Exploration of reduced graphene oxide microparticles as electrocatalytic materials in vanadium redox flow batteries
Explore the source record for details and available documents.
Alazmi, Amira↗
SEARCH · Search NASA
Results for “critical point drying”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Synthesis and characterization of UiO-66-NH 2 incorporated graphene aerogel composites and their utilization for absorption of organic liquids
This work details the synthesis, materials characterization and absorption capacity of graphene aerogel (GA) loaded with UiO-66-NH 2 metal organic framework (MOF). Throughout the study, a series of density-tunable MOF/GA composites were synthesized by adjusting the MOF/graphene oxide (GO) mass ratio of the precursors before hydrothermal reduction and subsequent critical point drying to achieve MOF-x%/GA composites, with x, ranging from 0 to 100, denoting the weight percent ratio of MOF to GO in the starting solution. Scanning electron microscopy (SEM) images and Barrett-Joyner-Halenda (BJH) pore size calculations supported that MOF loading enlarged the macroporous (>50 nm) structure of the GA framework but had no influence on the mesoporous (2–50 nm) structure of GA. The degree of MOF loading first decreased and then increased the density of resulting composites, exhibiting a minimum for the 10–30% samples. Such behavior with respect to MOF loading has not been reported previously. MOF-x%/GA samples were further investigated for absorption capacity using various organic liquids. MOF-30%/GA proved to be the best absorbent sample for all solvents tested, achieving the highest capacity for chloroform at 147.0 ± 10.0 mg/mg. The behavior is attributed to the structural changes induced by the MOF incorporation as well as the interactions between the organic molecules and the MOF.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Development of Ternary Transition Metal Oxide Catalysts for Oxygen Evolution Reaction
Electrochemical water splitting, a promising method for green hydrogen production, is currently hindered by the high cost of precious-group metal (PGM)-based catalysts for the oxygen evolution reaction (OER). This study addresses this challenge by advancing the development of catalysts for OER, focusing on the development of high-performance PGM-free catalysts using nickel-iron-cobalt (NiFeCo)-based aerogels. The catalysts were synthesized via a sol-gel method and critical point drying to achieve a highly porous structure with an exceptionally high surface area. The designed catalyst structure provides an ideal platform for maximizing catalytic active sites and enhancing mass transport kinetics. Co has been systematically incorporated into the current PGM-free state-of-the-art, NiFeOx catalyst, and the metal ratios have been optimized. In addition to the experimental studies, density functional theory calculations were performed to study the material’s properties of this ternary catalyst and the effect of Co addition on enhancing OER catalysis.
Mizrahi, Michal [Bar-Ilan University, Ramat Gan, I↗
Improved Manufacturability and Throughput of Ultra- Transparent, Super-Insulating Aerogels
AeroShield Materials produces a novel silica aerogel material with exemplary thermal performance and unprecedented optical clarity, offering the potential for super-insulating fenestration and insulated glass to reduce thermal losses in the built environment by billions of dollars every year. One of the most significant challenges facing AeroShield today is the total amount of time that is required to produce large monolithic aerogel samples. This overall process can require as much as 144 hours total, which can significantly hinder scale-up to an economically viable product. The purpose of this Phase 1 research was to continue development of our novel aerogel manufacturing process to reduce material processing time by up to 10x, greatly improving product throughput and reducing cost. AeroShield’s manufacturing process can be divided into 4 major stages, each with their own distinct set of parameters and time requirements. Under this Phase 1 award, AeroShield was able to identify and optimize a number of these parameters, including molding materials, solvent rinse conditions, critical point drying time, and annealing conditions. AeroShield also performed thorough analyses on how these optimized parameters affected important final characteristics of the gels, including optical clarity, thermal conductivity, and dimensional stability. This campaign culminated in the production of laboratory scale aerogel samples using significantly lower process times of both 36 and 18 total hours, which represent Phase 1 Target and Stretch goals. In order to achieve widespread market adoption, monolithic sheets of the aerogel material must be made to industry-standard sizes (8’ x 12’) at a cost that provides 5-7 year or less breakeven energy savings for consumers (<$2 sq/ft). The work performed under this Phase 1 award shows that time and materials required to make aerogel samples, which make up a significant portion of their overall cost, can be greatly reduced without sacrificing quality. AeroShield plans to use these optimized processes to produce larger, product-relevant sized aerogels in order to achieve target final material costs.
