Search NASA⌕ Search

SEARCH · Search NASA

Results for “dielectrics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Experimental Demonstration of Wakefield Acceleration in a Tunable Dielectric Loaded Accelerating Structure

We report on a collinear wakefield experiment using the first tunable dielectric loaded accelerating structure. By introducing an extra layer of nonlinear ferroelectric, which has a dielectric constant sensitive to temperature and dc bias, the frequency of a dielectric loaded accelerating structure can be tuned. During the experiment, the energy of a witness bunch at a fixed delay with respect to the drive beam was measured while the temperature of the structure was scanned over a 50 deg. C range. The energy change corresponded to a change of more than half of the nominal structure wavelength.

43 PARTICLE ACCELERATORS↗

Rapid and multi-step, patterned electrophoretic deposition of nanocrystals using electrodes covered with dielectric barriers

The rates of electrophoretic deposition (EPD) of CdSe nanocrystals (NCs) are approximately the same when powering electrodes on either the frontside or backside of thick dielectrics when the resistance of the NC colloid exceeds that of the dielectric barrier. Using electrodes with dielectric barriers enables conformal coverage over topography on the frontside. It also enables multistep processing when combined with powering patterned frontside electrodes for localized EPD. Powering patterned backside electrodes produces film features that are wider than the electrode dimensions, which is consistent with the results of modeling the electric field profile.

42 ENGINEERING↗

Highly tunable elastic dielectric metasurface lenses

Abstract Dielectric metasurfaces are two‐dimensional structures composed of nano‐scatterers that manipulate the phase and polarization of optical waves with subwavelength spatial resolution, thus enabling ultra‐thin components for free‐space optics. While high performance devices with various functionalities, including some that are difficult to achieve using conventional optical setups have been shown, most demonstrated components have fixed parameters. Here, we demonstrate highly tunable dielectric metasurface devices based on subwavelength thick silicon nano‐posts encapsulated in a thin transparent elastic polymer. As proof of concept, we demonstrate a metasurface microlens operating at 915 nm, with focal distance tuning from 600 μm to 1400 μm (over 952 diopters change in optical power) through radial strain, while maintaining a diffraction limited focus and a focusing efficiency above 50%. The demonstrated tunable metasurface concept is highly versatile for developing ultra‐slim, multi‐functional and tunable optical devices with widespread applications ranging from consumer electronics to medical devices and optical communications. image

Kamali, Seyedeh Mahsa↗

Possibility for ultra-bright electron beam acceleration in dielectric wakefield accelerators

We describe a conceptual proposal to combine the Dielectric Wakefield Accelerator (DWA) with the Emittance Exchanger (EEX) to demonstrate a high-brightness DWA with a gradient of above 100 MV/m and less than 0.1% induced energy spread in the accelerated beam. We currently evaluate the DWA concept as a performance upgrade for the future LANL signature facility MaRIE with the goal of significantly reducing the electron beam energy spread. The preconceptual design for MaRIE is underway at LANL, with the design of the electron linear accelerator being one of the main research goals. Although generally the baseline design needs to be conservative and rely on existing technology, any future upgrade would immediately call for looking into the advanced accelerator concepts capable of boosting the electron beam energy up by a few GeV in a very short distance without degrading the beam's quality. Scoping studies have identified large induced energy spreads as the major cause of beam quality degradation in high-gradient advanced accelerators for free-electron lasers. We describe simulations demonstrating that trapezoidal bunch shapes can be used in a DWA to greatly reduce the induced beam energy spread, and, in doing so, also preserve the beam brightness at levels never previously achieved. This concept has the potential to advance DWA technology to a level that would make it suitable for the upgrades of the proposed Los Alamos MaRIE signature facility.

43 PARTICLE ACCELERATORS↗

Piezoelectricity in the Dielectric Component of Nanoscale Dielectric-Ferroelectric Superlattices

The origin of the functional properties of complex oxide superlattices can be resolved using time-resolved synchrotron x-ray diffraction into contributions from the component layers making up the repeating unit. The CaTiO{sub 3} layers of a CaTiO{sub 3}/BaTiO{sub 3} superlattice have a piezoelectric response to an applied electric field, consistent with a large continuous polarization throughout the superlattice. The overall piezoelectric coefficient at large strains, 54 pm/V, agrees with first-principles predictions in which a tetragonal symmetry is imposed on the superlattice by the SrTiO{sub 3} substrate.

36 MATERIALS SCIENCE↗

Structure and performance of dielectric films based on self-assembled nanocrystals with a high dielectric constant

Self-assembled films built from nanoparticles with a high dielectric constant are attractive as a foundation for new dielectric media with increased efficiency and range of operation, due to the ability to exploit nanofabrication techniques and emergent electrical properties originating from the nanoscale. However, because the building block is a discrete one-dimensional unit, it becomes a challenge to capture potential enhancements in dielectric performance in two or three dimensions, frequently due to surface effects or the presence of discontinuities. This is a recurring theme in nanoparticle film technology when applied to the realm of thin film semiconductor and device electronics. We present the use of chemically synthesized. (Ba; Sr)TiO3 nanocrystals, and a novel deposition-polymerization technique, as a means to fabricate the dielectric layer. The effective dielectric constant of the film is tunable according to nanoparticle size, and effective film dielectric constants of up to 34 are enabled. Wide area and multilayer dielectrics of up to 8 cm(2) and 190 nF are reported, for which the building block is an 8 nm nanocrystal. We describe models for assessing dielectric performance, and distinct methods for improving the dielectric constant of a nanocrystal thin film. The approach relies on evaporatively driven assembly of perovskite nanocrystals with uniform size distributions in a tunable 7-30 nm size range, coupled with the use of low molecular weight monomer/polymer precursor chemistry that can infiltrate the porous nanocrystal thin film network post assembly. The intercrystal void space (low k dielectric volume fraction) is minimized, while simultaneously promoting intercrystal connectivity and maximizing volume fraction of the high k dielectric component. Furfuryl alcohol, which has good affinity to the surface of. (Ba; Sr ) TiO3 nanocrystals and miscibility with a range of solvents, is demonstrated

