SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The interaction between a Au particle and a defective TiO 2 surface was simulated over 6000 unique conditions, and the relative importance of the parameters was determined by logistic regression.
As states within the United States respond to future grid development goals, there is a growing demand for reliable and resilient nighttime generation that can be addressed by low-cost, long-duration energy storage solutions. This report studies the potential of including concentrating solar power (CSP) in the technology mix to support California’s goals as defined in Senate Bill 100. A joint agency report study that determined potential pathways to achieve the renewable portfolio standard set by the bill did not include CSP, and our work provides information that could be used as a follow-up. This study uses a capacity expansion model configured to have nodal spatial fidelity in California and balancing-area fidelity in the Western Interconnection outside of California. The authors discovered that by applying current technology cost projections CSP fulfills nearly 15% of the annual load while representing just 6% of total installed capacity in 2045, replacing approximately 30 GWe of wind, solar PV, and standalone batteries compared to a scenario without CSP included. The deployment of CSP in the results is sensitive to the technology’s cost, which highlights the importance of meeting cost targets in 2030 and beyond to enable the technology’s potential contribution to California’s carbon reduction goals.
The chemodiversity of dissolved organic matter (DOM) in soil has been proposed to influence the microbial metabolism and fate of belowground organic carbon (C). However, integrating DOM chemistry into soil C cycle models to improve predictions of C stocks and fluxes—beyond simply considering DOM pool size—remains a challenge. While recent research suggests that incorporating DOM chemodiversity into models can improve predictions of microbial respiration, there is still a lack of mechanistic understanding describing how DOM chemodiversity affects microbial metabolism and soil respiration. Here, we evaluated whether DOM chemodiversity was a determinant of soil respiration using paired measurements of high-resolution DOM chemistry, obtained from Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS), and potential soil respiration rates from across the United States (U.S.), all data provided by the Molecular Observation Network. Our objectives were to (1) assess statistical relationships between DOM chemodiversity and microbial respiration, and (2) evaluate the ability of kinetic models to leverage DOM chemistry to explain empirical relationships found in statistical models. Statistical regressions revealed that DOM chemodiversity (alpha diversity) was nonlinearly related to potential soil respiration rates, both independently and through its interactions with DOM and total C concentrations. In soils with relatively high DOM but low total C concentrations, potential soil respiration rates were negatively correlated with DOM alpha diversity, whereas in soils with relatively low DOM and high total C concentrations showed the opposite trend. However, when metabolic transition theory kinetic models were modified to include chemodiversity, their performance was comparable to traditional Monod kinetics approaches, which simulate respiration rates as a function of DOM concentration. The inability to account for nonlinearities in DOM chemodiversity–respiration relationships highlight an opportunity to advance substrate uptake kinetics by establishing causal links between DOM chemodiversity, microbial metabolism trade-offs, and potential interactions under varied environmental conditions.
Partial oxidation of furanic biomass derivatives such as furfural is of interest for the sustainable production of chemicals including furoic acid, maleic acid, and 2,5-furandicarboxylic acid (FDCA). The oxidative bulk electrolysis of furfural is here investigated on platinum electrodes in acidic media. The effects of potential, concentration, pH, and supporting anion are studied, and selectivity trends are coupled with attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) to illuminate adsorbate structures that influence the catalysis. Increasing potential is found to shift selectivity from primarily C 5 products to C 4 products, coincident with oxidation of the Pt surface. Selectivity changes are also observed moving from pH 1 to pH 4, with an increase in C 5 products at higher pH. Furthermore, changing from the weakly adsorbing perchlorate anion to the specifically-adsorbing phosphate anion results in a number of changes that manifest differently depending on potential and pH. Selectivity to furoic acid is found to be highest above the pKa of phosphoric acid due to the strongly adsorbed phosphate ions suppressing flat-lying configurations of furfural that lead to C−C cleavage. These results point toward opportunities to use electrolyte engineering to tune selectivity and optimize surface conditions to disfavor binding of inhibitory products.