Wilke, Kyle↗
Ultrastructural changes in tracheal epithelial cells exposed to oxygen
White albino rats were sacrificed after 24, 36, 48, 72, and 96 h of exposure to 100% O2 at 1 atm. Tissue was prepared for the scanning electron microscope (SEM) by Critical Point Drying and for the transmission electron microscope (TEM) by plastic embedding. Scanning microscopy showed a loss of microvilli after 48 h of exposure. Cilia appeared relatively normal with SEM, but TEM revealed changes in the outer membrane. In TEM, nonciliated cells appeared swollen and often encroached on the ciliated cells. A heavy mucous blanket remained even after processing. All the changes observed that are induced by oxygen exposure contribute to mucostasis, reducing and/or halting mucociliary clearance.
Philpott, D. E.↗
Flame Retardant Effect of Aerogel and Nanosilica on Engineered Polymers
Aerogels are typically manufactured vIa high temperature and pressure-critical-point drying of a colloidal metal oxide gel filled with solvents. Aerogel materials derived from silica materials represent a structural morphology (amorphous, open-celled nanofoams) rather than a particular chemical constituency. Aerogel is not like conventional foams in that it is a porous material with extreme microporosity and composed of individual features only a few nanometers in length with a highly porous dendriticlike structure. This unique substance has unusual properties such as low thermal conductivity, refractive index and sound suppression; in addition to its exceptional ability to capture fast moving dust. The highly porous nature of the aerogel's structure provides large amounts of surface area per unit weight. For instance, a silica aerogel material with a density of 100 kilograms per cubic meters can have surface areas of around 800 to 1500 square meters per gram depending on the precursors and process utilized to produce it. To take advantage of the unique properties of silica aerogels, especially the ultra light weight and low thermal conductivity, their composites with various engineering polymers were prepared and their flammability was investigated by Cone Calorimetry. The flammability of various polystyrene/silica aerogel nanocomposites were measured. The combination of these nanocomposites with a NASA patented flame retardant SINK were also studied. The results were compared with the base polymer to show the differences between composites with different forms of silica.
Williams, Martha K.↗
Method of Fabricating X-Ray Absorbers for Low-Energy X-Ray Spectroscopy
A method of forming low-energy x-ray absorbers. Sensors may be formed on a semiconductor, e.g., silicon, wafer. A seed metal layer, e.g., gold, is deposited on the wafer and patterned into stem pads for electroplating. Stems, e.g., gold, are electroplated from the stem seed pads through a stem mask. An absorber layer, e.g., gold, is deposited on the wafer, preferably e-beam evaporated. After patterning the absorbers, absorber and stem mask material is removed, e.g., in a solvent bath and critical point drying.
Stevenson, Thomas R.↗
Array of Graphene Variable Capacitors on 100 mm Silicon Wafers for Vibration-Based Applications
Highly flexible, electrically conductive freestanding graphene membranes hold great promise for vibration-based applications. This study focuses on their integration into mainstream semiconductor manufacturing methods. We designed a two-mask lithography process that creates an array of freestanding graphene-based variable capacitors on 100 mm silicon wafers. The first mask forms long trenches terminated by square wells featuring cone-shaped tips at their centers. The second mask fabricates metal traces from each tip to its contact pad along the trench and a second contact pad opposite the square well. A graphene membrane is then suspended over the square well to form a variable capacitor. The same capacitor structures were also built on 5 mm by 5 mm bare dies containing an integrated circuit underneath. We used atomic force microscopy, optical microscopy, and capacitance measurements in time to characterize the samples.
