insights on developing controlled plasma discharge techniques for efficient NH 3 ignition in reactive flows within internal combustion engines and gas turbines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Closure models for the feedback of energetic particles on plasma turbulence

Energetic particles interact with the plasma surrounding them, resonating with certain types of plasma waves to stabilize them while destabilizing others, and changing the character of the background turbulence in ways that have not been fully quantified or understood. Interaction with the turbulent background plasma is key to the acceleration of many types of energetic particles including high-energy cosmic rays, solar energetic particles, and pick-up ions. The acceleration of particles is a process that would ideally be described by a kinetic model, a type of model that follows a probability distribution function (PDF) for all particles in 7-dimensional (x, y, z, v x , v y , v z , t) space. Because of the high dimensionality of a kinetic model, simulations that solve kinetic equations use the largest computational resources currently available, and are yet unable to simulate a realistic number of particles, reach the large scales necessary for astrophysical problems, and use high-precision numerical methods. Two available alternatives to kinetic plasma models have been explored for this problem, with limited success. One is a multi-fluid model produced by a cumulant discarding closure, which evolves coupled equations for the velocity, magnetic field, and internal energy for both the background plasma and the fluid of energetic particles. However, simulations that solve multi-fluid magnetohydrodynamic (MHD) equations are able to include the interaction with energetic particles only in crude ways, typically as an add-on pressure term. The second alternative is to use a hybrid method to couple a fluid description of the background plasma to a kinetic model or a Fokker–Planck model for the energetic particles. These methods are hampered by the physical modeling of the coupling. In this work, we develop a new model, which follows the PDF for all particles; this can be viewed as a step toward physical realism above a multi-fluid MHD model, while also being more computationally efficient than a kinetic model. The equations we develop model both the background plasma and the energetic particles self-consistently. Over the last decade, similar PDF methods have been developed to a high level of sophistication to model reactive flows and turbulent combustion for engineering applications. For treatment of the feedback of the energetic particles on a background plasma, a PDF closure approach should evaluate the mean characteristics, including the density, with better statistical quality than will particle-sampling procedures.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Use of Convolutional Neural Network Image Classification and High-Speed Ion Probe Data Toward Real-Time Detonation Characterization in a Water-Cooled Rotating Detonation Engine

As rotating detonation engines (RDEs) progress in maturity, the importance of monitoring advancements toward development of active control becomes more critical. Experimental RDE data processing at time scales which satisfy real-time diagnostics will likely require the use of machine learning. This study aims to develop and deploy a novel real-time monitoring technique capable of determining detonation wave number, direction, frequency, and individual wave speeds throughout experimental RDE operational windows. To do so, the diagnostic integrates image classification by a convolutional neural network (CNN) and ionization current signal analysis. Wave mode identification through single-image CNN classification bypasses the need to evaluate sequential images and offers instantaneous identification of the wave mode present in the RDE annulus. Here, real-time processing speeds are achieved due to low data volumes required by the methodology, namely one short-exposure image and a short window of sensor data to generate each diagnostic output. The diagnostic acquires live data using a modified experimental setup alongside Pylon and PyDAQmx libraries within a python data acquisition environment. Lab-deployed diagnostic results are presented across varying wave modes, operating conditions, and data quality, currently executed at 3–4 Hz with a variety of iteration speed optimization options to be considered as future work. These speeds exceed that of conventional techniques and offer a proven structure for real-time RDE monitoring. The demonstrated ability to analyze detonation wave presence and behavior during RDE operation will certainly play a vital role in the development of RDE active control, necessary for RDE technology maturation toward industrial integration.

