Search NASA⌕ Search

SEARCH · Search NASA

Results for “crystal design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Physical Vapor Transport of Mercurous Chloride Crystals: Design of a Microgravity Experiment

Flow field characteristics predicted from a computational model show that the dynamical state of the flow, for practical crystal growth conditions of mercurous chloride, can range from steady to unsteady. Evidence that the flow field can be strongly dominated by convection for ground-based conditions is provided by the prediction of asymmetric velocity profiles bv the model which show reasonable agreement with laser Doppler velocimetry experiments in both magnitude and planform. Unsteady flow is shown to be correlated with a degradation of crystal quality as quantified by light scattering pattern measurements, A microgravity experiment is designed to show that an experiment performed with parameters which yield an unsteady flow becomes steady (diffusive-advective) in a microgravity environment of 10(exp -3) g(sub 0) as predicted by the model, and hence yields crystals with optimal quality.

Duval, W, M. B.↗
NASA NTRS1975

Focusing crystal polarimeter designed for X-ray polarimetry - Construction and performance

A method for the construction of a graphite crystal polarimeter designed for measuring linear polarization of X-ray continuum sources is described. The dependence of reflected intensity upon the polarization direction of the incident beam at Bragg angles of 45 deg is used to measure the polarization. The particular instrument described was designed for a satellite X-ray polarimeter. By using a focusing parabolic surface instead of a nonfocusing flat crystal, the signal-to-background ratio is improved by a factor of 30 as compared to a flat crystal polarimeter of the same effective area. The focusing properties of the reflector were tested both optically and with X-rays. The performance of the instrument as a polarimeter was tested with a continuum X-ray source of small polarization, which was independently measured by a single flat crystal polarimeter. The agreement between the two measurements is excellent, indicating that the instrument can measure polarizations as low as 0.3%.

Toraskar, J. R.↗
DOE OSTI2020

Direct observation of dual-step twinning nucleation in hexagonal close-packed crystals

Design and processing of advanced lightweight structural alloys based on magnesium and titanium rely critically on a control over twinning which, however, remains elusive to date and is dependent on an explicit understanding on the twinning nucleation mechanism in hexagonal close-packed (HCP) crystals. Here, by using in-situ high resolution transmission electron microscopy, we directly reveal a “dual-step” twinning nucleation mechanism in HCP rhenium nanocrystals. It is found that nucleation of the predominant {10 -12} twinning is initiated by disconnections on the Prismatic¦Basal interfaces which establish the lattice correspondence of the twin with a minor deviation from the ideal orientation. Subsequently, the minor deviation is corrected by the formation of coherent twin boundaries through rearrangement of the disconnections on the Prismatic¦Basal interface; thereafter, the coherent twin boundaries propagate by twinning disconnections. The findings provide much-needed high-resolution evidences to the twinning nucleation mechanism in HCP crystals, with crucial implications for engineering advanced structural alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Grand canonical inverse design of multicomponent colloidal crystals

Inverse design methods are powerful computational approaches for creating colloidal systems which self-assemble into a target morphology by reverse engineering the Hamiltonian of the system. Despite this, these optimization procedures tend to yield Hamiltonians which are too complex to be experimentally realized. An alternative route to complex structures involves the use of several different components, however, conventional inverse design methods do not explicitly account for the possibility of phase separation into compositionally distinct structures. We present an inverse design scheme for multicomponent colloidal systems by combining active learning with a method to directly compute their ground state phase diagrams. This explicitly accounts for phase separation and can locate stable regions of Hamiltonian parameter space which grid-based surveys are prone to miss. Using this we design low-density, binary structures with Lennard-Jones-like pairwise interactions that are simpler than in the single component case and potentially realizable in an experimental setting. This reinforces the concept that ground states of simple, multicomponent systems might be rich with previously unappreciated diversity, enabling the assembly of non-trivial structures with only few simple components instead of a single complex one.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Analyzer-based X-ray phase contrast imaging using the forward-diffracted o-beam in a few-millimetre-thick Bragg-case asymmetrically cut crystal