36 MATERIALS SCIENCE↗
ORNL Infrastructure: Status Update on BEA Research Reactor Cask Planning Activities Completed During FY 2025
This report documents Oak Ridge National Laboratory’s (ORNL’s) FY 2025 progress toward establishing readiness to use the Battelle Energy Alliance (BEA) Research Reactor (BRR) shipping cask in support of the Nuclear Science User Facilities (NSUF). The BRR cask will provide a new shared infrastructure capability for transporting irradiated fuels and materials between ORNL and Idaho National Laboratory (INL), thereby supporting NSUF’s mission of enabling user access to advanced nuclear research facilities. In FY 2025, ORNL advanced the regulatory, contractual, safety review, and planning activities necessary to qualify its facilities and staff for BRR cask handling. Although loaded shipments were delayed due to fabrication lead times for Orano Federal Services LLC’s internal basket hardware, the program progressed to the point where an empty cask dry run is scheduled for October 2025. This dry run represents a critical step in demonstrating ORNL’s ability to receive, handle, and return the BRR cask.
99 GENERAL AND MISCELLANEOUS↗
Supercritical Water Oxidation (SCWO) for the treatment of spacecraft waste.
Supercritical water oxidation (SCWO) is a powerful waste treatment that has been considered as a substitute or complement to other potential spacecraft waste handling methods including jettisoning, compacted sealed storage, drying, and others. Combustible trash and garbage is mixed with water and then heated and pressurized above the critical point of water (705 °F and 218 atmospheres). The waste is nearly all oxidized to produce carbon dioxide, water and nitrogen. NOx is not formed. The combustion energy can be used to heat the input stream. SCWO is relatively complex, expensive, and hazardous compared to other methods. Oxidation of compounds containing chlorine and sulfur produces hydrochloric and sulfuric acid which can cause corrosion in the reactor. Neutralizing these acids produces salts which can precipitate and cause clogging. The major engineering challenges to implementing SCWO are chemical corrosion and fouling due to the deposition of salts. SCWO was first proposed for general waste treatment and for spacecraft in the 1980’s and extensive research has been carried out.
Harry W Jones↗
On the weathering of Martian igneous rocks
Besides the young crystallization age, one of the first arguments for the martian origin of shergottite, nakhlite, and chassignite (SNC) meteorites came from the chemical similarity of the meteorite Shergotty and the martian soil as measured by Viking XRF analyses. In the meantime, the discovery of trapped rare gas and nitrogen components with element and isotope ratios closely matching the highly characteristic ratios of the Mars atmosphere in the shock glasses of shergottite EETA79001 was further striking evidence that the SNC's are martian surface rocks. The martian soil composition as derived from the Viking mission, with its extremely high S and Cl concentrations, was interpreted as weathering products of mafic igneous rocks. The low SiO2 content and the low abundance of K and other trace elements in the martian soils point to a mafic crust with a considerably smaller degree of fractionation compared to the terrestrial crust. However, the chemical evolution of the martian regolith and soil in respect to surface reaction with the planetary atmosphere or hydrosphere is poorly understood. A critical point in this respect is that the geochemical evidence as derived from the SNC meteorites suggests that Mars is a very dry planet that should have lost almost all its initially large water inventory during its accretion.
