Search NASA⌕ Search

SEARCH · Search NASA

Results for “diameter distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Fiber diameter distributions in the chinchilla's ampullary nerves

A morphometric study of the chinchilla's ampullary nerves was conducted to produce an unbiased accounting of the diameter distribution of their constituent fibers. Diameter analyses were determined from 1 microm plastic-embedded nerve sections taken at a plane immediately proximal to the sensory epithelium. We found these nerves to be composed of 2094+/-573 fibers, having diameters that ranged from 0.5 to 8 microm. The distributions of diameters were positively skewed, where approximately 75% of the fibers were found to have diameters less than 3.5 microm. An analysis of the spatial distribution of diameters within the nerve section revealed that the lateralmost areas of the nerve contained larger fractions of fibers within the smallest diameter quintiles, and the central area harbored greater proportions of the larger diameter quintiles. However, significant fractions of all quintiles were found in all areas. These data were integrated with available data of Fernandez et al. (1998) to produce diameter estimates of calyx, dimorphic, and bouton morphology subpopulations. In view of a general relationship between diameter, innervation locus, and an afferent's physiologic characteristics, these data provide the basis for developing a perspective for the in situ distribution of afferent response dynamics.

Non-NASA Center↗

Interpretation of the number versus diameter distribution for supernova remnants in the Large Magellanic Cloud

An examination is conducted of the cumulative number versus diameter relation for an X-ray selected sample of supernova remnants in the Large Magellanic Cloud in an attempt to understand the evolutionary state of these objects. Previous studies have suggested that the observed linear N(D) relation requires the remnants in the cloud to be freely expanding. Detailed calculations have been carried out to determine the effect of a luminosity threshold on the observed distribution and it is shown that the observations can be fitted by remnants which are in the adiabatic or later stages of evolution. The implications of the results for the supernova creation rate in the LMC are discussed.

Hughes, J. P.↗

Possible test of ancient dense Martian atmosphere

We have completed preliminary calculations of the minimum sizes of bolides that would penetrate various hypothetical Martian atmospheres with surface pressures ranging from 6 to 1000 mbar for projectiles of various strengths. The calculations are based on a computer program. These numbers are used to estimate the diameter corresponding to the turndown in the crater diameter distribution due to the loss of these bodies, analogous to the dramatic turndown at larger sized already discovered on Venus due to this effect. We conclude that for an atmosphere greater than a few hundred millibars, a unique downward displacement in the diameter distribution would develop in the crater diameter distribution at D approximately = 0.5-4 km, due to loss of all but Fe bolides. Careful search for this displacement globally, as outlined here, would allow us to place upper limits on the pressure of the atmosphere contemporaneous with the oldest surfaces, and possibly to get direct confirmation of dense ancient atmospheres.

Hartmann, W. K.↗

Depth/diameter relations of fresh lunar craters - Revision from spacecraft data

The first systematic data from Apollo photogrammetry provide a high standard of accuracy for the depth/diameter relation of fresh lunar craters. Apollo depth-diameter results resemble results obtained by measuring shadows on Lunar Orbiter imagery. The depth-diameter distribution inflects at a crater diameter of 10 to 15 km. Lunar craters less than 15 km across are at least 50% deeper than older, telescopic data indicated, but larger craters are not much deeper. There is no marked depth-diameter difference between fresh upland and postmare craters. The new depth-diameter relation for small lunar craters resembles those of experimental and impact craters on earth.

