Petrography of Meteor Crater core 4, Meteor Crater, Arizona
Petrography of Meteor Crator, Arizona
METEORITIC CRATER↗
SEARCH · Search NASA
Results for “core petrography”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Composition and grain-size characteristics of fines from the Apollo 12 double-core tube
Petrography, mineral composition and grain size distribution of Apollo 12 lunar fines
Bird, M. L.↗
Initial Petrographic Analysis of Apollo 17 73002 Continuous Core Thin Sections Using QEMSCAN Mapping Techniques
In 1972, the Apollo 17 mission landed in the Taurus-Littrow Valley located in the southeastern edge of Mare Serenitatis [1].During EVA 2at Station 3,a double drive tube was used to collect a sealed core sample (73001/2)of the upper~70cm of the lunar regolith[2-4].The core was taken from the surface of the light mantle deposit, found at the base of the South Massif [3]. For nearly 50 years, the sealed core samples have remained unopened. This study is part of the Apollo Next Generation Sample Analysis (ANGSA) initiative to analyze the continuous thin sections from the Apollo 17 drive tubes opened in 2019[5-7].
QEMSCAN↗
Apollo 17 drive tube 76001 - Modal petrology
Twelve polished thin sections from Apollo 17 drive tube 76001 have been studied by optical petrography. The entire core is found to be mature showing little variation in depth, which is consistent with a depositional model involving slow downslope movement of the regolith by mass wasting. However, within the core some major differences are preserved between two stratigraphic units. Unit A (20-31 cm depth) is enriched in gabbroic anorthosite relative to unit B (0-20 cm depth), while unit B is enriched in KREEPY noritic breccias relative to unit A. This observation is interpreted in terms of a stratigraphy for North Massif involving a noritic breccia unit overlying a unit enriched in gabbroic anorthosite. Pronounced differences between the highland/mare ratios in drive tube 76001 and the Apollo 17 drill core separated by only 3.5 km demonstrate the relative inefficiency of lateral transport as a regolith mixing mechanism on the moon.
Papike, J. J.↗
Petrography of shock features in the 1953 Manson 2-A drill core
Drilling of Nx core in late 1953 into an anomalous zone of disturbed rocks northwest of Manson, Iowa disclosed presence of extensive breccias including crystalline rocks brought to the surface from depths of 4 km or more. Hole 2-A penetrated breccias dominated by leucocratic igneous and metamorphic lithologies, later interpreted to be part of a general ringed peak complex within a 35 km wide impact structure produced about 65 Ma ago. Proof of this origin was given in 1966 by NMS through recognition of shock metamorphic features in 2-A materials during a cursory examination of samples provided by R.A. Hoppin, University of Iowa. A detailed study of this material now underway has revealed that most breccia clasts in 2-A show abundant and varied evidence of shock damage, including extensive planar deformation features (PDF) in quartz, K-feldspar, plagioclase, and a pyroxene and varying degrees of isotropization and incipient melting in feldspars.
Short, N. M.↗
Petrography and preliminary interpretations of the crystalline breccias from the Manson M-1 core
The M-1 core was drilled on the eastern edge of the central uplift within the Manson Impact Structure in Iowa. The lower 107.9 m of the core consists of crystalline breccias. Twelve intervals of thin sections from this core have been studied for preliminary discussion. The breccias are divided into three units by matrix size and abundance. Unit 1 is characterized by a high volume fraction of matrix, and a decreasing proportion of matrix with depth. This matrix is nearly isotropic and consists of grains less than 0.005 to less than 0.02 mm in length. The matrix between 112 and 146 meters depth consists of a crystalline intergrowth of felsic and opaque minerals with or without chlorite. This was the hottest section of the core after impact, and may have undergone high temperature metamorphic recrystallization. Unit 2 is transitional between units 1 and 3, and is delineated by a rapid increase in grain size to .01-.04 mm and a decrease in matrix abundance to 10 percent. Unit 3 has a coarse, often porous matrix, whose abundance changes from about 10 percent at the top to about 2 percent at the base. Grain sizes range from 0.01-0.1 mm over this interval and coarsen with depth. Changes in the character of the matrix as well as the changes in clast lithology and abundance outlined below suggest that unit 3 is in-situ brecciated basement with injected melt and shale fragments; unit 1 is a crater veneer deposit consisting of transported basement materials and unit 2 is a mixed zone between units 1 and 3.