An analyzer-based X-ray phase contrast imaging experiment employing the forward-diffracted o-beam in a few-millimetre-thick Bragg-case asymmetrically cut analyzer crystal has been implemented and tested in a geometry similar to that used in conventional radiography. The high angular stability requirements were overcome using specially designed crystals and a closed-loop feedback intensity system, monitoring the intensity of the diffracted h-beam. Analyzer-based images (ABis) taken at different angular positions on the forward-diffracted o-beam rocking curve show different contrasts, as expected. However, the ABis did not show sharp borders. This was closely investigated by X-ray topography and Δ d / d mapping and was attributed to the stresses caused by the analyzer crystal's own weight in the bulk. Further investigation of the crystal design using finite element analysis coupled with dynamical theory of X-ray diffraction is envisaged.

Honnicke, Marcelo Goncalves (ORCID:000000033276432↗
DOE OSTI2021

Design of nematic liquid crystals to control microscale dynamics

The dynamics of small particles, both living such as swimming bacteria and inanimate, such as colloidal spheres, has fascinated scientists for centuries. If one could learn how to control and streamline their chaotic motion, that would open technological opportunities in the transformation of stored or environmental energy into systematic motion, with applications in micro-robotics, transport of matter, guided morphogenesis. This review presents an approach to command microscale dynamics by replacing an isotropic medium with a liquid crystal. Orientational order and associated properties, such as elasticity, surface anchoring, and bulk anisotropy, enable new dynamic effects, ranging from the appearance and propagation of particle-like solitary waves to self-locomotion of an active droplet. By using photoalignment, the liquid crystal can be patterned into predesigned structures. In the presence of the electric field, these patterns enable the transport of solid and fluid particles through nonlinear electrokinetics rooted in anisotropy of conductivity and permittivity. Director patterns command the dynamics of swimming bacteria, guiding their trajectories, polarity of swimming, and distribution in space. This guidance is of a higher level of complexity than a simple following of the director by rod-like microorganisms. Namely, the director gradients mediate hydrodynamic interactions of bacteria to produce an active force and collective polar modes of swimming. The patterned director could also be engraved in a liquid crystal elastomer. When an elastomer coating is activated by heat or light, these patterns produce a deterministic surface topography. The director gradients define an activation force that shapes the elastomer in a manner similar to the active stresses triggering flows in active nematics. Finally, the patterned elastomer substrates could be used to define the orientation of cells in living tissues. The liquid-crystal guidance holds a major promise in achieving the goal of commanding microscale active flows.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tuning chemical precompression: Theoretical design and crystal chemistry of novel hydrides in the quest for warm and light superconductivity at ambient pressures

Over the past decade, a combination of crystal structure prediction techniques and experimental synthetic work has thoroughly explored the phase diagrams of binary hydrides under pressure. The fruitfulness of this dual approach is demonstrated in the recent identification of several superconducting hydrides with T c s approaching room temperature. We start with an overview of the computational procedures for predicting stable structures and estimating their propensity for superconductivity. A survey of phases with high T c reveals some common structural features that appear conducive to the strong coupling of the electronic structure with atomic vibrations that leads to superconductivity. We discuss the stability and superconducting properties of phases containing two of these—molecular H 2 units mixed with atomic H and hydrogenic clathrate-like cages—as well as more unique motifs. Lastly, we argue that ternary hydride phases, whose exploration is still in its infancy, are a promising route to achieve simultaneous superconductivity at high temperatures and stability at low pressures. Several ternary hydrides arise from the addition of a third element to a known binary hydride structure through site mixing or onto a new site, and several more are based on altogether new structural motifs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1988

Research Reports: 1988 NASA/ASEE Summer Faculty Fellowship Program

The basic objectives are to further the professional knowledge of qualified engineering and science faculty members; to stimulate an exchange of ideas between participants and NASA: to enrich and refresh the research and teaching activities of the participants' institutions; and to contribute to the research objectives of the NASA centers. Topics addressed include: cryogenics; thunderstorm simulation; computer techniques; computer assisted instruction; system analysis weather forecasting; rocket engine design; crystal growth; control systems design; turbine pumps for the Space Shuttle Main engine; electron mobility; heat transfer predictions; rotor dynamics; mathematical models; computational fluid dynamics; and structural analysis.

