Search NASA⌕ Search

SEARCH · Search NASA

Results for “data rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

High rate data acquisition from Spacelab/Shuttle

The need for high data rates from a variety of experiments on Spacelab/Shuttle produced the requirement for the Spacelab High Rate Multiplexer/Demultiplexer system. This system acquires serial digital data at asynchronous bit rates from up to sixteen experiments, two data buses, three voice links, two tape recorders, and a universal time channel. Experiment data rates may vary from 200 bps to 16 Mbps while recorded data rates range from 250 Kbps to 32 Mbps. The High Rate Multiplexer (HRM) accepts these data inputs and forms a serial PCM output at flexible rates up to 48 Mbps. This PCM output is transmitted to ground by a Ku-Band RF link via the Tracking and Data Relay Satellite System (TDRSS) or recorded on board for delayed transmission. A complementary ground based High Rate Demultiplexer (HRDM) accepts and demultiplexes the composite PCM data at ground processing locations.

Coffey, R.↗

High rate data systems

The characteristics of the high resolution imaging spectrometer (HIRIS) and the synthetic aperture radar (SAR) are described with consideration given to the source of their high data rates. A functional-level description of the end-to-end data flow for HIRIS and SAR is provided. Attention is also given to major technological challenges that must be met in achieving an implementation of the system. Management issues associated with high rate, high volume data are also discussed.

Miller, Richard B.↗

A coherent digital demodulator for multiple signal formats and widely varying data rates

The Tracking and Data Relay Satellite System (TDRSS) uses four ground station demodulators for K-band signals with data rates from 1 kb/s to 300 Mb/s. The author discusses the feasibility of replacing these demodulators with a single digital demodulator that may be reconfigured by altering stored parameters to accommodate all signal formats and data rates. This implementation will reduce total ground station cost and facilitate automation of ground station operation. Analysis of system performance concentrates on the carrier tracking loop. Analytic and simulation results relate system performance to parameter values and signal format as data rate and power vary independently on the In-phase and quadrature channels. It is demonstrated that a single digital demodulator can support TDRSS-compatible signals at data rates conservatively extending from 1K symbols/s to 10M symbols/s, using off-the-shelf hardware with 6 or more bits of accuracy.

Mcguffin, Bruce F.↗

High Data Rate Instrument Study

The High Data Rate Instrument Study was a joint effort between the Jet Propulsion Laboratory (JPL) and the Goddard Space Flight Center (GSFC). The objectives were to assess the characteristics of future high data rate Earth observing science instruments and then to assess the feasibility of developing data processing systems and communications systems required to meet those data rates. Instruments and technology were assessed for technology readiness dates of 2000, 2003, and 2006. The highest data rate instruments are hyperspectral and synthetic aperture radar instruments which are capable of generating 3.2 Gigabits per second (Gbps) and 1.3 Gbps, respectively, with a technology readiness date of 2003. These instruments would require storage of 16.2 Terebits (Tb) of information (RF communications case of two orbits of data) or 40.5 Tb of information (optical communications case of five orbits of data) with a technology readiness date of 2003. Onboard storage capability in 2003 is estimated at 4 Tb; therefore, all the data created cannot be stored without processing or compression. Of the 4 Tb of stored data, RF communications can only send about one third of the data to the ground, while optical communications is estimated at 6.4 Tb across all three technology readiness dates of 2000, 2003, and 2006 which were used in the study. The study includes analysis of the onboard processing and communications technologies at these three dates and potential systems to meet the high data rate requirements. In the 2003 case, 7.8% of the data can be stored and downlinked by RF communications while 10% of the data can be stored and downlinked with optical communications. The study conclusion is that only 1 to 10% of the data generated by high data rate instruments will be sent to the ground from now through 2006 unless revolutionary changes in spacecraft design and operations such as intelligent data extraction are developed.