Bell, M. S.↗
The Apollo 17 drill core - Modal petrology and glass chemistry /sections 70007, 70008, 70009/
On the basis of modal petrography the upper, mare basalt-rich portion of the Apollo 17 drill core (sections 70007, 70008, 70009) can be subdivided into three major stratigraphic units. The lower unit (a) falls within 70007, is relatively mature, and contains evidence of an increase in highland component and decrease of mare component within the lower approximately 8 cm. The middle unit (b) is coarse-grained and relatively immature; this unit has the highest concentration of mare basalt lithic and mineral fragments and mare orange/black glasses. The top unit (c) falls within 70009 and is relatively mature. Within these three sections of the drill core, there are compositional clusters of glass beads that correspond to high Ti subfloor basalt (orange/black glass), anorthositic gabbro (clear glass), and a new very low Ti (VLT) mare basalt (yellow/green glass).
Vaniman, D. T.↗
Lunar Science Conference, 7th, Houston, Tex., March 15-19, 1976, Proceedings. Volume 1 - Regolith studies. Volume 2 - Petrogenetic studies of mare and highland rocks. Volume 3 - The moon and other bodies
Attention is given to lunar core studies (multi-core, deep drill, and drive tube), surface soil studies (petrography and geochemistry, light and volatile element studies, and agglutinate related studies), and surfaces process studies. Also considered are mare basalts, with emphasis on mineralogy and petrology, chemical and isotopic studies, and constraints and models of basalt evolution, along with breccia and highland samples with attention given to geochronology, boulders and consortium studies and the formation of highland samples. Remote sensing and photogeology of the moon, crustal bombardment, physical properties of the moon, and comparative planetology are also discussed.
Merrill, R. B.↗
Parental magmas of Mare Fecunditatis - Evidence from pristine glasses
Results are presented on the petrography and electron microprobe analyses of 14 discrete glass beads from the Luna 16 core sample (21036,15) from Mare Fecunditatis regolith, that were previously characterized as representing pristine glasses. Compared to Apollo pristine glasses analyzed by Delano (1986), the Luna 16 pristine glasses have higher CaO and Al2O3 contents but lower MgO and Ni. On the basis of their contents of MgO, FeO, Al2O3, and CaO, these pristine glasses could be divided into two groups, A and B. It is suggested that at least two parental magmas are needed to explain the chemical variations among these glasses. The Group B glasses appear to represent primitive parental magma that evolved by olivine fractionation to the compositions of the Luna 16 aluminous mare basalts, whereas the Group A volcanic glasses may represent an unusual new basalt magma type that contains a high plagioclase component.
Jin, Y.↗
Characteristics of microcracks in samples from the drill hole Noerdlingen 1973 in the Ries crater, Germany
Samples from the Noerdlingen 1973 drill core contain abundant shock-induced microfractures which exhibit varying amounts of healing and sealing. Many of the microcracks resemble morphologically the open microcracks present in returned lunar samples. Data derived from petrography, scanning electron microscopy, and differential strain analysis indicate that fewer microcracks were formed at greater depths and crack sealing processes are more effective for cracks associated with planar elements. Although the microcracks in the Ries core are now sealed, they are valid analogues of the open shock-induced cracks of lunar rocks and demonstrate that open cracks do form in rocks at depth during a naturally-occurring shock event. The healing of the shock-induced cracks in the Ries core also precludes their use for laboratory measurements of physical properties intended to be used as analogue measurements of lunar samples in situ.
Padovani, E. R.↗
Apollo 16 core 60013/14 as a product of path 1 and path 2 regolith evolution processes
We have made a petrographic study of 12 samples along the 62 cm profile of Apollo 16 core 60013/14 taken at Station 10 near the lunar module. The basic core description and maturity variations have been discussed earlier. This core is important because it enables a stratigraphic comparison with nearby cores 60001-7 and 60009/10. These cores form a triangle with sides 35-40 m. FMR data show a maturity-match between 60009/10 and 60013/14. Unfortunately, segments of the core 60001-7 are too disturbed for any cm scale comparison. We present new data on the grain size distribution and the modal petrography for six samples from six levels of 60013 using the same approach and rationale used for 60014. We have combined the new data with our previous data on 60014 to plot the variations of grain size distributions and grain type abundances, in the 500-1000 m and 90-150 micrometers size fractions, with depth. Agglutinate abundances match the I sub s/FeO profile and both show a significant break at a depth of about 45 cm, with lower maturity material below that point. Grain size distributions show that for all analyzed samples, the mean grain size is below 90 micrometers. The two lowest samples are somewhat more coarse-grained than the rest of the core. The break at about 45 cm is the most prominent feature of the core and was described during the initial dissection as a pronounced change in color from dark to light. It now seems clear that this break is primarily one of maturity rather than of bulk chemical composition.
