Search NASA⌕ Search

SEARCH · Search NASA

Results for “contact discontinuity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A numerical extension of the spatially-filtered Euler equations for contact discontinuities

Solving the spatially-filtered Euler equations with a kinetic energy-preserving centered discretization is an efficient framework for simulating shock-dominated flows. Here, the present work describes a numerical treatment of the spatially-filtered Euler equations to minimize oscillations when simulating contact discontinuities. To counteract dispersive errors inherent to centered schemes, a WENO-like correction term is applied to the enthalpy transport in the energy equation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Vanishing adsorption limit of Riemann problem solutions for the polymer model

Here we examine the vanishing adsorption limit of solutions of Riemann problems for the Glimm–Isaacson model of chemical flooding of a petroleum reservoir. A contact discontinuity is deemed admissible if it is the limit of traveling waves or rarefaction waves for an augmented system that accounts for weak chemical adsorption onto the rock. We prove that this criterion justifies the admissibility criteria adopted previously by Keyfitz–Kranzer, Isaacson–Temple and de Souza–Marchesin, provided that the fractional flow function depends monotonically on chemical concentration. We also demonstrate that the adsorption criterion selects the undercompressive contact discontinuities required to solve the general Riemann problem in an example model with non-monotone dependence.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

FSISPH: An SPH formulation for impacts between dissimilar materials

Here, we present an SPH formulation with several new features designed to better model the fully-compressible interaction of dissimilar materials. We developed the new method to simulate the atmospheric entry and break-up of small celestial bodies in planetary atmospheres. The formulation uses a unity-based, density-energy discretization of the hydrodynamic conservation laws with linear-corrected kernel gradients. To account for variations in compressibility, we use an HLLC approximate Riemann solver to adjust the velocity gradient at material interfaces. To handle large transverse velocity discontinuities, we introduce a simple slip interface model that limits the artificial viscosity at material interfaces. Diffusion is optionally applied through the velocity gradient and this allows the density and specific thermal energy to evolve in a manner more consistent with the first law of thermodynamics in comparison to other more direct diffusion schemes. We also introduce a material-local second-order artificial conduction scheme used to smooth the specific thermal energy field. Material damage fits neatly under this framework by treating the damage front as a material interface. The method has been implemented as a solver, FSISPH, within the code, Spheral++, and is publicly available on github. We test our new solver on a number of classic shock, mixing, and multi-material problem. The components we outline can significantly improve accuracy of SPH for problems with sharp contact discontinuities.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

A Shock Stabilization of the HLLC Riemann Solver for the Carbuncle Instability

The HLLC approximate Riemann solver improves upon the HLL Riemann solver by resolving contact discontinuities. This is a particularly desirable property for multi-material codes in which problems usually contain material interfaces. However, the HLLC solver is known to suffer from the carbuncle phenomenon, a numerical instability most apparent at grid-aligned shocks in multi-dimensional simulations. Many problems of interest, including high energy-density physics applications, require the accurate resolution of both material interfaces and hydrodynamic shocks. A variety of methods have been developed to cure this instability, with varying degrees of complexity. The objective of this work is to describe a simple approach to modify the HLLC Riemann solver and prevent the carbuncle instability. Here, the method is then demonstrated for assorted two-dimensional test problems known to exhibit the shock instability. The performance of the new solver is compared with that of the standard HLL and HLLC Riemann solvers.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Direct numerical simulations of turbulent reacting flows with shock waves and stiff chemistry using many-core/GPU acceleration

