Search NASA⌕ Search

SEARCH · Search NASA

Results for “constant flux”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Mineral Scale Formation during Crossflow Reverse Osmosis at Constant Flux and Constant Transmembrane Pressure Conditions

Mineral scale formation on membrane surfaces is a significant challenge in reverse osmosis water purification. Laboratory fouling experiments are typically run such that the transmembrane pressure (TMP) is fixed, and the permeate flux decreases over time as scales accumulate on the membrane surface. However, this change in flux means that the hydrodynamic conditions at the membrane surface are continuously changing, which could affect crystallization and foulant deposition processes. Operating under constant permeate flux conditions, in contrast, is advantageous because it keeps the hydrodynamic conditions relatively consistent, making it possible to compare how membrane properties (e.g., surface chemistry) affect fouling propensity. Industrial reverse osmosis operations are not run strictly in either constant TMP or constant flux mode; while they may start at a constant TMP, feed pressure may be periodically adjusted to maintain permeate water production within a specified range. Here, the scarcity of constant permeate flux reverse osmosis scaling experiments reported in the literature frustrates efforts to compare membrane fouling processes under constant TMP and constant flux conditions. For the first time, the evolution of the fouling layer resistance was compared as a function of cumulative permeate volume per membrane area during constant TMP and constant flux reverse osmosis filtrations. Scaling experiments were conducted by challenging commercial reverse osmosis membranes with a model feed solution nearly saturated with calcium sulfate dihydrate (gypsum). At low fluxes, the increase in fouling layer resistance was quantitatively similar for the two operational modes. In contrast, at high fluxes, the fouling layer resistance increased more rapidly in constant flux filtration than in constant TMP filtration. The mechanism of scale formation in constant TMP and constant flux operation was self-limiting and self-reinforcing, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Complete coverage fouling model for constant flux crossflow ultrafiltration and experimental validation

A complete coverage model is proposed to describe fouling in constant flux crossflow ultrafiltration. Constant flux crossflow fouling experiments were conducted using dilute latex bead suspensions and commercial poly(ether sulfone) flat sheet ultrafiltration membranes to investigate the influence of operating conditions on evolution of transmembrane pressure (ΔP, TMP) with time. Changes in permeate flux or crossflow rate had little influence on the normalized TMP profile at high latex bead concentration (i.e., above 25 ppm) because the membrane surface was covered with latex beads. At low concentration (i.e., below 25 ppm), increases in permeate flux or foulant concentration increased normalized ΔP. However, this increase in normalized ΔP with permeate flux or foulant concentration diminishes when the permeate flux/concentration is high enough to overwhelm particle removal due to crossflow. Furthermore, these results are in good agreement with the new complete coverage model which describes the influence of operating parameters on fouling better than the previous model.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Are the polarization data consistent with constant flux models of Titan's atmosphere?

Attention is given to the consequences of applying the assumption that the mass flux through Titan's atmosphere is independent of height to the Tomasko and Smith (1982) model for Voyager polarization measurements. It is noted that one of the assumptions of the constant flux model must be altered, in order to render it consistent with both the polarization data and the observed equivalent widths of the methane bands. Allowing for the possibility of two chemically different aerosols may explain not only why the ethylene polymers are not seen in the main haze, but also the composition of the detached haze layer.

Podolak, M.↗
NASA NTRS2005

Time and Space Resolved Heat Flux Measurements During Nucleate Boiling with Constant Heat Flux Boundary Conditions

The lack of temporally and spatially resolved measurements under nucleate bubbles has complicated efforts to fully explain pool-boiling phenomena. The objective of this current work was to acquire time and space resolved temperature distributions under nucleating bubbles on a constant heat flux surface using a microheater array with 100x 100 square microns resolution, then numerically determine the wall to liquid heat flux. This data was then correlated with high speed (greater than l000Hz) visual recordings of The bubble growth and departure from the heater surface acquired from below and from the side of the heater. The data indicate that microlayer evaporation and contact line heat transfer are not major heat transfer mechanisms for bubble growth. The dominant heat transfer mechanism appears to be transient conduction into the liquid as the liquid rewets the wall during the bubble departure process.

Yerramilli, Vamsee K.↗
NASA NTRS1985

Finite-amplitude steady waves in plane viscous shear flows

Computations of two-dimensional solutions of the Navier-Stokes equations are carried out for finite-amplitude waves on steady unidirectional flow. Several cases are considered. The numerical method employs pseudospectral techniques in the streamwise direction and finite differences on a stretched grid in the transverse direction, with matching to asymptotic solutions when unbounded. Earlier results for Poiseuille flow in a channel are re-obtained, except that attention is drawn to the dependence of the minimum Reynolds number on the physical constraint of constant flux or constant pressure gradient. Attempts to calculate waves in Couette flow by continuation in the velocity of a channel wall fail. The asymptotic suction boundary layer is shown to possess finite-amplitude waves at Reynolds numbers orders of magnitude less than the critical Reynolds number for linear instability. Waves in the Blasius boundary layer and unsteady Rayleigh profile are calculated by employing the artifice of adding a body force to cancel the spatial or temporal growth. The results are verified by comparison with perturbation analysis in the vicinity of the linear-instability critical Reynolds numbers.