Pike, R. J.↗

Structural evolution of Arsia Mons, Pavonis Mons, and Ascreus Mons Tharsis region of Mars

Analysis of Viking Orbiter data suggests that Arsia Mons, Pavonis Mons, and Ascreus Mons, three large shield volcanoes of the Tharsis volcanoes of Mars, have had similar evolutionary trends. Arsia Mons appears to have developed in the following sequence: (1) construction of a main shield volcano, (2) outbreak of parasitic eruption centers on the northeast and southwest flanks, (3) volcano-tectonic subsidence of the summit and formation of concentric fractures and grabens, possibly by evacuation of an underlying magma chamber during eruption of copious lavas from parasitic eruption centers on the northeast and southwest flanks, and (4) continued volcanism along a fissure or rift bisecting the main shield, resulting in flooding of the floor of the volcano-tectonic depression and inundation of the northeast and southwest flanks by voluminous lavas locally forming parasitic shields. In terms of this sequence Pavonis Mons has developed to stage (3) and Ascreus Mons has evolved to stage (2). This interpretation is supported by crater frequency-diameter distributions in the 0.1- to 3.0-km diameter range.

Crumpler, L. S.↗

Optical Plasma Control During ARC Carbon Nanotube Growth

To improve nanotube production, we developed a novel optical control technique, based on the shape of the visible plasma zone created between the anode and the cathode in the direct current (DC) arc process. For a given inert gas, we adjust the anode to cathode distance (ACD) in order to obtain strong visible vortices around the cathode. This enhance anode vaporization, which improve nanotubes formation. In light of our experimental results, we focus our discussion on the relationship between plasma parameters and nanotube growth. Plasma temperature control during arc process is achieved using argon, helium, and their mixtures as a buffer gases. The variation of the gas mixture from pure argon to pure helium changes plasma temperature. As a consequence, the microscopic characteristics of nanotubes as diameter distribution is changed moving from smaller values for argon to higher diameters for helium. We also observe a dependence of the macroscopic characteristics of the final products as Brunauer-Emmett-Teller (BET) surface area.

Hinkov, I.↗

Review of Laser Ablation Process for Single Wall Carbon Nanotube Production

Different types of lasers are now routinely used to prepare single wall carbon nanotubes (SWCNTs). The original method developed by researchers at Rice University utilized a "double pulse laser oven" process. A graphite target containing about 1 atomic percent of metal catalysts is ablated inside a 1473K oven using laser pulses (10 ns pulse width) in slow flowing argon. Two YAG lasers with a green pulse (532 nm) followed by an IR pulse (1064 nm) with a 50 ns delay are used for ablation. This set up produced single wall carbon nanotube material with about 70% purity having a diameter distribution peaked around 1.4 nm. The impurities consist of fullerenes, metal catalyst clusters (10 to 100 nm diameter) and amorphous carbon. The rate of production with the initial set up was about 60 mg per hour with 10Hz laser systems. Several researchers have used variations of the lasers to improve the rate, consistency and study effects of different process parameters on the quality and quantity of SWCNTs. These variations include one to three YAG laser systems (Green, Green and IR), different pulse widths (nano to microseconds as well as continuous) and different laser wavelengths (Alexandrite, CO, CO2, free electron lasers in the near to far infrared). It is noted that yield from the single laser (Green or IR) systems is only a fraction of the two laser systems. The yield seemed to scale up with the repetition rate of the laser systems (10 to 60 Hz) and depended on the beam uniformity and quality of the laser pulses. The shift to longer wavelength lasers (free electron, CO and CO2) did not improve the quality, but increased the rate of production because these lasers are either continuous (CW) or high repetition rate pulses (kHz to MHz). The average power and the peak power of the lasers seem to influence the yields. Very high peak powers (MegaWatts per square centimeter) are noted to increase ablation of bigger particles with reduced yields of SWCNTs. Increased average powers seem to help the conversion of the carbon from target into vapor phase to improve formation of nanotubes. The use of CW far infrared lasers reduced the need for the oven, at the expense of controlled ablation. Some of these variations are tried with different combinations and concentrations of metal catalysts (Nickel with Cobalt, Iron, Palladium and Platinum) different buffer gases (e.g. Helium); with different oven temperatures (Room temperature to 1473K); under different flow conditions (1 to 1000 kPa) and even different porosities of the graphite targets. It is to be noted that the original Cobalt and Nickel combination worked best, possibly because of improved carbonization with stable crystalline phases. The mean diameter and yield seemed to increase with increasing oven temperatures. Thermal conductivity of the buffer gas and flow conditions dictate the quality as well as quantity of the SWCNTs. Faster flows, lower pressures and heavier gases seem to increase the yields. This review will attempt to cover all these variations and their relative merits. Possible growth mechanisms under these different conditions will also be discussed.

