Search NASA⌕ Search

SEARCH · Search NASA

Results for “conduit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Manufacture of porous biodegradable polymer conduits by an extrusion process for guided tissue regeneration

We have fabricated porous, biodegradable tubular conduits for guided tissue regeneration using a combined solvent casting and extrusion technique. The biodegradable polymers used in this study were poly(DL-lactic-co-glycolic acid) (PLGA) and poly(L-lactic acid) (PLLA). A polymer/salt composite was first prepared by a solvent casting process. After drying, the composite was extruded to form a tubular construct. The salt particles in the construct were then leached out leaving a conduit with an open-pore structure. PLGA was studied as a model polymer to analyze the effects of salt weight fraction, salt particle size, and processing temperature on porosity and pore size of the extruded conduits. The porosity and pore size were found to increase with increasing salt weight fraction. Increasing the salt particle size increased the pore diameter but did not affect the porosity. High extrusion temperatures decreased the pore diameter without altering the porosity. Greater decrease in molecular weight was observed for conduits manufactured at higher temperatures. The mechanical properties of both PLGA and PLLA conduits were tested after degradation in vitro for up to 8 weeks. The modulus and failure strength of PLLA conduits were approximately 10 times higher than those of PLGA conduits. Failure strain was similar for both conduits. After degradation for 8 weeks, the molecular weights of the PLGA and PLLA conduits decreased to 38% and 43% of the initial values, respectively. However, both conduits maintained their shape and did not collapse. The PLGA also remained amorphous throughout the time course, while the crystallinity of PLLA increased from 5.2% to 11.5%. The potential of seeding the conduits with cells for transplantation or with biodegradable polymer microparticles for drug delivery was also tested with dyed microspheres. These porous tubular structures hold great promise for the regeneration of tissues which require tubular scaffolds such as peripheral nerve, long bone, intestine, or blood vessel.

NASA Discipline Cell Biology↗
DOE OSTI2022

An Assessment of Hydropower Potential at National Conduits

In support of the mission of the US Department of Energy Water Power Technologies Office to promote domestic next-generation hydropower growth, this study provides a first-of-its-kind assessment of the hydropower development potential on existing water conduits nationwide. This study evaluates the potential for conduit hydropower development in the municipal, agricultural, and industrial sectors across the United States. The research team developed systematic methods to evaluate conduit hydropower capacity potential (MW) and energy generation potential (GWh/year) at four categories of conduits across the United States. They include the following: (1) Water supply pipelines for municipal and industrial uses, (2) Wastewater discharge conduits from municipal and industrial systems, (3) Agricultural water conduits including irrigation canals and ditches in the 17 western states that rely heavily on irrigation, and (4) Thermoelectric power plant cooling water discharge conduits. For each type of conduit, the team developed and implemented a method to estimate hydraulic head and annual water flows—and the hydropower potential—based on analyses of satellite imagery, topography, and existing data sets on water systems and power plants. These methods support a consistent, replicable estimate of conduit hydropower potential across 3 sectors and all 50 states, aggregated at the county and state levels. The assessment was conducted at the reconnaissance level, considering resources that could be available for development at the state and national levels using present-day assumptions about conduit hydropower technology.

13 HYDRO ENERGY↗
DOE OSTI2025

In-Conduit Hydropower for Public Water Supply Systems: Development Challenges and Costs

Conduit hydropower leverages existing water infrastructure to provide energy solutions, though deployment has been slow. A 2022 US Department of Energy (DOE)–funded report led by Oak Ridge National Laboratory (ORNL) summarizes a reconnaissance-level study of hydropower potential at national conduits (Kao et al., 2022). The report includes power and energy estimates across three major sectors of conduit hydropower potential: municipal, agricultural, and industrial. Water resources include public water supply systems (municipal and industrial), irrigation canal systems (agricultural), thermoelectric cooling systems (industrial), and wastewater systems (municipal and industrial). In total, 1.41 GW of power potential was estimated nationwide. Subsequently, DOE has funded ORNL through the Conduit Hydropower Engineering, Evaluation, and Technology Acceleration project (CHEETA) to improve deployment potential for conduit hydropower. Work thus far has focused on “in-conduit” hydropower (ICH)—or “in-pipe” hydropower—for public water supply systems, though the project is planning to cover conduit hydropower more broadly. The timeline of ORNL’s conduit hydropower related research and development (R&D) is shown in Figure 1. The results of CHEETA should benefit the hydropower industry by providing insights into costs, barriers, and other considerations that impact project development. The hydropower industry and municipal/industrial conduit stakeholders will use the output to inform development decisions and advance low-impact hydropower growth in the US.

