Search NASA⌕ Search

SEARCH · Search NASA

Results for “depth profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Application of linear least squares to the analysis of Auger electron spectroscopy depth profiles of plutonium oxides [Application of linear least squares to the analysis of AES depth profiles of plutonium oxides]

In this paper, the application of the linear least squares (LLS) methodology allows for quantitative determination of variation in material composition with depth. LLS fits were applied to decompose and enhance the interpretation of spectra obtained by Auger electron spectroscopy during depth profiles of oxidized plutonium surfaces. By means of the LLS algorithm, chemical state assignments of the Pu P 1 VV/O 45 VV, O KLL, and C KLL Auger transitions were determined and the existence of a subsurface oxycarbide layer was identified, with confirmation of the oxide and metal components provided from comparison to previous measurements of standard samples.

36 MATERIALS SCIENCE↗

Parameterized complex dielectric functions of CuIn 1−x Ga x Se 2 : applications in optical characterization of compositional non‐uniformities and depth profiles in materials and solar cells

Abstract In‐situ spectroscopic ellipsometry (SE) was employed to extract the complex dielectric functions ε = ε 1 + iε 2 over the spectral range of 0.75–6.5 eV for a set of polycrystalline CuIn 1− x Ga x Se 2 (CIGS) thin films with different alloy compositions x = [Ga]/{[In] + [Ga]}. For highest possible accuracy in ε for each CIGS thin film, specialized SE procedures were adopted including (i) deposition to a thickness of ~600 Å on smooth native oxide covered crystal silicon wafers, which minimizes the surface roughness on the film and thus the required corrections in data analysis, and (ii) measurement in‐situ , which minimizes ambient contamination and oxidation of the film surface. Assuming an analytical form for each of the ε spectra for these CIGS films, oscillator parameters were obtained in best fits, and these parameters were fit in turn to polynomials in x . With the resulting database of polynomial coefficients, the ε spectra for any composition of CIGS can be generated from the single parameter, x . In addition to enabling accurate contactless determination of bulk and surface roughness layer thicknesses of CIGS films by high speed multichannel SE, the database enables characterization of the composition and its profile with depth into these films, and even how the depth profile varies spatially within the plane of the films. In this study, depth profile parameters were found to correlate spatially with solar cell performance parameters. As a result, SE provides the capability of contactless compositional analysis of production‐scale CIGS photovoltaic modules at high speed. Copyright © 2016 John Wiley & Sons, Ltd.

Aryal, Puruswottam↗

Characterization of zirconium carbides using electron microscopy, optical anisotropy, Auger depth profiles, X-ray diffraction, and electron density calculated by charge flipping method

Samples with five different zirconium carbide compositions (C/Zr molar ratio=0.84, 0.89, 0.95, 1.05, and 1.17) have been fabricated and studied using a variety of experimental techniques. Each sample was zone refined to ensure that the end product was polycrystalline with a grain size of 10-100 {mu}m. It was found that the lattice parameter was largest for the x=0.89 composition and smallest for the x=1.17 total C/Zr composition, but was not linear; this nonlinearity is possibly explained using electron densities calculated using charge flipping technique. Among the five samples, the unit cell of the ZrC{sub 0.89} sample showed the highest electron density, corresponding to the highest carbon incorporation and the largest lattice parameter. The ZrC{sub 0.84} sample showed the lowest carbon incorporation, resulting in a larger number of carbon vacancies and resultant strain. Samples with larger carbon ratios (x=0.95, 1.05, and 1.17) showed a slight decrease in lattice parameter, due to a decrease in electron density. Optical anisotropy measurements suggest that these three samples contained significant amounts of a graphitic carbon phase, not bonded to the Zr atoms. - Graphical abstract: Characterization of zirconium carbides using electron microscopy, optical anisotropy, Auger depth profiles, X-ray diffraction, and electron density calculated by the charge flipping method. Highlights: Black-Right-Pointing-Pointer The lattice parameter variation: ZrC{sub 0.89}>ZrC{sub 0.84}>ZrC{sub 0.95}>ZrC{sub 1.05}>ZrC{sub 1.17}. Black-Right-Pointing-Pointer Surface oxygen with no correlation to the lattice parameter variation. Black-Right-Pointing-Pointer ZrC{sub 0.89} had highest electron densities correspond to highest carbon incorporation. Black-Right-Pointing-Pointer Second highest lattice parameter in ZrC{sub 0.84} due to strain. Black-Right-Pointing-Pointer Unit cell electron density order: ZrC{sub 0.95}>ZrC{sub 1.05}>ZrC{sub 1.17}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ToF-SIMS Depth Profiling Of Insulating Samples, Interlaced Mode Or Non-interlaced Mode?

