Search NASA⌕ Search

SEARCH · Search NASA

Results for “dependence analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Dynamic Approach to Dependency Analysis in Human Reliability Analysis: Application in a Stream Generator Tube Rupture Scenario

Dependency analysis in human reliability analysis (HRA) is a method of adjusting the failure probability of a given action by considering the impact of the action preceding it. It plays a role in reasonably accounting for human actions in the context of probabilistic safety assessments (PSAs), preventing PSA results from being estimated too optimistically based on the HRA results. Nevertheless, the existing dependency methods present a couple of challenges in that the quantification approaches rarely explain the adjustment of human error probabilities (HEPs). For this reason, the authors’ previous research has pointed out challenges of the existing dependency approaches and conceptually, theoretically proposed a performance shaping factor (PSF)-based dynamic dependency analysis method for HRA in order to complement the existing dependency methods. The current paper explores the latest version of the method and guidance for applying it to a steam generator tube rupture (SGTR) scenario.

99 GENERAL AND MISCELLANEOUS↗

Time-dependent analysis of visible helium line-ratios for electron temperature and density diagnostic using synthetic simulations on NSTX-U

Helium line-ratios for electron temperature (T{sub e}) and density (n{sub e}) plasma diagnostic in the Scrape-Off-Layer (SOL) and edge regions of tokamaks are widely used. Due to their intensities and proximity of wavelengths, the singlet, 667.8 and 728.1 nm, and triplet, 706.5 nm, visible lines have been typically preferred. Time-dependency of the triplet line (706.5 nm) has been previously analyzed in detail by including transient effects on line-ratios during gas-puff diagnostic applications. In this work, several line-ratio combinations within each of the two spin systems are analyzed with the purpose of eliminating transient effects to extend the application of this powerful diagnostic to high temporal resolution characterization of plasmas. The analysis is done using synthetic emission modeling and diagnostic for low electron density NSTX SOL plasma conditions by several visible lines. Quasi-static equilibrium and time-dependent models are employed to evaluate transient effects of the atomic population levels that may affect the derived electron temperatures and densities as the helium gas-puff penetrates the plasma. The analysis of a wider range of spectral lines will help to extend this powerful diagnostic to experiments where the wavelength range of the measured spectra may be constrained either by limitations of the spectrometer or by other conflicting lines from different ions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

First Observation of C P Violation in B ¯ 0 → D C P ( * ) h 0 Decays by a Combined Time-Dependent Analysis of BABAR and Belle Data

We report a measurement of the time-dependent CP asymmetry of B¯ 0 → D$^{(*)}_{CP}$h 0 decays, where the light neutral hadron h 0 is a π 0 , η, or ω meson, and the neutral D meson is reconstructed in the CP eigenstates K + K – , K$^{0}_{S}$π 0 , or K$^{0}_{S}$ω. The measurement is performed combining the final data samples collected at the Υ(4S) resonance by the BABAR and Belle experiments at the asymmetric-energy B factories PEP-II at SLAC and KEKB at KEK, respectively. The data samples contain (471 ± 3) × 10 6 BB¯ pairs recorded by the BABAR detector and (772 ± 11) × 10 6 BB¯ pairs recorded by the Belle detector. We measure the CP asymmetry parameters –ηfS = +0.66 ± 0.10(stat) ± 0.06(syst) and C = –0.02 ± 0.07(stat) ± 0.03(syst). Here, these results correspond to the first observation of CP violation in B¯ 0 → D$^{(*)}_{CP}$h 0 decays. The hypothesis of no mixing-induced CP violation is excluded in these decays at the level of 5.4 standard deviations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dependency Analysis Project

The Dependency Analysis Project creates datasets from package management ecosystems to determine what package a file was likely installed by, and provides tools to recognize implicit dependencies when source code is available for a variety of language ecosystems. The overarching goal is to help answer the question: what software does a system use?