Dreibus, G.↗
Revisiting the Effects of Seed Liquid Water Content on Isoprene Secondary Organic Aerosol Growth
Aerosol liquid water content (LWC) has been shown to enhance partitioning of water-soluble oxygenated organic vapors into the aerosol particles and facilitate aqueous chemistry, impact SOA formation, composition, and physicochemical properties. Here, this study examines the effect of aerosol liquid water content (LWC) on isoprene SOA formation using effloresced and deliquesced ammonium sulfate ((NH 4 ) 2 SO 4 ) and sodium chloride (NaCl) seed particles in an environmental chamber with photo-oxidation extending over hours under moderate relative humidity (50%-60%). Our findings indicate that isoprene SOA mass yield is not significantly influenced (p value >> 0.05) by the phase state or the chemical identity of the seed particles within a 3–4-hour reaction time scale. Detailed molecular analysis using advanced high resolution mass spectrometry indicates that while both effloresced and deliquesced seed types produced similar molecular formula distributions, deliquesced (NH 4 ) 2 SO 4 slightly favored the production of less volatile compounds. Depth-profiling analysis by single particle mass spectrometry confirmed that isoprene SOA predominantly located on the surfaces of particles with core-shell morphologies, with partial dissolution of the effloresced inorganic salt observed even below the deliquescence relative humidity (DRH) of salt. This finding suggests that assuming dry salt core particles do not interact with SOA coatings, based on salt deliquescence points, may overlook important aqueous chemistry. These results emphasize the critical role of reaction time scale and mixing state on SOA formation and call for further research to understand LWC effects on SOA from different precursors.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
The Critical Influence of Spin–Dry Technique on the Surface Passivation Quality of Crystalline Silicon Solar Cell Structures
This study examines the effects of spin-dry (SD) and N 2 blow-dry (ND) techniques on the quality and surface passivation performance of silicon oxide grown in ozone-dissolved deionized water. The SD method achieves greater oxide thickness uniformity, averaging 1.39 nm ± 4.17% across 49 points, compared to 1.68 nm ± 21.67% for the ND wafers. However, persistently poor passivation of ozonated oxide-grown wafers following the SD process is exhibited, with carrier lifetime, τ eff < 0.3 ms and saturation current density, J 0 (per side) ranging from 26 to 45 fA cm 2 . These findings are analyzed in the context of the fundamental phenomena involved in the drying processes of both techniques. Following this, an optimized spin-drying process is developed, resulting in improved τ eff and J 0 values of 1.4 ms and 5.6 fA cm –2 , respectively. Scanning electron microscopy further confirms that the oxide films dried with the enhanced SD technique are free of pinholes.
14 SOLAR ENERGY↗
Predicting EBC Temperature Limits for Industrial Gas Turbines
Higher turbine inlet temperatures may require the use of ceramic matrix composites (CMC) such as SiC/SIC, which require environmental barrier coatings (EBCs) to protect them against the detrimental effect of water vapor. Here, the goal of this project is to determine the maximum bond coating temperature for EBCs for land-based turbines, where the minimum coating lifetime is 25,000 h. If the temperature exceeds the 1414°C melting point of the Si bond coating, then coatings without a bond coating also need to be evaluated. Thus, current Yb 2 Si 2 O 7 EBCs with a Si bond coating and next-generation EBCs without a Si bond coating are being evaluated in laboratory testing using 1-h cycles in air+90%H 2 O. For this initial work, coatings were deposited on CVD SiC coupons. Reaction kinetics at 1250°, 1300° and 1350°C have been evaluated by measuring the thickness of the thermally grown silica scale after 100–500 h exposures. For comparison, scale growth rates for uncoated SiC and Si specimens in dry and wet environments were included as minimum and maximum values, respectively. Based on a critical scale thickness failure criteria, estimated maximum temperatures were calculated for both EBC systems using this initial data.
42 ENGINEERING↗
T–x diagrams for the CO 2 –H 2 O system: The importance of water content in CO 2 transportation for carbon capture and storage
Abstract When water is present in a CO 2 pipeline, corrosion or plugging can occur due to the formation of liquid water or gas hydrate, respectively. Understanding how corrosion and hydrate plugging can be avoided is important for enhanced oil recovery and carbon dioxide capture and storage processes. If the CO 2 is sufficiently dried prior to transportation, the formation of these problematic free‐water phases can be avoided. In this work, isobaric T–x diagrams were developed from the P–T diagram for the CO 2 –H 2 O binary system. Pressures ranging from just below the lower quadruple point to above the lower critical end point were studied. These diagrams are meant to give the reader a better conceptual understanding of how the water composition in CO 2 –H 2 O mixtures will influence phases that form at different temperatures and pressures. The diagrams are analyzed from the perspective of flow assurance in CO 2 transportation.
