Search NASA⌕ Search

SEARCH · Search NASA

Results for “core modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Mobilities of polyatomic ions in gases - Core model.

A core model, consisting of a (12-4) central potential displaced from the origin, is suggested as a representation of the interaction of polyatomic ions with neutral molecules. The diffusion collision integral, which describes ion mobility, is computed and tabulated as a function of temperature and core size. The addition of the core reduces the maximum in the mobility against temperature curve, and eventually reduces the mobility below its polarization limit at all temperatures. These results are in accord with limited available experimental data. Comparison is made with other models of ion-neutral interactions.

Mason, E. A.↗
NASA NTRS1983

Performance measurements of a pilot superconducting solenoid model core for a wind tunnel magnetic suspension and balance system

The results of experimental demonstrations of a superconducting solenoid model core in the Southampton University Magnetic Suspension and Balance System are detailed. Technology and techniques relevant to large-scale wind tunnel MSBSs comprise the long term goals. The magnetic moment of solenoids, difficulties peculiar to superconducting solenoid cores, lift force and pitching moment, dynamic lift calibration, and helium boil-off measurements are discussed.

Goodyer, M. J.↗
NASA NTRS1985

Effect of superconducting solenoid model cores on spanwise iron magnet roll control

Compared with conventional ferromagnetic fuselage cores, superconducting solenoid cores appear to offer significant reductions in the projected cost of a large wind tunnel magnetic suspension and balance system. The provision of sufficient magnetic roll torque capability has been a long-standing problem with all magnetic suspension and balance systems; and the spanwise iron magnet scheme appears to be the most powerful system available. This scheme utilizes iron cores which are installed in the wings of the model. It was anticipated that the magnetization of these cores, and hence the roll torque generated, would be affected by the powerful external magnetic field of the superconducting solenoid. A preliminary study has been made of the effect of the superconducting solenoid fuselage model core concept on the spanwise iron magnet roll torque generation schemes. Computed data for one representative configuration indicate that reductions in available roll torque occur over a range of applied magnetic field levels. These results indicate that a 30-percent increase in roll electromagnet capacity over that previously determined will be required for a representative 8-foot wind tunnel magnetic suspension and balance system design.

Britcher, C. P.↗
NASA NTRS1982

VORCOR: A computer program for calculating characteristics of wings with edge vortex separation by using a vortex-filament and-core model

A computer code base on an improved vortex filament/vortex core method for predicting aerodynamic characteristics of slender wings with edge vortex separations is developed. The code is applicable to camber wings, straked wings or wings with leading edge vortex flaps at subsonic speeds. The prediction of lifting pressure distribution and the computer time are improved by using a pair of concentrated vortex cores above the wing surface. The main features of this computer program are: (1) arbitrary camber shape may be defined and an option for exactly defining leading edge flap geometry is also provided; (2) the side edge vortex system is incorporated.

Pao, J. L.↗
NASA NTRS1982

A vortex-filament and core model for wings with edge vortex separation

A vortex filament-vortex core method for predicting aerodynamic characteristics of slender wings with edge vortex separation was developed. Semi-empirical but simple methods were used to determine the initial positions of the free sheet and vortex core. Comparison with available data indicates that: (1) the present method is generally accurate in predicting the lift and induced drag coefficients but the predicted pitching moment is too positive; (2) the spanwise lifting pressure distributions estimated by the one vortex core solution of the present method are significantly better than the results of Mehrotra's method relative to the pressure peak values for the flat delta; (3) the two vortex core system applied to the double delta and strake wings produce overall aerodynamic characteristics which have good agreement with data except for the pitching moment; and (4) the computer time for the present method is about two thirds of that of Mehrotra's method.

