Search NASA⌕ Search

SEARCH · Search NASA

Results for “continuous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Manufacture of Carbon Foam in Continuous Process at Atmospheric Pressure

The objective is to develop continuous processing of carbon foam products made from coal at atmospheric pressure. Both carbon foam panels and lightweight carbon foam aggregates have been developed. A successful outcome would: 1) significantly reduce the cost to manufacture carbon foam through reductions in capital and labor costs, 2) significantly reduce the manufacturing time from weeks to hours, and 3) enable the manufacture of much larger volumes of carbon foam. All of these features are expected to enable carbon foam to enter much larger markets and create meaningful demand for U.S. coal.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Kinetic modelling of an environmentally friendly carbamazepine synthesis via urea and iminostilbene in batch and continuous processes

Accurate kinetic models for reaction systems allow for improved process understanding and greater quality control, which is particularly beneficial as the pharmaceutical industry shifts from batch to continuous manufacturing (CM). In this work, a first principles kinetic model has been developed for the synthesis of carbamazepine (CBZ) from iminostilbene and urea, starting in a batch reactor and subsequently in a continuous flow reactor. An eco-friendly reaction pathway using urea was selected to avoid the toxic reagents that are typically used for synthesis of CBZ. The kinetic parameters determined from batch reactions were utilized in a MATLAB based kinetic model to simulate the yield for the continuous process. Overall, good agreement between the model prediction and corresponding experimental values was observed for the batch and continuous reaction systems within the full factorial design space. However, the model slightly overpredicted the yield of the continuous reaction system for higher conversion values (>60%) since it did not account for the reverse reaction that can occur at the studied reaction conditions. Here, the use of broken order kinetics was compared with whole number orders, and it was determined that the whole number orders resulted in better agreement at all conversion values for the continuous system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Manufacture of Carbon Foam in Continuous Process at Atmospheric Pressure

CFOAM LLC has been manufacturing CFOAM® vitreous carbon foam from coal in panel form for several years. The process is currently set up in batch mode as two steps, where the first step is conducted at very high pressure. In order to reduce cost and increase capacity, a new process for making carbon foam is being developed that can be performed at atmospheric pressure. This advance in turn would enable the development of a continuous manufacturing process, which is also being pursued. Both carbon foam panels and light weight aggregates are being investigate. Progress on the evolution of the pilot scale manufacturing plant and initial results of processing, microstructure, properties and performance of carbon foam products made using this new process will be discussed. This project is being supported by a cooperative agreement with the Department of Energy – National Energy Technology Laboratory (DE-FOA-0002185, Area of Interest 4: Coal-Derived Carbon Foam Produced via a Continuous Process, award number DE-FE-0031992).

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Manufacture of Carbon Foam in Continuous Process at Atmospheric Pressure

CFOAM LLC has been manufacturing vitreous carbon foam from coal in panel form for several years. The process is currently set up in batch mode as two steps, where the first step is conducted at very high pressure. In order to reduce cost and increase capacity, a new process for making carbon foam is being developed that can be performed at atmospheric pressure. This advance in turn would enable the development of a continuous manufacturing process, which is also being pursued. Both carbon foam panels and light weight aggregates are being investigate. Progress on the evolution of the pilot scale manufacturing plant and initial results of processing, microstructure, properties and performance of carbon foam products made using this new process will be discussed. This project is being supported by a cooperative agreement with the Department of Energy – National Energy Technology Laboratory (DE-FOA-0002185, Area of Interest 4: Coal-Derived Carbon Foam Produced via a Continuous Process, award number DE-FE-0031992).

