Investigation of surface Rayleigh wave response with simulated defects
Investigation of surface Rayleigh wave response with simulated defects
Source record↗
SEARCH · Search NASA
Results for “defects simulation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Prediction and Verification of Ductile Crack Growth from Simulated Defects in Strength Overmatched Butt Welds
Defects that develop in welds during the fabrication process are frequently manifested as embedded flaws from lack of fusion or lack of penetration. Fracture analyses of welded structures must be able to assess the effect of such defects on the structural integrity of weldments; however, the transferability of R-curves measured in laboratory specimens to defective structural welds has not been fully examined. In the current study, the fracture behavior of an overmatched butt weld containing a simulated buried, lack-of-penetration defect is studied. A specimen designed to simulate pressure vessel butt welds is considered; namely, a center crack panel specimen, of 1.25 inch by 1.25 inch cross section, loaded in tension. The stress-relieved double-V weld has a yield strength 50% higher than that of the plate material, and displays upper shelf fracture behavior at room temperature. Specimens are precracked, loaded monotonically while load-CMOD measurements are made, then stopped and heat tinted to mark the extent of ductile crack growth. These measurements are compared to predictions made using finite element analysis of the specimens using the fracture mechanics code Warp3D, which models void growth using the Gurson-Tvergaard dilitant plasticity formulation within fixed sized computational cells ahead of the crack front. Calibrating data for the finite element analyses, namely cell size and initial material porosities are obtained by matching computational predictions to experimental results from tests of welded compact tension specimens. The R-curves measured in compact tension specimens are compared to those obtained from multi-specimen weld tests, and conclusions as to the transferability of R-curves is discussed.
Nishioka, Owen S.↗
Unraveling the transformation pathway of the 𝛽 to 𝛾 phase transition in Ga 2 O 3 from atomistic simulations
Defect spinel 𝛾−Ga 2 O 3 is the least stable polymorph of Ga 2 O 3 , so its frequent appearance as a structural defect within or on the surface of monoclinic 𝛽−Ga 2 O 3 remains a mystery. Through first-principles calculations, we explore potential pathways for the phase transition from 𝛽−Ga 2 O 3 to 𝛾−Ga 2 O 3 , and examine two key driving forces: tensile strain and Ga deficiency. When configurational entropy contributions to phase energies are included, the 𝛾 phase becomes energetically competitive with the 𝛽 phase, with the free energy difference between these phases diminishing even further under Ga-deficient conditions. Notably, a stability crossover occurs at room temperature at high vacancy concentrations ([V$^{3−}_{Ga}$]>3%) . A simple model 𝛽 → 𝛾 transformation pathway is identified, comprising two primary reactions, that enables the formation of the 𝛾 phase via simultaneous migration of Ga atoms from tetrahedral lattice sites to octahedral interstitial positions. The transformation barriers are prohibitively large in pristine Ga 2 O 3 , but can be substantially reduced by: (1) the presence of Ga vacancies, (2) elongational strains along the crystallographic 𝑎-axis, and (3) when volumetric relaxations are possible during transformation. These results elucidate prior experimental observations, where 𝛾−Ga 2 O 3 is seen on damaged surfaces or in highly 𝑛-type 𝛽−Ga 2 O 3 environments, which support Ga deficiency and mechanical strain. The insights into the driving forces and mechanisms of 𝛾−Ga 2 O 3 formation enhance understanding of how localized strain and nonequilibrium defect concentrations may facilitate its formation from the 𝛽 phase.