Pao, J. L.↗
NASA NTRS1981

A vortex-filament and core model for wings with edge vortex separation

A method for predicting aerodynamic characteristics of slender wings with edge vortex separation was developed. Semiempirical but simple methods were used to determine the initial positions of the free sheet and vortex core. Comparison with available data indicates that: the present method is generally accurate in predicting the lift and induced drag coefficients but the predicted pitching moment is too positive; the spanwise lifting pressure distributions estimated by the one vortex core solution of the present method are significantly better than the results of Mehrotra's method relative to the pressure peak values for the flat delta; the two vortex core system applied to the double delta and strake wing produce overall aerodynamic characteristics which have good agreement with data except for the pitching moment; and the computer time for the present method is about two thirds of that of Mehrotra's method.

Pao, J. L.↗
NASA NTRS1984

A method for modeling finite-core vortices in wake-flow calculations

A numerical method for computing nonplanar vortex wakes represented by finite-core vortices is presented. The approach solves for the velocity on an Eulerian grid, using standard finite-difference techniques; the vortex wake is tracked by Lagrangian methods. In this method, the distribution of continuous vorticity in the wake is replaced by a group of discrete vortices. An axially symmetric distribution of vorticity about the center of each discrete vortex is used to represent the finite-core model. Two distributions of vorticity, or core models, are investigated: a finite distribution of vorticity represented by a third-order polynomial, and a continuous distribution of vorticity throughout the wake. The method provides for a vortex-core model that is insensitive to the mesh spacing. Results for a simplified case are presented. Computed results for the roll-up of a vortex wake generated by wings with different spanwise load distributions are presented; contour plots of the flow-field velocities are included; and comparisons are made of the computed flow-field velocities with experimentally measured velocities.

Stremel, P. M.↗
NASA NTRS1982

Modelling the core magnetic field of the earth

It is suggested that radial off-center dipoles located within the core of the earth be used instead of spherical harmonics of the magnetic potential in modeling the core magnetic field. The off-center dipoles, in addition to more realistically modeling the physical current systems within the core, are if located deep within the core more effective at removing long wavelength signals of either potential or field. Their disadvantage is that their positions and strengths are more difficult to compute, and such effects as upward and downward continuation are more difficult to manipulate. It is nevertheless agreed with Cox (1975) and Alldredge and Hurwitz (1964) that physical realism in models is more important than mathematical convenience. A radial dipole model is presented which agrees with observations of secular variation and excursions.

Harrison, C. G. A.↗
NASA NTRS1973

Predictions of axisymmetric free turbulent shear flows using a generalized eddy-viscosity approach

The generalized eddy viscosity approach is described and results are presented of test cases which show that predictions obtained by this approach are adequate for most engineering applications. Because of the importance of starting computations from the injection station where experimentally determined mean and turbulence parameters are rarely available, a very simple core model applicable to simple step-type (slug) profiles was developed. Agreement between predicted and experimental mean profiles was generally almost as good for calculations made by using this model throughout the core region and the transition model for all subsequent regions as predictions made by starting from experimental profiles in the transition region. The generalized eddy-viscosity model, which was developed in part through correlation of turbulence parameters, successfully predicted turbulent shear stress, turbulent intensity, and mean velocity profiles for a 0.040-inch-diameter microjet. Therefore, successful scaling by the model was demonstrated since data used in its development was for jet areas up to 90,000 times as large as the microjet and velocities only 1/20th as high.

Morgenthaler, J. H.↗
NASA NTRS1974

Envelope dynamics of iron-core supernova models

Wilson (1971) has found that the neutrino transport mechanism is unable to generate a supernova explosion in stars with collapsing iron cores. The present work uses Wilson's analysis to investigate the behavior of the overlying potentially explosive layers which Wilson omitted. The outer boundary of the core of Wilson's models moves in such a manner as to deliver a shock to the base of the envelope. We have numerically followed the progress of such shocks into the envelope of a realistic model obtained from evolutionary calculations. We find that only shocks so strong as to be inconsistent with our treatment are capable of ejecting material. For reasonable shocks the nuclear burning does not proceed rapidly at densities below 1,000 kg/cu cm, and the nuclear energy released is less than the shock energy in all models that come near to ejecting matter.

