Search NASA⌕ Search

SEARCH · Search NASA

Results for “data reconciliation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The utility of Bayesian data reconciliation for separations

Data reconciliation methods for separation processes typically rely on classical statistical approaches to generate estimates of true mass flow rates from measurements. Knowledge regarding the uncertainty of these estimates has value in decision making, but is often not acquired. Bayesian approaches intrinsically quantify uncertainty; however, literature for Bayesian data reconciliation of separation processes is scarce. This publication outlines two Bayesian data reconciliation models and provides details for how the models were implemented for the BayesMassBal (V 1.0.0) software package written in R. To demonstrate the advantages of this approach for data reconciliation, the models were first applied to simulated data and then compared to a classical model through a Monte Carlo experiment. In this example, the Bayesian models were found to provide more accurate estimates of the simulated data, while also providing quantitative information on the estimate uncertainty. To demonstrate the use of the technique in a practical problem, the models were also applied to real data collected from a pilot-scale rare earth solvent extraction process. Here, this publication provides a small window into how Bayesian methods can be used for data reconciliation, but findings suggest Bayesian data reconciliation models for separation processes have distinct advantages over classical alternatives.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2019

Dynamic Data Reconciliation and Validation of a Dynamic Model for Solvent-Based CO 2 Capture Using Pilot-Plant Data

This paper is focused on the development and validation of a dynamic model for an MEA-based CO 2 capture unit. Starting with a rigorous steady-state process model, the dynamic model is developed in Aspen Plus Dynamics ® using a modified Murphree-efficiency approach and is validated using dynamic data collected from the National Carbon Capture Center (NCCC) in Wilsonville, Alabama. The dynamic test runs were designed with due consideration of process excitation and process nonlinearities constrained by the available time to conduct the test runs and implement the experimental designs in the plant control system. The experimental data include solvent composition and loading. Since the experimental data were found to violate mass and energy balances, filtering algorithms coupled with dynamic data reconciliation techniques were used. Without adjusting any model parameters, the dynamic model satisfactorily predicted dynamic response of CO 2 capture due to step changes in the solvent flowrate, flue gas flowrate, and steam flowrates. Transient studies show that the process gain and time constants can considerably change depending on the direction of the disturbance or manipulated variables, indicating process nonlinearities. Due to a storage tank between the absorber and stripper, the time constant of the full plant can be considerably longer than the time constants of the absorber or stripper individually. Furthermore, impact of the control system on the process efficiency while following an optimal CO 2 capture schedule was also studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Dynamic Modeling, Parameter Estimation, and Data Reconciliation of a Supercritical Pulverized Coal-Fired Boiler

A high-fidelity, spatially distributed dynamic model of a supercritical pulverized coal-fired boiler was developed for calculating transient thermal profiles of the boiler tubes, which are often not measured or unmeasurable in industrial settings due to the harsh operating conditions. In this work, rigorous models of the subcritical and supercritical steam properties, which can be highly nonlinear, were used to capture the transition between two-phase and one-phase flow, respectively, as supercritical boilers frequently transition through the critical point during load-following operation. The transient boiler model was also used for data reconciliation and parameter estimation for the purpose of model validation against industrial data. An approach was developed to reduce the size of large-scale reconciliation problem by focusing on the implementation of bias terms for the reconciled variables, which can be estimated in place of the reconciled variables themselves. In addition, a functional approximation of the reconciliation problem was defined so that it can be more simply optimized. Combining this functional approximation optimization with reformulation of the reconciliation problem considering measurement biases can significantly improve the tractability of many such large-scale problems. The validated boiler model was then used to study transient responses under load-following operation with specific attention on the calculation of unmeasurable variables.