Compressible reacting flows may display sharp spatial variation related to shocks, contact discontinuities or reactive zones embedded within relatively smooth regions. The presence of such phenomena emphasizes the relevance of shock-capturing schemes such as the weighted essentially non-oscillatory (WENO) scheme as an essential ingredient of the numerical solver. However, these schemes are complex and have more computational cost than the simple high-order compact or non-compact schemes. In this paper, we present the implementation of a seventh-order, minimally-dissipative mapped WENO (WENO7M) scheme in a newly developed direct numerical simulation (DNS) code called KAUST Adaptive Reactive Flows Solver (KARFS). In order to make efficient use of the computer resources and reduce the solution time, without compromising the resolution requirement, the WENO routines are accelerated via graphics processing unit (GPU) computation. The performance characteristics and scalability of the code are studied using different grid sizes and block decomposition. Furthermore, the performance portability of KARFS is demonstrated on a variety of architectures including NVIDIA Tesla P100 GPUs and NVIDIA Kepler K20X GPUs. In addition, the capability and potential of the newly implemented WENO7M scheme in KARFS to perform DNS of compressible flows is also demonstrated with model problems involving shocks, isotropic turbulence, detonations and flame propagation into a stratified mixture with complex chemical kinetics.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

A block-spectral adaptive H-/$p$-refinement strategy for shock-dominated problems

An adaptive H-/p-refinement strategy using a novel sensor is devised and tested in a block-spectral compressible Euler code equipped with adaptive-mesh refinement (AMR) and high-order flux-reconstruction numerics. At each Gauss quadrature point (or solution point) within each spectral block (or mesh element) the discrete velocity jump ΔU = ∂U/∂y 1 Δy 1 + ∂V/∂y 2 Δy 2 + ∂W/∂y 3 Δy 3 is calculated and normalized by the local speed of sound, a. Here, the grid spacing, Δx i , is calculated in each direction as the distance between auxiliary Gauss-Lobatto points, staggered relative to the solution points. The polynomial order is increased from p = 0 to p = p max in regions of weak compression, (ΔU/a) crit < ΔU/a < 0 and kept at p = p max in regions of flow expansion ΔU/a ≥ 0, while staying at the H = 0 base mesh level. Regions experiencing strong compressions, i.e. ΔU/a < (ΔU/a) crit , are H-refined up to H = H max where H max is applied at the location of maximum compression, ΔU/a = min(ΔU/a) in the domain, while keeping p = 0 to guarantee robustness and monotonicity of the solution in the H refined region. The critical value of (ΔU/a) crit = -0.06 is found to effectively separate smooth and non-smooth solution regions, supported by a 1D detonation initiation test case in ideal gas and a shock-to-detonation transition in high explosives. Using this value, the Sod shock tube, Shu-Osher problem, double Mach reflection and a 2D detonation in a high-explosive are simulated with the proposed adaptive H-/p-refinement. In the Sod shock tube case, p-refinement resolves the (weak) contact discontinuity while H-refinement enhances the grid resolution in the shock exploiting the monotonicity of the p = 0 reconstruction. For the Shu-Osher problem, p-refinement captures the small-scale oscillations trailing the shock that would be otherwise attenuated, while H-refinement triggered by the ΔU-sensor appropriately tracks the shock. In the double Mach reflection problem, H-refinement confines the numerical diffusion around the reflected shock while p-refinement recaptures many physical features trailing the shock. Finally, in the 2D high-explosive detonation case, H-refinement follows the leading shock and resolves the curvature of the detonation wave, while p-refinement adds resolution to the trailing reaction zone. Finally, the proposed methodology is tested in a detonation-wave propagation test case in high-explosives with numerical predictions comparing favorably against experiments.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

A cell-centered AMR-ALE framework for 3D multi-material hydrodynamics. Part II: linesweep ALE rezoning for nonconformal block-structured AMR meshes

The simulation of flows presenting contact discontinuities, vorticity, and large variations in spatial scales can be performed in a framework coupling Arbitrary Lagrangian Eulerian (ALE) algorithms and Adaptive Mesh Refinement (AMR). This coupling requires adaptation of ALE rezoning techniques to meshes containing nonconformal nodes arising from both the AMR topology and the junction of mesh blocks. Here, in this paper, we present an ALE rezoning strategy that is compatible with such meshes, and that can also act as a disentangling algorithm. Emphasis is put on an algorithm that respects intrinsic Lagrangian mesh properties in order to preserve accuracy around discontinuities. To that end, we adapt the weighted linesweep algorithm to nonconformal block-structured AMR meshes. Then, we present control parameters introduced in the method for it to be applicable in practical situations. Notably, the method is coupled to a specific metric optimization in order to palliate some shortcomings of the linesweep method. Finally, numerical test cases are presented that feature the capabilities of the ALE-AMR algorithm for flows that present discontinuities, vorticity, and a variety of scales. Notably, we show that our ALE-AMR algorithm gives results at least similar to Euler-AMR, but provides better accuracy in cases where discontinuities are involved, thanks to a method that respects the Lagrangian features of the mesh. Additionally, it enables Euler-AMR-like computations on domains with temporally varying domain boundaries.