Wadsworth, Lindsey A.↗
Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and Economic Modeling of Heat Production and Electricity Generation: Preprint
To better understand the heat production, electricity generation performance and economic viability of closed loop geothermal systems in hot-dry-rock, the Closed Loop Geothermal Group, a consortium of several national labs and academic institutions has tabulated time-dependent numerical solutions and levelized cost results of two popular closed loop heat exchanger designs (u-tube and co-axial). The heat exchanger designs were evaluated for two working fluids (water and super-critical CO2) while varying seven continuous independent parameters of interest (i.e., mass flow rate, vertical depth, horizontal extent, borehole diameter, formation gradient, formation conductivity, and injection temperature). The corresponding numerical solutions (approximately 1.2 million per heat exchanger design) are stored as multi-dimensional HDF5 datasets and can be queried at off-grid points using multi-dimensional linear interpolation. A Python script was developed to query this database and estimate time-dependent electricity generation using an Organic Rankine cycle (for water) or direct turbine expansion cycle (for CO2) and perform a cost assessment. This document aims to give an overview of the HDF5 database file and highlights how to read, visualize, and query quantities of interest (e.g., levelized cost of electricity, levelized cost of heat) using the accompanying python scripts. Details regarding the capital, operation, and maintenance and levelized cost calculation using the TEA (techno-economic analysis) script are provided.
co-axial↗
The Importance of Accounting for Landscape Position When Investigating Grasslands: A Multidisciplinary Characterisation of a California Coastal Grassland
Abstract Grasslands are one of the most common land‐cover types, providing important ecosystem services globally, yet few studies have examined grassland critical‐zone functioning throughout hillslopes. This study characterised a coastal grassland over a small hillslope at Point Reyes National Seashore, California, using multidisciplinary techniques, combining remotely‐sensed, geophysical, plant, and soil measurements. Clustering techniques delineated the study area into four landscape zones, up‐, mid‐, and down‐slope, and a bordering riparian ecotone, which had distinct environmental properties that varied spatially across the site, with depth, and time. Soil moisture increased with depth and down slope towards a bordering riparian zone, and co‐varied with soil CO 2 flux rates both spatially and temporally. This highlighted three distinct controls of soil moisture on soil respiration: CO 2 fluxes were inhibited by high moisture content in the down‐slope during the wet winter months, and converged across landscape positions in the dry summer months, while also displaying post‐rain pulses. The normalised difference vegetation index (NDVI) ranged from 0.32 (September)–0.80 (April) and correlated positively with soil moisture and aboveground biomass, moving down slope. Yet, NDVI, aboveground biomass, and soil moisture were not correlated to soil organic carbon (SOC) content (0.4%–4.5%), which was highest in the mid‐slope. The SOC content may instead be linked to shifts in dominant grassland species and their rhizosphere properties with landscape position. This multidisciplinary characterisation highlighted significant heterogeneity in grassland properties with landscape position, and demonstrated an approach that could be used to characterise other critical‐zone environments on hillslopes.
54 ENVIRONMENTAL SCIENCES↗
Feedstock Harvesting and Storage: Post-Harvest Management for Quality Preservation
Research on harvesting, collection, and storage has matured, and our understanding of feedstock supply challenges has led us to the point of our current goals. The goals of this project include using storage time to collect impactful data of critical feedstock properties in storage and to characterize the feedstock before delivery. This data will inform delivery scheduling of biomass and relevant compositional information to minimize variations in the material quality, which are critical to the preprocessing and conversion performance.
09 BIOMASS FUELS↗