13 HYDRO ENERGY↗
NASA NTRS2011

Conduit purging device and method

A device for purging gas comprises a conduit assembly defining an interior volume. The conduit assembly comprises a first conduit portion having an open first end and an open second end and a second conduit portion having an open first end and a closed second end. The open second end of the first conduit portion is disposed proximate to the open first end of the second conduit portion to define a weld region. The device further comprises a supply element supplying a gas to the interior volume at a substantially constant rate and a vent element venting the gas from the interior volume at a rate that maintains the gas in the interior volume within a pressure range suitable to hold a weld bead in the weld region in equilibrium during formation of a weld to join the first conduit portion and the second conduit portion.

Wilks, Michael T.↗
NASA NTRS1998

Further Development, Support, and Enhancement of CONDUIT

A great deal of progress was made in the past year, Most importantly, the CONDUIT software package was developed to the point where it could be released to several aircraft companies for use in the design of control systems. During the week of February 23 to February 27, 1998, we collaborated with personnel from Moffett Field and California Polytechnic Institute in teaching a short course to 18 representatives of industry and the U. S. Government on the use of CONDUIT. This was a major milestone in the development of CONDUIT. At present, CONDUIT is being used by a number of companies in the design of several aircraft control systems. Most of our effort during the past year was devoted to research on items for inclusion in the CONDUIT diagnostics menu, work on good illustrative examples of the operation of CONDUIT, and on assisting in publicizing CONDUIT to industry and the government. Substantial progress was made in all of-these areas. The original goals for this contract are presented in the following section of this report. The modifications to these goals and the reasons for them are also described. This is followed by a section containing the results of work on this contract. A final section contains suggestions for future work on this project.

Levine, William S.↗
NASA NTRS1997

CONDUIT: A New Multidisciplinary Integration Environment for Flight Control Development

A state-of-the-art computational facility for aircraft flight control design, evaluation, and integration called CONDUIT (Control Designer's Unified Interface) has been developed. This paper describes the CONDUIT tool and case study applications to complex rotary- and fixed-wing fly-by-wire flight control problems. Control system analysis and design optimization methods are presented, including definition of design specifications and system models within CONDUIT, and the multi-objective function optimization (CONSOL-OPTCAD) used to tune the selected design parameters. Design examples are based on flight test programs for which extensive data are available for validation. CONDUIT is used to analyze baseline control laws against pertinent military handling qualities and control system specifications. In both case studies, CONDUIT successfully exploits trade-offs between forward loop and feedback dynamics to significantly improve the expected handling, qualities and minimize the required actuator authority. The CONDUIT system provides a new environment for integrated control system analysis and design, and has potential for significantly reducing the time and cost of control system flight test optimization.

Tischler, Mark B.↗
DOE OSTI2022

Modeling Monthly Nitrate Concentration in a Karst Spring with and without Discrete Conduit Flow

Understanding the coupled continuum pipe-flow framework for modeling contaminant transport in karst systems is critical for protecting water resources therein. This study simulated point and non-point source nitrate concentration in a karst spring and investigated the results generated from the flow and transport model with and without discrete conduit flow. CFPv2 and CMT3D models were integrated to address the changes in nitrate concentration at a monthly scale in a karst spring, and the results were compared with that from an equivalent porous media (EPM) model with high-hydraulic conductivity (K) zones set in the main karstified area to represent conduits. The results show that the CFPv2+CMT3D model is able to describe well the recession of nitrate concentration in spring discharge, and the relatively larger deviation (slower nitrate recession) from the observed trend for the EPM model is probably a result of the limitation of utilizing high hydraulic conductivity cells to represent conduit. Moreover, simulated hydraulic heads in poorly karstified areas from the two models both show slight differences from the observations (the head RMSE values of calibration/validation for CFPv2 and MODFLOW models are 0.16 m/0.25 m and 0.26 m/0.17 m, respectively), indicating the inclusion of conduits may not affect the simulation considerably, and the lower the proportion of karstic area, the slight effects brought from the inclusion of conduits in the model. For highly karstified areas, the CFPv2+CMT3D model could provide more accurate results (head RMSE of calibration/validation for CFPv2 and MODFLOW are 0.22 m/0.06 and 0.52 m/0.47 m, respectively), showing the coupled continuum pipe-flow framework may be more appropriate for applying to highly and maturely karstified areas where the variations in the behavior of flow and contaminant transport are more affected by turbulent flow regime.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Industrial Conduit Hydropower Opportunities in the United States: Scoping Assessment