Basu, A.↗
Constraints on the Parental Melts of Enriched Shergottites from Image Analysis and High Pressure Experiments
Martian basalts can be classified in at least two geochemically different families: enriched and depleted shergottites. Enriched shergottites are characterized by higher incompatible element concentrations and initial Sr-87/Sr-86 and lower initial Nd-143/Nd-144 and Hf-176/Hf-177 than depleted shergottites [e.g. 1, 2]. It is now generally admitted that shergottites result from the melting of at least two distinct mantle reservoirs [e.g. 2, 3]. Some of the olivine-phyric shergottites (either depleted or enriched), the most magnesian Martian basalts, could represent primitive melts, which are of considerable interest to constrain mantle sources. Two depleted olivine-phyric shergottites, Yamato (Y) 980459 and Northwest Africa (NWA) 5789, are in equilibrium with their most magnesian olivine (Fig. 1) and their bulk rock compositions are inferred to represent primitive melts [4, 5]. Larkman Nunatak (LAR) 06319 [3, 6, 7] and NWA 1068 [8], the most magnesian enriched basalts, have bulk Mg# that are too high to be in equilibrium with their olivine megacryst cores. Parental melt compositions have been estimated by subtracting the most magnesian olivine from the bulk rock composition, assuming that olivine megacrysts have partially accumulated [3, 9]. However, because this technique does not account for the actual petrography of these meteorites, we used image analysis to study these rocks history, reconstruct their parent magma and understand the nature of olivine megacrysts.
Collinet, M.↗
Composition of Apollo 17 core 76001
Core 76001 is a single drive tube containing a column of regolith taken at the base of the North Massif, station 6, Apollo 17. The core material is believed to have accumulated through slow downslope mass wasting from the massif. As a consequence, the core soil is mature throughout its length. Results of INAA for samples taken every half centimeter along the length of the core indicate that there is only minor systematic compositional variation with depth. Concentrations of elements primarily associated with mare basalt (Sc, Fe) and noritic impact melt breccia (Sm) decrease slightly with depth, particularly between 20 cm and the bottom of the core at 32 cm depth. This is consistent with petrographic studies that indicate a greater proportion of basalt and melt breccia in the top part of the core. However, Sm/Sc and La/Sm ratios are remarkably constant with depth, indicating no variation in the ratio of mare material to Sm-rich highlands material with depth. Other than these subtle changes, there is no compositional evidence for the two stratigraphic units (0-20 cm and 20-32 cm) defined on the basis of modal petrography, although all samples with anomalously high Ni concentrations (Fe-Ni metal nuggets) occur above 20 cm depth.
Korotev, Randy L.↗
Complex petrogenesis of the Nakhla (SNC) meteorite - Evidence from petrography and mineral chemistry
The Nakhla (SNC) meteorite, of putative Martian origin, consists of euhedra and subhedra of augite and olivine in a fine-grained basaltic mesostasis. This paper presents petrographic and mineral chemical data on the Nakhla meteorite, which were collected to help distinquish among the four existing hypotheses for the formation of olivine in this meteorite. It is concluded that none of these hypotheses can explain the origins of olivine and augite. A new hypothesis is proposed, which is consistent with the data presented. It suggests that the cores of augites and olivines are both xenocrysts from a partially equilibrated source rock.