Defects↗
Integrating Electromagnetic Acoustic Transducers in a Modular Robotic Gripper for Inspecting Tubular Components
Tubular structures are critical components in infrastructure such as power plants. Throughout their life, they are subjected to extreme conditions or suffer from defects such as corrosion and cracks. Although regular inspection of these components is necessary, such inspection is limited by safety-related risks and limited access for human inspection. Robots can provide a solution for automatic inspection. The main challenge, however, lies in integrating sensors for nondestructive evaluation with robotic platforms. As part of developing a versatile lizard-inspired tube inspector robot, in this study the authors propose to integrate electromagnetic acoustic transducers into a modular robotic gripper for use in automated ultrasonic inspection. In particular, spiral coils with cylindrical magnets are integrated into a novel friction-based gripper to excite Lamb waves in thin cylindrical structures. To evaluate the performance of the integrated sensors, the gripper was attached to a robotic arm manipulator and tested on pipes of different outer diameters. Two sets of tests were carried out on both defect-free pipes and pipes with simulated defects, including surface partial cracking and corrosion. The inspection results indicated that transmitted and received signals could be acquired with an acceptable signal-to-noise ratio in the time domain. Moreover, the simulated defects could be successfully detected using the integrated robotic sensing system.
Materials Science↗
Simulating charged defects at database scale
Point defects have a strong influence on the physical properties of materials, often dominating the electronic and optical behavior in semiconductors and insulators. The simulation and analysis of point defects is, therefore, crucial for understanding the growth and operation of materials, especially for optoelectronics applications. In this work, we present a general-purpose Python framework for the analysis of point defects in crystalline materials as well as a generalized workflow for their treatment with high-throughput simulations. The distinguishing feature of our approach is an emphasis on a unique, unit cell, structure-only, definition of point defects which decouples the defect definition, and the specific supercell representation used to simulate the defect. This allows the results of first-principles calculations to be aggregated into a database without extensive provenance information and is a crucial step in building a persistent database of point defects that can grow over time, a key component toward realizing the idea of a “defect genome” that can yield more complex relationships governing the behavior of defects in materials. We demonstrate several examples of the approach for three technologically relevant materials and highlight current pitfalls that must be considered when employing these methodologies as well as their potential solutions.
36 MATERIALS SCIENCE↗
A Finite Difference informed Random Walk solver for simulating radiation defect evolution in polycrystalline structures with strongly inhomogeneous diffusivity
Diffusivity of species and defects on grain boundaries is usually several orders of magnitude larger than that inside grains. Such strongly inhomogeneous diffusivity requires prohibitively high computational demands for modeling microstructural evolution. Here, this paper presents a highly-efficient numerical solver, combining the Finite Difference method and Random Walk model, designed for accurately modeling strongly inhomogeneous diffusion within polycrystalline structures. The proposed solver, termed Finite Difference informed Random Walk (FDiRW), integrates a customized Finite Difference (cFD) scheme tailored for fast diffusion along thin grain boundaries represented by a single-layer of nodes. Numerical experiments demonstrate that the FDiRW solver achieves an impressive efficiency gain of 1560x compared to traditional Finite Difference methods while maintaining accuracy, making it feasible for personal computer machines to handle diffusional systems with strongly inhomogeneous diffusivity across static polycrystalline microstructures. The model has been successfully applied to simulate radiation defect evolution, showcasing its scalability to engineering scales in both length and time dimensions.