Milinazzo, F. A.↗
NASA NTRS2005

Time and Space Resolved Wall Temperature Measurements during Nucleate Boiling with Constant Heat Flux Boundary Conditions

The lack of temporally and spatially resolved measurements under nucleate bubbles has complicated efforts to fully explain pool-boiling phenomena. The objective of this current work is to acquire time and space resolved temperature distributions under nucleate bubbles on a constant heat flux surface. This was performed using a microheater array with 100 micron resolution that allowed effectively simultaneous measurements of surface temperature while supplying a constant dissipative heat flux. This data is then correlated with high speed (> 1000Hz) visual recordings of the bubble growth and departure from the heater surface acquired from below and from the side of the heater. The data indicate that a significant source of energy during bubble nucleation and initial growth is the superheated layer around the bubble. Bubble coalescence was not observed to decrease surface temperature as significantly as bubble departure from the surface. Since bubble departure is typically followed by a sharp increase in the heater surface temperature, it is surmised that the departing bubble effectively removes the superheated layer, allowing a high local heat transfer rate with the bulk fluid through transient conduction/micro-convection during rewetting.

Myers, Jerry G.↗
NASA NTRSDate not supplied

The Impact of Drifting Orbits on the Monthly Regional TOA Flux Assuming Constant Meteorology

The NASA Clouds and the Earth's Radiant Energy System (CERES) gridded Single Scanner Footprint (SSF1deg) product provides TOA SW and LW monthly 1° regional all-sky fluxes, which are used to monitor the Earth’s energy balance. The CERES long-term climate data record relies on Terra and Aqua satellite sun-synchronous orbits that are maintained at 10:30 and 1:30 local equator crossing times (LECT), respectively. The Terra and Aqua satellites are expected to drift outside of their respective LECT during mid 2022. Both Terra and Aqua will drift over several years towards sunrise and sunset, respectively, and eventually will be deorbited. The CERES SSF1deg product monthly regional fluxes are based on the well calibrated and stable CERES observed fluxes and are temporally interpolated assuming constant meteorology between measurements to resolve the regional diurnal flux cycle to obtain a daily averaged flux. The drifting orbits may impact the monthly regional TOA flux over regions with systematic diurnal cycles, because the observations will shift in local time. The CERES project would like to determine the maximum Terra and Aqua LECT time shift before the monthly regional fluxes are diurnally impacted and become unreliable for long-term climate monitoring. To determine the impact of the drifting orbits on the SSF1deg monthly regional fluxes,15-minute Geostationary Earth Radiation Budget (GERB) broadband observed fluxes over the Meteosat geostationary satellite domain (±60° in longitude and latitude) are used as proxy CERES observations. The drifting orbit sampling pattern is achieved by simply incrementing the observation time by steps of 15 minutes from the CERES footprint time. For each 15-minute time interval, the CERES observed fluxes are replaced by the GERB observed fluxes. The-15 minute incremented monthly regional fluxes based on constant meteorology are compared to the reference 10:30 and 1:30 LECT fluxes. Regions with systematic diurnal cycles, include morning maritime stratus, where the clouds dissipate during the morning, and land afternoon convection, where clouds increase in the afternoon will impact the regional flux differences. Based on January and July 2010 GERB data, even a 15-minute LECT change caused regional monthly flux differences that would impact long term regional trend analysis. Results will be shown at the conference.

David Doelling↗
NASA NTRSDate not supplied

The Orbital Drift Impact on the Monthly Regional TOA Flux Assuming Constant Meteorology