Treiman, A. H.↗
Lunar and Planetary Science XXXVI, Part 22
The Lunar and Planetary Science XXXVI, Part 22 is presented. The topics include: 1) Pressure Histories from Thin and Thick Shock-induced Melt Veins in Meteorites; 2) Nano-structured Minerals as Signature of Microbial Activity; 3) The Insoluble Carbonaceous Material of CM Chondrites as Possible Source of Discrete Organics During the Asteroidal Aqueous Phase; 4) Discovery of Abundant Presolar Silicates in Subgroups of Antarctic Micrometeorites; 5) Characteristics of a Seismometer for the LUNAR-A Penetrator; 6) Heating Experiments of the HaH 262 Eucrite and Implication for the Metamorphic History of Highly Metamorphosed Eucrites; 7) Measurements of Ejecta Velocity Distribution by a High-Speed Video Camera; 8) Petrological Comparison of Mongolian Jalanash Ureilite and Twelve Antarctic Ureilites; 9) Metallographic Cooling Rate of IVA Irons Revisited; 10) Inhomogeneous Temperature Distribution in Chondrules in Shock-Wave Heating Model; 11) Subsurface Weathering of Rocks and Soils at Gusev Crater; 12) Extinct Radioactivities in the Early Solar System and the Mean Age of the Galaxy; 13) Correlation of Rock Spectra with Quantitative Morphologic Indices: Evidence for a Single Rock Type at the Mars Pathfinder Landing Site; 14) Silicon Isotopic Ratios of Presolar Grains from Supernovae; 15) Current Status and Readiness on In-Situ Exploration of Asteroid Surface by MINERVA Rover in Hayabusa Mission; 16) Long Formation Period of Single CAI: Combination of O and Mg Isotope Distribution; 17) Supra-Canonical Initial 26Al/27Al Indicate a 105 Year Residence Time for CAIs in the Solar Proto-Planetary Disk; 18) Evolution of Mercury's Obliquity; 19) First Results from the Huygens Surface Science Package; 20) Polyhedral Serpentine Grains in CM Chondrites; 21) Mountainous Units in the Martian Gusev Highland Region: Volcanic, Tectonic, or Impact Related? 22) Petrography of Lunar Meteorite MET 01210, A New Basaltic Regolith Breccia; 23) Earth-Moon Impacts at ~300 Ma and ~500 Ma Ago; 24) Chemical and Isotopic Analyses of Apollo 16 Glasses: An Integrated Approach; 25) Measuring the Surfaces on Mars; 26) Melting in Martian Snowbanks; 27) The Effect of Ni on Fe-FeS Phase Relations: Implications for the Chemistry of the Martian Core; 28) Shorelines in the Western United States as Analogs for Hypothesized Shoreline Features on Mars; 29) Al and Ti Isotopic Ratios of Presolar SiC Grains of Type Z; 30) Physicochemical Conditions of Clinopyroxene Crystallization in the Parental Bodies of Ordinary Chondrites; 31) Metamorphosed CM and CI Carbonaceous Chondrites Could be from the Breakup of the Same Earth-crossing Asteroid; 32) Aqueous Alteration and Hydrogen Generation on Parent Bodies of Unequilibrated Ordinary Chondrites: Thermodynamic Modeling for the Semarkona Composition; and 33) Preliminary Analysis of Relative Abundances of Hydrothermal Alteration Products in the C1-N10, Y6-N19, and Yax-1_863.51 Impact Melt Samples, Chicxulub Structure, Mexico
Source record↗
Tin-Essako 001: A Metal-Rich Ureilite?
Introduction: Metal-rich achondrites include a variety of types, and likely have a variety of origins. Models range from gravitational mixing at the core-mantle boundaries of differentatiated asteroids, to complex impact mixing scenarios. We describe a new type of metal-rich achondrite that might be the first metal-rich ureilite. Sample: Tin-Essako (TE) 001 (~4.3 g) was found in Mali in 2020 and purchased by Jay Piatek in 2021. It was classified as a metal-rich ungrouped achondrite, with olivine and oxygen isotope (d18O=8.2810‰, d17O=3.718‰, avg. 3) compositions suggesting affinity to ureilites [1]. We studied one polished section (~187.7 mm2) of TE 001. Petrography: TE 001 consists of ~60% metal and 40% silicates, heterogeneously distributed. The metal is largely fresh, but iron oxides (presumably terrestrial) occur along one edge and in some patches and veins in the interior. The silicates are dominantly olivine (≥90%), with melt-textured areas of plagioclase + Si-rich glass. Minor phases include chromite and carbon. Olivine occurs as rounded grains (up to ~2.5 mm) in metal, commonly with rims of melt-textured plagioclase + glass. Olivine also occurs in more massive areas having a “honeycomb” texture, with rounded olivine “cells” surrounded by an interstitial network of reduced olivine riddled with tiny metal grains, plus melt-textured plagioclase + Si-rich glass. Chromite occurs as subhedral to rounded grains; smaller grains (30-250 mm) are included in olivine and a few larger grains (400-500 mm) are isolated within metal. A carbon phase occurs as lacy-textured rims around olivine grains in metal, or small patches within metal. Mineral Compositions: The olivine (excluding interstitial areas) is Fo 73.9±0.5, with 0.25±0.02 wt.