Freeman, L. Michael↗
NASA NTRS2013

ADR salt pill design and crystal growth process for hydrated magnetic salts

A process is provided for producing a salt pill for use in very low temperature adiabatic demagnetization refrigerators (ADRs). The method can include providing a thermal bus in a housing. The thermal bus can include an array of thermally conductive metal conductors. A hydrated salt can be grown on the array of thermally conductive metal conductors. Thermal conductance can be provided to the hydrated salt.

Shirron, Peter J.↗
NASA NTRS1972

Crystal-controlled multivibrator

Method is described for designing crystal oscillator which has frequency and symmetry stability suitable for system-clock-generators used in spacecraft data systems. Simple multivibrator is used in which timing capacitor is replaced by a crystal.

Schober, R. C.↗
DOE OSTI2022

Ion Transport in 2D Nanostructured $\pi$-Conjugated Thieno[3,2- b ]thiophene-Based Liquid Crystal

Leveraging the self-assembling behavior of liquid crystals designed for controlling ion transport is of both fundamental and technological significance. Here, we have designed and prepared a liquid crystal that contains (2,5-bis(5-(2,5,8,11-tetraoxatridecan-13-yl)thiophen-2yl)thieno[3,2-b]thiophene (BTTT) as mesogenic core and conjugated segment and symmetric tetra(ethylene oxide) (EO4) as polar side chains for ionic conducting regions. Driven by the crystallization of the BTTT cores, BTTT/dEO4 exhibits well-ordered smectic phases below 71.5 °C as confirmed by differential scanning calorimetry, polarized optical microscope, temperature dependent wide-angle X-ray scattering and grazing incidence wide-angle X-ray scattering (GIWAXS). We adopted a combination of experimental GIWAXS and molecular dynamics (MD) simulations to better understand the molecular packing of BTTT/dEO4 films, particularly when loaded with the ion conducting salt, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Ionic conduction of BTTT/dEO4 is realized by the addition of LiTFSI, with the material able to maintain smectic phases up to r = [Li + ]/[EO] = 0.1. In this work, The highest ionic conductivity of 8 × 10 -3 S/cm was attained at an intermedium salt concentration of r = 0.05. It was also found that ion conduction in BTTT/dEO4 is enhanced by forming a smectic layered structure with irregular interfaces between the BTTT and EO4 layers and by the lateral film expansion upon salt addition. This can be explained by the enhancement of the misalignment and configurational entropy of the side chains, which increase their local mobility and that of the solvated ions. Our molecular design thus illustrates how, beyond the favorable energetic interactions that drive the assembly and ion solvating domains, modulation of entropic effects can also be favorably harnessed to improve ion conduction.

thin film electrochemical impedance spectroscopy↗
NASA NTRS2009

Method of Generating X-Ray Diffraction Data for Integral Detection of Twin Defects in Super-Hetero-Epitaxial Materials

A method provides X-ray diffraction (XRD) data suitable for integral detection of a twin defect in a strained or lattice-matched epitaxial material made from components having crystal structures having symme try belonging to different space groups. The material is mounted in a n X-ray diffraction (XRD) system. In one embodiment, the XRD system's goniometer angle Omega is set equal to (Theta(sub B)-Beta) where The ta(sub B) is a Bragg angle for a designated crystal plane of the allo y that is disposed at a non-perpendicular orientation with respect to the {111) crystal plane, and Beta is the angle between the designate d crystal plane and a { 111 } crystal plane of one of the epitaxial components. The XRD system's detector angle is set equal to (Theta(su b B)+Beta). The material can be rotated through an angle of azimuthal rotation Phi about the axis aligned with the material. Using the det ector, the intensity of the X-ray diffraction is recorded at least at the angle at which the twin defect occurs.