36 MATERIALS SCIENCE↗
Time-dependent equation-of-motion coupled-cluster simulations with a defective Hamiltonian
Here simulations of laser-induced electron dynamics in a molecular system are performed using time-dependent (TD) equation-of-motion (EOM) coupled-cluster (CC) theory. The target system has been chosen to highlight potential shortcomings of truncated TD-EOM-CC methods [represented in this work by TD-EOM-CC with single and double excitations (TD-EOM-CCSD)], where unphysical spectroscopic features can emerge. Specifically, we explore driven resonant electronic excitations in magnesium fluoride in the proximity of an avoided crossing. Near the avoided crossing, the CCSD similarity-transformed Hamiltonian is defective, meaning that it has complex eigenvalues, and oscillator strengths may take on negative values. When an external field is applied to drive transitions to states exhibiting these traits, unphysical dynamics are observed. For example, the stationary states that make up the time-dependent state acquire populations that can be negative, exceed one, or even complex-valued.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Micro-beam bending of FCC bicrystals: A comparison between defect dynamics simulations and experiments
To understand the role of the grain boundary (GB) in plasticity at small scale, a concurrently coupled mesoscale plasticity model was developed to simulate micro-bending of bicrystalline micron-sized beams. By coupling dislocation dynamics (DD) with a finite element model (FEM), a novel defect dynamics model provides the means to investigate intricate interactions between dislocations and GBs under various loading conditions. Our simulations of micro-bending agree well with corresponding micro-bending experiments, and they show that mechanical response of bicrystals could have not only hardening but also softening depending on the characters of the GB. In addition, changing the location of the GB in the microbeams results in different mechanical responses; GBs located at the neutral plane show softening compared to single crystals, while inclined GBs located halfway along the length of the beam show little effect. In conclusion, simulation results could provide a clear picture on detailed dislocation-GB interactions, and quantitative resolved shear stress analysis supplemented by dislocation density distribution is used to analyze the mechanical response of bicrystalline samples.
36 MATERIALS SCIENCE↗
4D STEM Simulation of Defects in Palladium Nanoparticles
Explore the source record for details and available documents.
Robinson, David↗
Spoof Plasmon Polaritons for NDE Applications an Experimental Demonstration
NASA is exploring the use of microwave spoof plasmon polaritons to detect defects in metallic structures. This work investigates the detection of simulated defects in the form of aluminum wires as small as 1.6 mm diameter and 2mm long that are placed in a grooved aluminum test article. The inclusions simulate manufacturing defects, and the sum of the delta impedance is shown to increase with increasing volume of added metal. A threshold value of 50Ω has been proposed for defect detection. In addition to detecting defects, the technique also estimates the volume of the defect.
Microwave↗
Spoof Plasmon Sensing for NDE Application
NASA is exploring the use of microwave spoof plasmon polaritons to detect defects in metallic structures. This work investigates the detection of simulated defects in the form of aluminum wires as small as 1.6 mm diameter and 2 mm long that are placed in a grooved aluminum test article. The inclusions simulate manufacturing defects, and the sum of the delta impedance is shown to increase with increasing volume of added metal. Based on the results, a threshold value of 50Ω has been proposed for defect detection. In addition to detecting defects, the technique also estimates the volume of the defect.
Microwave↗
Defect Detection in ISC Cylinder Using Spoof Plasmon Polaritons
NASA is exploring the use of microwave spoof plasmon polaritons to detect defects in integrally stiffened cylinders. This work investigates the detection of simulated defects in the form of aluminum wires as small as 10 mm long and 3.1 mm diameter that are placed in between stiffeners of an ISC. The wires simulate manufacturing inclusions defects, and the sum of the delta impedance is shown to increase with increasing volume of added metal.
spoof↗
Accurate and rapid acoustic damage characterization in complex structures using sparse sensor networks and deep learning models
Damage diagnosis in critical components is essential for ensuring the safety and reliability of operations across industries, spanning manufacturing, aerospace, and energy. Traditional acoustic nondestructive testing methods primarily focus on detecting defects through the direct scattering of single-mode incident waves from the damage, which limit their applicability to simple structures and small inspection areas. Our earlier research demonstrated that machine learning algorithms combined with sparse sensor networks can identify critical defect signatures even from multiply scattered, multi-mode acoustic signals, indicating the potential for improved defect inspection in complex, real-world structures. In this work, we demonstrate the successful implementation of this approach in a fixed sensor configuration to rapidly and accurately detect simulated defects in a geometrically complex, real-world structure, a brake rotor hub. Three different types of defects were physically simulated on the surface of the hub, and the collected data were used to train an autoencoder-based deep learning model. Two models were tested, one using single measurements and the other using multiple measurements taking advantage of the spatial distribution of the sensor network. After training, the multi-measurement model achieved 100 % accuracy in identifying, classifying, and locating unseen, unique damages. This work illustrates the potential of the proposed method for a wide range of industrial applications.