42 ENGINEERING↗
DOE OSTI2022

Simulations of Low Mach Number Reactive Flows Coupled with Electric Fields

Applying electric fields to flames can provide an effective, non-invasive control of the combustion process. In this work, an algorithm recently introduced to handle the interactions between reactive flows and an electric field is extended to handle multiple dimensions and adaptive mesh refinement (AMR), and applied to a series of laminar flames. Experimental data allows to validate the ability of the algorithm to capture the mechanisms driving the flame response to electric fields.

electric fields↗
DOE OSTI2022

Simulations of Low Mach Number Reactive Flows Coupled with Electric Fields: Preprint

Applying electric fields to flames can provide an effective, non-invasive control of the combustion process. In this work, an algorithm recently introduced to handle the interactions between reactive flows and an electric field is extended to handle multiple dimensions and adaptive mesh refinement (AMR), and applied to a series of laminar flames. Experimental data allows to validate the ability of the algorithm to capture the mechanisms driving the flame response to electric fields.

electric field↗
DOE OSTI2020

Inertial dynamics of an interface with interfacial mass flux: Stability and flow fields’ structure, inertial stabilization mechanism, degeneracy of Landau’s solution, effect of energy fluctuations, and chemistry-induced instabilities

This work focuses on the long-standing problem of inertial dynamics of an interface with interfacial mass flux and reports new mechanisms for the interface stabilization and destabilization. The interface is a phase boundary separating fluids of different densities and having interfacial mass flux. To analyze the interface dynamics from a far field, we develop and apply the general matrix method to rigorously solve the boundary value problem involving the governing equations in the fluid bulk and the boundary conditions at the interface and at the outside boundaries of the domain. We find the fundamental solutions for the linearized system of equations and analyze the interplay of interface stability with flow fields’ structure by directly linking rigorous mathematical attributes to physical observables. We find that the interface is stable when the dynamics conserves the fluxes of mass, momentum, and energy; the stabilization is due to an inertial mechanism causing small oscillations of the interface velocity. In the classic Landau’s dynamics, the postulate of perfect constancy of the interface velocity leads to the development of Landau–Darrieus instability. This destabilization is also linked to the imbalance of the perturbed energy at the interface. The classic Landau’s solution is found to have degeneracy; lifting of the degeneracy may lead to singularity and self-similar dynamics. Our results compare well with traditional theories of combustion and propose new experiments to study the dynamics of the interface and the flow fields in combustible systems. We further conduct reactive molecular dynamics simulations to elucidate the complexity of chemical processes, to study the destabilizing effect of energy fluctuations on the interface stability, and to illustrate the chemistry-induced instabilities. In summary, we identify the extreme sensitivity of the interface dynamics to the interfacial boundary conditions, including the formal properties of fundamental solutions and the qualitative and quantitative properties of the flow fields. This provides new opportunities for studies, diagnostics, and control of multiphase flows in a broad range of processes in nature and technology.

42 ENGINEERING↗
DOE OSTI2023

Evaluation of Spray and Combustion Models for Simulating Dilute Combustion in a Direct-Injection Spark-Ignition Engine

Dilute combustion in spark-ignition engines has the potential to improve thermal efficiency by mitigating knock and by reducing throttling and wall heat losses. However, ignition and combustion processes can become unstable for dilute operation due to a lowered laminar flame speed, resulting in excessive cycle-to-cycle variability (CCV) of the combustion process. To compensate for the slower combustion in less reactive mixtures, a modified intake port geometry can be employed to generate a strong tumble flow in the cylinder and elevate turbulence levels around the spark plug, thereby promoting a faster transition to turbulent deflagration. Consequently, optimizing combustion chamber geometry and operating strategy is crucial to maximizing the benefits of using dilute combustion with enhanced in-cylinder turbulence across a wide range of operating conditions. Computational fluid dynamics (CFD) simulations can be utilized for virtual engine optimization tasks, but this would require the models to be truly predictive regarding the impact of changes to the engine design and operational parameters.In this study, multicycle large-eddy simulations (LES) are performed for a direct-injection spark-ignition engine to investigate the model performance in predicting engine combustion characteristics with respect to changes in the intake configuration. A tumble plate that blocks the lower part of the intake port inlet is used to vary the tumble. A set of CFD models that have been recently developed are employed, which takes into account the drag of nonspherical droplets, flash-boiling behavior of liquid sprays, spray-wall interaction, surrogate formulation of a research-grade E10 gasoline, and fast chemical kinetic solvers. Simulation results are compared to experimental engine data in terms of cylinder pressure, apparent heat release rate, mass fraction burned timing, and flame images. It is found that LES employing the state-of-the-art CFD models are capable of properly predicting the spray processes and reproducing the measured mean cylinder pressure for the case with the tumble plate. On the other hand, the LES over-predicts the combustion rate during the early combustion stage and under-estimates the CCV, and these discrepancies become larger when the tumble plate is removed.