Mast, Ryan↗

Time-dependent analysis of B 0 → K S 0 π - π + γ decays and studies of the K + π - π + system in B + → K + π - π + γ decays

We measure the time-dependent CP asymmetry in the radiative-penguin decay B 0 → K S 0 π - π + γ , using a sample of 471×10 6 Υ(4S)→BB-events recorded with the BABAR detector at the PEP-II e+e- storage ring at SLAC. Using events with m Kππ < 1.8 GeV/c 2 , we measure the branching fractions of B+→K+π-π+γ and B0→K0π-π+γ, the branching fractions of the kaonic resonances decaying to K+π-π+, as well as the overall branching fractions of the B+→ρ0K+γ, B+→K*0π+γ and S-wave B+→(Kπ)0*0π+γ components. For events from the ρ mass band, we measure the CP-violating parameters SKS0π+π-γ=0.14±0.25±0.03 and CKS0π+π-γ=-0.39±0.20-0.02+0.03, where the first uncertainties are statistical and the second are systematic. We extract from this measurement the time-dependent CP asymmetry related to the CP eigenstate ρ0KS0 and obtain SKS0ργ=-0.18±0.32-0.05+0.06, which provides information on the photon polarization in the underlying b→sγ transition.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dependability analysis of parallel systems using a simulation-based approach

The analysis of dependability in large, complex, parallel systems executing real applications or workloads is examined in this thesis. To effectively demonstrate the wide range of dependability problems that can be analyzed through simulation, the analysis of three case studies is presented. For each case, the organization of the simulation model used is outlined, and the results from simulated fault injection experiments are explained, showing the usefulness of this method in dependability modeling of large parallel systems. The simulation models are constructed using DEPEND and C++. Where possible, methods to increase dependability are derived from the experimental results. Another interesting facet of all three cases is the presence of some kind of workload of application executing in the simulation while faults are injected. This provides a completely new dimension to this type of study, not possible to model accurately with analytical approaches.

Sawyer, Darren Charles↗

Z-dependence analysis of M x-ray production cross sections for heavy elements with 60≤Z≤90 by protons impact

Motivated by the large deviation between the experiment and the predictions of the most often used model of ionization process by a charged particle, namely ECPSSR model, a large database of experimental M-shell X-ray production cross-sections by protons energies varying from 0.1 to 4.0 MeV for elements with atomic number 60 ≤ Z ≤ 90, is collected from various sources published from 1980 till 2009 to deduce an empirical M x-ray production cross section. This latter is then deduced from the available experimental data as a function of the scaled velocity parameter by using the whole range of elements (collective analysis) or by introducing the dependence of these cross sections on the atomic number of the target, noted as “Z-dependence analysis” in addition to the collective one. The corresponding results and their deviation from the experimental data are presented for selected elements. Also, a comparison is made for selected elements between our results and other theoretical as well as experimental works.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Energy Dependence Analysis of Neutrino-Nucleus Interactions in Scintillator for MINERvA

This thesis is on the intrinsic energy dependence in neutrino-nucleus interaction models, especially quasielastic scattering and 2p2h process, and the implications for understanding data from MINERvA, NOvA, and DUNE. Neutrino-nucleus interactions are modeled using fve structure functions, W1, W2, W3, W4 and W5, and each structure function contributes diferently to the energy dependence once it enters the cross-section calculations. The energy independent term in the calculations contains only W2 and the next lower order term (of the order 1/E) contains W3 also. In this thesis, we show that W2 is good enough to describe MINERvA data and energy dependence coming from the cross-section directly is small. However, W3 will be signifcant for lower energy experiments such as NOvA and DUNE (especially at and below the oscillation maximum). We have also developed a method to extract structure functions directly from MINERvA data though we find that systematic uncertainties present in the data are too big to successfully determine 1/E Term. In addition to this, we have applied muon angle cuts on MINERvA data and MC, which have their own energy dependent effects. An apparent energy dependent discrepancy comes from known shortcomings especially in the pion production model. Finally, because the energy dependence analysis has similarities to the low-$\nu$ method, we have evaluated discrepancies between the data and MC in light of diferent fux constraint techniques. The results suggest including MINERvA s low-$\nu$ method constraint is an improvement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An efficient data dependence analysis for parallelizing compilers

A novel algorithm, called the lambda test, is presented for an efficient and accurate data dependence analysis of multidimensional array references. It extends the numerical methods to allow all dimensions of array references to be tested simultaneously. Hence, it combines the efficiency and the accuracy of the both approaches. This algorithm has been implemented in PARAFRASE, a FORTRAN program parallelization restructurer developed at the University of Illinois at Urbana-Champaign. Some experimental results are presented to show its effectiveness.