36 MATERIALS SCIENCE↗
Lamb wave defect detection and evaluation using a fully non-contact laser system
Traditional Lamb wave structural health monitoring (SHM)/nondestructive evaluation (NDE) system employs contact type transducers such as PZT, ultrasonic transducers, and optical fibers. In application, transducer attachment and maintenance can be time and labor consuming. In addition, the use of couplant and adhesives can introduce additional materials on structures, and the interface coupling is often not well understood. To overcome these limitations, we proposed a fully non-contact NDE system by employing pulsed laser (PL) for Lamb wave actuation and scanning laser Doppler vibrometer (SLDV) for Lamb wave sensing. The proposed system is implemented on aluminum plates. The PL Lamb wave excitation is calibrated, and the optimal parameters are obtained. Lamb wave modes are then characterized through 1D wavefield analysis. With the calibrated and characterized system, defect detection and evaluation are achieved on aluminum plates with simulated defects (surfaced-bonded quartz rod, and machine milled crack) through 1D and 2D inspection in both time-space and frequency-wavenumber domains.
Ma, Zhaoyun↗
A fitting algorithm for optimizing ion implantation energies and fluences
In this work we describe a method to automatically generate an ion implantation recipe, a set of energies and fluences, to produce a desired defect density profile in a solid using the fewest required energies. We simulate defect density profiles for a range of ion energies, fit them with an appropriate function, and interpolate to yield defect density profiles at arbitrary ion energies. Given Ν energies, we then optimize a set of Ν energy-fluence pairs to match a given target defect density profile. Finally, we find the minimum Ν such that the error between the target defect density profile and the defect density profile generated by the Ν energy-fluence pairs is less than a given threshold. Inspired by quantum sensing applications with nitrogen-vacancy centers in diamond, we apply our technique to calculate optimal ion implantation recipes to create uniform-density 1 μm surface layers of 15 N or vacancies (using 4 He).
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Unraveling small-scale defects in irradiated ThO 2 using kinetic Monte Carlo simulations
Point defects and their clusters generated through irradiation can have significant impact on the physical and mechanical properties of materials. However, direct experimental visualization of these small-scale defects using high-resolution scanning transmission electron microscopy remains a challenging task. In this study, using thorium dioxide (ThO 2 ) with the fluorite structure as a model system, we demonstrate the use of ab initio basin-hopping simulations in synergy with object kinetic Monte Carlo simulations as a powerful tool for identifying small defect complexes in irradiated materials. In addition to providing quantitative insights into defect evolution in ThO 2 under irradiation, our study reveals an unexpected role of bound anti-Schottky defect clusters in mediating defect transport. Remarkably, despite their poor thermal stability against dissociation at high temperatures, the transient formation of bound anti-Schottky defects under irradiation and their subsequent migration provide the dominant mechanism for the growth of large interstitial loops that have been experimentally observed in ThO 2 .