computational fluid dynamics simulation↗
DOE OSTI2021

Pulse Detonation Engine for Advanced Oxy-Combustion of Coal-Based Fuel for Direct Power Extraction Applications

Pressure gain combustion and magnetohydrodynamic (MHD) systems have the potential to provide a step increase in the efficiency of combined-cycle power plants. Specific advantages include a net pressure increase to the system instead of a pressure drop, the high temperature of the detonation waves can increase the efficiency of power extraction compared to other processes, significant thermal energy can be released in a compact region, and the high velocities of the flow increase extraction of electrical power. In summary, a pressure gain combustor coupled with a MHD has the potential to be transformative. Despite the potential advantages, relatively little research has been conducted considering coupled pressure gain combustion systems with MHD systems. With this background and motivation, the overall goal of this effort was to advance the knowledge, technology, and computational tools associated with coupled detonation and MHD systems. A joint experimental and computational approach was used while seeking to accomplish the goals of this work. Specifically, two pulse detonation engines were developed and used for the experiments to produce detonations. Detonation speeds were measured for a variety of flow and fuel conditions (e.g., methane, propane, with coal particles). Preliminary electrical conductivity measurements were collected. An extensive amount of research was performed to identify sensitivities of detonation behaviors to the presence of combustion products. Computationally, a twofold approach was used in this work. First, a solver was developed for solving the governing equations for a reactive flow with coupled detonation and ionization chemistry. The solver was applied to study the impacts of seed material ionization on detonation. Second, a conservation element-solution element (CE-SE) based numerical solver for detonation studies with a reduced reaction mechanism for oxy-methane combustion was developed and verified on standard test cases. Key findings and contributions from this work are as follows. A system was developed for injecting powderized coal, or other seeding material, into a pulse-detonation system. The influence of a combustion product (i.e., CO 2 ) on detonation behavior was identified. Knowledge gained from this work is applicable to devices such as rotating detonation engines, where combustion products mix with fresh reactants. A system for measuring the electrical conductivity of the exhaust from a pulse-detonation engine was developed. The open-source solver, Clawpack, was extended to solve the reactive Euler equations for simulating detonations. A coupled combustion and ionization chemistry was developed in a single chemical kinetic model for methane oxidation. This model can be used to solve coupled MHD and detonation simulations. It was found that parasitic interactions from ionization chemistry with the magnetic field can reduce the detonation velocity by up to 8%, with a potential impact on power extraction of 15%. It is recommended that interactions between the detonation front and MHD field be considered. Higher gas temperatures and velocities were achieved owing to oxy-fuel detonations. Use of radical dissociation reactions in the reduced reaction mechanism, was found to be critical in predicting detonation temperature and velocity accurately.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Pele: An Exascale-Ready Suite of Combustion Codes