Li, Zhiyuan↗

Solutions for Enhanced Legacy Probabilistic Risk Assessment Tools and Methodologies: Improving Efficiency of Model Development and Processing via Innovative Human Reliability Dependency Analysis

Probabilistic risk assessments (PRAs) are integral to nuclear power plant (NPP) operations, having tremendously benefitted the safety of the U.S. reactor fleet for decades. Insights obtained from the models have provided perspectives on a variety of applications, both at the plant and for the regulator. While these models are very useful, they are now being asked to represent and analyze aspects of the plant that were never envisioned by the initial PRA practitioners. Furthermore, heightened demands on the PRA models have led to increased computing power requirements. Additionally, as the complexity of the PRA models increased, the difficulty experienced by non-PRA experts in trying to understand these models, grasp the insights they provide, and effectively use that information has become problematic. The need for research to address key issues regarding PRA tools and methods has never been greater. Although the nuclear power industry has largely been well-served by these tools and methods, the underlying science is dated, remaining mostly unchanged for over two decades. Three areas were identified as most beneficial to address to maintain and improve the usefulness of the current practice legacy PRA tools: improved quantification speed, increased ability to efficiently model multi-hazard models, and improved modeling human action dependency in PRA. This report is focused on the third critical area, improvements in dependency analysis of human actions conducted as part of a typical human reliability assessment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Architecture-Level Dependability Analysis of a Medical Decision Support System

Recent advances in techniques such as image analysis, text analysis and machine learning have shown great potential to assist physicians in detecting and diagnosing health issues in patients. In this paper, we describe the approach and findings of an architecture-level dependability analysis for a mammography decision support system that incorporates these techniques. The goal of the research described in this paper is to provide an initial understanding of the dependability issues, particularly the potential failure modes and severity, in order to identify areas of potential high risk. The results will guide design decisions and provide the basis of a dependability and performance evaluation program.

99 GENERAL AND MISCELLANEOUS↗

Analysis of Tensile Deformation and Failure in Austenitic Stainless Steels: Part II- Irradiation Dose Dependence

Irradiation effects on stable and unstable deformations and fracture behaviors in irradiated austenitic stainless steels (SSs) have been studied in detail based on the equivalent true stress versus true strain curves. An iterative technique in finite element simulation was used to obtain the equivalent true stress-true strain data from experimental tensile curves. It was shown that the strain hardening rate was retained at a high level on unstable deformation after significant irradiation and was independent of the irradiation dose up to the initiation of a localized necking. The equivalent fracture stress was nearly independent of irradiation dose before the damage (embrittlement) mechanism changed. In low dose range (< ~ 2dpa), the fracture strain and tensile fracture energy decreased rapidly with dose and at higher doses they decreased gradually to saturated levels, which were still high for irradiated materials. It was also found that the fracture properties for EC316LN SS were less sensitive to irradiation dose than those for 316 SS, although their uniform tensile properties showed almost the same dose dependencies. It was confirmed that the dose dependence of tensile fracture properties evaluated by the linear approximation model for nominal stress was accurate enough for practical use without elaborate calculations.