42 ENGINEERING↗
DOE OSTI2026

Microwave-Assisted Plastic Upcycling: Dynamic Data Reconciliation, Parameter Estimation, and Kinetic Modeling

Microwave (MW)-assisted catalytic pyrolysis offers a promising pathway for efficient plastic upcycling. This work develops an integrated modeling framework combining dynamic data reconciliation, a temperature-dependent rate model, and a yield model to represent the time-varying production rate of components in MW-assisted LDPE pyrolysis conducted in a batch reactor. An Arrhenius-type rate model with a temperature-dependent reaction order is developed. A biexponential correlation is proposed for the yield of gaseous products that enables to capture the evolving product formation behavior during conversion. In the yield correlation, one term is used to represent the initial increase in yield, reflecting the rapid formation of intermediate or primary products at the early stages of the reaction when a larger fraction of the reactant remains available. As conversion progresses, the influence of this term gradually diminishes. The other term accounts for the subsequent decrease in the predicted yield, representing secondary reactions such as further cracking or coke formation that reduce the concentration of certain products at higher conversion. The model is found to accurately represent reconciled experimental flow rate profiles from an in-house MW-assisted catalytic batch reactor for major products, including ethylene, ethane, 1-butene, and benzene, across 250−350 °C. Ethylene remains the dominant product but decreases from about 41.95% at 250 °C to 30.14% at 350 °C, while heavier products increase significantly, with 1-butene rising to nearly 8.37% and benzene reaching 2.17% at intermediate temperatures. The model shows that the ethylene production rate can be maximized at around 270 °C. The models developed in this work can be utilized for process optimization, reactor design and scale-up of microwave-assisted plastic conversion technologies, and economic analysis.

Damahe, Harish [West Virginia Univ., Morgantown, W↗
DOE OSTI2018

Redefining the Practice of Peer Review Through Intelligent Automation—Part 3: Automated Report Analysis and Data Reconciliation

One method for addressing existing peer review limitations is the assignment of peer review cases on a completely blinded basis, in which the peer reviewer would create an independent report which can then be cross-referenced with the primary reader report of record. By leveraging existing computerized data mining techniques, one could in theory automate and objectify the process of report data extraction, classification, and analysis, while reducing time and resource requirements intrinsic to manual peer review report analysis. Once inter-report analysis has been performed, resulting inter-report discrepancies can be presented to the radiologist of record for review, along with the option to directly communicate with the peer reviewer through an electronic data reconciliation tool aimed at collaboratively resolving inter-report discrepancies and improving report accuracy. All associated report and reconciled data could in turn be recorded in a referenceable peer review database, which provides opportunity for context and user-specific education and decision support.

42 ENGINEERING↗
DOE OSTI2019

Freeway Loop Detector Data Reconciliation Based on Vehicle Conservation

Loop detector is the most common source of traffic flow measurements on freeways. Though being a mature technology, loop detector is prone to miscounts even when it is properly deployed and adjusted. If a loop detectors systematically over- or under-counts, the estimation based on vehicle conservation leads to results that are not physically plausible such as negative density or density higher than the jam-density. Here we propose an optimization-based method in which plausible values of accumulation is guaranteed through explicit constraints. Compared to similar methods, the proposed method distinct in the following: (i) the optimization problem is convex therefore leads to shorter computational time; (ii) occupancy is also taken into account in order to estimate upper and lower bounds in the accumulation between stations; (iii) no modifications are required when data from one or multiple lanes are missing. The method is first validated using micro-simulation by disturbing the loop-detector from micro-simulation, applying the method and then comparing the results with the ground truth data. The results show the method is able to capture the average counts almost exactly while providing estimate of density with satisfactory accuracy. The method is also successfully applied in a scenario in which field-data is available.