High fidelity simulations of realistic combustion devices are extremely demanding computationally because of the requirements to capture complex fuel chemical decomposition, its intricate interactions with turbulent, often multiphase, flows, and the wide separation of space and time scales between the thin flame and the device boundaries. Software required to carry out such computations tends to be extremely complex, particularly when designed to exploit hardware accelerators, and can be difficult to port and maintain. We present Pele, a performance portable suite of tools for the simulation of combustion systems, including codes to evolve reactive multiphase configurations in the low Mach number and compressible flow regimes, along with a set of inter-compatible post processing and in situ analysis tools. The Pele suite of tools is built on top of the AMReX framework for block-structured adaptive mesh refinement, which provides efficient data structures and algorithms that enable the development of a wide variety of efficient mesh and particle based PDE integration schemes. A hierarchical MPI+X parallelism scheme supports CPU-only and accelerated architectures, where X can be OpenMP, CUDA, and HIP based approaches for intra-node computational work distribution. The algorithms and data structures underlying the Pele simulation and analysis tools are highly scalable and performant across a wide variety of high-performance computing platforms, including DOEs newest exascale-class machines, Frontier and Aurora. The simulation and analysis tools are fully documented and freely distributed as open source via GitHub. We present key algorithmic and software challenges, solution strategies, performance and resulting set of capabilities.

AMReX↗
DOE OSTI2022

Modeling of the effects of non-equilibrium excitation and electrode geometry on H 2 /air ignition in a nanosecond plasma discharge

In this work, we present the results of two-dimensional modeling of the effects of non-equilibrium excitation and electrode geometry on H 2 /air ignition in a nanosecond plasma discharge. A multiscale adaptive reduced chemistry solver for plasma assisted combustion (MARCS-PAC) based on PASSKEy discharge modeling package and compressible multi-component reactive flow solver ASURF+ is developed and validated. This model is applied to simulate the impact of non-equilibrium plasma excitation and electrode geometry and heat loss on the dynamics of the discharge from streamer to spark and ignition kernel development in a H 2 /air mixture with a pair of cylindrical electrodes. The results show that the plasmagenerated species (N 2 (A), N 2 (B), N 2 (a'), N 2 (C), O( 1 D), O and H) in the spark and afterglow significantly accelerate the ignition kernel development. The increase of discharge voltage at the same total discharge energy promotes the non-equilibrium active species production. It is found that the production of electronically excited species at higher reduced electric field strength is more efficient in enhancing ignition in comparison to the vibrational excitation and heating. Moreover, the 2D simulation clearly reveals that the electric field and active species distribution are highly non-uniform. The streamers are initiated at the sharp outer edges of the negative and positive electrodes by a strong electric field while the electric field is much weaker at the centerline of the electrodes. Furthermore, the simulations reveal that the ignition enhancement is sensitive to the variation of electrode shape, diameter, and gap size due to the changes of electric field distribution and location of streamer formation. A cylindrical electrode produces a larger discharge volume and ignition kernel than the parabolic and spherical electrodes, when the discharge is localized near the axis of the gap. It is found that there is a non-monotonic dependence of ignition kernel size on the electrode diameter and inter-electrode distance. The increase of electrode diameter and gap size above the optimal conditions leads to the reduction of ignition kernel volume, due to the decrease of active species concentration and gas temperature. At a larger electrode surface area and electrode diameter as well as smaller electrode gap size, the heat loss to electrode plays a greater role in reducing the ignition kernel size and slowing ignition kernel development. This work provides insights and guidance to understand the kinetic enhancement of non-equilibrium plasma and the effects of electrode geometries on ignition for the optimization ignitors in advanced engines.

42 ENGINEERING↗
DOE OSTI2025

A High-Order Discontinuous Galerkin Spectral Element Method for Compressible Reacting Flows

High-order methods have recently been shown to be an effective tool for high-fidelity flow computations like direct numerical simulations and large eddy simulations due to their strong balance between accuracy and computational cost. In this work, a high-order discontinuous Galerkin spectral element method (DGSEM) is developed to solve the chemically reactive Euler equations encountered in high-speed combustion. To handle the disparate length and time scales associated with these equations, we develop a novel method which combines the spectral accuracy of the SEM with the flexibility of DG approach. Thus, the framework is well suited to capture turbulence in smooth regions of the flow, while maintaining numerical stability in the presence of shocks. The numerical method is implemented within the spectral element solver Nek5000. Validation cases are conducted for both non-reactive and reactive discontinuous flows to demonstrate the solver capability. In particular, canonical one-dimensional and two-dimensional detonation simulations are performed and the high-order numerical results are validated against available literature data.