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Manufacture of Carbon Foam in Continuous Process at Atmospheric Pressure

CFOAM LLC has been manufacturing vitreous carbon foam from coal in panel form for several years. The process is currently set up in batch mode as two steps, where the first step is conducted at very high pressure. In order to reduce cost and increase capacity, a new process for making carbon foam is being developed that can be performed at atmospheric pressure. This advance in turn would enable the development of a continuous manufacturing process, which is also being pursued. Both carbon foam panels and light weight aggregates are being investigate. Construction of the pilot scale manufacturing plant has been completed and results of processing, microstructure, properties and performance of carbon foam products made using this new process will be discussed. This project is being supported by a cooperative agreement with the Department of Energy – National Energy Technology Laboratory (DE-FOA-0002185, Area of Interest 4: Coal-Derived Carbon Foam Produced via a Continuous Process, award number DE-FE-0031992).

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Recursive Use of the Short-Time Fast Fourier Transform for Signature Analysis in Continuous Processes

Although a nuclear reactor is a hostile environment for sensing and electrical communications, the reactor core is amenable to acoustic communication. An acoustic measurement infrastructure (AMI) has been installed in the Advanced Test Reactor (ATR) to record acoustic signals that can capture its different operating regimes. AMI uses coolant pumps as continuous signal sources, coolant and structural components as transmission lines, and accelerometers to capture system motion. A recursive signal processing technique based on the short-time fast Fourier transform (STFFT) for continuous processes provides unique signatures for diagnostic and prognostic analyses from the system motion data. Here this article presents a recursive STFFT methodology that processes acoustic signals from continuous industrial processes. The article first discusses the initial STFFT use with simulated data to elucidate the basic principles necessary to understand and interpret the STFFT results from actual pump vibration data. Each repetitive use of the STFFT on pump vibration data using the results from the prior STFFT processing will generate additional complimentary time-frequency-based signatures. These signatures are generated by the coolant pumps operating under different process conditions. After each use of the STFFT, the resulting signatures provide exemplary examples of the diversity and intuitive nature of recursively using the STFFT. This article focuses on recursively using the STFFT to provide numerous complimentary and diverse signatures that will ultimately be inputs for machine learning algorithms that provide predictive data analytics. The intuitive nature of the information and signatures from recursive STFFT processing will also bring intuitive interpretation capabilities to machine learning and predictive data analytic techniques.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Continuous Processing of Carbon Foam Products Made from Coal at Atmospheric Pressure

The main goal of the project was to create a continuous manufacturing process for carbon foam that operates at atmospheric pressure and can generate well-formed carbon foam panels and lightweight aggregates. This objective was accomplished and has enabled a platform where carbon foam products can be manufactured at significantly reduced cost and cycle time relative to the conventional high-pressure batch process, which in turn can enable the manufacture of much larger volumes of carbon foam. All these features should enable carbon foam to enter much larger markets and create meaningful demand for U.S. coal. Carbon foam panels and aggregate both consisted of at least 70 weight percent carbon per program requirements (typical was over 90-wt%), and at least 51 weight percent of the carbon was to be coal derived (typical was over 90-wt% carbon was from coal). Analyses regarding life cycle, technoeconomics, and final technological gaps have been documented in separate reports. This final report documents the methods used to attain the main goal and describes the technical results.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Coal to Carbon Fiber (C2CF) Continuous Processing for High Value Composites (Final Report)