Arepalli, Sivaram↗

Effect of liquid droplets on turbulence structure in a round gaseous jet

A proposed two equation turbulence model for incompressible dilute two phase flows was validated and extended for steady incompressible two phase flow including phase change. The model was tested for the flow of a turbulent axisymmetric gaseous jet laden with multisize evaporating liquid droplets. Predicted results include distributions of the mean velocity; volume fractions of different phases concentration of the evaporated material in the carrier phase; turbulence intensity and shear stress of the carrier phase; droplet diameter distribution; and the jet spreading rate. Results are analyzed based on a qualitative comparison with the corresponding single phase jet flow.

Mostafa, A. M.↗

Effect of liquid droplets on turbulence in a round gaseous jet

The main objective of this investigation is to develop a two-equation turbulence model for dilute vaporizing sprays or in general for dispersed two-phase flows including the effects of phase changes. The model that accounts for the interaction between the two phases is based on rigorously derived equations for turbulence kinetic energy (K) and its dissipation rate epsilon of the carrier phase using the momentum equation of that phase. Closure is achieved by modeling the turbulent correlations, up to third order, in the equations of the mean motion, concentration of the vapor in the carrier phase, and the kinetic energy of turbulence and its dissipation rate for the carrier phase. The governing equations are presented in both the exact and the modeled formes. The governing equations are solved numerically using a finite-difference procedure to test the presented model for the flow of a turbulent axisymmetric gaseous jet laden with either evaporating liquid droplets or solid particles. The predictions include the distribution of the mean velocity, volume fractions of the different phases, concentration of the evaporated material in the carrier phase, turbulence intensity and shear stress of the carrier phase, droplet diameter distribution, and the jet spreading rate. The predictions are in good agreement with the experimental data.

Mostafa, A. A.↗

Orientational Growth of Carbon Nanotube for Applications

Since the superior properties of multi-wall carbon nanotubes (MWCNT) could improve numerous devices such as electronics and sensors, many efforts have been made in investigating the growth mechanism of MWCNT to synthesize high quality MWCNT. Most applications require uniform aligned CNT. In this presentation, a directional growth of CNT will be reported. Carbon nanotubes are synthesized using thermal chemical vapor deposition. Temperature and pressure are two important growth parameters for fabricating carbon nanotubes. It is found that the nanotube diameter distribution mainly depends on the growth-temperature. With the substrate surface normal either along or against the gravity vector, different growth orientations of MWCNT are observed by scanning electron microscopy although the Raman spectra are similar for samples synthesized at different locations. The sizes of these carbon nanotubes in each sample are quite uniform and the length of the tube is up to several tens of micrometers. These results suggest the gravitation effects in the growth of long and small diameter CNT.

Zhu, Shen↗

Martian cratering. II - Asteroid impact history.

This paper considers the extent to which Martian craters can be explained by considering asteroidal impact. Sections I, II, and III of this paper derive the diameter distribution of hypothetical asteroidal craters on Mars from recent Palomar-Leiden asteroid statistics and show that the observed Martian craters correspond to a bombardment by roughly 100 times the present number of Mars-crossing asteroids. Section IV discusses the early bombardment history of Mars, based on the capture theory of Opik and probable orbital parameters of early planetesimals. These results show that the visible craters and surface of Mars should not be identified with the initial, accreted surface. A backward extrapolation of the impact rates based on surviving Mars-crossing asteroids can account for the majority of Mars craters over an interval of several aeons, indicating that we see back in time no further than part-way into a period of intense bombardment. An early period of erosion and deposition is thus suggested. Section V presents a comparison with results and terminology of other authors.