Park, Yeonjoon↗
DOE OSTI2023

High-entropy halide perovskite single crystals stabilized by mild chemistry

High entropy materials are excellent candidates for a range of functional materials but traditionally require high-temperature synthetic procedures over 1000°C and complex processing techniques such as hot rolling to form. One route to address the extreme synthetic requirements for high entropy materials should involve designing crystal structures with ionic bonding networks and low cohesive energies. Here, we develop room-temperature (20°C) and low temperature (80°C) solution synthesis procedures for a new class of metal-halide perovskite high entropy semiconductor (HES) single crystals. Due to the soft, ionic lattice nature of the class of metal-halide perovskites, these HES single crystals are designed on the cubic Cs 2 MCl 6 (M = Zr 4+ , Sn 4+ , Te 4+ , Hf 4+ , Re 4+ , Os 4+ , Ir 4+ , or Pt 4+ ) vacancy-ordered double perovskite structure from the self-assembly of stabilized complexes in multielement inks, namely free Cs + cations and five or six different isolated [MCl6] 2- anionic octahedral molecules well-mixed in strong hydrochloric acid. The resulting single-phase single crystals span two HES families of five- and six-elements occupying the M-site as a random alloy in near-equimolar ratios, with the overall Cs 2 MCl 6 crystal structure and stoichiometry maintained. In conclusion, the incorporation of various [MCl 6 ] 2- octahedral molecular orbitals disordered across the high entropy five- and six-element Cs 2 MCl 6 single crystals produces complex vibrational and electronic structures with energy transfer interactions between the confined exciton states of the five or six different isolated octahedral molecules.

36 MATERIALS SCIENCE↗
NASA NTRS2008

Method for the growth of large low-defect single crystals

A method and the benefits resulting from the product thereof are disclosed for the growth of large, low-defect single-crystals of tetrahedrally-bonded crystal materials. The process utilizes a uniquely designed crystal shape whereby the direction of rapid growth is parallel to a preferred crystal direction. By establishing several regions of growth, a large single crystal that is largely defect-free can be grown at high growth rates. This process is particularly suitable for producing products for wide-bandgap semiconductors, such as SiC, GaN, AlN, and diamond. Large low-defect single crystals of these semiconductors enable greatly enhanced performance and reliability for applications involving high power, high voltage, and/or high temperature operating conditions.

Powell, J. Anthony↗
DOE OSTI2026

Generative Models for Crystalline Materials

Understanding structure-property relationships in materials is fundamental in condensed matter physics and materials science. Over the past few years, machine learning (ML) has emerged as a powerful tool for advancing this understanding and accelerating materials discovery. Early ML approaches primarily focused on constructing and screening large material spaces to identify promising candidates for various applications. More recently, research efforts have increasingly shifted toward generating crystal structures using end-to-end generative models. This review analyzes the current state of generative modeling for crystal structure prediction and de novo generation. It examines crystal representations, outlines the generative models used to design crystal structures, and evaluates their respective strengths and limitations. Furthermore, the review highlights experimental considerations for evaluating generated structures and provides recommendations for suitable existing software tools. Emerging topics, such as modeling disorder and defects, integration in advanced characterization, incorporating synthetic feasibility constraints, and model explainability are explored. Ultimately, this work aims to inform both experimental scientists looking to adapt suitable ML models to their specific circumstances and ML specialists seeking to understand the unique challenges related to inverse materials design and discovery.

Metni, Houssam [Karlsruhe Inst. of Technology (KIT↗
NASA NTRS1982

Growth of triglycine sulfate (TGS) crystals by solution technique

The growth of crystals from solution is greatly influenced by buoyancy driven convection. In a low-g environment, convection is greatly suppressed and diffusion becomes the predominant mechanism for thermal and mass transport. An experiment to grow TGS crystals by solution technique during the orbital Spacelab III mission has been designed. Crystals are grown by a new and unique technique of extracting heat from the crystal through a sting. The cooling at the sting tip is responsible for the desired supersaturation near the growing crystal. Calculations indicate that the cooled sting technique for solution crystal growth is necessary in low-g to maintain a maximum growth rate of 1 mm/day. Results of groundbased work in support of the flight experiment are discussed.

Lal, R. B.↗