Adaptive mesh refinement↗
DOE OSTI2021

Numerical Diffusion (Mixing) of Material in Numerical Simulations of Hydrodynamics [Slides]

It is often assumed that a material interface between two materials is spread over a few numerical cells in numerical simulations for hydrodynamics. Also, we have the impression that higher order methods introduce less numerical diffusion (mixing) of material. As we know one of the purposes of adaptive mesh refinement (AMR) is to resolve interfaces between materials, but we would like to know how effective AMR is to reduce numerical diffusion of material. We will present our investigation about numerical diffusion (mixing) of material in xRage. The result of the investigation indicates that the assumptions mentioned above are not always valid. In this talk, we will also demonstrate the effectiveness of numerical techniques to reduce numerical diffusion of material, including contact discontinuity steepening, isotropic interface steepening, max interface steepening, material interface reconstruct.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Shocked Transport: Experiments to Study Dynamic Particle Behavior under Varying Volume Fraction Conditions

Shocks interacting with densely-packed porous media is common in volcanic eruptions or in engineering applications such as ordinance. Large-scale, exploratory experiments have been performed by Frost and collaborators examining the behavior of a bed of particles subjected to a detonation wave. The detonation replaces the central explosive with a high-density, high-temperature gas that propagates outward. A shock wave travels through the particle bed, followed by a contact discontinuity between the shocked air and the explosive products. In the early times, the detonation wave causes many of the particles to collide and compact with each other. As the particles disperse, the experiments demonstrate a series of large-scale jets or fingers that form in the advancing particle front.

42 ENGINEERING↗
DOE OSTI2025

A Wind-driven Origin for the Firework Morphology of the Supernova Remnant Pa 30

Pa 30—the likely remnant of the Galactic Type Iax supernova of 1181 AD—displays an unusual, firework-like morphology, consisting of radial filaments extending from a common center, where a white dwarf (WD) currently drives a very fast wind (speed ≳10 4 km s −1 ). We propose the filaments arose from the Rayleigh–Taylor-unstable nature of the interface between the circumstellar medium (CSM) and the shocked wind launched by the natal WD; the filaments then elongated intact due to the Kelvin–Helmholtz-stable nature of the large initial density contrast between the wind and CSM, supplemented by the slowly declining wind density profile (relative to homologously expanding ejecta). To support this interpretation, we present two-dimensional hydrodynamical simulations and derive the filament properties, including their speed, density, and temperature, all of which are consistent with observations. We suggest the filaments elongate until the wind and CSM densities become comparable at the contact discontinuity, which occurs within 1–10 yr, and then truncate because the Rayleigh–Taylor instability (RTI) halts. The subsequent Kelvin–Helmholtz instability growth timescale across the current width of the filaments is longer than the age of Pa 30, so they remain intact. The filament-less central region in Pa 30 is therefore more likely a consequence of the finite timescale over which the RTI operates, rather than a wind termination shock. In general, firework-like filaments may form in other systems, provided there is a sufficiently large density contrast between the ejecta and its surroundings.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Insights on the continuous representations of piecewise-smooth nonlinear systems: limits of applicability and effectiveness

Dynamical systems subject to intermittent contact are often modeled with piecewise-smooth contact forces. However, the discontinuous nature of the contact can cause inaccuracies in numerical results or failure in numerical solvers. Representing the piecewise contact force with a continuous and smooth function can mitigate these problems, but not all continuous representations may be appropriate for this use. Here, five representations used by previous researchers (polynomial, rational polynomial, hyperbolic tangent, arctangent, and logarithm-arctangent functions) are studied to determine which ones most accurately capture nonlinear behaviors including super- and subharmonic resonances, multiple solutions, and chaos. The test case is a single-DOF forced Duffing oscillator with freeplay nonlinearity, solved using direct time integration. This work intends to expand on past studies by determining the limits of applicability for each representation and what numerical problems may occur.