Hartmann, W. K.↗

Martian cratering. III - Theory of crater obliteration.

Discussion of a theoretical basis for interpretation of Martian crater obliteration. Strong evidence is found that Martian craters are being degraded and obliterated at a rate much faster than on the moon, but much slower than on earth. The theory obviates the need to interpret the diameter distribution in terms of two classes of impacting bodies, as has been done elsewhere. It is suggested that obliteration is caused by filling of the craters, probably by deposition of dust.

Hartmann, W. K.↗

Spectrophotometry of the X-ray binary HZ Herculis

An extensive set of absolute spectrophotometric observations of HZ Her over the wavelength range from 3300 to 10,000 A is presented and analyzed to determine to what extent the observations can be interpreted in terms of a model for the system. The specific model to be tested consists of a large star (HZ Her) with a hot cap beneath the X-ray source, an accretion disk around the X-ray source, and a gas stream flowing between the primary star and the disk. It is found that the model is compatible to a large extent with the detailed observations and that the physical characteristics of the various components can be derived. The mass, luminosity, and radius of the primary star, the mass of the X-ray object, and the orbital dimensions are obtained by analyzing the energy distribution at minimum light and X-ray eclipse data. The angle and effective temperature of the hot cap on the primary are also determined along with the energy distribution, diameter, and thickness of the accretion disk. It is concluded that HZ Her fills its Roche lobe and is an A7 V star, that the logarithm of its surface gravity is about 3.6, and that the mass of the X-ray object is 1.95 solar masses.

Oke, J. B.↗

Radio emission from supernova remnants in a cloudy interstellar medium

The van der Laan (1962) theory of SNR radio emission is modified in light of the inhomogeneity of the interstellar medium, and in order to allow for particle acceleration in shock fronts. It is proposed that most of the radio emission in 10-20 pc radius SNRs originates in cold interstellar clouds that have been crushed by the high pressure hot gas within the expanding remnant. Under these circumstances, simple reacceleration of ambient interstellar cosmic ray electrons can account for the surface brightness-diameter distribution of observed remnants, with the additional, relativistic particle energy compensating for the decreased filling factor of the radio-emitting regions. Warm interstellar gas, at about 8000 K, may also be compressed within very large SNRs (of radius of 30-100 pc) and account for both the giant radio loops, when these SNRs are seen individually, and the anomalously bright galactic nonthermal radio background, which may be the superposition of a number of such features.

Blandford, R. D.↗

Does saturation cratering exist in the solar system?

A number of researchers have concluded that saturation equilibrium cratering exists nowhere in the solar system, and therefore that diameter distributions in even the most heavily cratered provinces reveal initial production functions related to impacting bodies. Based on this premise, different populations of impactors are identified in different epochs and regions of the solar system. These hypotheses are clearly crucial to interpreting planetary history and need further independent examination. The production function in the outer solar system may differ from that in the inner solar system, but it is also possible that viscous relaxation of ice craters or immediate flooding of craters that penetrate through an ice lithosphere into watery substrate may explain the greater deficiency of large craters on icy moons. This problem is controversial and needs more study.

Hartmann, W. K.↗

Progress on Studies of Early Intense Cratering

The existence and effects of saturation cratering throughout the solar system was studied. It is found that saturation equilibrium cratering exists nowhere in the solar system, and that diameter distributions in even the most heavily cratered provinces reveal initial production functions related to impacting bodies. Different populations of impactors in different epochs and regions of the solar system are identified. The hypotheses are crucial for interpretation of planetary history. The crater counts on frontside lunar uplands, used as a basic reference curve identified with one of their populations of early impactors, are confirmed. This crater population is deficient in 1 to 16 km craters, which may be obliterated by the lavas. It is concluded that this curve is not representative of heavily cratered highlands, and is of questionable value as a standard comparison curve. The role of giant impacts during the intense early bombardment period was studied. Giant impact(s) on the primeval Earth may have initiated lunar formation.

Hartmann, W. K.↗