Search NASA⌕ Search

SEARCH · Search NASA

Results for “convective clouds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Causal Directions Matter: How Environmental Factors Drive Convective Cloud Detrainment Heights

This study investigates how environmental factors influence the level of maximum detrainment (LMD) in deep convective clouds. Through a novel application of the Linear Non‐Gaussian Acyclic Model (LiNGAM), we discover causal structures between environmental variables and LMD, observed at six tropical sites operated by the Atmospheric Radiation Measurement (ARM) user facility. LiNGAM effectively identifies causal directions among variables of interest, revealing robust relationships such as those among the lifting condensation level (LCL), level of free convection (LFC), and convective inhibition (CIN), aligning with prior knowledge. Relative humidity is shown to directly influence LMD; however, this relationship exhibits strong nonlinearity and becomes difficult to detect when the contrast between oceanic and continental environments is excluded from the analysis. This study highlights the importance of establishing causal relationships before performing statistical inference.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Invigoration or Enervation of Convective Clouds by Aerosols?

Are convective clouds strengthened by the addition of aerosol particles? We present new theoretical calculations which starkly contrast previous results. Prior foundational work suggested that aerosols strongly invigorate convective cloud updrafts via changes to cold-phase processes. We show that the peak magnitude of invigoration by this mechanism is substantially reduced for cold-based storms. For warm-based storms, the updrafts are weakened, not strengthened, by aerosol-induced changes to cold-phase processes. Our calculations show that if invigoration occurs, it is driven primarily by changes to warm-phase processes and may be largest well before the storm reaches maturity. The calculations are based on a new formulation of the moist adiabatic lapse rate that accounts for freezing, supersaturation, and condensate loading. The results significantly reshape our understanding of the impact of aerosols on convective updrafts.

58 GEOSCIENCES↗
DOE OSTI2021

Transport and chemistry of isoprene and its oxidation products in deep convective clouds

Deep convective clouds can transport trace gases from the planetary boundary layer into the upper troposphere where subsequent chemistry may impact aerosol particle formation and growth. In this modelling study, we investigate processes that affect isoprene and its oxidation products injected into the upper troposphere by an isolated deep convective cloud in the Amazon. We run a photochemical box model with coupled cloud microphysics along hundreds of individual air parcel trajectories sampled from a cloud-resolving model simulation of a convective event. The box model simulates gas-phase chemical reactions, gas scavenging by liquid and ice hydrometeors, and turbulent dilution inside a deep convective cloud. The results illustrate the potential importance of gas uptake to anvil ice in regulating the intensity of the isoprene oxidation and associated low volatility organic vapour concentrations in the outflow. Isoprene transport and fate also depends on the abundance of lightning-generated nitrogen oxide radicals (NO x = NO + NO 2 ). If gas uptake on ice is efficient and lightning activity is low, around 30% of the boundary layer isoprene will survive to the cloud outflow after approximately one hour of transport, while all the low volatile oxidation products will be scavenged by the cloud hydrometeors. If lightning NO x is abundant and gas uptake by ice is inefficient, then all isoprene will be oxidised during transport or in the immediate outflow region, while several low volatility isoprene oxidation products will have elevated concentrations in the cloud outflow. Reducing uncertainties associated with the uptake of vapours on ice hydrometeors, especially HO 2 and oxygenated organics, is essential to improve predictions of isoprene and its oxidation products in deep convective outflows and their potential contribution to new particle formation and growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Investigating Aerosol and Meteorological Influences on Convective Clouds in Houston, Texas, during the TRACER/ESCAPE Field Campaigns

