Search NASA⌕ Search

SEARCH · Search NASA

Results for “crystalline solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A metastable liquid melted from a crystalline solid under decompression

A metastable liquid may exist under supercooling, sustaining the liquid below the melting point such as supercooled water and silicon. It may also exist as a transient state in solid–solid transitions, as demonstrated in recent studies of colloidal particles and glass-forming metallic systems. One important question is whether a crystalline solid may directly melt into a sustainable metastable liquid. By thermal heating, a crystalline solid will always melt into a liquid above the melting point. Here we report that a high-pressure crystalline phase of bismuth can melt into a metastable liquid below the melting line through a decompression process. The decompression-induced metastable liquid can be maintained for hours in static conditions, and transform to crystalline phases when external perturbations, such as heating and cooling, are applied. It occurs in the pressure–temperature region similar to where the supercooled liquid Bi is observed. Finally, akin to supercooled liquid, the pressure-induced metastable liquid may be more ubiquitous than we thought.

36 MATERIALS SCIENCE↗

Directing Boron–Phosphorus Bonds in Crystalline Solid: Oxidative Polymerization of P=B=P Monomers into 1D Chains

Over 20 years after the last inorganic ternary B–P compound was reported, Na 2 BP 2 , a new compound containing one-dimensional B–P polyanionic chains has been synthesized. Common high-temperature synthetic methods required for the direct reaction of boron and phosphorus negate the possible formation of metastable or low temperature phases. In this study, oxidative elimination was used to successfully condense 0D BP 2 3– anionic monomers found in a Na 3 BP 2 precursor into unique 1D BP 2 2– chains consisting of five-member B 2 P 3 rings connected by bridging P atoms in the crystal structure of Na 2 BP 2 . In conclusion, the synthesis was guided by in situ X-ray powder diffraction studies, which revealed the metastable nature of the products of oxidative elimination reactions. Na 2 BP 2 is predicted to be an electron balanced semiconductor which was confirmed by UV–vis spectroscopy with the experimentally determined band gap of 1.1 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a scalar-based geometric parameterization approach for the crystal structure landscape of dithienylethene-based crystalline solids

Dithienylethenes (DTEs) are a promising class of organic photoswitches that can be used to create crystalline solids with properties controlled by light. However, the ability of DTEs to adopt multiple conformations, only one of which is photoactive, complicates the rational design of these materials. Herein, the synthesis and structural characterization of 19 crystalline solids containing a single DTE molecule are described. A novel D – D analysis of the molecular geometries obtained from rotational potential energy surface calculations and the ensemble of experimental structures were used to construct a crystal landscape for DTE. Of the 19 crystal structures, 17 contained photoinactive DTE rotamers and only 2 were photoactive. These results highlight the challenges associated with the design of these materials. Overall, the D – D analysis described herein provides rapid, effective and intuitive means of linking the molecular structure to photoactivity that could be applied more broadly to afford a general strategy for producing photoactive diarylethene-based crystalline solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theory of electric, magnetic, and toroidal polarizations in crystalline solids with applications to hexagonal lonsdaleite and cubic diamond

Multipolar order in bulk crystalline solids is characterized by multipole densities-denoted as polarizations in this work-that cannot be cleanly defined using the concepts of classical electromagnetism. Here we use group theory to overcome this difficulty and present a systematic study of electric, magnetic, and toroidal multipolar order in crystalline solids. Based on our symmetry analysis, we identify five categories of polarized matter, each of which is characterized by distinct features in the electronic band structure. For example, Rashba spin splitting in electropolar bulk materials like wurtzite represents the electric dipolarization in these materials. We also develop a general formalism of indicators for individual multipole densities that provide a physical interpretation and quantification of multipolar order. Our work clarifies the relation between patterns of localized multipoles and macroscopic multipole densities they give rise to. To illustrate the general theory, we discuss its application to polarized variants of hexagonal lonsdaleite and cubic diamond structures. In conclusion, our work provides a general framework for classifying and expanding current understanding of multipolar order in complex materials.

36 MATERIALS SCIENCE↗

Reverse Mössbauer effect as a possible source of “hot” molecules absorbed in crystalline solids at low temperature