Digester-equipped municipal wastewater facilities generate recycle streams with high nutrient loads that increase energy consumption and can cause environmental pollution. The reduction of these loads through electrochemical nutrient recovery (ENR) could enhance the food–energy–water nexus by producing fertilizer (struvite). This study investigated the recovery process through a 1 year sampling of recycle streams and the implementation of nutrient recovery. Time series analyses showed that P (as orthophosphate) concentration was time-variant in digester effluent streams, while N (as ammonia) concentration was time-variant in only the aerobic system. Furthermore, these two nutrient concentrations did not correlate in any of the recycle streams. Subsequent multivariate screening analyses identified anode type, NH 4 + concentration, cathodic potential, P concentration, and temperature as most significant for ENR. Finally, the optimum conditions of cathodic potential, anode area-to-volume ratio, and temperature applied to a real recycle stream resulted in 95% P recovery with 0.03 kWh/kg P. This energy consumption is significantly lower than process energy for conventional P fertilizers (1.1 kWh/kg P) and chemical recovery processes at scale (1.7–12.9 kWh/kg P). Overall, this study recommended specific process controls for nutrient recovery, expanded the variables evaluated for ENR, and demonstrated the ability to significantly impact energy demand associated with P-based fertilizers.
INL conducted extensive studies to understand how the Xe capacity of AgZ-PAN changes under various conditions including flowrate, temperature, concentration, carrier gas, and irradiation of the sorbent. Therefore, it is well understood that AgZ-PAN can capture Xe under a wide range of conditions. While these studies were performed to prove that Xe can be completely desorbed from the column, the ability to concentrate Xe during desorption was not studied. Concentrating Xe during desorption would be ideal so as to produce Xe that can be used for commercial and research applications. This report investigates the Xe concentrating potential of AgZ-PAN by running multiple Xe adsorption-desorption cycles, collecting the desorbed effluent from a saturated AgZ-PAN column, and then loading it onto a fresh column.
Ion separations are critical for producing materials such as Li and rare-earth element salts that are essential for applications including energy storage and production. This research aimed to develop and understand separations of singly and multiply charged ions as well as separations among different singly charged ions such as Li + and Na + . Thin layers of polyelectrolytes on membranes allow passage of singly charged ions at rates 1000 times faster than those for multiply charged ions. This allows purification of mixtures with equal concentrations of Li + and Mg 2+ to create a permeate solution with >99% Li + . Such membranes may also effectively isolate rare earth elements. To separate Li + and K + , this work developed opposing flow and current in membranes. The current overcomes the flow of K + to allow Li + to selectively pass through the membrane, leading to Li + /K + selectivities around 70. All of the research employs modelling to better understand the mechanism of these separations, which includes transport driven by gradients in electrical potential, concentration, and pressure. The interplay of these driving forces can create highly selective separations.
In energy storage materials, strong electrochemical-mechanical coupling and highly anisotropic material properties contribute to the formation and propagation of micro-cracking during charge/discharge cycling, resulting in reduced performance and service life. In this work, a digital twin is created to investigate the performance of a Li-ion battery cathode and simulate degradation accumulation. Pixel-based model construction is used to represent the complex material geometries from microstructural images supplied by the National Renewable Energy Laboratory (NREL). Because of the expected large deformation and crack opening, the reproducing kernel particle method (RKPM), a meshfree method with discretization at the image pixels, is used to approximate the field variables: electrostatic potential, concentration, and displacement. An interface modified reproducing kernel (IM-RK) is constructed by scaling a smooth kernel function with an interface-distance function to achieve strategic discontinuity types (i.e. weak discontinuities for strain discontinuities and strong discontinuities for cracks) and alleviate Gibbs oscillations near these transition zones. The discrete nature of the images' pixel points is employed throughout the model and approximation construction. The mechanical model is verified using an image-based microstructure under tensile loading. A transient electro-chemo-mechanical coupled simulation is performed to evaluate the potential micro-cracking induced degradation of the battery cathode material subjected to charge/discharge cycling.