Aerosols serve as cloud condensation nuclei, shaping the microphysical properties of cloud droplets. Aerosol effects on convective clouds are complex and remain controversial. The debate centers around the process of aerosol-induced invigoration of deep convection, a phenomenon that could significantly affect convective cloud properties but lacks robust evidence due to methodological limitations in observational approaches and questions about the robustness of modeling studies. Resolving these discrepancies is crucial for understanding how aerosols affect the atmosphere. Here, this study examines the effects of meteorological and aerosol parameters in a weakly synoptic-driven convective environment, where the influence of aerosols may be more pronounced and observable. Daily atmospheric soundings and aerosol concentrations from several ground instruments collected during the summer of 2022 in Houston, Texas, as part of the Tracking Aerosol Convection interactions Experiment (TRACER) and Experiment of Sea Breeze Convection, Aerosols, Precipitation, and Environment (ESCAPE) field campaigns are analyzed. Statistical learning methods are applied to uncover the complex relationships between aerosols, meteorology, and convective cloud characteristics, such as cell area and echo-top height. The findings reveal that higher aerosol concentrations are associated with narrower convective cells, which we argue contradicts the idea of stronger convection with increased aerosol loading. However, once the data are clustered by the synoptic environment, the relationship between aerosol loading and convective cell area diminishes, indicating that the covariablity between synoptic-scale weather patterns, local thermodynamics, and aerosol loading makes it challenging to draw definitive conclusions about the specific impacts of aerosols on convective cloud properties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Description and Evaluation of a New Deep Convective Cloud Model Considering In-cloud Inhomogeneity

Convections still need to be parameterized in general circulation models (GCMs) in the coming decades. Performances of GCMs are significantly influenced by the convection schemes used. In contrast to most conventional cloud models that ignore in-cloud inhomogeneities, a new convective cloud model explicitly considering in-cloud inhomogeneities is developed. The new model adopts a single bulk plume approach, but divides the plume into a series of interacting sub-plumes in order to mimic the transition from the plume core to its edges. We implemented the new cloud model in NCAR Community Atmosphere Model version 5.0 (CAM5) and evaluated its performance. Single-column tests show a stronger mass flux profile and low-level detrainment with the new model. In global simulations, the long-lasting wet bias in the tropical free troposphere of CAM5 is alleviated. Spatial pattern and intensity distribution of precipitation is improved, but the global hydrological cycle is slightly over-enhanced. The diurnal cycle of tropical precipitation is also better captured though the precipitation peak still occurs earlier than the observations and the amplitude of the cycle tends to weaken. MJO simulation is slightly improved with the new scheme. In addition, the new cloud model generated more tropical cyclones, in better agreement with observations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Impacts of Varying Concentrations of Cloud Condensation Nuclei on Deep Convective Cloud Updrafts—A Multimodel Assessment

Abstract This study presents results from a model intercomparison project, focusing on the range of responses in deep convective cloud updrafts to varying cloud condensation nuclei (CCN) concentrations among seven state-of-the-art cloud-resolving models. Simulations of scattered convective clouds near Houston, Texas, are conducted, after being initialized with both relatively low and high CCN concentrations. Deep convective updrafts are identified, and trends in the updraft intensity and frequency are assessed. The factors contributing to the vertical velocity tendencies are examined to identify the physical processes associated with the CCN-induced updraft changes. The models show several consistent trends. In general, the changes between the High-CCN and Low-CCN simulations in updraft magnitudes throughout the depth of the troposphere are within 15% for all of the models. All models produce stronger (~+5%–15%) mean updrafts from ~4–7 km above ground level (AGL) in the High-CCN simulations, followed by a waning response up to ~8 km AGL in most of the models. Thermal buoyancy was more sensitive than condensate loading to varying CCN concentrations in most of the models and more impactful in the mean updraft responses. However, there are also differences between the models. The change in the amount of deep convective updrafts varies significantly. Furthermore, approximately half the models demonstrate neutral-to-weaker (~−5% to 0%) updrafts above ~8 km AGL, while the other models show stronger (~+10%) updrafts in the High-CCN simulations. The combination of the CCN-induced impacts on the buoyancy and vertical perturbation pressure gradient terms better explains these middle- and upper-tropospheric updraft trends than the buoyancy terms alone.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Impacts of cloud microphysics parameterizations on simulated aerosol–cloud interactions for deep convective clouds over Houston