As an attempt to explain some of the many anomalies and unresolved problems which have been reported about the dynamic behavior of particles and molecules absorbed in crystalline solids, the “reverse Mössbauer effect” (RME) is proposed. RME theory posits that a particle in non-equilibrium state with respect to a crystal (colliding with the crystal or absorbed in it, but set out of thermal equilibrium by some external cause) is scattered by the whole crystal with a momentum proportional to a vector representing a reciprocal lattice point. The scattering is expected to occur with a well-defined probability and the momentum transferable to the particle is expected to follow a predictable distribution. The RME theory, in practice, is an extension of the Bragg–von Laue scattering law to high-energy colliding particles, in general, and can be applied to any particle or molecule colliding with the surface of a crystalline solid or absorbed in it, but not in thermal equilibrium with the crystal lattice. We verified the RME theory by considering a well-defined unresolved problem. In an experimental study about methane adsorbed in the zeolite Na-ZSM-5 [H. Jobic, Chem. Phys. Lett. 170, 217 (1990)] reporting neutron inelastic-scattering spectra (recoiled bands) at 10 K, the translational kinetic energy of methane resulted to be much higher than equilibrium expected value, namely, about 85 K (or 7.3 meV). The author concluded that “the interpretation of this unusual behavior has yet to be found.” In the present study, on the basis of the RME, an explanation of this behavior is put forward.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Novel Dual-Step Nucleation Pathway in Crystalline Solids under Neutron Irradiation

Innovations in nanostructuring of inorganic crystalline solids are often limited by prerequisite critical nucleation energy and solute supersaturation for formation of a phase. This research provides direct evidence supporting the viability of an unconventional irradiation-induced nanostructuring process, via transmission electron microscopy, that circumvents these preconditions. Using polymorphic silicon carbide (SiC) as a prototype, a surprising two-step nucleation route is demonstrated through which nanoscale distribution of the second phase is achieved by reaction of solutes with neutron irradiation-induced precursors. In the first step, nanoscale α–SiC precipitates in a β–SiC matrix unexpectedly nucleate heterogeneously at structural defects. This occurs at significantly lower temperatures compared with the usual β→α transition temperature. Subsequently, α–SiC precipitate acts as a surrogate template for its structural and compositional transition into a fission product precipitate, palladium silicide. These discoveries provide a modern view of irradiation engineering in polymorphic ceramics for advanced applications.

36 MATERIALS SCIENCE↗

A fluctuation method to calculate the third order elastic constants in crystalline solids

This paper derives exact expressions of the isothermal third order elastic constants (TOE) in crystalline solids in terms of the kinetic and potential energies of the system. These expressions reveal that the TOE constants consist of a Born component and a relaxation component. The Born component is simply the third derivative of the system's potential energy with respect to the deformation, while the relaxation component is related to the non-uniform rearrangements of the atoms when the system is subject to a macroscopic deformation. Further, based on the general expressions derived here, a direct (fluctuation) method of computing the isothermal TOE constants is developed. Numerical examples of using this fluctuation method are given to compute the TOE constants of single crystal iron.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanochemical spinodal decomposition: a phenomenological theory of phase transformations in multi-component, crystalline solids

Here, we present a phenomenological treatment of diffusion-driven martensitic phase transformations in multi-component crystalline solids that arise from non-convex free energies in mechanical and chemical variables. The treatment describes diffusional phase transformations that are accompanied by symmetry-breaking structural changes of the crystal unit cell and reveals the importance of a mechanochemical spinodal, defined as the region in strain-composition space, where the free-energy density function is non-convex. The approach is relevant to phase transformations wherein the structural order parameters can be expressed as linear combinations of strains relative to a high-symmetry reference crystal. The governing equations describing mechanochemical spinodal decomposition are variationally derived from a free-energy density function that accounts for interfacial energy via gradients of the rapidly varying strain and composition fields. A robust computational framework for treating the coupled, higher-order diffusion and nonlinear strain gradient elasticity problems is presented. Because the local strains in an inhomogeneous, transforming microstructure can be finite, the elasticity problem must account for geometric nonlinearity. An evaluation of available experimental phase diagrams and first-principles free energies suggests that mechanochemical spinodal decomposition should occur in metal hydrides such as ZrH 2-2c . The rich physics that ensues is explored in several numerical examples in two and three dimensions, and the relevance of the mechanism is discussed in the context of important electrode materials for Li-ion batteries and high-temperature ceramics.

36 MATERIALS SCIENCE↗

Bulk-scale stress–strain hysteresis in layered crystalline solids: A study of graphite and Ti 3 SiC 2

Polycrystalline graphite and the MAX phase Ti 3 SiC 2 are layered crystalline solids with similar deformation mechanisms, including basal slip, ripplocation boundaries (RBs), kink boundaries (KBs), and cracking. The interplay of these mechanisms, notably in energy dissipation, has been much discussed in the past twenty-five years. This study builds upon previous work, investigating deformation with a renewed emphasis on the bulk-scale and given recent findings concerning RBs. Our investigation compares the evolution of energy dissipation, nonlinear recoverable and irrecoverable strain, and damage upon increasing stress for graphite and Ti 3 SiC 2 . Benitez et al.’s (2016) methodology of compressive cyclic loading and post-mortem electron backscatter diffraction (EBSD) to assess the prevalence of kinking based on low-angle grain boundaries (LAGBs) was used. Strains were measured with digital image correlation and EBSD was conducted on Ti 3 SiC 2 leveraging dictionary indexing, which was necessary herein to identify LAGBs accurately. The stress–strain stages of Ti 3 SiC 2 agree with literature on Ti 2 AlC. Damage and energy dissipation were more accelerated in graphite. No significant difference was observed in the fraction of LAGBs between pristine and unloaded Ti 3 SiC 2 . Trends observed and EBSD evidence that KBs were not dominant suggest that RBs are the primary dissipator of energy in both materials.