Dual beam depth profiling strategy has been widely adopted in ToF-SIMS depth profiling, in which two basic operation modes, interlaced mode and non-interlaced mode, are commonly used. Generally, interlaced mode is recommended for conductive or semi-conductive samples, whereas non-interlaced mode is recommended for insulating samples, where charge compensation can be an issue. Recent publications, however, show that the interlaced mode can be used effectively for glass depth profiling, despite the fact that glass is an insulator. In this study, we provide a simple guide for choosing between interlaced mode and non-interlaced mode for insulator depth profiling. Two representative cases are presented: (1) depth profiling of a leached glass sample, and (2) depth profiling of a single crystal MgO sample. In brief, the interlaced mode should be attempted first, because (1) it may provide reasonable-quality data, and (2) it is time-saving for most cases, and (3) it introduces low H/C/O background. If data quality is the top priority and measurement time is flexible, non-interlaced mode is recommended because interlaced mode may suffer from low signal intensity and poor mass resolution. A big challenge is tracking trace H/C/O in a highly insulating sample (e.g., MgO), because non-interlaced mode may introduce strong H/C/O background but interlaced mode may suffer from low signal intensity. Meanwhile, a C or Au coating is found to be very effective to improve the signal intensity. Surprisingly, the best analyzing location is not on the C or Au coating, but at the edge (outside) of the coating.

Environmental Molecular Sciences Laboratory↗

ToF-SIMS Depth Profiling of Organic Delta Layers with Low-Energy Cesium Ions: Depth Resolution Assessment

The advent of cluster ion beams has paved the way to the routine 3D analysis of organic heterojunctions. Alternatively, organic thin layers have also been successfully depth profiled with a low-energy cesium ion beam (Cs{sup +}), to exploit the high chemical reactivity of cesium atoms, acting as free-radical scavengers. Despite of this, little is known about the depth resolution associated with low-energy Cs{sup +} sputtering on organic multilayers. In this work, amino acids multilayers, consisting of phenylalanine delta layers alternated with tyrosine spacers, were used as model systems to assess the depth resolution associated with 500 eV Cs{sup +} depth profiles. High yields were obtained for quasi-molecular ions from both amino acids, and no significant chemical alteration was noticed under the monoatomic bombardment. A depth resolution as low as 4 nm is demonstrated without sensible degradation on a rather long profile depth (300 nm). Limited depth resolution (> 10 nm) along with high molecular degradation was previously reported on similar systems by combining low-energy Cs{sup +} with Ga{sup +} analysis beam. The use of the Bi{sub 3}{sup +} analysis beam results in a dramatic improvement of both the characteristic molecular signal intensities and the depth resolution. Even though the analysis beam fluence is very low compared to the sputtering beam fluence, data suggest that further reducing the analysis Bi{sub 3}{sup +} fluence could improve the depth resolution by ~ 1 nm. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Combining dynamic and static depth profiling in low energy ion scattering

The advantages of combining dynamic and static depth profiling in low energy ion scattering are demonstrated for an Si/SiO{sub x}/W/Al{sub 2}O{sub 3} ALD stack. Dynamic depth profiling can be used to calibrate static depth profiling. Energy losses of 152 and 215 eV/nm were found for 3 keV {sup 4}He{sup +} and 5 keV {sup 4}He{sup +} primary ions, respectively, for the experimental configuration used. This is in good agreement with the values used in the field. Static depth profiling can be used to recognize sputter artifacts in dynamic depth profiles.

36 MATERIALS SCIENCE↗

An Investigation of Hydrogen Depth Profiling Using ToF-SIMS

Hydrogen depth distributions in silicon, zinc oxide and glass are of great interest in material research and industry. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) has been used for hydrogen depth profiling for many years. However, some critical information, such as optimal instrumental settings and detection limits, is not easily available from previous publications. In this work, optimal instrumental settings and detection limits of hydrogen in silicon, zinc oxide and common glass were investigated. The recommended experimental settings for hydrogen depth profiling using ToF-SIMS are: (1) keeping pressure in the analysis chamber as low as possible, (2) using a cesium beam for sputtering and monitoring the H{sup -} signal, (3) employing monatomic ion analysis beams with the highest currents, and (4) using interlace mode. In addition, monatomic secondary ions from a matrix are recommended as references to normalize the H{sup -} signal. Detection limits of hydrogen are limited by pressure of residual gases in the analysis chamber. The base pressure of the analysis chamber (with samples) is about 7 x 10{sup -10} mbar in this study, and the corresponding detection limits of hydrogen in silicon, zinc oxide, and common glass are 1.3 x 10{sup 18} atoms/cm{sup 3}, 1.8 x 10{sup 18} atoms/cm{sup 3}, and 5.6 x 10{sup 18} atoms/cm{sup 3}, respectively.