42 ENGINEERING↗
DOE OSTI2024

AEOLIAN INTERDUNE FACIES OF THE NAVAJO SANDSTONE, UTAH

During the Early Jurassic an extensive desert environment covered a large area of the Western Interior of the USA. The Navajo Sandstone erg is thought to be one of the largest dunefields preserved in the rock record, estimated to have covered well over 500,000 km2, though the preserved extent is less due to erosion. The Navajo Sandstone outcrops extensively in eastern and southern Utah, forming spectacular domes and arches, including those in Arches National Park. Navajo Sandstone aeolian dunes consist of stacked, tabular sandstone bodies, displaying steeply dipping crossbedding, and are on average 15 m thick, with high porosity and permeability. In addition to these extensive paleodunes, interdune deposits are also documented, consisting of lensoid sandstone or pale grey limestone, of approximately 1-7 m thick. This research forms part of a broader investigation into the Navajo Sandstone in Utah, focusing on its potential as a CO2 reservoir. The internal stratigraphy of the Navajo Sandstone can be complex, with multiple types of aeolian surfaces present including discontinuous inter-dune contacts, and inclined bedding planes associated with large climbing dunes. Interdune deposits may be associated with more laterally extensive stratigraphic surfaces, highlighting their importance in the internal stratigraphic framework of the Navajo Sandstone erg. Here we interpret facies and depositional processes of aeolian interdune deposits of the Navajo Sandstone throughout Utah, using well log, outcrop, and thin sections. Interdune deposits range in type from short lived, small ponds of predominantly reworked aeolian sediment, to comparatively long-lived oases consisting of lakes with extensive ecosystems. This project aims to increase our understanding of an important potential CO2 reservoir, and enhance understanding of stratigraphic complexity within one of the world's most significant aeolian systems.

Mahon, Elizabeth (ORCID:0000000252692454)↗
DOE OSTI2020

Microscale mechanical modeling of deformable geomaterials with dynamic contacts based on the numerical manifold method

Abstract Micromechanical modeling of geomaterials is challenging because of the complex geometry of discontinuities and potentially large number of deformable material bodies that contact each other dynamically. In this study, we have developed a numerical approach for micromechanical analysis of deformable geomaterials with dynamic contacts. In our approach, we detect contacts among multiple blocks with arbitrary shapes, enforce different contact constraints for three different contact states of separated, bonded, and sliding, and iterate within each time step to ensure convergence of contact states. With these features, we are able to simulate the dynamic contact evolution at the microscale for realistic geomaterials having arbitrary shapes of grains and interfaces. We demonstrate the capability with several examples, including a rough fracture with different geometric surface asperity characteristics, settling of clay aggregates, compaction of a loosely packed sand, and failure of an intact marble sample. With our model, we are able to accurately analyze (1) large displacements and/or deformation, (2) the process of high stress accumulated at contact areas, (3) the failure of a mineral cemented rock samples under high stress, and (4) post-failure fragmentation. The analysis highlights the importance of accurately capturing (1) the sequential evolution of geomaterials responding to stress as motion, deformation, and high stress; (2) large geometric features outside the norms (such as large asperities and sharp corners) as such features can dominate the micromechanical behavior; and (3) different mechanical behavior between loosely packed and tightly packed granular systems.