Barkat, Z.↗
NASA NTRS1981

Density of the mantle of Mars

The range of zero pressure densities of the Martian mantle which are compatible with the mean density and moment of inertia factor of Mars has been explored by: (1) considering the full range of plausible core compositions and densities, and (2) investigating the sensitivity of computed mantle densities to uncertainties in the input parameters. Ni, Fe, Fe3O4, and FeS cores were considered; corresponding zero pressure mantle densities range from 3.47 to 3.41 g/cu cm. Uncertainty in the mantle density of about 0.04 g/cu cm for the Fe core model and about 0.05 g/cu cm for the FeS core model results from uncertainties in the input parameters. The zero pressure density of the Martian mantle is estimated to be 3.44 plus or minus 0.06 g/cu cm.

Goettel, K. A.↗
NASA NTRS1972

Moon model - An offset core.

The lunar model proposed helps to account for the offset of the center of gravity from the center of the optical figure, the moments of inertia of the Moon, the 'mascons,' the localization of the maria basins on the near side of the Moon, the igneous nature of rocks, and the remanent magnetism. In the proposed model the Moon has a core whose center is offset from the center of the outside spheroid towards the earth. Such a core will be formed if the Moon were entirely molten at some time in its past, and on solidification was synchronous with the earth.

Ransford, G.↗
NASA NTRS1980

Electromagnet configurations for extreme attitude testing in magnetic suspension and balance systems

The inclusion of adequate versatility into the electromagnet array configuration requires sizing the electromagnets to satisfy particular absolute force and moment requirements. Magnetic performance of a permanent magnet model core, air cored electromagnet may easily and reliably be computed by using the FORCE program which calculates model forces and moments via representations of the model as an assembly of dipoles and the electromagnets as an assembly of line currents. Some aspects of the performance of an ellipsoidal iron cored model may be inferred from the above under certain circumstances.

Britcher, C. P.↗
NASA NTRS1977

Monochromatic brightness variations of comets. II - Core-mantle model

A class of comets, of which Comet Kohoutek (1973f) is typical, show total as well as monochromatic brightness asymmetries about perihelion. They are fainter after perihelion than before at the same heliocentric distance. A model of the cometary nucleus consisting of a growing nonvolatile dust mantle surrounding a volatile icy core is used to discuss this phenomenon. Numerical results are obtained for Comet Kohoutek (1973f). It is found that dust mantles of thickness in the range of 10-75 cm can be grown by perihelion passage for various values of the thermal conductivity of the dust if there is no substantial dust blow-off by the sublimating volatiles. The thermal conductivity of the dust mantle is quite small and is dominated by 'radiative conductivity' for heliocentric distances less than about 2 AU. Since the radiative conductivity is larger for larger grain size, the thickest mantle corresponds to coarsest matrix. The production rate of the 'parent-molecules' as well as the monochromatic brightness of their 'daughter' products increases less steeply than in the mantleless case, as the comet approaches perihelion.

Mendis, D. A.↗
NASA NTRS1985

The generation of rolling moments with the superconducting solenoid model

The superconducting solenoid model is a pilot model core for levitation in a wind tunnel magnetic suspension system. This type of core would replace the ferromagnetic core typically installed in the model fuselage. For suspension purposes, the solenoid is operated upon by a set of electromagnets surrounding the wind tunnel which are to support and restrain the model at required positions and orientations under the influence of powerful aerodynamic disturbances. The subject of providing sources of magnets rolling moment for use when spanwise magnets, which can be used for winged models, are not available is covered. Several methods have emerged for generating a rolling moment based on the use of additional superconducting loops or magnetic poles positioned around or within the solenoid. Predictions of the moment capacities of superconducting loops in models sized for a large wind tunnel are presented. An existing prototype superconducting model proved a suitable vehicle for demonstrating and calibrating, at a smaller scale, some of the other roll elements based on magnetic pole devices. Calibration data are included.

Goodyear, M. J.↗