36 MATERIALS SCIENCE↗

A Scale‐Dependent Analysis of the Barotropic Vorticity Budget in a Global Ocean Simulation

Abstract The climatological mean barotropic vorticity budget is analyzed to investigate the relative importance of surface wind stress, topography, planetary vorticity advection, and nonlinear advection in dynamical balances in a global ocean simulation. In addition to a pronounced regional variability in vorticity balances, the relative magnitudes of vorticity budget terms strongly depend on the length‐scale of interest. To carry out a length‐scale dependent vorticity analysis in different ocean basins, vorticity budget terms are spatially coarse‐grained. At length‐scales greater than 1,000 km, the dynamics closely follow the Topographic‐Sverdrup balance in which bottom pressure torque, surface wind stress curl and planetary vorticity advection terms are in balance. In contrast, when including all length‐scales resolved by the model, bottom pressure torque and nonlinear advection terms dominate the vorticity budget (Topographic‐Nonlinear balance), which suggests a prominent role of oceanic eddies, which are of km in size, and the associated bottom pressure anomalies in local vorticity balances at length‐scales smaller than 1,000 km. Overall, there is a transition from the Topographic‐Nonlinear regime at scales smaller than 1,000 km to the Topographic‐Sverdrup regime at length‐scales greater than 1,000 km. These dynamical balances hold across all ocean basins; however, interpretations of the dominant vorticity balances depend on the level of spatial filtering or the effective model resolution. On the other hand, the contribution of bottom and lateral friction terms in the barotropic vorticity budget remains small and is significant only near sea‐land boundaries, where bottom stress and horizontal viscous friction generally peak.

Khatri, Hemant↗

Time Dependent Analysis of Laser Heating of Metal Parts in Contact with HE

We consider the time dependent heat transfer of laser energy impinging on metal parts that are in contact with high explosives (HE). The predecessor to this calculation was TN-J4-17-2109, “Heat Transfer Analysis from Laser Energy on Metal Parts in Contact with HE”, which considered the time independent heat transfer and compared to experimental results. The intent here is to extend those results to the time dependent case. The steady-state results were developed because they were the “worst case” from a safety perspective: the steady state represents the highest possible temperature excursion. However, we found that the temperatures achieved were well above the safety limits established by the DOE High Explosives Safety Manual. Moreover, they were well above the safety limit published by the LANL / Weapons Facilities Operations (WFO) in WFO-OS-ES-48, which establishes an upper temperature limit of 70°C for metal in contact with High Explosive (HE). The J-4 response to the original results was to design, build, and deploy an interlock system for DARHT that would ensure no laser energy on the firing point when both personnel and HE were present. This system was tested and proved effective, refer TP-DARHT-1150, (12/19/2016). It was reviewed and approved by the LANL Explosives Instrumentation Review Committee, refer PRES-J4-16-2140, “DARHT Laser Diagnostics Interlock System: Presentation to the EIRC”, (2016). Although the interlock system prevented personnel from being on the firing point under conditions where the diagnostic lasers would heat metal above the WFO limit, the WFO limit was still exceeded during the Multiplexed Photonic Doppler Velocimetry (MPDV) tuning process. The only practical solution is to limit the amount of time that the MPDV lasers are engaged at full power. The diagnostics interlock system was implemented with laser shutters that can fully interrupt the beams, and these shutters can be used to limit the amount of time that the lasers will impinge on the hydrotest assembly. It is the purpose of this paper to provide quantitative guidance on what length of time can be permitted during this tuning process. Therefore, we will solve the time-dependent heat transfer equation to determine the temperature increase as a function of time. This function can be inverted to determine the maximum allowable time for energizing the lasers based on the maximum allowable temperature at the metal to HE interface.

42 ENGINEERING↗

SU-E-T-299: Small Fields Profiles Correction Through Detectors Spatial Response Functions and Field Size Dependence Analysis