% CaO, 0.31±0.01 wt% Cr2O3, 0.01 wt.% NiO, and molar Fe/Mn=49.8±2.2 (53 analyses). Olivine in interstitial areas has Fo up to at least 91. Smaller chromite grains have Fe# (molar Fe/[Fe+Mg]) = 0.54±0.01, Cr# (molar Cr/[Cr+Al]) = 0.52±0.01, 0.52±0.02 wt.% V2O3 and 0.21±0.04 wt% ZnO (28 analyses). One larger grain is zoned from Fe# = 0.45, Cr# =0.52 to Fe# = 0.40, Cr# =0.57, and contains thin Al-rich lamellae not resolved by EMPA. One irregularly shaped patch of chromite included in olivine has Fe# =0.26 and contains no ZnO. Plagioclase laths are An ~53-60, with ≤0.01 wt.% K2O. Glass contains 75-76 wt% SiO2 and ~16 wt% Al2O3. The metal contains 5.2±0.2 wt% Ni, 0.46±0.02 wt.% Co, and 0.01±0.01 wt.% Cr, with Si and P below detection (168 analyses). Discussion: The olivine + chromite assemblage in TE 001 is similar to the most ferroan ureilites (Fo ~75-79 [2]), as are the oxygen isotopes [1]. The presence of a carbon phase supports this, although the identity of this phase (graphite as in ureilites?) remains to be determined. The “honeycomb” textured areas, in particular, the presence of olivine “reduction rims,” resemble shock-smelted olivine areas in ureilites [3], but interstitial melt-textured plagioclase laths + glass like those in TE 001 have not been reported in such (or any) ureilites. Olivine in TE 001 is marginally more ferroan than in the most FeO-rich ureilite, with Fe-Mg-Mn composition offset from the trend of olivine + low-Ca pyroxene ureilites similar to augite-bearing ureilites [4]. CaO and Cr2O3 contents are in the range of those in ureilite olivine [ ] , though Cr2O3 is at the extreme low end of the range [5]. Chromites (except the unusual one) have similar Fe# to the most ferroan primary chromites in ureilites [2], but distinctly lower Cr# (0.52 vs. 0.71). Metal compositions are with the range for metal in ureilites [7]. The absence of pyroxene and sulfide, and the high abundance of metal in TE 001, are unlike ureilites. One possibility is that a ferroan, chromite-bearing, pyroxene-poor ureilite was invaded (possibly due to impact) by a metallic liquid (low S content suggests very high temperature), resulting in complete melting of pyroxene and smelting of olivine, with rapid recrystallization of melted silicate as plagioclase + glass. Alternatively, a pre-existing metal-rich ureilite assemblage may have been impact melted. Additional types of data will be obtained to evaluate these hypotheses (i.e., is the metal indigenous?) and assess affinity to ureilites.
olivine↗
Meteoritic basalts
The objectives were to: explain the abundances of siderophile elements in the SNC meteorite suite, of putative Martian origin; discover the magmatic origins and possibly magma compositions behind the Nakhla meteorite, one of the SNC meteorites; and a re-evaluation of the petrology of Angra dos Reis, a unique meteorite linked to the earliest planetary bodies of the solar nebula. A re-evaluation of its petrography showed that the accepted scenario for its origin, as a cumulate igneous rock, was not consistent with the meteorite's textures (Treiman). More likely is that the meteorite represents a prophyritic igneous rock, originally with magma dominant. Studies of the Nakhla meteorite, of possible Martian origin, although difficult, were successful. It became necessary to reject the basic categorization of Nakhla: that is was a cumulate igneous rock. Detailed studies of the chemical zoning of Nakhlas' minerals, coupled with the failure of experimental studies to yield expected results, forced the conclusion that Nakhla is not a cumulate rock in the usual sense: a rock composed of igneous crystals and intercrystal magma. Study of the siderophile element abundances in the SNC meteorite groups involved trying to find reasonable core formation processes and parameters that would reproduce the observed abundances. Modelling was successful, and delimited a range of models which overlap with those reasonable from geophysical constraints.