Aerosol–cloud interactions remain largely uncertain with respect to predicting their impacts on weather and climate. Cloud microphysics parameterization is one of the factors leading to large uncertainty. Here, we investigate the impacts of anthropogenic aerosols on the convective intensity and precipitation of a thunderstorm occurring on 19 June 2013 over Houston with the Chemistry version of Weather Research and Forecast model (WRF-Chem) using the Morrison two-moment bulk scheme and spectral bin microphysics (SBM) scheme. We find that the SBM predicts a deep convective cloud that shows better agreement with observations in terms of reflectivity and precipitation compared with the Morrison bulk scheme that has been used in many weather and climate models. With the SBM scheme, we see a significant invigoration effect on convective intensity and precipitation by anthropogenic aerosols, mainly through enhanced condensation latent heating. Such an effect is absent with the Morrison two-moment bulk microphysics, mainly because the saturation adjustment approach for droplet condensation and evaporation calculation limits the enhancement by aerosols in (1) condensation latent heat by removing the dependence of condensation on droplets and aerosols and (2) ice-related processes because the approach leads to stronger warm rain and weaker ice processes than the explicit supersaturation approach.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Generating a stratocumulus-like cloud top in a convection-cloud chamber

Stratocumulus-topped boundary layers play a crucial role in influencing daily weather and earth energy balance. Entrainment at the stratocumulus cloud top affects the cloud’s lifetime, precipitation, and radiative properties, but our understanding remains limited due to the lack of resolution in both field observations and numerical simulations. A recently proposed convection-cloud chamber with detailed control of sidewall temperatures can provide a unique opportunity to explore this mechanism in a laboratory setting. In this work, we use numerical simulations to demonstrate that this design can produce a cloud top that mimics the entrainment interfacial layer in a stratocumulus cloud. Our results show that a steady-state cloud can be formed by cooling the lower portions of the sidewalls and warming the bottom surface, while a temperature inversion at the cloud top can be generated by keeping the upper sidewalls and top surface warmer than the bottom. The turbulent kinetic energy profile and budget are similar to those found in a convective boundary layer, and inhomogeneous mixing near the cloud top can be observed. These findings significantly enhance the scientific value of constructing the tall convection-cloud chamber.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

An Observational Comparison of Level of Neutral Buoyancy and Level of Maximum Detrainment in Tropical Deep Convective Clouds

Tropical deep convective clouds are important drivers of large-scale atmospheric circulation representing the main vertical transport pathway through the depth of the troposphere for heat, momentum, water, and chemical species. The strength and depth of this transport are impacted by the convective updraft size and intensity that are driven by buoyancy, dynamical forcing, and mixing of environmental air, i.e., entrainment. In this paper, we identify tropical deep convective systems with well-defined forward anvils using Atmospheric Radiation Measurement (ARM) ground-based profiling radars, at three ARM fixed-sites in the Tropical Western Pacific (TWP; i.e., Manus, Nauru, Darwin) and three ARM Mobile Facility deployments in Niamey, Niger; Gan Island, Maldives; and Manacapuru, Brazil. We use the difference between the level of neutral buoyancy (LNB) and the level of maximum detrainment (LMD) as a proxy for the effective bulk convective entrainment (εproxy). The LNB, the theoretical height that a parcel raised above the level of free convection would reach with no mixing, is calculated based on pre-convection radiosonde measurements using parcel theory. The LMD is the height of the maximum reflectivity observed in forward anvil clouds by profiling radars. Deep convective systems over the TWP show higher LNBs that extend to 16.3 km on average and larger εproxy (median LNB minus LMD up to 6.5 km) compared to their continental counterparts in the Amazon and West Africa. Oceanic conditions show larger convective available potential energy (CAPE) coupled with higher moisture at low levels which favors larger εproxy. In contrast, continental cases initiate and develop under high convective inhibition, steeper environmental lapse rate, and high wind shear conditions, which show smaller offset between LNB and LMD. Deep convective cases that promote significant cold pools at the surface experience less εproxy. Using a Random Forest regression algorithm, CAPE is associated with the highest feature importance score for predicting convective εproxy, followed by low-level relative humidity. For continental cases, the low-level wind shear also indicates higher importance.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Scaling of Turbulence and Microphysics in a Convection–Cloud Chamber of Varying Height