Schober, Wayne↗

Frame synchronization for a channel with different data rates

In some communication links, different data rates are used at different times on the same channel and each is assigned a separate frame synchronization (sync) marker. The frame search is completed within a finite number of frame intervals once both phase-lock and bit-sync are achieved because the incoming data rate can change. The probability of failure to frame-lock, and an upper bound of probability of false frame-lock in a frame search mode are derived for a communication link with a 10 to the -5th bit error probability. The probability of failure to detect data-rate change and the probability of false detection of data-rate change in a frame-lock mode are discussed. In a frame-lock mode, the probability of failure to detect data-rate change and probability detection of data-rate change an equal to 4.96 x 10 to the -12th. A frame-lock device can be used for the Space Station Freedom Ku-band return link.

Kwon, Hyuck M.↗

High-data-rate, spacecraft tape recorders.

Description of magnetic head designs, tape transport features, encoding techniques, bit error rates, and data rate capabilities of tape recorders used on board satellites for temporary storage of sensor data. Helical- and transverse-scan rotary head mechanisms used for wideband video signals from imaging systems are explained along with associated electronic circuitry. Decoding and decision procedures employed in multiple-track recorders are outlined, and deskewing electronics are discussed.

Thompson, C. R.↗

Promoted Combustion Test Propagation Rate Data

Combustion propagation rate data were examined for potential use in benchmarking a thermal model of the Promoted Combustion Test (PCT), and also for potential use in measuring the repeatability of PCT results.

Borstorff, J.↗

On the Performance of Adaptive Data Rate over Deep Space Ka-Bank Link: Case Study Using Kepler Data

Future missions envisioned for both human and robotic exploration demand increasing communication capacity through the use of Ka-band communications. The Ka-band channel, being more sensitive to weather impairments, presents a unique trade-offs between data storage, latency, data volume and reliability. While there are many possible techniques for optimizing Ka-band operations such as adaptive modulation and coding and site-diversity, this study focus exclusively on the use of adaptive data rate (ADR) to achieve significant improvement in the data volume-availability tradeoff over a wide range of link distances for near Earth and Mars exploration. Four years of Kepler Ka-band downlink symbol signal-to-noise (SNR) data reported by the Deep Space Network were utilized to characterize the Ka-band channel statistics at each site and conduct various what-if performance analysis for different link distances. We model a notional closed-loop adaptive data rate system in which an algorithm predicts the channel condition two-way light time (TWLT) into the future using symbol SNR reported in near-real time by the ground receiver and determines the best data rate to use. Fixed and adaptive margins were used to mitigate errors in channel prediction. The performance of this closed-loop adaptive data rate approach is quantified in terms of data volume and availability and compared to the actual mission configuration and a hypothetical, optimized single rate configuration assuming full a priori channel knowledge.

Gao, Jay L.↗

A pseudo-noise transponder design for low data rate users of the tracking and data relay satellite system

A compromise optimum design for the low data rate users of the Tracking and Data Relay Satellite System (TDRSS) is presented. Design goals for the TDRSS are employed in this report to arrive at the transponder design. Multipath, R.F.I., antenna pattern anomolies, other user signals, and other definable degrading factors are included as trade-off parameters in the design. Synchronization, emergency voice, user stabilization, polarization diversity and error control coding are also considered and their impact on the transponder design is evaluated.

Birch, J. N.↗

Adaptive data rate SSMA system for personal and mobile satellite communications

An adaptive data rate SSMA (spread spectrum multiple access) system is proposed for mobile and personal multimedia satellite communications without the aid of system control earth stations. This system has a constant occupied bandwidth and has variable data rates and processing gains to mitigate communication link impairments such as fading, rain attenuation and interference as well as to handle variable data rate on demand. Proof of concept hardware for 6MHz bandwidth transponder is developed, that uses offset-QPSK (quadrature phase shift keying) and MSK (minimum shift keying) for direct sequence spread spectrum modulation and handle data rates of 4k to 64kbps. The RS422 data interface, low rate voice and H.261 video codecs are installed. The receiver is designed with coherent matched filter technique to achieve fast code acquisition, AFC (automatic frequency control) and coherent detection with minimum hardware losses in a single matched filter circuit. This receiver structure facilitates variable data rate on demand during a call. This paper shows the outline of the proposed system and the performance of the prototype equipment.