08 HYDROGEN↗

Confocal volume in laser Raman microscopy depth profiling

To clarify the degradation of confocality in laser Raman microscopy depth profiling (optical sectioning) and the influence of pinhole filtering on it, we investigate the confocal volume in detail based on Gaussian beam optics and scalar wave optics. Theoretical depth profiles of a homogeneous transparent sample for four different pinhole sizes, which are computed using the measured incident beam waist radius w{sub 0} and only a few optical system specific parameters such as a numerical aperture (NA) and a focal length, show a good agreement with the corresponding measured depth profiles. The computed confocal volume demonstrates that the pinhole size affects the actual probe depth as well as the axial resolution and the total intensity loss.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Depth profiling analysis of solar wind helium collected in diamond-like carbon film from Genesis

The distribution of solar-wind ions in Genesis mission collectors, as determined by depth profiling analysis, constrains the physics of ion solid interactions involving the solar wind. Thus, they provide an experimental basis for revealing ancient solar activities represented by solar-wind implants in natural samples. We measured the first depth profile of ⁴He in a collector; the shallow implantation (peaking at <20 nm) required us to use sputtered neutral mass spectrometry with post-photoionization by a strong field. The solar wind He fluence calculated using depth profiling is ~8.5 x 10¹⁴ cm⁻². The shape of the solar wind ⁴He depth profile is consistent with TRIM simulations using the observed ⁴He velocity distribution during the Genesis mission. It is therefore likely that all solar-wind elements heavier than H are completely intact in this Genesis collector and, consequently, the solar particle energy distributions for each element can be calculated from their depth profiles. Ancient solar activities and space weathering of solar system objects could be quantitatively reproduced by solar particle implantation profiles.

79 ASTRONOMY AND ASTROPHYSICS↗

Depth profiling of semiconductor structures by X-ray microanalysis using the electron probe energy variation technique

Depth profiling of semiconductor structures by X-ray microanalysis using the electron probe variation technique followed by mathematical processing of the measurement results is described. Experimental dependences of the relative X-ray intensity on the energy of the electron probe were compared to the Monte Carlo simulation results. Concentration depth profiles were estimated using a priori assumptions, and numerical parameters of the depth distributions were determined from the best fit of calculated curves to the experimental data. The technique was applied to determine Al depth profiles in SiC and GaN samples.

36 MATERIALS SCIENCE↗

Concentration and relaxation depth profiles of In{sub x}Ga{sub 1-x}As/GaAs and GaAs{sub 1-x}P{sub x}/GaAs graded epitaxial films studied by x-ray diffraction

A method is proposed to determine the concentration and relaxation depth profiles in graded epitaxial films from x-ray reciprocal space maps (RSMs). Various approximations in the kinematical x-ray diffraction from epitaxial films with the misfit dislocation density depth profile are developed. We show that a symmetric and an asymmetric RSM, or two asymmetric RSMs, contain enough information to obtain the concentration, relaxation, and lattice tilt depth profiles without any additional assumptions. The proposed approach is applied to In{sub x}Ga{sub 1-x}As/GaAs and GaAs{sub 1-x}P{sub x}/GaAs epitaxial graded films. The reconstructed concentration and dislocation density depth profiles are found to be in an agreement with the ones expected from the growth conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding Measurement Artifacts Causing Inherent Cation Gradients in Depth Profiles of Perovskite Photovoltaics with TOF-SIMS

Time-of-flight secondary-ion mass spectrometry (TOF-SIMS) is one of the few techniques that can obtain chemical information from the hybrid organic-inorganic perovskite solar cells (PSCs) in one dimension (standard depth profiling), two dimensions (high-resolution 100-nm imaging), as well as three dimensions (tomography combining high-resolution imaging with depth profiling). We have very recently developed thermo-mechanical methods to cleave perovskite samples at the back transparent conducting oxide/PSC interface. This allowed for depth-profiling from the back of the device to the front. The resultant profiles answered the lingering question of the apparent A-site cation gradient typically seen in TOF-SIMS depth profiles. In fact, this gradient is a measurement artifact due to beam damage that the community should be informed of as TOF-SIMS data become more commonly employed. Methods of mitigating this artifact by altering the measurement conditions are also presented.