Abstract The convection–cloud chamber enables measurement of aerosol and cloud microphysics, as well as their interactions, within a turbulent environment under steady‐state conditions. Increasing the size of a convection–cloud chamber, while holding the imposed temperature difference constant, leads to increased Rayleigh, Reynolds and Nusselt numbers. Large–eddy simulation coupled with a bin microphysics model allows the influence of increased velocity, time, and spatial scales on cloud microphysical properties to be explored. Simulations of a convection–cloud chamber, with fixed aspect ratio and increasing heights of H = 1, 2, 4, and (for dry conditions only) 8 m are performed. The key findings are: Velocity fluctuations scale as H 1/3 , consistent with the Deardorff expression for convective velocity, and implying that the turbulence correlation time scales as H 2/3 . Temperature and other scalar fluctuations scale as H −3/7 . Droplet size distributions from chambers of different sizes can be matched by adjusting the total aerosol injection rate as the horizontal cross‐sectional area (i.e., as H 2 for constant aspect ratio). Injection of aerosols at a point versus distributed throughout the volume makes no difference for polluted conditions, but can lead to cloud droplet size distribution broadening in clean conditions. Cloud droplet growth by collision and coalescence leads to a broader right tail of the distribution compared to condensation growth alone, and this tail increases in magnitude and extent monotonically as the increase of chamber height. These results also have implications for scaling within turbulent, cloudy mixed‐layers in the atmosphere, such as fog layers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Large‐Eddy Simulations of a Convection Cloud Chamber: Sensitivity to Bin Microphysics and Advection

Abstract Bin microphysics schemes are useful tools for cloud simulations and are often considered to provide a benchmark for model intercomparison. However, they may experience issues with numerical diffusion, which are not well quantified, and the transport of hydrometeors depends on the choice of advection scheme, which can also change cloud simulation results. Here, an atmospheric large‐eddy simulation model is adapted to simulate a statistically steady‐state cloud in a convection cloud chamber under well‐constrained conditions. Two bin microphysics schemes, a spectral bin method and the method of moments, as well as several advection methods for the transport of the microphysical variables are employed for model intercomparison. Results show that different combinations of microphysics and advection schemes can lead to considerable differences in simulated cloud properties, such as cloud droplet number concentration. We find that simulations using the advection scheme that suffers more from numerical diffusion tends to have a smaller droplet number concentration and liquid water content, while simulation with the microphysics scheme that suffers more from numerical diffusion tends to have a broader size distribution and thus larger mean droplet sizes. Sensitivities of simulations to bin resolution, spatial resolution, and temporal resolution are also tested. We find that refining the microphysical bin resolution leads to a broader cloud droplet size distribution due to the advection of hydrometeors. Our results provide insight for using different advection and microphysics schemes in cloud chamber simulations, which might also help understand the uncertainties of the schemes used in atmospheric cloud simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Climate Impacts of Convective Cloud Microphysics in NCAR CAM5

Here we improved the treatments of convective cloud microphysics in the NCAR Community Atmosphere Model version 5.3 (CAM5.3) by 1) implementing new terminal velocity parameterizations for convective ice and snow particles, 2) adding graupel microphysics, 3) considering convective snow detrainment, and 4) enhancing rain initiation and generation rate in warm clouds. Furthermore, we evaluated the impacts of improved microphysics on simulated global climate, focusing on simulated cloud radiative forcing, graupel microphysics, convective cloud ice amount, and tropical precipitation. Compared to CAM5.3 with the default convective microphysics, the too-strong cloud shortwave radiative forcing due primarily to excessive convective cloud liquid is largely alleviated over the tropics and midlatitudes after rain initiation and generation rate is enhanced, in better agreement with the CERES-EBAF estimates. Geographic distributions of graupel occurrence are reasonably simulated over continents; whereas the graupel occurrence remains highly uncertain over the oceanic storm-track regions. When evaluated against the CloudSat–CALIPSO estimates, the overestimation of convective ice mass is alleviated with the improved convective ice microphysics, among which adding graupel microphysics and the accompanying increase in hydrometeor fall speed play the most important role. The probability distribution function (PDF) of rainfall intensity is sensitive to warm rain processes in convective clouds, and enhancement in warm rain production shifts the PDF toward heavier precipitation, which agrees better with the TRMM observations. Common biases of overestimating the light rain frequency and underestimating the heavy rain frequency in GCMs are mitigated.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Updraft Width Modulates Ambient Atmospheric Controls on Convective Cloud Depth