Phosphorus (P) is an essential macronutrient for agriculture, yet global reliance on finite phosphorite reserves raises concerns about long-term food and nutrient security. Struvite (MgNH 4 PO 4 ·6H 2 O), a mineral recovered from municipal wastewater, represents a sustainable and circular source of P, but uncertainty remains regarding its nutrient availability relative to conventional fertilizers. This study evaluated the fertilizer value and environmental safety of electrochemically recovered struvite (RecoP) in comparison with diammonium phosphate (DAP), triple superphosphate (TSP), and rock phosphate (RockP). Nutrient availability, potential contaminant concentrations, and soil P and nitrogen (N) dynamics were assessed using standardized chemical analyses and an 8-week incubation experiment across three soils with contrasting soil types. RecoP contained 14.7% citrate-soluble P, significantly greater than RockP and comparable to DAP and TSP. Across all soils, RecoP increased both readily available and moderately labile P pools (p < 0.01), matching the performance of conventional fast-release fertilizers. Despite containing approximately half the total of DAP, RecoP stimulated nitrification rates that were 2.2 times greater than the control and exceeded those of TSP, suggesting that fertilizer-derived N bioavailability, rather than total N loading, governed microbial N transformation responses. Concentrations of potentially toxic elements in RecoP were consistently well below US Environmental Protection Agency regulatory limits thresholds. Collectively, these results indicate that RecoP functions as a readily available source of both P and N, comparable to widely used conventional fertilizers, while meeting environmental safety standards. RecoP therefore represents a viable component of sustainable nutrient management strategies that support P recycling and agricultural productivity.
Fuel cell stacks coupled with electrolyzers and hydrogen storage sites can be a promising category of distributed energy resources for both grid-connected and stand-alone power systems. However, because of high costs, at-scale hardware testing of fuel cell stacks for grid-connected applications is not economically viable at present. A model-based system that can accurately captures the steady-state and dynamic response of fuel cell stacks over long time periods (hours), is needed. This paper demonstrate a real-time electromagnetic transient model of a megawatt-scale, grid-connected proton exchange membrane fuel cell stack, coupled with a mass-based hydrogen storage system. This model can emulate the electrical steady-state and dynamic response of grid-connected fuel cell stacks. We validate the model using the response of commercial hardware fuel cell stacks and analytical models in the literature - using a digital real-time simulator (RSCAD). The proposed real-time model is then used to simulate cases spanning different time horizons and to design controller-hardware-in-the-loop experiments to evaluate controllers for hydrogen stations.
In energy storage materials, strong electrochemical-mechanical coupling and highly anisotropic material properties contribute to the formation and propagation of micro-cracking during charge/discharge cycling, resulting in reduced performance and service life. In this work, a digital twin is created to investigate the performance of a heterogeneous Li-ion battery cathode and simulate degradation accumulation. Pixel-based model construction is used to represent the complex material geometries from microstructural images supplied by the National Renewable Energy Laboratory (NREL). Because of the expected large deformation and crack opening, the reproducing kernel particle method (RKPM), a meshfree method with discretization at the image pixels, is used to approximate the field variables: electrostatic potential, concentration, and displacement. An interface modified reproducing kernel (IM-RK) is constructed by scaling a smooth kernel function with an interface-distance function to achieve strategic discontinuity types (i.e. weak discontinuities for strain discontinuities and strong discontinuities for cracks) and alleviate Gibbs oscillations near these transition zones. Applications to the heterogeneous microstructures of Li-ion battery cathodes will be presented to demonstrate the effectiveness of the proposed methods. IM-RK is additionally used to inform how crack evolution in turn affects the coupled electro-chemo-mechanical behavior of the Li-ion battery cathode.
Currently, there are no publicly-available estimates of indoor radon concentration at scales smaller than the county. Radon-hazard potential soil maps that reflect underlying geologic factors can be created at small geographic scale and linked to residential and census data. We determined the association between residential radon tests and high radon-hazard potential soil at the residential and block group levels using a large Utah-based dataset. We also identified characteristics of block groups with limited tests in the dataset.