computational fluid dynamics (CFD)↗
DOE OSTI2022

Transforming Energy Through Computational Excellence: Bringing Low Mach Number Reactive Flow Simulations at the Exascale

PeleLMeX's unique capabilities are allowing for reactive flow modeling at unprecedented scales and a reasonable time and cost. The code is currently being extended to tackle more practical, design-oriented simulations by implementing Large Eddy Simulation and data-driven chemical models, providing a fast but accurate tool for engineers considering the emergence of GPU-accelerated platforms. These extensions are critical for enabling the physical insight required to design the next generation of combustion devices as a key component of a renewable energy future.

MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Combustion Research I.1 Sprays, Flow, Heat Transfer and Turbulent Mixing

LANL is working with the Partnership for Advance Combustion Engines (PACE) a DOE sponsored consortium of national laboratories for the research and development for creating smarter engine design tools for sustainable transportation. Much of that effort is focused on heat, mass and momentum transfer within and engine. LANL’s focus in 2019, in particular under PACE has been spray modeling and engine mixture formulation, development of conjugate heat transfer analysis (heat transfer to the environment surrounding the combustion chamber). Our efforts relay on the Fast, Easy, Accurate and Robust Continuum Engineering (FEARCE) software developed at LANL as the next generation of engine modeling software for turbulent reactive and multiphase flow, a 2019 R&D 100 winner. This work is relevant to the DOE Vehicle Technologies Office efforts at addressing national energy security as well. Less dependence on petroleum products leads to greater energy security. By Environmental Protection Agency standards, some vehicles are now reaching 42–50 mpg mark. These are conventional gasoline engines. With continued investment and research into new technical innovations, the potential exists to save more than 4 million barrels of oil per day or approximately $200 to $400 million per day. This would be a significant decrease in emissions and use of petroleum and a very large stimulus to the U.S. economy. Better understanding of fuel injection and fuel–air mixing, thermodynamic combustion losses, and combustion/emission formation processes enhances our ability to minimize fuel use and unwanted emissions. Helping to accomplish this understanding, the FEARCE modeling program is working to provide state-of-theart capability for accurately simulating combustion processes: to have a predictive methodology in a software helping industry and researchers not only meet national goals on fuel usage and emissions, but global goals. In addition, a predictive, robust, and accurate capability for simulating the engine combustion process helps to minimize time and labor for development of new engine technology.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Chemical Kinetics Underlying the Sooting Tendency and Auto-Ignition Characteristics of Linear, Branched, and Cyclic Ether Compounds

Biofuels present opportunities for improving the performance and reducing emissions from internal combustion engines by incorporating oxygenated functional groups to the fuels. Among various oxygenates, ethers have been recognized as promising candidates for an alternative to conventional diesel fuel owing to their higher reactivity and lower sooting tendency. The detailed guidelines for designing ethers, however, have not been fully discussed, even though their combustion characteristics are sensitive to the molecular structure. This study was devoted to exploring the structure-property relationships, particularly focusing on the cetane number and yield sooting index, using five linear, branched, and cyclic ethers: di-amyl-ether, 4-butoxy-heptane, 3,3-dimethyl-oxetane, 2-ethyl-4-methyl-1,3-dioxolane, and 2-isopropyl-4-methyl-1,3-dioxolane. First, we examined the chemical kinetics underlying the sooting tendency of the test fuels. The combustion product distribution was measured from flow reactor experiments at 750-1100 K, F=3, at atmospheric pressure. As a result, it was revealed that the sooting tendency is closely related to the size of hydrocarbon intermediates in the high-temperature regime (>1000 K); that is, larger hydrocarbons lead to more soot precursor formation. The underlying chemistry determining the size of the hydrocarbons from the tested fuels was analyzed using reaction pathway analysis and quantum mechanics calculations, which showed that the branched and cyclic ether structures form abundant C3-C4 compounds. Moreover, the auto-ignition characteristics of the test fuels were studied using the flow reactor at low-temperature (400-700 K) and F=1. We found a clear difference in the combustion-product distribution from high and low reactivity fuels, which was then correlated to the systematic analysis of the key reaction energy barriers with the varying molecular structure.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2023