14 SOLAR ENERGY↗

X-ray photoelectron spectroscopy study of polyimide thin films with Ar cluster ion depth profiling

X-ray photoelectron spectroscopy depth profiling of polyimide thin films on silicon substrates using an Ar cluster ion beam results in an extremely low degradation of the polyimide chemistry. In the range from 2.5 to 20 kV, a lower cluster ion energy produces a lower sputter induced damage to the polymer and results in an improved polyimide to silicon interface width. The sputtering rates of the polyimide are found to increase exponentially with an increase in the Ar cluster ion energy.

36 MATERIALS SCIENCE↗

Interpreting inorganic compositional depth profiles to understand the rate-limiting step in vapor phase infiltration processes

Vapor phase infiltration (VPI) is a post-polymerization modification technique that infuses inorganics into polymers to create organic–inorganic hybrid materials with new properties. Much is yet to be understood about the chemical kinetics underlying the VPI process. The aim of this study is to create a greater understanding of the process kinetics that govern the infiltration of trimethyl aluminum (TMA) and TiCl 4 into PMMA to form inorganic-PMMA hybrid materials. To gain insight, this paper initially examines the predicted results for the spatiotemporal concentrations of inorganics computed from a recently posited reaction–diffusion model for VPI. This model provides insight on how the Damköhler number (reaction versus diffusion rates) and non-Fickian diffusional processes (hindering) that result from the material transforming from a polymer to a hybrid can affect the evolution of inorganic concentration depth profiles with time. Subsequently, experimental XPS depth profiles are collected for TMA and TiCl 4 infiltrated PMMA films at 90 °C and 135 °C. The functional behavior of these depth profiles at varying infiltration times are qualitatively compared to various computed predictions and conclusions are drawn about the mechanisms of each of these processes. TMA infiltration into PMMA appears to transition from a diffusion-limited process at low temperatures (90 °C) to a reaction-limited process at high temperatures (135 °C) for the film thicknesses investigated here (200 nm). While TMA appears to fully infiltrate these 200 nm PMMA films within a few hours, TiCl 4 infiltration into PMMA is considerably slower, with full saturation not occurring even after 2 days of precursor exposure. Infiltration at 90 °C is so slow that no clear conclusions about mechanism can be drawn; however, at 135 °C, the TiCl 4 infiltration into PMMA is clearly a reaction-limited process, with TiCl 4 permeating the entire thickness (at low concentrations) within only a few minutes, but inorganic loading continuously increasing in a uniform manner over a course of 2 days. Near-surface deviations from the uniform-loading expected for a reaction-limited process also suggest that diffusional hindering is high for TiCl 4 infiltration into PMMA. In conclusion, these results demonstrate a new, ex situ analysis approach for investigating the rate-limiting process mechanisms for vapor phase infiltration.

36 MATERIALS SCIENCE↗

Cation- and lattice-site-selective magnetic depth profiles of ultrathin Fe 3 O 4 (001) films

A detailed understanding of ultrathin film surface properties is crucial for the proper interpretation of spectroscopic, catalytic, and spin-transport data. We present x-ray magnetic circular dichroism (XMCD) and x-ray resonant magnetic reflectivity (XRMR) measurements on ultrathin Fe 3 O 4 films to obtain magnetic depth profiles for the three resonant energies corresponding to the different cation species F e o c t 2 + , F e t e t 3 + , and F e o c t 3 + located on octahedral and tetrahedral sites of the inverse spinel structure of Fe 3 O 4 . By analyzing the XMCD spectrum of Fe 3 O 4 using multiplet calculations, the resonance energy of each cation species can be isolated. Performing XRMR on these three resonant energies yields magnetic depth profiles that each correspond to one specific cation species. The depth profiles of both kinds of Fe 3+ cations reveal a (3.9 ± 1.0) -Å -thick surface layer of enhanced magnetization, which is likely due to an excess of these ions at the expense of the F e o c t 2 + species in the surface region. The magnetically enhanced F e t e t 3 + layer is additionally shifted about 2.9 ± 0.4 Å farther from the surface than the F e o c t 3 + layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