The chemical potential (μ) of species in solution is essential for understanding various chemical processes at interfaces. Molecular dynamics (MD) simulations, constrained by fixed compositions, cannot maintain constant chemical potential with reference to a targeted concentration or chemical potential under nonequilibrium or dynamic conditions, as solute species can migrate to the interface and deplete (or enrich) the bulk due to solute-interface interactions. In this study, we introduce a simple and computationally efficient approach named iterative quasi-constant chemical potential molecular dynamics (iqCμMD) simulation, which helps simulate targeted molar concentrations of species in solution. iqCμMD overcomes the limitations of conventional MD by adjusting the number of species in the solution to reach a target bulk concentration (chemical potential), which allows simulation of the interface under the bulk conditions comparable to experiment. We demonstrate our approach using machine learning interatomic potential (MLIP)-based MD simulations of the Na 2 SO 4,aq –graphene interface, and to show the transferability of our approach, we also perform classical force field-based MD simulations of NaCl aq –air and NaCl aq –graphite interfaces, which produce comparable results to previous CμMD simulations. Our results also show that the iqCμMD approach efficiently achieves the desired bulk ion concentration within two iterations, and by utilizing MLIPs, we can achieve converged results using relatively small-scale simulations compared to previous CμMD simulations. By combining iqCμMD with MLIP-driven simulations, solid–liquid interfaces can be modeled under an effective constant chemical potential with DFT-level accuracy. Here, we show that iqCμMD offers a robust and simple computational framework for constant chemical potential simulations, as its only requirement is to be able to converge interfacial simulations with a measurable bulk region.
Reverse osmosis concentrate (ROC) treatment is critical for enhancing water recovery and minimizing concentrate volume for disposal, especially in regions facing water scarcity. This study investigates the application of ion exchange (IX) resins and activated alumina (AA) as pretreatment strategies to mitigate scaling in ROC due to high concentrations of total dissolved solids, hardness (Ca 2+ and Mg 2+ ), and silica. Through a series of Langmuir isotherms, continuous column experiments, and model simulation, two types of strong acid cation IX resins and three types of strong base anion IX resins alongside three types of AA were evaluated. Results indicate that AA exhibits superior performance in silica removal, achieving up to a 65% reduction and maintaining performance for up to 800 bed volume without reaching saturation. Model simulation of a secondary reverse osmosis treating ROC after the IX and AA pretreatment indicated an additional water recovery of ~70% using antiscalants. This study demonstrates the potential for achieving higher water recovery while also identifying opportunities for pretreatment improvement. Challenges such as the limited IX capacity treating ROC, which requires frequent regeneration and increases operational costs, along with the restricted regeneration capacity of AA, underscore the importance of innovation. These findings emphasize the critical need for developing advanced materials and optimized strategies to further enhance the efficiency of ROC treatment processes.
Here, for proton-exchange-membrane fuel cells (PEMFCs) to achieve broad commercialization, improved energy-conversion efficiency with minimal Pt-based electrocatalyst is required. Because the sluggish rate of oxygen reduction reaction (ORR) limits the efficiency of PEMFCs, the efficiency improvement requires a better understanding of ORR kinetics and mechanism to design better catalyst. To understand the ORR mechanism, theoretical and experimental analyses have been conducted. While previous studies reasonably explained the catalyst-dependent activity on single crystal catalysts in 0.1 M perchloric acid solution, the explicit effect of electrolyte and related microenvironments is not thoroughly understood. The change in the electrolyte alters the electric-double-layer (EDL) structure and thus the local microenvironment at the electrode/electrolyte interface. Thus, the structure of the EDL should be carefully analyzed to uncover the electrolyte-dependent reaction kinetics. In this talk, we propose a multiscale continuum model to predict the EDL structure and examine the effect of perchloric acid concentration on ORR activity on Pt (111). The model includes Density Potential Functional Theory (DPFT) for electron density and Modified Poisson Boltzmann equation for species’ density and electric potential. Also, the interaction between adsorbents and electric field is taken into account by minimizing the grand potential. After model validation with experimentally measured double-layer capacity data as a function of applied potential and concentration, the effect of the perchloric acid concentration (0.02 M – 0.2 M) on ORR activity is analyzed and discussed. It is shown that the model reproduces the specific activity obtained in the experiments when assuming the oxygen adsorption is limiting the rate, which can be attributed to the large energetic barrier for solvent reorganization. Then, extension of the model to PEMFC ionomer electrolytes will be introduced. Overall, the model framework and findings provide insights into the ORR mechanism and guidance on how to tailor catalyst materials for increased PEMFC performance.