Ikegami, Tetsushi↗

Data-Rate Estimation for Autonomous Receiver Operation

In this article, we present a series of algorithms for estimating the data rate of a signal whose admissible data rates are integer base, integer powered multiples of a known basic data rate. These algorithms can be applied to the Electra radio currently used in the Deep Space Network (DSN), which employs data rates having the above relationship. The estimation is carried out in an autonomous setting in which very little a priori information is assumed. It is done by exploiting an elegant property of the split symbol moments estimator (SSME), which is traditionally used to estimate the signal-to-noise ratio (SNR) of the received signal. By quantizing the assumed symbol-timing error or jitter, we present an all-digital implementation of the SSME which can be used to jointly estimate the data rate, SNR, and jitter. Simulation results presented show that these joint estimation algorithms perform well, even in the low SNR regions typically encountered in the DSN.

Tkacenko, A.↗

Rain-rate data base development and rain-rate climate analysis

The single-year rain-rate distribution data available within the archives of Consultative Committee for International Radio (CCIR) Study Group 5 were compiled into a data base for use in rain-rate climate modeling and for the preparation of predictions of attenuation statistics. The four year set of tip-time sequences provided by J. Goldhirsh for locations near Wallops Island were processed to compile monthly and annual distributions of rain rate and of event durations for intervals above and below preset thresholds. A four-year data set of tropical rain-rate tip-time sequences were acquired from the NASA TRMM program for 30 gauges near Darwin, Australia. They were also processed for inclusion in the CCIR data base and the expanded data base for monthly observations at the University of Oklahoma. The empirical rain-rate distributions (edfs) accepted for inclusion in the CCIR data base were used to estimate parameters for several rain-rate distribution models: the lognormal model, the Crane two-component model, and the three parameter model proposed by Moupfuma. The intent of this segment of the study is to obtain a limited set of parameters that can be mapped globally for use in rain attenuation predictions. If the form of the distribution can be established, then perhaps available climatological data can be used to estimate the parameters rather than requiring years of rain-rate observations to set the parameters. The two-component model provided the best fit to the Wallops Island data but the Moupfuma model provided the best fit to the Darwin data.

Crane, Robert K.↗

Communication satellite ground station receiver performance at low data rates

Performance of satellite ground station receivers at low data rates is analyzed for power-limited satellites, when various amounts of frequency dynamics are present. Specifically, the lowest data rates for which the receiver can successfully demodulate suppressed-carrier BPSK data under a wide variety of conditions are determined. Minimum data rates on the order of 100 to 1400 bits per second are achievable with a bit error probability less than 0.00001 and with a mean time to cycle slip on the order of 1/2 hour or more, when Costas loops are employed for carrier extraction.

Riddle, L. P.↗

DVB-S2 Demonstration Testing for Enhancing Data Rates for CubeSat/SmallSat Missions