Effect of the ..beta..-Hydroxy Group on Ester Reactivity: Combustion Kinetics of Methyl Hexanoate and Methyl 3-Hydroxyhexanoate

One of the major biofuels used today is biodiesel, composed of fatty acid methyl esters. The fats and oils feedstocks used to make biodiesel are in relatively short supply. To meet increasing global demand, engineered microorganisms have been developed to catalyze conversion of sugar to fatty acid esters that contain unique ..beta..-hydroxy-esters. This study investigated the effect of a hydroxyl group on the combustion characteristics of methyl esters by comparing the chemical behavior of methyl hexanoate (MHx) and methyl 3-hydroxyhexanoate (M3OHHx) - used as surrogates for diesel-boiling-range esters with longer fatty acid chains. The oxidation of these esters was studied experimentally in a flow reactor at 0.84 and 10 bar, 600 to 1,100 K, and stoichiometric conditions; and in a constant volume combustion chamber at 5 and 10 bar, 600 to 900 K, and equivalence ratios of 0.3 and 0.6. MHx was more reactive in the constant volume chamber at temperatures below 800 K at 10 bar and equivalence ratio of 0.6. MHx also exhibited a higher indicated cetane number (16.4) than M3OHHx (8.1). We investigated this reactivity trend using an updated MHx kinetic model and M3OHHx model developed as part of this work. The kinetic models predicted that radicals formed from MHx were consumed by low-temperature chemistry reactions, whereas the M3OHHx reactivity was significantly governed by the ..beta..-radical (on the same carbon as the OH group) chemistry which mainly terminated via the less reactive chain propagation pathway to methyl-3-oxohexanoate + HO2. This study extends our understanding of structural effects on ester reactivity, which will allow for accurate surrogate formulation and performance simulations.

AFIDA↗
DOE OSTI2020

Transported PDF Modeling of Compressible Turbulent Reactive Flows by using the Eulerian Monte Carlo Fields Method

Although the transported probability density function (PDF) method has been developed for decades, its application has been mainly focused on the low-Mach number flow problems. This work extends the transported PDF method to compressible flow problems. The Eulerian Monte Carlo fields (EMCF) solution method is employed to solve the transported PDF equation for compressible flow problems. A pseudo stagnation enthalpy is introduced and its stochastic partial differential equation is derived to ensure total energy conservation numerically. A new mixing model called interaction by partial exchange with mean (IPEM) is introduced to expand the available choices of mixing models for the EMCF method. The consistency of the EMCF method is examined for solving the transported PDF equation. Numerical implementation details are discussed, such as the density coupling between the compressible flow solver and the EMCF solver, discretization schemes for the mixing terms and the stochastic terms. The implemented compressible flow solver coupled with the EMCF solver is verified and validated in a series of test cases with increasing level of complexity, ranging from a statistically one-dimensional turbulent mixing layer to a self-excited resonance model rocket combustor. It is observed that in general with the increase of compressibility, there is an increase in the sensitivity of the modeling results to the different models and algorithms. This makes it necessary to develop a thorough understanding of the model sensitivity in order to develop a robust and accurate simulation solver for highly compressible turbulent reactive flows. The thermo-acoustic instability inside the model rocket combustor case is captured reasonably, which demonstrates the overall capability of the developed compressible turbulent combustion solver based on the transported PDF method.