The NASA Clouds and the Earth's Radiant Energy System (CERES) gridded Single Scanner Footprint (SSF1deg) product provides TOA SW and LW monthly 1° regional all-sky fluxes, which are used to monitor the Earth’s energy balance. The CERES long-term climate data record relies on Terra and Aqua satellite sun-synchronous orbits that are maintained at 10:30 and 1:30 local equator crossing times (LECT), respectively. The Terra and Aqua satellites are expected to drift outside of their respective LECT during mid 2022. Both Terra and Aqua will drift over several years towards sunrise and sunset, respectively, and eventually will be deorbited. The CERES SSF1deg product monthly regional fluxes are based on the well calibrated and stable CERES observed fluxes and are temporally interpolated assuming constant meteorology between measurements to resolve the regional diurnal flux cycle to obtain a daily averaged flux. The drifting orbits may impact the monthly regional TOA flux over regions with systematic diurnal cycles, because the observations will shift in local time. The CERES project would like to determine the maximum Terra and Aqua LECT time shift before the monthly regional fluxes are diurnally impacted and become unreliable for long-term climate monitoring. To determine the impact of the drifting orbits on the SSF1deg monthly regional fluxes,15-minute Geostationary Earth Radiation Budget (GERB) broadband observed fluxes over the Meteosat geostationary satellite domain (±60° in longitude and latitude) are used as proxy CERES observations. The drifting orbit sampling pattern is achieved by simply incrementing the observation time by steps of 15 minutes from the CERES footprint time. For each 15-minute time interval, the CERES observed fluxes are replaced by the GERB observed fluxes. The-15 minute incremented monthly regional fluxes based on constant meteorology are compared to the reference 10:30 and 1:30 LECT fluxes. Regions with systematic diurnal cycles, include morning maritime stratus, where the clouds dissipate during the morning, and land afternoon convection, where clouds increase in the afternoon will impact the regional flux differences. Based on January and July 2010 GERB data, even a 15-minute LECT change caused regional monthly flux differences that would impact long term regional trend analysis. Results will be shown at the conference.

D R Doelling↗
NASA NTRS2022

Ensemble Simulations of the 2012 July 12 Coronal Mass Ejection with the Constant-turn Flux Rope Model

Flux-rope-based magnetohydrodynamic modeling of coronal mass ejections (CMEs) is a promising tool for prediction of the CME arrival time and magnetic field at Earth. In this work, we introduce a constant-turn flux rope model and use it to simulate the 2012 July 12 16:48 CME in the inner heliosphere. We constrain the initial parameters of this CME using the graduated cylindrical shell (GCS) model and the reconnected flux in posteruption arcades. We correctly reproduce all the magnetic field components of the CME at Earth, with an arrival time error of approximately 1 hr. We further estimate the average subjective uncertainties in the GCS fittings by comparing the GCS parameters of 56 CMEs reported in multiple studies and catalogs. We determined that the GCS estimates of the CME latitude, longitude, tilt, and speed have average uncertainties of 5°.74, 11°.23, 24°.71, and 11.4%, respectively. Using these, we have created 77 ensemble members for the 2012 July 12 CME. We found that 55% of our ensemble members correctly reproduce the sign of the magnetic field components at Earth. We also determined that the uncertainties in GCS fitting can widen the CME arrival time prediction window to about 12 hr for the 2012 July 12 CME. On investigating the forecast accuracy introduced by the uncertainties in individual GCS parameters, we conclude that the half-angle and aspect ratio have little impact on the predicted magnetic field of the 2012 July 12 CME, whereas the uncertainties in longitude and tilt can introduce relatively large spread in the magnetic field predicted at Earth.

Talwinder Singh↗
NASA NTRS1978

A constant heat flux model of the evaporating interline region

An approximate procedure is developed for determining the heat sink capability of an interline region (junction of vapor, evaporating thin film, and nonevaporating thin film), with consideration of the effect of resistance of the solid to heat transfer. The formulation is based on a simple one-dimensional constant heat flux model. The solution is directed toward a limiting case in which the thermal conductance of the solid is controlling. Since the value of the ideal liquid-vapor interfacial heat transfer coefficient is very large, conductance of the solid is found to dominate the overall heat transfer coefficient in the interline region after a small increase in film thickness.

Wayner, P. C., Jr.↗
NASA NTRS2003

Time and Space Resolved Heat Transfer Measurements Under Nucleate Bubbles with Constant Heat Flux Boundary Conditions

Investigations into single bubble pool boiling phenomena are often complicated by the difficulties in obtaining time and space resolved information in the bubble region. This usually occurs because the heaters and diagnostics used to measure heat transfer data are often on the order of, or larger than, the bubble characteristic length or region of influence. This has contributed to the development of many different and sometimes contradictory models of pool boiling phenomena and dominant heat transfer mechanisms. Recent investigations by Yaddanapyddi and Kim and Demiray and Kim have obtained time and space resolved heat transfer information at the bubble/heater interface under constant temperature conditions using a novel micro-heater array (10x10 array, each heater 100 microns on a side) that is semi-transparent and doubles as a measurement sensor. By using active feedback to maintain a state of constant temperature at the heater surface, they showed that the area of influence of bubbles generated in FC-72 was much smaller than predicted by standard models and that micro-conduction/micro-convection due to re-wetting dominated heat transfer effects. This study seeks to expand on the previous work by making time and space resolved measurements under bubbles nucleating on a micro-heater array operated under constant heat flux conditions. In the planned investigation, wall temperature measurements made under a single bubble nucleation site will be synchronized with high-speed video to allow analysis of the bubble energy removal from the wall.