36 MATERIALS SCIENCE↗

Nonlinear electronic excitations in crystalline solids using meta-generalized gradient approximation and hybrid functional in time-dependent density functional theory

We develop methods to calculate electron dynamics in crystalline solids in real-time time-dependent density functional theory employing exchange-correlation potentials which reproduce band gap energies of dielectrics; a meta-generalized gradient approximation was proposed by Tran and Blaha [Phys. Rev. Lett. 102, 226401 (2009)] (TBm-BJ) and a hybrid functional was proposed by Heyd, Scuseria, and Ernzerhof [J. Chem. Phys. 118, 8207 (2003)] (HSE). In time evolution calculations employing the TB-mBJ potential, we have found it necessary to adopt the predictor-corrector step for a stable time evolution. We have developed a method to evaluate electronic excitation energy without referring to the energy functional which is unknown for the TB-mBJ potential. For the HSE functional, we have developed a method for the operation of the Fock-like term in Fourier space to facilitate efficient use of massive parallel computers equipped with graphic processing units. We compare electronic excitations in silicon and germanium induced by femtosecond laser pulses using the TB-mBJ, HSE, and a simple local density approximation (LDA). At low laser intensities, electronic excitations are found to be sensitive to the band gap energy: they are close to each other using TB-mBJ and HSE and are much smaller in LDA. At high laser intensities close to the damage threshold, electronic excitation energies do not differ much among the three cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Suppressed Lone Pair Electrons Explain Unconventional Rise of Lattice Thermal Conductivity in Defective Crystalline Solids

Manipulating thermal properties of materials can be interpreted as the control of how vibrations of atoms (known as phonons) scatter in a crystal lattice. Compared to a perfect crystal, crystalline solids with defects are expected to have shorter phonon mean free paths caused by point defect scattering, leading to lower lattice thermal conductivities than those without defects. While this is true in many cases, alloying can increase the phonon mean free path in the Cd-doped AgSnSbSe 3 system to increase the lattice thermal conductivity from 0.65 to 1.05 W m –1 K –1 by replacing 18% of the Sb sites with Cd. It is found that the presence of lone pair electrons leads to the off-centering of cations from the centrosymmetric position of a cubic lattice. X-ray pair distribution function analysis reveals that this structural distortion is relieved when the electronic configuration of the dopant element cannot produce lone pair electrons. Furthermore, a decrease in the Grüneisen parameter with doping is experimentally confirmed, establishing a relationship between the stereochemical activity of lone pair electrons and the lattice anharmonicity. The observed “harmonic” behavior with doping suggests that lone pair electrons must be preserved to effectively suppress phonon transport in these systems.

36 MATERIALS SCIENCE↗

Issues concerning the determination of solubility products of sparingly soluble crystalline solids: solubility of HfO2(cr)

Solubility studies were conducted with HfO2(cr) solid as a function HCl and ionic strength ranging from 2.0 to 0.004 mol kg -1. These studies involved 1) using two different amounts of the solid phase, 2) acid washing the bulk solid phase, 3) preheating the solid phase to 1400 °C, and 4) heating amorphous HfO2(am) suspensions to 90°C to ascertain whether the HfO2(am) converts to HfO2(cr) and to determine the solubility from the oversaturation direction. Based on the results of these treatments it is concluded that the HfO2(cr) contains a small fraction of less crystalline, but not amorphous, material [HfO2(lcr)] and this, rather than the HfO2(cr), is the solubility-controlling phase in the range of experimental variables investigated in this study. The solubility data are interpreted using both the Pitzer and SIT models and they provide log10 ??0 values of -(59.75±0.35) and -(59.48±0.41), respectively, for the solubility product of HfO2(lcr) [HfO2(lcr) + 2H2O Hf4+ + 4OH - ]. The log 10 of the solubility product of HfO2(cr) is estimated to be < -63. The observation of a small fraction of less crystalline higher solubility material is consistent with the general picture that mineral surfaces are often structurally and/or compositionally imperfect leading to a higher solubility than the bulk crystalline solid. This study stresses the urgent need, during interpretation of solubility data, of taking precautions to make certain that the observed solubility behavior for sparingly-soluble solids is assigned to the proper solid phase.