Coal tar is a condensed and recovered by-product of the coking of metallurgical coal for steel production. The heaviest fraction of distilled coal tar is an isotropic pitch largely used as a binder in the manufacturing of carbonaceous electrodes for primary aluminum smelting and in electric arc furnaces. Coal tar pitch offers high carbon yield upon carbonization. In this project, a process to convert the domestically sourced isotropic coal tar pitch, containing very low particulates (QI = 0.32 wt.%), to form flow-domain mesophase pitch amenable for melt spinning into precursor (green) fibers for carbon fiber, was developed and optimized. The final reproducible processing developed is reviewed in this report, along with several characterizations of the mesophase pitch. A final definition of the characteristics of a ‘spinnable’ mesophase pitch is presented. With this mesophase pitch, reproducible and stable multifilament melt spinning was developed, producing green fiber tows with filament diameters of approximately 20 m. The multifilament melt spinning was the most challenging aspect of the project and required the most effort. The best practices learned from this project for melt spinning are reviewed in this report. Once spun, the green fibers were oxidatively stabilized, carbonized and graphitized under inert gas atmosphere to form the final carbon fibers. Given the relatively high softening point of the mesophase pitch, no issues of interfilament fusion were observed during batch oxidation, and subsequent batch carbonization and graphitization went smoothly in all cases. An ~ 80 wt.% conversion of the green fiber mass to final carbon fiber was achieved. After graphitization, the carbon fibers showed high tensile moduli (most were ~ 600 GPa, or 87 Msi) consistent with commercially-available high-performance pitch-based carbon fiber. However, tensile strength and strain to failure were comparatively low. Further work to reduce defects in and on the fiber surfaces would increase these properties. SEM imaging of the graphitic fiber textures is presented herein. Rudimentary composites were fabricated from the carbon fibers and characterized showing similar modulus to baseline composites fabricated with commercial carbon fiber. Finally, a basic economic analysis was done showing the potential to increase the value of the isotropic coal tar pitch by up to 13.6 to 136 times based on a carbon fiber value of $\$$5/lb to $\$$50/lb, respectively. Moreover, the site case study suggests that the coal tar from the single integrated steel mill could supply production of up to 16 kt/yr of carbon fiber. Finally, a technological gap analysis was done which shed light on remaining technical challenges. These challenges included: recovery and utilization of condensates from the mesophase pitch processing, further advancing and increasing stability of the multifilament melt spinning processing, optimization of the oxidation processing, defect reduction for increased carbon fiber strength, and the development of a weaving process towards carbon fiber fabrics. To maximize the coal value chain, the primary objectives of this project were to (a) develop and scale efficient processing technology for producing melt-spinnable mesophase pitch from isotropic coal tar pitch, (b) clarify and simplify tedious continuous fiber processing technologies (particularly multifilament melt spinning of mesophase pitch) towards the efficient production of high performance carbon fiber, and (c) demonstrate and characterize representative composite parts derived from the final carbon fiber. Immense progress was made on all 3 objectives and is detailed in this report.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Development of a microwave-assisted downdraft moving-bed gasifier for continuous processing of lignite and biomass chars

This research illustrates a microwave-assisted downdraft moving-bed gasifier for the first time. Such design enables continuous solid gasification process. An adjustable auger was applied to control the solid removal rate and the gas-solid interaction time. Both lignite and biomass chars were investigated to determine the capability of the current system for low-tar feedstocks with different densities. Here, the presented reactor design was able to operate continuously for 3 hours and 20 minutes under 700 ℃ and atmospheric pressure, with air as the gasifying agent. For yellow pine char, the processing rate could reach 34.1 grams per hour with decent syngas production. The downdraft moving-bed design shows better cold gas and syngas production efficiencies compared to the common fixed-bed design, due to controllable residence time and more homogeneous microwave heating. The limitations of the current design and the direction of novel microwave-assisted chemical reactor design were discussed. This novel reactor design provides a way to improve the efficiency of microwave-assisted gasification process and shows its potential to be incorporated into other established chemical reaction processes as a modular add-on.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A semi-continuous process for co-production of CO 2 -free hydrogen and carbon nanotubes via methane pyrolysis

Heterogeneous catalytic pyrolysis of hydrocarbons to produce CO 2 -free hydrogen and high-quality solid carbon have historically been stymied by issues related to catalyst deactivation by carbon formed during pyrolysis on the catalyst surface. In addition, a system that demonstrates sustained performance in terms of high conversion, high H 2 yield, and high quality of produced carbon has remained elusive. Here, we propose and demonstrate a semi-continuous methane pyrolysis process to H 2 and carbon nanotubes (CNTs) consisting of repeated pyrolysis and in situ (i.e., within the reactor) CNT dislodging by vigorous steam/argon fluidization. With this process, we demonstrate 10 process cycles with high H 2 yield from CH 4 and CNT dislodging in a fluidized-bed reactor with an Fe/q-Al 2 O 3 catalyst synthesized by an easily scalable incipient wetness impregnation process. We also identify and present opportunities for future catalyst and process development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Efficient Silicon Carbide (SiC) Fiber Manufacture: Continuous Processing of Novel Precursors via Modified Material Handling