Treiman, Allan H.↗
Lunar Meteorites and Implications for Compositional Remote Sensing of the Lunar Surface
Lunar meteorites (LMs) are rocks found on Earth that were ejected from the Moon by impact of an asteroidal meteoroid. Three factors make the LMs important to remote-sensing studies: (1) Most are breccias composed of regolith or fragmental material; (2) all are rocks that resided (or breccias composed of material that resided) in the upper few meters of the Moon prior to launch and (3) most apparently come from areas distant from the Apollo sites. How Many Lunar Locations? At this writing (June 1999), there are 18 known lunar meteorite specimens. When unambiguous cases of terrestrial pairing are considered, the number of actual LMs reduces to 13. (Terrestrial pairing is when a single piece of lunar rock entered Earth's atmosphere, but multiple fragments were produced because the meteoroid broke apart on entry, upon hitting the ground or ice, or while being transported through the ice.) We have no reason to believe that LMs preferentially derive from any specific region(s) of the Moon; i.e., we believe that they are samples from random locations. However, we do not know how many different locations are represented by the LMs; mathematically, it could be as few as 1 or as many as 13. The actual maximum is < 13 because in some cases a single impact appears to have yielded more than one LM. Yamato 793169 and Asuka 881757 are considered "source-crater paired" or "launch paired" because they are compositionally and petrographically similar to each other and distinct from the others, and both have similar cosmic-ray exposure (CRE) histories. The same can be said of QUE 94281 and Y 793274. Thus the 13 meteorites probably represent a maximum of 11 locations on the Moon. The minimum number of likely source craters is debated and in flux as new data for different isotopic systems are obtained. Conservatively, considering CRE data only, a minimum of about 5 impacts is required. Compositional and petrographic data offer only probabilistic constraints. An extreme, but not unreasonable viewpoint, is that such data offer no constraint. For example, if one were to cut up the Apollo 17 landing site (which was selected for its diversity) into softball-sized pieces, some of those pieces (e.g., sample 70135) would be crystalline mare basalts like Y 793169 whereas others (e.g., sample 73131 would be feldspathic regolith breccias like MAC 88104/ 88105. However, nature is not so devious. Warren argues that LMs come from craters of only a few kilometers in diameter. If so, even though CRE data allow, for example, that ALHA 81005 and Y 791197) were launched simultaneously from the same crater, the probability is nevertheless low because the two meteorites are compositionally and mineralogically distinct. Thus, within the allowed range (5-11) for the number of locations represented by the LMs, values at the high end of the range are probably more likely. Mare Meteorites: Three LMs consist almost entirely of mare basalt. Two, Y 793169 and Asuka 881757, are unbrecciated, low-Ti, crystalline rocks that are compositionally and mineralogically similar (but not identical) to each other; they probably derive from a single lunar-mare location. The third, EET 87521/96008, is a fragmental breccia consisting predominantly of VLT mare basalt. Thus, these LMs probably represent only two lunar mare locations. The basaltic LMs have mineral and bulk compositions distinct from Apollo mare basalts. The petrography of Calcalong Creek has not been described in detail, but compositionally it is unique in that it corresponds to a mixture (breccia) of about one-half feldspathic material (i.e., the mean composition of the feldspathic lunar meteorites, below), one-fourth KREEP norite, one-fourth VLT mare basalt (like EET 87521), and 1% CI chondrite. With 4 micro g/g Th and correspondingly high concentrations of other incompatible elements, it is the only lunar meteorite that is likely to have come from within the Procellarum KREEP Terrane (PKT). Yamato 793274 and QUE 94281 are together distinct in being fragmental breccias containing subequal parts of feldspathic highland material and VLT mare basalt. Jolliff et al. estimate a mare to highland ratio of 54:46 for QUE 94281 and 62:38 for Y 793274; this difference is well within the range observed for soils collected only centimeters apart (in cores) at interface site like Apollo 15 and 17 [11]. Although the two meteorites were found on opposite sides of Antarctica, they are probably launch-paired. The strongest evidence is that the pyroclastic glass spherules that occur in both are of two compositional groups and the two groups are essentially the same in both meteorites. Yamato 791197 is nominally a feldspathic lunar meteorite (below), but among FLMs, it probably contains the highest abundance of clasts and glasses of mare derivation. As a consequence, its composition is at the high-Fe, low-Mg end of the range for FLMs and is not included in the FLM average of Table 1. Its composition is consistent with about 10% mare-derived material. Similarly, the two small (Y 82) pieces of Y 82192/82193186032 are more mafic than the large (Y 86) piece, probably as a result of about 7% mare-derived material. All Apollo missions went to areas in or near the PKT, and, consequently, all Apollo regolith samples are contaminated with Th-rich material from the PKT. At the nominally "typical" highland site, Apollo 16, about 30% of the regolith (<1-mm fines) is Th-rich ejecta from the Imbrium impact and about 6% is mare material probably derived from mare basins. Thus Apollo 16 regolith is not typical of the highlands. Among Apollo rocks, the compositions of the FLMs correspond most closely to the feldspathic granulitic breccias of Apollo 16 and 17. (Additional information is contained in original)
Korotev, R. L.↗