Rai, Dhanpat↗

Melting anisotropy in crystalline solids

Despite the long and extensive history of melting studies, experiments to determine the dependence of melting on crystal orientation are lacking. Using longitudinal sound speed measurements in aluminum single crystals shock compressed along < 100 > and < 110 > to 168 GPa, we address this need and show that the melting transition (both onset and completion) is strongly anisotropic. Furthermore, the present findings demonstrate the need to consider the role of deformation induced lattice defects on the melting transition and provide a general approach to examine melting anisotropy in crystalline solids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mapping causal patterns in crystalline solids

The evolution of the atomic structures of the combinatorial library of Sm-substituted thin film BiFeO 3 along the phase transition boundary from the ferroelectric rhombohedral phase to the non-ferroelectric orthorhombic phase is explored using scanning transmission electron microscopy. Localized properties, including polarization, lattice parameter, and chemical composition, are parameterized from atomic-scale imaging, and their causal relationships are reconstructed using a linear non-Gaussian acyclic model. This approach is further extended to explore the spatial variability of the causal coupling using the sliding window transform method, which revealed that new causal relationships emerged at both the expected locations, such as domain walls and interfaces, and at additional regions forming clusters in the vicinity of the walls or spatially distributed features. While the exact physical origins of these relationships are unclear, they likely represent nanophase-separated regions in the morphotropic phase boundaries. Overall, we posit that an in-depth understanding of complex disordered materials away from thermodynamic equilibrium necessitates understanding not only the generative processes that can lead to observed microscopic states but also the causal links between multiple interacting subsystems.

Causal inference↗

Nonaffine heterogeneities and droplet fluctuations in an equilibrium crystalline solid

We show, using molecular-dynamics simulations, that a two-dimensional Lennard-Jones solid exhibits droplet fluctuations characterized by nonaffine deviations from local crystallinity. The fraction of particles in these droplets increases as the mean density of the solid decreases and approaches {approx_equal}20% of the total number in the vicinity of the fluid-solid phase boundary. We monitor the geometry, local equation of state, density correlations, and Van Hove functions of these droplets. We provide evidence that these nonaffine heterogeneities should be interpreted as being droplet fluctuations from nearby metastable minima. The local excess pressure of the droplets plotted against the local number density shows a van der Waal loop with distinct branches corresponding to fluidlike compact and stringlike glassy droplets. The distinction between fluidlike and glassy droplets disappears above a well-defined temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CASM — A software package for first-principles based study of multicomponent crystalline solids

CASM is a software package that enables first-principles based studies of crystalline materials. It has been designed to treat coupled chemical, mechanical, vibrational, and magnetic degrees of freedom to determine ground state and finite temperature properties of crystals. The symmetry of the underlying parent crystal structure is used to enumerate perturbations of the parent crystal structure and generate derivative structures which can be input to first-principles calculations in order to explore the ground state energy landscape. CASM algorithmically constructs cluster expansions that fully couple discrete and continuous degrees of freedom, and generates highly efficient code to evaluate the cluster expansion basis functions. Widely used machine learning methods are integrated for fitting expansion coefficients to first-principle calculations. The fully parameterized cluster expansions can be combined with (kinetic) Monte Carlo methods to calculate finite temperature thermodynamic and kinetic properties. CASM Alloy Manager identifies distinct parent crystal structures in an alloy system, creating individual projects for each, and integrating the results. The integrated infrastructure facilitates the linkage between first-principles statistical mechanics predictions with higher length scale computational methods, such as phase field simulations. In conclusion, CASM projects are designed to be easy to share in repositories, to re-use, and to extend to include additional chemical species or types of degrees of freedom.

36 MATERIALS SCIENCE↗

Liquid-like thermal conduction in intercalated layered crystalline solids

As a generic property, all substances transfer heat through microscopic collisions of constituent particles. A solid conducts heat through both transverse and longitudinal acoustic phonons, but a liquid employs only longitudinal vibrations. As a result, a solid is usually thermally more conductive than a liquid. In canonical viewpoints, such a difference also serves as the dynamic signature distinguishing a solid from a liquid. Here in this work, we report liquid-like thermal conduction observed in the crystalline AgCrSe 2 . The transverse acoustic phonons are completely suppressed by the ultrafast dynamic disorder while the longitudinal acoustic phonons are strongly scattered but survive, and are thus responsible for the intrinsically ultralow thermal conductivity. This scenario is applicable to a wide variety of layered compounds with heavy intercalants in the van der Waals gaps, manifesting a broad implication on suppressing thermal conduction. Finally, these microscopic insights might reshape the fundamental understanding on thermal transport properties of matter and open up a general opportunity to optimize performances of thermoelectrics.

36 MATERIALS SCIENCE↗