58 GEOSCIENCES↗
DOE OSTI2024

A high-order, localized-artificial-diffusivity method for Eulerian simulation of multi-material elastic-plastic deformation with strain hardening

A high-order method for Eulerian simulation of material undergoing large elastic–plastic deformation is developed. Thermodynamically consistent hyperelastic constitutive relations are assumed, facilitating the treatment of solids, liquids, and gases in a unified manner. Here, the method enables the simulation of multi-material interactions using a diffuse interface approach. Numerical capturing of material interfaces, shock waves, contact surfaces, and elastic-plastic strain discontinuities using high-order compact-difference schemes is assisted by Localized Artificial Diffusivity (LAD). In the new setting involving elastic–plastic deformation, the previously established terms for the artificial properties are verified to effectively regularize normal shocks. Additional LAD terms are introduced to the elastic and plastic kinematic equations to regularize shear shocks and other strain discontinuities, improving solution stability. Other important features of the method that improve robustness include the numerical treatment of compatibility terms in the kinematic equations, and the treatment of rotation. Particular emphasis is focused toward new advancements of the methods for plastic-deformation integration and the associated strain hardening of the material, including rate-dependent plasticity. The method is demonstrated on a variety of test problems, including 1-D impacts, a variant of the Shu-Osher problem, a Taylor impact, and a Richtmyer-Meshkov instability between two elastic–plastic solids with strain hardening.

42 ENGINEERING↗
DOE OSTI2026

Comparative study on the formation of Cr and Ti ohmic contacts to (001) β -Ga 2 O 3

Here, a comparative study of Cr/Au and Ti/Au ohmic contacts on (001) β-Ga 2 O 3 was conducted. The electrical behavior from current-voltage measurements and the interfacial composition and microstructure as determined from high-resolution transmission electron microscopy (TEM) with energy dispersive x-ray analysis were compared for the different contacts at selected points in an annealing series (300–700 °C, 1 min. anneals in N 2 ). Cr/Au contacts became ohmic at temperatures (300–350 °C) approximately 50–100 °C lower than Ti/Au contacts (400–450 °C). Cr/Au and Ti/Au contacts demonstrated optimal ohmic behavior (lowest resistance) when annealed to 450–500 and 500–600 °C, respectively, with Ti/Au contacts yielding a lower total resistance than Cr/Au. Cross-sectional TEM images of Cr/Au contacts annealed at 450 °C revealed the presence of Au nanoclusters at the Ga 2 O 3 interface and CrO x layers at both the top of the contact and the Ga 2 O 3 interface. Whereas TiO x also formed at the top and bottom interfaces in 450 °C-annealed Ti/Au contacts, the TiO x surface layer appeared to be variable in thickness and/or discontinuous, unlike the CrO x surface layer. Au nanoclusters were not detected at the interface in the Ti/Au contacts. The interdiffusion and oxidation observed in both contact metallizations point to the need for diffusion barriers that may allow these contacts to be used in future Ga 2 O 3 -based devices that operate at elevated temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multi-scale Coupled Processes Modeling of Fractures as Porous, Interfacial and Granular Systems from Rock Images with the Numerical Manifold Method

Abstract The greatest challenges of rigorously modeling coupled hydro-mechanical processes in fractured rocks at different scales are associated with computational geometry. In addition, selections of continuous or discontinuous models, physical laws, and coupling priorities at different scales based on different geometric features determine the applicability of a numerical model for a certain type of problem. In this study, we present our multi-scale modeling capabilities that have been developed based on the numerical manifold method for analyzing coupled hydro-mechanical processes in fractured rocks. Based on their geometric features, the fractures are modeled as continua—finite-thickness porous zones, and discontinua—discontinuous interfaces and microscale asperities and granular systems. Different governing equations, physical laws, coupling priorities, and approaches for addressing fracture intersections and shearing are then applied to describe these. We applied these models to simulate coupled processes in fractured rocks using realistic geometry obtained from rock images at different scales. We first calculated shearing of a single fracture with different models and demonstrated the impacts of asperities on shearing. We then applied the continuous and discontinuous models to simulate a network of rough fractures, demonstrating that contact dynamics contribute significantly to the geometric, multi-physical evolution of systems where rough fractures are not mineral filled. For a discrete fracture network, our coupled processes modeling demonstrates that shearing of the discrete fractures can have a major impact on stress and pore pressure distribution. Lastly, we applied the discontinuous granular model to simulate evolution of a complex granular system with a deformation band, demonstrating that the deformation band can dominate contact dynamics, the structural and the stress evolution of the granular system.