Myers, Jerry G.↗
NASA NTRS1991

Shortwave shape factor inversion of earth radiation budget observations

Results are presented on an investigation of the effects of various assumptions (including assumptions of a constant flux field, a constant albedo field, and a variable albedo field) used for deriving the shortwave shape factor on the estimates, from radiometric measurements, of the albedo at the top of the atmosphere. The accuracies and the resolutions of the shape-factor-flux estimates obtained using these assumptions are determined by simulating the shape factor inversion technique with scanner data from the Earth Radiation Budget Experiment (ERBE). The resulting biases and variances are given for both the ERBE medium-field-of-view and wide-field-of-view radiometers.

Green, Richard N.↗
DOE OSTI2020

Numerical study of heat transfer enhancement in laminar and turbulent flow in enhanced tubes with uniform and non-uniform thermal boundary conditions

Various types of tube enhancements have been proposed in order to increase heat transfer while minimizing any associated increases in pressure drop. This paper presents a numerical study of two different types of enhanced tubes: the relatively common twisted tape insert tube, and a novel tube with airfoil shaped pins on the inner surface. Each tube is studied in both the laminar and turbulent flow regime. In addition to the typical constant temperature and constant flux boundary conditions, a non-constant heat flux boundary condition is applied on one half of the tube, a situation which may be encountered when absorbing solar radiation. In general, each type of enhanced tube offers a thermal performance factor greater than unity at certain Re. In addition, the non-uniform heat flux boundary condition appears to function similarly as the uniform heat flux boundary condition.

Sandlin, Matthew J.↗
DOE OSTI2024

Numerical study of heat transfer enhancement in laminar and turbulent flow in enhanced tubes with uniform and non-uniform thermal boundary conditions

Various types of tube enhancements have been proposed in order to increase heat transfer while minimizing any associated increases in pressure drop. This paper presents a numerical study of two different types of enhanced tubes: the relatively common twisted tape insert tube, and a novel tube with airfoil shaped pins on the inner surface. Each tube is studied in both the laminar and turbulent flow regime. In addition to the typical constant temperature and constant flux boundary conditions, a non-constant heat flux boundary condition is applied on one half of the tube, a situation which may be encountered when absorbing solar radiation. In general, each type of enhanced tube offers a thermal performance factor greater than unity at certain Re. In addition, the non-uniform heat flux boundary condition appears to function similarly as the uniform heat flux boundary condition.

Sandlin, M↗
NASA NTRS2000

Case Study of Solar Wind and IMF Influence on Ionospheric Outflow

We examine ionospheric outflows in the high attitude magnetospheric polar cap during the POLAR satellite's apogee on 04/19/96 using the TIDE instrument. The pass has a fairly constant flux of H+ which is similar to many other passes, but there is a large amount of O+ present. The elevated levels of O+ may be due both to the geophysical conditions during the apogee pass (Kp=5) and prior to the pass. When the outflows for many high altitude polar cap passes are analyzed the O+ density correlates well with the dynamic pressure. There are several aspects of this pass which are interesting besides the abundance of O+ relative to H+. In this pass both the H+ and O+ outflow velocity correlate with both the solar wind speed and Interplanetary Magnetic Field (IMF) Bx. The geophysical conditions are such that the solar wind speed and IMF Bx are highly correlated with each other. For this case the dynamic pressure of the solar wind is fairly constant and has an average value of about 2.5 nPa which is typical for the solar wind, but the average solar wind speed is about 695 km/s which is greater than 450 km/s which is typical for the solar wind at I AU. The ion outflow measurements themselves are interrelated. The H+ density and parallel speed are anticorrelated which results in the constant flux. The 0+ density does not have as large of a anticorrelation with its parallel speed as H+ does with its parallel speed.

Elliott, H. A.↗
NASA NTRS1990

Flux-Feedback Magnetic-Suspension Actuator

Flux-feedback magnetic-suspension actuator provides magnetic suspension and control forces having linear transfer characteristics between force command and force output over large range of gaps. Hall-effect devices used as sensors for electronic feedback circuit controlling currents flowing in electromagnetic windings to maintain flux linking suspended element at substantially constant value independent of changes in length of gap. Technique provides effective method for maintenance of constant flux density in gap and simpler than previous methods. Applications include magnetic actuators for control of shapes and figures of antennas and of precise segmented reflectors, magnetic suspensions in devices for storage of angular momentum and/or kinetic energy, and systems for control, pointing, and isolation of instruments.

Groom, Nelson J.↗