data reconciliation↗
DOE OSTI2021

Santa Barbara Desalination Digital Twin Technical Report

A digital twin is a computer model that has sufficient breadth and fidelity to enable diagnostic and predictive analyses for outputs of interest. We have constructed a digital twin of the SB desal plant using the ProteusLib software developed for NAWI under task 4.2.2, and specifically the ProteusLib models of pumps, filters, mixers, splitters, and reverse osmosis units and a seawater property model. The steps needed to configure this digital twin with the real conditions of the SB desal plant are: (1) Data reconciliation, which is gathering the data and plant connectivity and ensure that all relevant values are present and in the correct units and validating the data using material and energy balances, and correct for errors, gaps, or deviations; (2) Parameter estimation, which is matching model parameters with data from previous step, filling missing parameters with initial estimates, then iteratively refining estimated values. Once we completed the digital twin, we used the optimization capabilities of ProteusLib to compute outputs of interest over a chosen range of inputs. The primary output of interest to the owners of the plant is its specific energy consumption (kWh/acre-foot). The remainder of this report will provide more detail on the data reconciliation, parameter estimation, and analyses we performed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2014

Sample preparation and biomass determination of SRF model mixture using cryogenic milling and the adapted balance method

Highlights: • An alternative sample comminution procedure for SRF is tested. • Proof of principle is shown on a SRF model mixture. • The biogenic content of the SRF is analyzed with the adapted balance method. • The novel method combines combustion analysis and a data reconciliation algorithm. • Factors for the variance of the analysis results are statistically quantified. - Abstract: The biogenic fraction of a simple solid recovered fuel (SRF) mixture (80 wt% printer paper/20 wt% high density polyethylene) is analyzed with the in-house developed adapted balance method (aBM). This fairly new approach is a combination of combustion elemental analysis (CHNS) and a data reconciliation algorithm based on successive linearisation for evaluation of the analysis results. This method shows a great potential as an alternative way to determine the biomass content in SRF. However, the employed analytical technique (CHNS elemental analysis) restricts the probed sample mass to low amounts in the range of a few hundred milligrams. This requires sample comminution to small grain sizes (<200 μm) to generate representative SRF specimen. This is not easily accomplished for certain material mixtures (e.g. SRF with rubber content) by conventional means of sample size reduction. This paper presents a proof of principle investigation of the sample preparation and analysis of an SRF model mixture with the use of cryogenic impact milling (final sample comminution) and the adapted balance method (determination of biomass content). The so derived sample preparation methodology (cutting mills and cryogenic impact milling) shows a better performance in accuracy and precision for the determination of the biomass content than one solely based on cutting mills. The results for the determination of the biogenic fraction are within 1–5% of the data obtained by the reference methods, selective dissolution method (SDM) and {sup 14}C-method ({sup 14}C-M)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Heat Loss Characteristics and Energy Use of Piperazine with the Advanced Stripper (PZAS) at the UT-SRP Pilot Plant

Heat duty and heat loss were measured at the pilot plant at UT Austin. Heat loss was measured with energy balances using water. Heat loss was studied using surface temperature measurements over 68 different locations at the pilot plant. Surface temperature measurements indicated that bare metal surfaces were the primary source of heat loss from the pilot plant. Heat loss from bare metal surfaces was at least 50% controlled by natural convection and in many cases was as high as 75% natural convection controlled. Measured heat loss at the pilot plant was 20100 BTU/hr and overall heat loss did not show any dependence on the heat rate of the plant. Compared to PZAS™ at the National Carbon Capture Center, heat loss relative to heat rate was higher at 38%. The relative heat loss at the pilot plants was found to decrease by 20% per MW of added capacity. Measured net heat duty was found to be dependent on measured lean loading and cold rich bypass flow rate. Measured net heat duty was between 2.2 and 2.4 GJ/tonne at an optimum lean loading of 0.2–0.21 mol/mol. Data reconciliation by Aspen Plus® Data Fit™ underpredicted CO2 flow rate by 20% due to an overprediction of lean loading by 19%, indicating a necessary change in thermodynamic parameters in the model. This resulted in an over prediction of heat duty by 33% on average.