58 GEOSCIENCES↗
DOE OSTI2025

A cohesive zone treatment for the material point method involving problems of large deformation and damage

A new algorithm is described that permits the use of cohesive zones in the material point method for problems involving large deformation and fracture. In contrast to previous cohesive zone implementations, this method does not utilize massless surface-element particles. Instead, cohesive tractions are computed using the shape function mappings from a reference grid configuration in combination with explicitly defined particle surface normals and surface positions. These normals and relative surface positions are updated each time step according to particle deformation. The tractions are converted to cohesive forces using the nodal areas and mapped back to particles using the same reference shape function mappings. These forces are then remapped by conventional particle-to-grid interpolation as external forces using the current-configuration shape-function mappings. This allows highly compliant cohesive zones to function over jump displacements larger than a grid cell. Upon damage, these interfaces can revert to conventional multi-field contact surfaces. This approach is general and readily applies to two and three dimensions as well as being compatible with damage-field gradient partitioning offering exceptional computational flexibility. The framework for this method enables other capabilities, such as improved contact precision using explicitly defined surface normals and positions, and a method to mitigate spurious material damage at weak discontinuities between stiff brittle materials and soft or compliant materials.

Cohesive zone↗
DOE OSTI2025

ULTIMATE Phase I project: Development of Niobium-based alloys for Turbine Applications

Current Ni-based alloys used in turbine blade applications are operating at 1100°C which is approximately 90% of the solidus of Ni-based alloys. Further increases in temperature can be achieved only through the use of alloys with higher solidus temperatures such as refractory alloys which include Mo, Nb, W, Ta alloys. Niobium has a unique combination of physical properties that include a high melting point (2468°C), lowest density (8.57 g/cc), and the lowest modulus amongst refractory alloys, a good thermal conductivity that increases from 45 W/mK at room temperature to 62 W/mK at 1093°C, good ductility with fabricability using traditional techniques, high strength, good creep resistance, and general chemical inactivity. Hence niobium alloys offer many advantages for use at the desired temperature of 1300°C. One of the major deterrents to the use of niobium and its alloys at high temperatures is achieving good oxidation resistance. In addition, achieving balanced properties of room temperature strength, ductility, fracture toughness, high temperature strength, and creep resistance required for 1300°C operation at a density of 9 g/cm 3 is extremely challenging since the addition of W which is a potent strengthener increases the density of the alloy. This project seeks to enable the development of a tri-layered turbine blade that can operate continuously at 1300°C with the core of the turbine blade providing good creep resistance, the second layer providing improved oxidation resistance over the core layer, and the third layer being an environmental barrier providing oxidation resistance. The objective of this Phase 1 project was to use computational modeling and advanced characterization tools to develop two classes of Nb alloys which could be used as the core layer and the transition layer. The first class of alloys developed in this project was a Nb-alloy designed to serve as the turbine blade core with excellent room temperature strength, ductility, and high temperature strength and creep resistance required for 1300°C operation. These alloys were designed to contain sufficient solute solution strengthening elements (W, Mo) but constrained by the density of alloy, along with the addition of elements such as Zr, Hf, Ta, C, and N to achieve a combination of primary and secondary carbide precipitation. A total of 38 “creep-resistant” alloys were designed and cast during the duration of the project. Processing techniques were developed to keep the oxygen contents as low as possible with typical oxygen contents less than 250 ppm. One alloy with a density of < 9.5 g/cc was successful in meeting the Phase 2 intermediate project mechanical property milestone requirements of room temperature ductility greater than 1.0%, 1200°C creep strain of less than 3% at 150 MPa and 100 hours in vacuum, and with solidus temperature greater than 1500ᵒC. The second class of alloys was designed to be a Nb-rich alloy with improved oxidation resistance when compared to the core layer and was designed specifically to be compatible with the core layer and the outer environmental barrier coating. This Nb- alloy will be specifically designed to be microstructurally stable at these temperatures when in contact with the core alloy and provide protection against catastrophic failure of the barrier coating. Two alloys were cast and processed but further development was discontinued to focus on the development of the creep resistant alloy.

36 MATERIALS SCIENCE↗