The basis of regulations governing the packaging and shipping of radioactive material is to keep radioactive material from affecting the environment during transportation and to keep the environment from affecting the integrity of the radioactive material. The package itself is to be designed and constructed to be the effective barrier between the environment and the radioactive material; thus, most of the regulatory restrictions apply to the package and the method of shipment used to transport the package. To reduce any potential hazard, the regulatory requirements become more restrictive as the quantity, concentration, and potential hazard of the radioactive material increase.
The passage of current through a battery results in the development of concentration gradients in the electrolytic phase. For a fully characterized binary electrolyte, where the conductivity, salt diffusion coefficient, cation transference number, and the thermodynamic factor are known, concentration and potential gradients in the electrolytic phase can be modeled using Newman’s concentrated solution theory. We report two methods for measuring the transference number: the standard method based on electrochemical measurements ( t + , echem 0 ) and electrophoretic NMR ( t + , eNMR 0 ). The electrochemical approach requires combining measurements from multiple experiments; the equations used to determine the cation transference number and the thermodynamic factor are coupled, nonlinear algebraic equations. In the electrophoretic-NMR-based approach, however, the equations used to determine the cation transference number and the thermodynamic factor are decoupled. We find for a liquid electrolyte comprised of a lithium salt dissolved in tetraglyme, the values of the transference numbers obtained by these two methods are distinct. For example, at 30 °C, t + , echem 0 = −1.02 ± 1.11 and t + , eNMR 0 = 0.25 ± 0.04. The corresponding thermodynamic factors are also different. While the magnitude of the predicted concentration gradients based on the two sets of parameters are different, the predicted current-voltage relationships are similar.
Legacy contaminants tied to energy production are a worldwide concern. Coal combustion residues (CCRs) contain high concentrations of potentially toxic trace elements such as arsenic (As), mercury (Hg), and selenium (Se), which can persist for decades after initial contamination. Coal combustion residue disposal methods, including aquatic settling basins and landfills, can facilitate environmental exposure through intentional and accidental releases. Wildlife exposed to CCRs can experience numerous deleterious effects, such as on development, reproduction, and survival. In the current study, we quantified and compared concentrations of As, Hg, Se, and strontium (Sr) within soils and target fauna (three vertebrate and three invertebrate taxa) from a CCR-contaminated site and a reference site within the U.S. Department of Energy’s Savannah River Site, South Carolina, United States. Our objectives were to (1) compare current concentrations of tested elements in soil and resident fauna to levels from our reference site, (2) assess natural attenuation of elements in soils by comparing current concentrations to historic levels, and (3) evaluate the biomagnification potential of the elements measured via body burden and trophic position correlations among fauna. Here, element concentrations were higher in contaminated soils than reference soils; however, concentrations in 2022 were unchanged from concentrations measured in 2003, suggesting no natural attenuation of tested elements. Additionally, target fauna had elevated As, Se, and Sr levels in comparison to reference samples. A positive correlation was observed in southern toads between Sr concentrations and trophic position, as assessed by nitrogen stable isotope ratios, suggesting potential for biomagnification of Sr within our study system. Collectively, our results demonstrate that legacy contaminants are still present and bioaccumulate in a diversity of taxa in a CCR-contaminated site that has not received effluents in more than 50 years, suggesting monitoring programs in CCR-contaminated sites should be maintained long term in the absence of remediation.