42 ENGINEERING↗
DOE OSTI2023

Effects of non-thermal termolecular reactions on wedge-induced oblique detonation waves

The shock-induced combustion ramjet (Shcramjet) based on oblique detonation waves (ODWs) is among the promising choices for hypersonic propulsion systems. An understanding of the ignition, propagation, and stability of ODWs is critical to harnessing their propulsive potential. In such high speed reacting flows, there is a high probability of occurrence of non-thermal reactions due to the presence of non-trivial amounts of highly reactive radicals including H, O and OH apart from O 2 as demonstrated recently [M. P. Burke, S. J. Klippenstein, Nat. Chem. 9 (2017) 1078–1082, Y. Tao, A. W. Jasper, Y. Georgievskii, S. J. Klippenstein, R. Sivaramakrishnan, Proc. Combust. Inst. 38 (2021) 515–522]. The present work focuses on examining the initiation, propagation and structure of oblique detonation waves in stoichiometric H 2 -air mixtures through numerical simulations with and without non-thermal reactivity on a two-dimensional adaptive grid. Non-thermal reactions were included in the macroscopic kinetic model as chemically termolecular reactions facilitated by the H + OH radical-radical recombination and the H + O 2 radical-molecule association reactions. Since, the non-thermal reactions result in a corresponding decrease in the reaction fluxes of the incipient recombination/association reactions, an additional simulation was performed by applying corrections to the respective incipient recombination/association rate constants using the methodology demonstrated by Tao et al. [Y. Tao, A. W. Jasper, Y. Georgievskii, S. J. Klippenstein, R. Sivaramakrishnan, Proc. Combust. Inst. 38 (2021) 515–522]. Results show that, under ODWE relevant conditions, non-thermal reactivity fundamentally alters the induction length, intensity as well as the structure of the ODW. Specifically, it is found that non-thermal reactivity leads to a noticeable reduction in initiation length and a simultaneous increase in instantaneous peak heat release rate and the degree of unsteadiness of the ODW. Finally, statistical analysis of key thermo-chemical variables is performed to elucidate the important species as well as reactions responsible for the observed variations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Non-equilibrium low-temperature plasma-assisted combustion of iso-octane: Perturbing pyrolysis and oxidation kinetics

Here, in this study, a plasma-coupled flow reactor facility is used to examine the effects of non-equilibrium low-temperature plasmas on perturbing the pyrolysis and oxidation kinetics of iso-octane. Experiments were performed in highly dilute reactive mixtures of nitrogen, at near isothermal conditions for temperatures ranging from 523 K to 1203 K. Experiments cumulatively demonstrated enhanced chemical reactivity with the plasma for temperatures below 900 K, and a lowering of the hot-ignition temperature. Detailed kinetic insight was derived from a 0D plasma-coupled kinetic model, utilizing a constructed mechanism that combined both plasma-specific chemistry and the neutral combustion chemistry. For pyrolysis conditions, the model displayed relatively good agreement with fuel consumption and the formation of most intermediates compared to the experimental data, demonstrating the model is able to accurately predict primary radical formation from the plasma directly interacting with the fuel. Enhanced reactivity was attributed to collisional quenching of excited-states of N 2 with fuel, which led to efficient fuel fragmentation and enhancement of the H-radical flux. For oxidation conditions, the model displayed satisfactory agreement with the experiments. Model predictions were able to accurately predict fuel consumption and most intermediate speciation data for T > 800 K, but most discrepancies were towards T < 800 K in particular with oxygenated intermediates. In the presence of oxygen, plasma effects were predominantly spent on efficient enhancement of O- and H-radical fluxes, leading to further fuel fragmentation and initiation of both the OH- and HO 2 -radical pools. Subsequent reactivity of iso-octane was then dictated by the response of the temperature-dependent neutral chemistry. At low-temperatures (T = 643 K), enhanced fuel radicals and O 2 -additon chemistry lead to the formation of oxygenated species, while at intermediate temperatures (T = 843 K) net decrease in OH-radical reactivity led to an increase in hydrocarbon speciation. Near the self-ignition threshold (T = 1163 K), radicals generated by high-temperature branching reactions dominate the oxidation process and effectively ignition. This study ultimately demonstrated that the enhancement of radicals afforded by the plasma causes a deviation in known understanding of iso-octane kinetics in some regards and warrants future studies to reconcile these discrepancies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