General Atomics Electromagnetic Systems (GA-EMS) together with The Nonwovens Institute (NWI) and Harper International have executed on a development project to improve the production efficiency and reduce the production cost of silicon carbide (SiC) fiber – a critical material that advances US energy security and aerospace leadership. In the first budget period (BP1), the modified tow throughput (MTT) apparatus was developed, enabling fiber spinning in the form of loose coils rather than tightly packed spools (Figure 1) for batch processing of SiC fiber. This coil-based approach was proven to be capable of uniform fiber crosslinking and ceramic conversion, as well as demonstrating key process efficiencies while meeting the program fiber property targets.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Development of a continuous synthesis process for carbamazepine using validated in-line Raman spectroscopy and kinetic modelling for disturbance simulation

Mitigation of failure modes in the continuous synthesis (CS) of a drug substance (DS) has the potential to widen the adoption of continuous manufacturing (CM) technologies by the pharmaceutical industry. Here, this work demonstrates the development of a robust continuous process for the synthesis of carbamazepine (CBZ), an essential medicine as per the World Health Organization (WHO), facilitated by kinetic modelling and monitored by in-line Raman spectroscopy. Accurate kinetic modelling and the use of validated process analytical technology (PAT) models for quantitative measurement were found to play an important role in developing CS of drug substances. Kinetic data for the formation of CBZ from iminostilbene (ISB) were collected by batch reaction sampling and high-performance liquid chromatography (HPLC) analysis. A non-linear solver and iterative method was applied to determine two sets of Arrhenius parameters simultaneously for the reaction system by minimizing the standard error of the model fit. The start-up and dynamic equilibrium stages for the CS of CBZ using a continuous stirred tank reactor (CSTR) were modelled based on the batch kinetic data and employed to optimize conversion and simulate process disturbances. An in-line Raman spectroscopy method was successfully developed, validated, and integrated to determine the concentrations of CBZ and ISB within the operating range for the CS. The CS kinetic model was evaluated experimentally from startup to dynamic equilibrium over 10 residence times with monitoring by HPLC and in-line Raman spectroscopy. The developed kinetic model in tandem with in-line Raman spectroscopy successfully predicted disturbances due to changes in process variables and can serve as a useful tool in the future design of advanced process control strategies for the continuous synthesis of CBZ.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An energy storage dispatch optimization for demand-side management in industrial facilities

An energy storage (ES) dispatch optimization was implemented to test lithium-ion battery ES, supercapacitor ES, and compressed air ES on two different industrial facilities – one intermittent process facility and one continuous process facility. The model first shows the capability of optimizing the size of a single technology on a single industrial facility to maximize the return on investment. Then, for the same profile, the model identifies significant differences in the optimal size for different technologies based on their performance parameters. Third, the model identifies differences in the optimal size for each technology based on the facilities profile. Here the results show compressed air ES yields the highest return on investment for both facilities and provides insight for future development of ES systems.

25 ENERGY STORAGE↗
DOE OSTI2022

Optimizing neural networks

A system and method design and optimize neural networks. The system and method include a data store that stores a plurality of gene vectors that represent diverse and distinct neural networks and an evaluation queue stored with the plurality of gene vectors. Secondary nodes construct, train, and evaluate the neural network and automatically render a plurality of fitness values asynchronously. A primary node executes a gene amplification on a select plurality of gene vectors, a crossing-over of the amplified gene vectors, and a mutation of the crossing-over gene vectors automatically and asynchronously, which are then transmitted to the evaluation queue. The process continuously repeats itself by processing the gene vectors inserted into the evaluation queue until a fitness level is reached, a network's accuracy level plateaus, a processing time period expires, or when some stopping condition or performance metric is met or exceeded.

97 MATHEMATICS AND COMPUTING↗