Abstract The depth of convective clouds affects vertical transport of atmospheric constituents, influencing downstream weather and climate. Atmospheric controls on the maximum depth reached by moist convection are investigated with radar‐tracked convective cells tagged with sounding‐derived atmospheric parameters from a field campaign in central Argentina. Regression analyses show that narrow (<12‐km diameter) and wide (>16‐km diameter) cell depths respond to disparate factors, where cell areas are defined using composite reflectivity signatures. Undiluted lifted parcel indices including convective available potential energy (CAPE) and level of neutral buoyancy (LNB) are top predictors of wide cell maximum depth while mid‐tropospheric relative humidity is the top predictor of narrow cell maximum depth. Because narrow cells are more numerous than wide cells, the overall outcome of the full cell population does not strongly correlate with CAPE and LNB conditions. Tracked cells and atmospheric conditions in a simulation with 3‐km grid spacing covering the field campaign produce similar results to those observed. Narrow cells that are relatively deep have a cooler and moister mid‐troposphere with weaker free tropospheric subsidence, while relatively deep wide cells have much warmer and moister lower tropospheric conditions. These atmospheric differences are present 1 hr before cell initiation at both a fixed observing site and variable cell initiation locations. Simulated narrow cell maximum equivalent potential temperature decreases with height at a rate similar to the ambient vertical gradient, causing these cells to fall short of their LNB and supporting the view that entrainment‐driven dilution is a dominant control on their depth.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A semi-Lagrangian method for detecting and tracking deep convective clouds in geostationary satellite observations

Automated methods for the detection and tracking of deep convective clouds in geostationary satellite imagery have a vital role in both the forecasting of severe storms and research into their behaviour. Studying the interactions and feedbacks between multiple deep convective clouds (DCC), however, poses a challenge for existing algorithms due to the necessary compromise between false detection and missed detection errors. We utilise an optical flow method to determine the motion of deep convective clouds in GOES-16 ABI imagery in order to construct a semi-Lagrangian framework for the motion of the cloud field, independently of the detection and tracking of cloud objects. The semi-Lagrangian framework allows severe storms to be simultaneously detected and tracked in both spatial and temporal dimensions. For the purpose of this framework we have developed a novel Lagrangian convolution method and a number of novel implementations of morphological image operations that account for the motion of observed objects. These novel methods allow the accurate extension of computer vision techniques to the temporal domain for moving objects such as DCCs. By combining this framework with existing methods for detecting DCCs (including detection of growing cores through cloud top cooling and detection of anvil clouds using brightness temperature), we show that the novel framework enables reductions in errors due to both false and missed detections compared to any of the individual methods, reducing the need to compromise when compared with existing frameworks. The novel framework enables the continuous tracking of anvil clouds associated with detected deep convection after convective activity has stopped, enabling the study of the entire life cycle of DCCs and their associated anvils. Furthermore, we expect this framework to be applicable to a wide range of cases including the detection and tracking of low-level clouds and other atmospheric phenomena. In addition, this framework may be used to combine observations from multiple sources, including satellite observations, weather radar and reanalysis model data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Evaluating Sea Breezes and Associated Convective Cloud Evolution in the Model Gray Zone