Amine scrubbing, stripper, energy requirement, hea↗
DOE OSTI2025

Design of Experiments for Dynamic Test Runs in Solvent-Based CO 2 Capture Pilot Plants

Test runs in the pilot plants consume significant resources, and therefore, the learning from test runs should be maximized. Test runs conducted in the pilot plants are often steady state. It takes several hours for reaching steady-state in the pilot plants, and thus, the duration of the test runs needs to be long even for collecting few steady-state data points. On the other hand, a large number of measurements can be collected through dynamic test runs in a short span of time. This paper presents a systematic design of dynamic experiments (DoDEs) for identifiability of model parameters, which is achieved by persistently exciting the inputs signals. A pseudorandom binary sequence (PRBS) is designed as the input signal for DoDE due to its efficiency in obtaining sufficient spectral content. However, due to the long sequence size of the PRBS signal, a Schroeder-phase input signal, which is a multisine signal, is also designed. Tests for both types of signals are run in the Pilot Solvent Test Unit (PSTU) at the National Carbon Capture Center in Wilsonville, Alabama. The transient data are used to solve dynamic data reconciliation and parameter estimation problem. The estimated parameters are found to be not only superior to those estimated from using data collected from hundreds of steady-state test runs in a nonreactive (air–water) system, but the parameters could be estimated by using the dynamic data collected for about 24 h from the pilot plant for the MEA-H 2 O–CO 2 system.

CO2 capture↗
DOE OSTI2016

Reconstruction of the regulatory network for Bacillus subtilis and reconciliation with gene expression data

Here, we introduce a manually constructed and curated regulatory network model that describes the current state of knowledge of transcriptional regulation of B. subtilis . The model corresponds to an updated and enlarged version of the regulatory model of central metabolism originally proposed in 2008. We extended the original network to the whole genome by integration of information from DBTBS, a compendium of regulatory data that includes promoters, transcription factors (TFs), binding sites, motifs and regulated operons. Additionally, we consolidated our network with all the information on regulation included in the SporeWeb and Subtiwiki community-curated resources on B. subtilis . Finally, we reconciled our network with data from RegPrecise, which recently released their own less comprehensive reconstruction of the regulatory network for B. subtilis . Our model describes 275 regulators and their target genes, representing 30 different mechanisms of regulation such as TFs, RNA switches, Riboswitches and small regulatory RNAs. Overall, regulatory information is included in the model for approximately 2500 of the ~4200 genes in B. subtilis 168. In an effort to further expand our knowledge of B. subtilis regulation, we reconciled our model with expression data. For this process, we reconstructed the Atomic Regulons (ARs) for B. subtilis , which are the sets of genes that share the same “ON” and “OFF” gene expression profiles across multiple samples of experimental data. We show how atomic regulons for B. subtilis are able to capture many sets of genes corresponding to regulated operons in our manually curated network. Additionally, we demonstrate how atomic regulons can be used to help expand or validate the knowledge of the regulatory networks by looking at highly correlated genes in the ARs for which regulatory information is lacking. During this process, we were also able to infer novel stimuli for hypothetical genes by exploring the genome expression metadata relating to experimental conditions, gaining insights into novel biology.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1985

DE-1 phase 3 extended mission data analysis of Dynamics Explorer retarding ion mass spectrometer flight data

Field-aligned motion of ionospheric ions at a low altitudes and different pitch angle distributions of ionospheric ions at high altitudes were studied. The objective is twofold: (1) to discover the degree to which observations made by Dynamics Explorer 1 (DE-1) and DE-2 agree when taken in the same ionospheric volume; (2) to understand the processes operating along a magnetic field tube connecting DE-1 and DE-2 that allow a reconciliation of the two data sets. A second investigation has two facets; to reconcile the observed occurrence of ionospheric ions at high altitudes with a point source injection in the ionosphere and subsequent E x B drift, and to reconcile the observed fluxes of ionospheric ions at high altitudes with the measured upward flux at low altitudes. An understanding of the effects of E x B drift molten on the dispersion of ionospheric ions is attained.