Purpose: To calculate the spatial response function of various radiation detectors, to evaluate the dependence on the field size and to analyze the small fields profiles corrections by deconvolution techniques. Methods: Crossline profiles were measured on a Novalis Tx 6MV beam with a HDMLC. The configuration setup was SSD=100cm and depth=5cm. Five fields were studied (200×200mm2,100×100mm2, 20×20mm2, 10×10mm2and 5×5mm2) and measured were made with passive detectors (EBT3 radiochromic films and TLD700 thermoluminescent detectors), ionization chambers (PTW30013, PTW31003, CC04 and PTW31016) and diodes (PTW60012 and IBA SFD). The results of passive detectors were adopted as the actual beam profile. To calculate the detectors kernels, modeled by Gaussian functions, an iterative process based on a least squares criterion was used. The deconvolutions of the measured profiles were calculated with the Richardson-Lucy method. Results: The profiles of the passive detectors corresponded with a difference in the penumbra less than 0.1mm. Both diodes resolve the profiles with an overestimation of the penumbra smaller than 0.2mm. For the other detectors, response functions were calculated and resulted in Gaussian functions with a standard deviation approximate to the radius of the detector in study (with a variation less than 3%). The corrected profiles resolve the penumbra with less than 1% error. Major discrepancies were observed for cases in extreme conditions (PTW31003 and 5×5mm2 field size). Conclusion: This work concludes that the response function of a radiation detector is independent on the field size, even for small radiation beams. The profiles correction, using deconvolution techniques and response functions of standard deviation equal to the radius of the detector, gives penumbra values with less than 1% difference to the real profile. The implementation of this technique allows estimating the real profile, freeing from the effects of the detector used for the acquisition.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DEPEND: A simulation-based environment for system level dependability analysis

The design and evaluation of highly reliable computer systems is a complex issue. Designers mostly develop such systems based on prior knowledge and experience and occasionally from analytical evaluations of simplified designs. A simulation-based environment called DEPEND which is especially geared for the design and evaluation of fault-tolerant architectures is presented. DEPEND is unique in that it exploits the properties of object-oriented programming to provide a flexible framework with which a user can rapidly model and evaluate various fault-tolerant systems. The key features of the DEPEND environment are described, and its capabilities are illustrated with a detailed analysis of a real design. In particular, DEPEND is used to simulate the Unix based Tandem Integrity fault-tolerance and evaluate how well it handles near-coincident errors caused by correlated and latent faults. Issues such as memory scrubbing, re-integration policies, and workload dependent repair times which affect how the system handles near-coincident errors are also evaluated. Issues such as the method used by DEPEND to simulate error latency and the time acceleration technique that provides enormous simulation speed up are also discussed. Unlike any other simulation-based dependability studies, the use of these approaches and the accuracy of the simulation model are validated by comparing the results of the simulations, with measurements obtained from fault injection experiments conducted on a production Tandem Integrity machine.

Goswami, Kumar↗

Human Performance Analysis Depending on Operator Expertise (Student vs. Operator) and Simulator Complexity (Rancor Microworld vs. Compact Nuclear Simulator)

Human reliability analysis (HRA) evaluates human errors and provides human error probabilities (HEPs) for application in probabilistic safety assessment (PSA), which is a comprehensive safety assessment method for nuclear power plants (NPPs). Generally, HRA methods estimate HEPs based on human reliability data collected from actual historical measurement, simulator experiments, or expert judgement. Most recent HRA data collection studies focus on collecting data via full-scope main control room (MCR) simulators with actual licensed reactor operators. Contrary to this, Idaho National Laboratory (INL) has adopted a different approach, which attempts to collect HRA data based on experiment using simplified simulators and student participants by following the Simplified Human Error Experimental Program (SHEEP). This approach has a couple of advantages compared to full-scope data collection. Representatively, it has relatively low entry point for collecting HRA data, and secures large sample sizes with reasonable cost and labor. In the previous studies, we developed the SHEEP framework, then verified whether the data collected through the framework could support a representative full-scope data collection study, i.e., the Human Reliability Data Extraction (HuREX) study. Also, we analyzed human performance measurements depending on participant type (i.e., student vs. operator). In this paper, we analyze human performance data collected from an experiment comparing operator expertise and simulator complexity when using the more simplified simulator developed by INL, i.e., Rancor Microworld and the less simplified simulator, i.e., Compact Nuclear Simulator (CNS) developed by Korea Atomic Energy Research Institute (KAERI). Analysis of variance (ANOVA) tests and correlation analysis are used for analyzing the experimental data.

99 GENERAL AND MISCELLANEOUS↗