Industrial conduit hydropower involves generating electricity from flowing water in existing industrial water supply, process flow, or wastewater discharges. The broader range of conduit hydropower involves powering existing water infrastructure in municipal, industrial, or agricultural systems. Whereas municipal and agricultural water systems have been retrofitted somewhat broadly in the United States, there are very few examples of industrial conduit hydropower. As stated in Kao et al. (2022), “conduit hydropower opportunities associated with industrial conduits are the least understood […] industrial developments are likely to be particularly efficient and cost-effective since they are typically eligible for on-site net-metering.” Therefore, additional insight into industrial opportunities is needed.

13 HYDRO ENERGY↗
NASA NTRS1990

Terrestrial analogs to lunar sinuous rilles - Kauhako Crater and channel, Kalaupapa, Molokai, and other Hawaiian lava conduit systems

Two source vents, one explosive and one effusive erupted to form a cinder cone and low lava shield that together compose the Kalaupapa peninsula of Molokai, Hawaii, A 50-100-m-wide channel/tube system extends 2.3 km northward from kauhako crater in the center of the shield. Based on modeling, a volume of up to about 0.2 cu km of lava erupted at a rate of 260 cu m/sec to flow through the Kauhako conduit system in one of the last eruptive episodes on the peninsula. Channel downcutting by thermal erosion occurred at a rate of about 10 micron/sec to help form the 30-m-deep conduit. Two smaller, secondary tube systems formed east of the main lava channel/tube. Several other lava conduit systems on the islands of Oahu and Hawaii were also compared to the Kauhako and lunar sinuous rille systems. These other lava conduits include Whittington, Kupaianaha, and Mauna Ulu lava tubes. Morphologically, the Hawaiian tube systems studied are very similar to lunar sinuous rilles in that they have deep head craters, sinuous channels, and gentle slopes. Thermal erosion is postulated to be an important factor in the formation of these terrestrial channel systems and by analogy is inferred to be an important process involved in the formation of lunar sinuous rilles.

Coombs, C. R.↗
NASA NTRS1999

CONDUIT: Control Designer's Unified Interface

CONDUIT, which stands for control designer's unified interface, is a computer software package. Its purpose is to assist a human control system designer in designing control systems for aircraft. At the present time CONDUIT is being used by most of the major U. S. rotorcraft and fixed-wing aircraft manufacturers to assist in the design of stability and control augmentation systems. Work is also continuing on the development of additional features for CONDUIT, including tools for analyzing the sensitivity of solutions, and on further enhancements to the basic package. The purpose of this paper is to describe CONDUIT, its operation, and the sensitivity tools that are being developed for inclusion in the next release of the package.

Levine, William S.↗
DOE OSTI2021

Lightning Current Propagation in Electrical Conduit

Investigation of lightning strikes to conductors ran through long spans of rigid steel conduit was performed. An overdamped-exponential current waveform with controlled peaks and rise rates was used to inject simulated lightning strikes. The impact of the length of wire, length of conduit, grounding location/s, and load type was investigated. Breakdown of 600 V, 12 AWG, THHN insulated wire (3.23 mm OD, 2 mm conductor diameter) was observed for voltages above 45 kV. The presence of resistive loads (between wire and ground) in excess of 20 ohms, or current rise times in excess of 5 kA/μs were found to consistently produce breakdown between wire and conduit. Practical power circuit elements such as outlets and splices were found to breakdown at voltage levels much below the wire insulation failure threshold.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

US Hydropower Potential at National Conduits

The US Hydropower Potential at National Conduits dataset provides the results of a national assessment of various conduit hydropower potential for the year 2022. Hydropower potential and generation estimates are provided for various types of municipal, agricultural, and industrial applications across all 50 states. A total of 1.41 gigawatts of hydropower potential is estimated across the US. This dataset provides conduit hydropower estimates summarized at state resolution in Shapefile (*.shp) format and at county resolution in comma separated (*.csv) and *.shp format.