Source record↗
NASA NTRS1993

Space Shuttle Main Engine performance analysis

For a number of years, NASA has relied primarily upon periodically updated versions of Rocketdyne's power balance model (PBM) to provide space shuttle main engine (SSME) steady-state performance prediction. A recent computational study indicated that PBM predictions do not satisfy fundamental energy conservation principles. More recently, SSME test results provided by the Technology Test Bed (TTB) program have indicated significant discrepancies between PBM flow and temperature predictions and TTB observations. Results of these investigations have diminished confidence in the predictions provided by PBM, and motivated the development of new computational tools for supporting SSME performance analysis. A multivariate least squares regression algorithm was developed and implemented during this effort in order to efficiently characterize TTB data. This procedure, called the 'gains model,' was used to approximate the variation of SSME performance parameters such as flow rate, pressure, temperature, speed, and assorted hardware characteristics in terms of six assumed independent influences. These six influences were engine power level, mixture ratio, fuel inlet pressure and temperature, and oxidizer inlet pressure and temperature. A BFGS optimization algorithm provided the base procedure for determining regression coefficients for both linear and full quadratic approximations of parameter variation. Statistical information relative to data deviation from regression derived relations was also computed. A new strategy for integrating test data with theoretical performance prediction was also investigated. The current integration procedure employed by PBM treats test data as pristine and adjusts hardware characteristics in a heuristic manner to achieve engine balance. Within PBM, this integration procedure is called 'data reduction.' By contrast, the new data integration procedure, termed 'reconciliation,' uses mathematical optimization techniques, and requires both measurement and balance uncertainty estimates. The reconciler attempts to select operational parameters that minimize the difference between theoretical prediction and observation. Selected values are further constrained to fall within measurement uncertainty limits and to satisfy fundamental physical relations (mass conservation, energy conservation, pressure drop relations, etc.) within uncertainty estimates for all SSME subsystems. The parameter selection problem described above is a traditional nonlinear programming problem. The reconciler employs a mixed penalty method to determine optimum values of SSME operating parameters associated with this problem formulation.

Santi, L. Michael↗
DOE OSTI2025

Leveraging Radiofrequency Identification Success Beyond Hazardous Material Inventory Management at a National Laboratory

Effective inventory management can be overshadowed by conflicting priorities in organizational procedures, particularly in research-focused institutions such as national laboratories that handle expensive, delicate, and hazardous materials. Here, this study investigated the potential of radiofrequency identification (RFID) technology, currently used for hazardous chemical inventory, in applications with higher metal interference and absorption, specifically pressure release device (PRD) compliance and nuclear container management, at Lawrence Livermore National Laboratory (LLNL). This study was done to document best practices to enhance inventory identification speeds for inventory reconciliation and inventory recall and to explore optimal configurations for RFID implementation compared to traditional manual methods of equipment management. Tests were conducted to determine the ideal RFID tag orientation (read at angles of 0°, 90°, and 270°), various container layouts (linear, separated, curved, operational), and ID methods such as manual, barcode, and RFID performing three trials per method per orientation. Results indicated that 0° was the optimal read angle for minimizing metallic interference, and the operational and curved arrangements significantly outperformed the linear and separated configurations in read speed. 3D printed mounts were developed and tested, increasing the read range of the RFID reader by up to 235% in cases of high metallic interference. The RFID technology demonstrated an average speed increase of 65% over a simplified manual identification, which supports the conclusion that RFID is a more efficient method for large hazardous inventory management and equipment reconciliation. Additionally, capturing meta-data, such as location and date, can be used to query for inventory recall and automated updating of record information.

42 ENGINEERING↗
NASA NTRS1993

Integrated model development for liquid fueled rocket propulsion systems

As detailed in the original statement of work, the objective of phase two of this research effort was to develop a general framework for rocket engine performance prediction that integrates physical principles, a rigorous mathematical formalism, component level test data, system level test data, and theory-observation reconciliation. Specific phase two development tasks are defined.

Santi, L. Michael↗