The number of National Aeronautics and Space Administration (NASA) CubeSat/SmallSat missions is expected to grow rapidly in the next decade. High data rate is in increasing demanded for science missions, especially for mother/daughter CubeSat constellations. As the number of spacecraft on a ground network grows, loading could be reduced by limiting contact time per day, which is enabled by higher data rates. There is also a need to communicate direct to earth from space from longer distances than low earth orbit (LEO) with CubeSats. These challenges motivate the need for bandwidth and power efficient modulation and coding techniques. Today, DVB-S2 is an industry communications standard for larger satellites. DVB-S2 uses power and bandwidth efficient modulation and coding techniques to deliver performance approaching theoretical limits of RF channels. NASA Near Earth Network (NEN) is conducting demonstration testing at Wallops Flight Facility (WFF) in spring 2019 for CubeSat/SmallSat missions for enhancing data rate performance in NASAs allocated S-band 5 MHz channel. The ultimate goal is to upgrade NEN with DVB-S2 for increasing science data return, and enabling of greater numbers of CubeSats.This paper describes NEN DVB-S2 demonstration testing objectives and performance measurement results. DVB-S2 data rate performance in the NEN S-band 5 MHz channel is presented. Simulation analysis for the expected maximum data rate performance with the DVB-S2 signal family including multiple modulations and codes are presented. Link margin analysis for a typical CubeSat/SmallSat with a 1W/2W power amplifier/patch antenna using DVB-S2 for NEN S-band is discussed. The demonstration testing configurations at NEN Wallops station is described. Results of the demonstration testing are compared with other evolving radios for SmallSats and CubeSats in term of data rate and performance. There are a number of evolving S-band and X-band radios that are compatible with NEN. Some are integrated with commercial CubeSat/SmallSat busses. Some are flying for the first time with NEN in early 2019. The USRP B200mini transceiver S-band radio is one such radio. Results of streamlined compatibility testing with NEN in 2018, performance with the Technology Educational Satellite (TechEdSat-8) in flight in early 2019, potential to add DVB-S2 to the radio, and plans for a CubeSat using the radio for communication from 10 million kilometers from earth are discussed. Another evolving radio is the Syrlinks X-band radio. Results of compatibility testing with NEN in 2018, performance with the Sustained Ocean Color Observations using Nanosatellites (SOCON) in flight in early 2019, and potential for a future SOCON constellation are discussed.

Wong, Yen↗

Generation of Data-Rate Profiles of Ka-Band Deep-Space Links

A short report discusses a methodology for designing Ka-band Deep-Space-to- Earth radio-communication links. This methodology is oriented toward minimizing the effects of weather on the Ka-band telecommunication link by maximizing the expected data return subject to minimum link availability and a limited number of data rates. This methodology differs from the current standard practices in which a link is designed according to a margin policy for a given link availability at 10 elevation. In this methodology, one chooses a data-rate profile that will maximize the average data return over a pass while satisfying a minimum-availability requirement for the pass, subject to mission operational limitations expressed in terms of the number of data rates used during the pass. The methodology is implemented in an intelligent search algorithm that first finds the allowable data-rate profiles from the mission constraints, spacecraft-to-Earth distance, spacecraft EIRP (effective isotropic radiated power), and the applicable zenith atmospheric noise temperature distribution, and then selects the best data rate in terms of maximum average data return from the set of allowable data-rate profiles.

Shambayati, Shervin↗

Rate data encoder

An apparatus and technique for encoding rate data is described. The expected range of the rate data is determined and the data falling within that range is encoded by conventional digital techniques. If the data falls either below or above the range, the encoding is stopped and signals are transmitted indicating that the data is not within the expected range.

Sivertson, W. E., Jr.↗

Modelling high data rate communication network access protocol

Modeling of high data rate communication systems is different from the low data rate systems. Three simulations were built during the development phase of Carrier Sensed Multiple Access/Ring Network (CSMA/RN) modeling. The first was a model using SIMCRIPT based upon the determination and processing of each event at each node. The second simulation was developed in C based upon isolating the distinct object that can be identified as the ring, the message, the node, and the set of critical events. The third model further identified the basic network functionality by creating a single object, the node which includes the set of critical events which occur at the node. The ring structure is implicit in the node structure. This model was also built in C. Each model is discussed and their features compared. It should be stated that the language used was mainly selected by the model developer because of his past familiarity. Further the models were not built with the intent to compare either structure or language but because the complexity of the problem and initial results contained obvious errors, so alternative models were built to isolate, determine, and correct programming and modeling errors. The CSMA/RN protocol is discussed in sufficient detail to understand modeling complexities. Each model is described along with its features and problems. The models are compared and concluding observations and remarks are presented.

Khanna, S.↗