36 MATERIALS SCIENCE↗
Imaging of Calibrated Defects in Additively Manufactured Materials: Pulsed Thermal Tomography Nondestructive Examination of Additively Manufactured Reactor Materials and Components
Additive manufacturing (AM, or 3D printing) for commercial nuclear energy applications is an emerging method for cost-efficient manufacturing aimed at replacing aging nuclear reactor parts and reducing costs for new construction. Known material flaws in AM include low-density regions consisting of non-sintered powder, which have to be detected to ensure the safety of long-term performance nuclear reactor components. Currently, limited options are available for nondestructive evaluation (NDE), either during or post manufacturing. As a solution to NDE of AM, we are developing pulsed thermal imaging which is non-contact, one-sided, and scalable to arbitrary size and shape of the AM parts. Pulsed thermography (PT) system utilizes a high intensity flash lamp to rapidly heat surface of sample, and a high sensitivity fast-frame megapixel infrared (IR) camera to capture data of surface temperature variations. The acquired data cube consists of a stack of surface temperature images taken at different times. Information about material internal defects is extracted by analyzing the data cube. This report provides results of preliminary performance evaluation of pulsed thermal imaging capability in detection of imprinted flaws in AM metallic structures. The flaws were introduced into AM parts as imprinted hemispherical low density regions, consisting of trapped un-sintered metallic powder. Specimens for developed for this study consisted of AM stainless steel 316 and Inconel 718 plates. The diameters of imprinted defects varied from 1mm to 8mm, and their depths below the plate flat surface varied between 1mm and 6mm. Pulsed thermal tomography (PTT) processes the measured data cube to obtain 3D reconstructions of material effusivity using a unique inversion algorithm developed at Argonne. PTT has been previously used in imaging of similar size flat bottom hole (FBH) simulated defects in stainless steel 316 and Inconel 718 specimens. In the study involving AM specimens, PTT imaging results have shown that 1mm-diameter defects located 1mm and 2mm below the surface of specimens were detectable. Larger size defects were detectable at greater depth. We also explored an alternative approach to detection of material flaws in PT data cube, which is using neural learning-based approach to blind source separation. Detection of small material defects requires finding features in the data cube which have signal contrast levels approaching sensitivity limit of IR camera. In this study, an optimized Neural Learning based Blind Source Separation (NLBSS) algorithm, including Principal Component Analysis (PCA), and Independent Component Analysis (ICA) is demonstrated to automatically extract principal temporal and spatial features of thermography frames to enhance flaw detection. By using the NLBSS algorithm, material internal defects can be automatically detected. Furthermore, this processing approach compensates for experimental thermal imaging artifacts, such as noise and uneven heating. By merging artificial intelligence with phtotothermics, the NDE system detects internal calibrated defects of various sizes and depths in AM nuclear-grade metallic alloys.
36 MATERIALS SCIENCE↗
Hyperstoichiometric Uranium Dioxides: Rapid Synthesis and Irradiation-Induced Structural Changes
Uranium dioxide (UO 2 ), the primary fuel for commercial nuclear reactors, incorporates excess oxygen forming a series of hyperstoichiometric oxides. Thin layers of these oxides, such as UO 2.12 , form readily on the fuel surface and influence its properties, performance, and potentially geologic disposal. This work reports a rapid and straightforward combustion process in uranyl nitrate–glycine–water solutions to prepare UO 2.12 nanomaterials and thin films. We also report on the investigation of the structural changes induced in the material by irradiation. Despite the simple processing aspects, the combustion synthesis of UO 2.12 has a sophisticated chemical mechanism involving several exothermic steps. Raman spectroscopy and single-crystal X-ray diffraction (XRD) measurements reveal the formation of a complex compound containing the uranyl moiety, glycine, H 2 O, and NO 3 – groups in reactive solutions and dried combustion precursors. Combustion diagnostic methods, gas-phase mass spectroscopy, differential scanning calorimetry (DSC), and extracted activation energies from DSC measurements show that the rate-limiting step of the process is the reaction of ammonia with nitrogen oxides formed from the decomposition of glycine and uranyl nitrate, respectively. However, the exothermic decomposition of the complex compound determines the maximum temperature of the process. In situ transmission electron microscopy (TEM) imaging and electron diffraction measurements show that the decomposition of the complex compound directly produces UO 2 . The incorporation of oxygen at the cooling stage of the combustion process is responsible for the formation of UO 2.12 . Spin coating of the solutions and brief annealing at 670 K allow the deposition of uniform films of UO 2.12 with thicknesses up to 300 nm on an aluminum substrate. Irradiation of films with Ar 2+ ions (1.7 MeV energy, a fluence of up to 1 × 10 17 ions/cm 2 ) shows unusual defect-simulated grain growth and enhanced chemical mixing of UO 2.12 with the substrate due to the high uranium ion diffusion in films. As a result, the method described in this work allows the preparation of actinide oxide targets for fundamental nuclear science research and studies associated with stockpile stewardship.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