13 HYDRO ENERGY↗
NASA NTRS1986

Automated Conduit Unloading

Large, cumbersome pipes removed from trailer by one operator. Swiveltruck trailer carries conduit and unloads it. Vertical bins interconnected by web belts that elevate conduit sections for delivery by gravity to unloading point. Trailer loaded with slurry-pipe sections 6 inches (15.2 centimeters) in diameter, but bin width readily changed to hold other sizes. Simple adjustments in bin-partition and web-belt positions needed to adapt system to different conduit cross sections.

Lewis, E. V.↗
NASA NTRS1997

Multicriteria Gain Tuning for Rotorcraft Flight Controls (also entitled The Development of the Conduit Advanced Control System Design and Evaluation Interface with a Case Study Application Fly by Wire Helicopter Design)

Handling qualities analysis and control law design would seem to be naturally complimenting components of aircraft flight control system design, however these two closely coupled disciplines are often not well integrated in practice. Handling qualities engineers and control system engineers may work in separate groups within an aircraft company. Flight control system engineers and handling quality specialists may come from different backgrounds and schooling and are often not aware of the other group's research. Thus while the handling qualities specifications represent desired aircraft response characteristics, these are rarely incorporated directly in the control system design process. Instead modem control system design techniques are based on servo-loop robustness specifications, and simple representations of the desired control response. Comprehensive handling qualities analysis is often left until the end of the design cycle and performed as a check of the completed design for satisfactory performance. This can lead to costly redesign or less than satisfactory aircraft handling qualities when the flight testing phase is reached. The desire to integrate the fields of handling qualities and flight,control systems led to the development of the CONDUIT system. This tool facilitates control system designs that achieve desired handling quality requirements and servo-loop specifications in a single design process. With CONDUIT, the control system engineer is now able to directly design and control systems to meet the complete handling specifications. CONDUIT allows the designer to retain a preferred control law structure, but then tunes the system parameters to meet the handling quality requirements.

Biezad, Daniel↗
NASA NTRS1999

The Development of the CONDUIT Advanced Control System Design and Evaluation Interface with a Case Study Application to an Advanced Fly by Wire Helicopter Design

This report details the development and use of CONDUIT (Control Designer's Unified Interface). CONDUIT is a design tool created at Ames Research Center for the purpose of evaluating and optimizing aircraft control systems against handling qualities. Three detailed design problems addressing the RASCAL UH-60A Black Hawk are included in this report to show the application of CONDUIT to helicopter control system design.

Colbourne, Jason↗
NASA NTRS2013

Conduit Coating Abrasion Testing

During my summer internship at NASA I have been working alongside the team members of the RESTORE project. Engineers working on the RESTORE project are creating ·a device that can go into space and service satellites that no longer work due to gas shortage or other technical difficulties. In order to complete the task of refueling the satellite a hose needs to be used and covered with a material that can withstand effects of space. The conduit coating abrasion test will help the researchers figure out what type of thermal coating to use on the hose that will be refueling the satellites. The objective of the project is to determine whether or not the conduit coating will withstand the effects of space. For the RESTORE project I will help with various aspects of the testing that needed to be done in order to determine which type of conduit should be used for refueling the satellite. During my time on the project I will be assisting with wiring a relay board that connected to the test set up by soldering, configuring wires and testing for continuity. Prior to the testing I will work on creating the testing site and help write the procedure for the test. The testing will take place over a span of two weeks and lead to an informative conclusion. Working alongside various RESTORE team members I will assist with the project's documentation and records. All in all, throughout my internship at NASA I hope to learn a number of valuable skills and be a part of a hard working team of engineers.

Sullivan, Mary K.↗
NASA NTRS1982

Conduit for Transferring Molten Silicon

Proposed three-part conduit transfers pure silicon between crucibles. Four-strip heater augments layers of insulation to prevent molten silicon from cooling and solidifying during transfer. Since melt is maintained at temperature relatively close to fusion point, to minimize quartz erosion, even relatively-minor heat losses precipitate solidification and terminate work in progress. Several crucibles may be fed through conduits from central crucible. Each would be contained in its own compartment under inert atmosphere.

Fiegl, G.↗
NASA NTRS1983

Electrical Conduit Distributes Weld Gas Evenly

Purge-gas distributor, made from flexible electrical conduit by drilling small holes along its length, provides even gas flow for welding. Flexible conduit adjusts to accomodate almost any shape and is used for gas coverage in other applications that previously needed formed and drilled solid tubing.

Ambrisco, D. P.↗