We characterize convective clouds associated with sea‐breeze circulations (SBC) using multi‐agency observations and multi‐case ensemble model simulations. The focus is on assessing convective cloud lifecycle properties and their merging behavior, as well as the environmental conditions they are embedded in, particularly SBC features. In total, 46 SBC days over the Houston‐Galveston region are selected and simulated using the Weather Research and Forecasting (WRF) model at a gray zone scale with a forecast‐like parameterization setup. Advanced techniques, including change‐point detection, a Lagrangian cloud tracking method, and a newly developed cell merging and splitting detection algorithm, are applied and/or developed for this study. Our findings indicate that the WRF model at 1 km grid spacing well represents the thermodynamic conditions over the region, as well as SBC timing and intensity. However, for the associated convective cells, WRF overestimates the 30‐dBZ echo top height, cell area, and maximum radar reflectivity compared to radar observations. This overestimation is potentially due to under‐resolved entrainment processes, an overestimated merging frequency, and the overestimation of updraft intensity. Furthermore, the model exhibits a deficiency in simulating congestus clouds, showing a more rapid transition from shallow to deep convection compared to observed behavior. Moreover, observations indicate stronger, deeper, and wider clouds when merging happens. Conversely, in simulations, the merging process does not necessarily lead to higher or longer‐lived cells, as many cases experience rapid and frequent merging and splitting which may result in more variance in convective updraft velocity during the convection lifetime.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Enhancing Turbulent Mixing and Microphysical Uniformity in a Tall Convection‐Cloud Chamber Through Idealized Heterogeneity of Boundaries

A large convection cloud chamber has been proposed for exploring aerosol–cloud–drizzle interactions under well‐controlled turbulent conditions. Recent theoretical and numerical studies suggest that a convection cloud chamber with two heated and two cooled sidewalls can significantly enhance the liquid water content and thus benefit drizzle initiation. However, a chamber with such a sidewall configuration develops stable stratification and extremely weak turbulence therein. In this study, we conduct large‐eddy simulations of a tall convection chamber with five different sidewall configurations consisting of alternating warm and cold patches. For each configuration, the total surface area of warm patches equals that of cold patches, resulting in the same expected cloud‐free supersaturation based on a flux budget model. Results show that changing the sidewall configuration, while keeping all other factors constant, can substantially enhance turbulent mixing and improve the uniformity of thermodynamic and cloud microphysical properties in the bulk region of the chamber. In addition, turbulence strength is positively correlated with liquid water content and negatively correlated with cloud droplet number concentration, consistent with theoretical predictions. Our results highlight the advantage of building a large cloud chamber using modular patches with individually controllable temperature and humidity to achieve well‐mixed conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Impacts of long-range-transported mineral dust on summertime convective cloud and precipitation: a case study over the Taiwan region

As one of the most abundant atmospheric aerosols and effective ice nuclei, mineral dust affects clouds and precipitation in the Earth system. Here numerical experiments are carried out to investigate the impacts of dust aerosols on summertime convective clouds and precipitation over the mountainous region of Taiwan by acting as ice-nucleating particles. We run the Weather Research and Forecasting model (WRF) with the Morrison two-moment and spectral-bin microphysics (SBM) schemes at 3 km resolution, using dust number concentrations from a global chemical transport model (GEOS-Chem-APM). The case study indicates that the long-range-transported mineral dust, with relatively low number concentrations, can notably affect the properties of convective clouds (ice and liquid water contents, cloud top height, and cloud coverage) and precipitation (spatial pattern and intensity). The effects of dust are evident during strong convective periods, with significantly increased ice water contents in the mixed-phase regime via the enhanced heterogeneous freezing. With both the Morrison and SBM schemes, we see the invigoration effects of dust aerosols on the convective intensity through enhanced condensation and deposition latent heating. The low-altitude dust particles are uplifted to the freezing level by updrafts, which, in turn, enhance the convective cloud development through immersion freezing and convective invigoration. Compared to the Morrison scheme, the SBM scheme predicts more realistic precipitation and different invigoration effects of dust. The differences are partially attributed to the saturation adjustment approach utilized in the bulk scheme, which leads to a stronger enhancement of condensation at midlatitudes to low altitudes and a weaker deposition increase at the upper level.

54 ENVIRONMENTAL SCIENCES↗