Huang, LM↗

Pattern formation in dielectric barrier discharges with different dielectric materials

The influence of dielectric material on the bifurcation and spatiotemporal dynamics of the patterns in dielectric barrier discharge in argon/air at atmospheric pressure is studied. It is found that pattern bifurcation sequences are different with different dielectric materials. The spatiotemporal dynamics of the hexagonal pattern in dielectric barrier discharge depends on the dielectric material. The hexagon pattern with glass dielectric is an interleaving of two rectangular sublattices appearing at different moments. The hexagon pattern with quartz dielectric is composed of one set of hexagonal lattice discharging twice in one half cycle of the applied voltage, one is at the rising edge and the other at the falling edge. It results in that the accumulation of wall charges in individual microdischarges in a hexagon pattern with quartz dielectric is greater than that with glass dielectric, which is in agreement with the electron density measurement by Stark broadening of Ar I 696.54 nm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-phase mixed media dielectric with macro dielectric beads for enhancing resistivity and breakdown strength

A two-phase mixed media insulator having a dielectric fluid filling the interstices between macro-sized dielectric beads packed into a confined volume, so that the packed dielectric beads inhibit electro-hydrodynamically driven current flows of the dielectric liquid and thereby increase the resistivity and breakdown strength of the two-phase insulator over the dielectric liquid alone. In addition, an electrical apparatus incorporates the two-phase mixed media insulator to insulate between electrical components of different electrical potentials. And a method of electrically insulating between electrical components of different electrical potentials fills a confined volume between the electrical components with the two-phase dielectric composite, so that the macro dielectric beads are packed in the confined volume and interstices formed between the macro dielectric beads are filled with the dielectric liquid.

42 ENGINEERING↗

Computationally efficient dielectric calculations of molecular crystals

The microscopic dielectric response is a key quantity for electronic materials such as organic semiconductors. Calculations of this response for molecular crystals are currently either expensive or rely on extreme simplifications such as multipole expansions which lack microscopic detail. We present an alternate approach using a microscopic analogue of the Clausius-Mossotti equation, which constructs the dielectric response of a crystal from an eigenvalue decomposition of the dielectric response of individual molecules. This method can potentially be used to examine the effects of defects, disorder, and surfaces on the dielectric properties of molecular solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Giant dielectric response and low dielectric loss in Al{sub 2}O{sub 3} grafted CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics

This study sheds light on the effect of alumina on dielectric constant and dielectric loss of novel CaCu{sub 3}Ti{sub 4}O{sub 12} composite ceramics. Alumina, at several concentrations, was deposited on the surface of CaCu{sub 3}Ti{sub 4}O{sub 12} particles via sol-gel technique. The dielectric constant significantly increased for all frequencies and the dielectric loss substantially decreased for low and intermediate frequencies. These observations were attributed to the change in characteristics of grains and grain boundaries. It was found that the insulating properties of the grain boundaries are improved following the addition of Al{sub 2}O{sub 3}. The relative density of CaCu{sub 3}Ti{sub 4}O{sub 12}/Al{sub 2}O{sub 3} composite ceramics decreased compared to the pure CaCu{sub 3}Ti{sub 4}O{sub 12} and the grain size was greatly changed with the alumina content affecting the dielectric properties. With the addition of alumina into CaCu{sub 3}Ti{sub 4}O{sub 12}, tighter interfaces formed. The 6%- and 10%-alumina ceramics showed the minimum dielectric loss and the maximum dielectric constant, respectively. Both the dielectric constant and loss tangent decreased in the 20%-alumina ceramic due to the formation of CuO secondary phase. It was revealed that Al serves as an electron acceptor decreasing the electron concentration, if Al{sup 3+} ions substitute for Ti{sup 4+} ions, and as an electron donor increasing the electron concentration, if Al{sup 3+} ions substitute for Ca{sup 2+} ions. We established a processing-microstructure-properties paradigm which opens new avenues for novel applications of CaCu{sub 3}Ti{sub 4}O{sub 12}/Al{sub 2}O{sub 3} composite ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of reaction time on the dielectric behaviour of reduced graphene oxide–layered cobalt hydroxide composite for high-k gate dielectrics

Highlights: • Disc-like layered cobalt hydroxide microparticles were synthesized on reduced graphene oxide using one-pot hydrothermal method. • An enhanced dielectric constant of 7.19 × 10{sup 6} with a capacitance of 2.44 × 10{sup −6} F was achieved at 100 Hz frequency. • A leakage current of a few mA was produced in the composites that find potential applications in high-k gate dielectrics. - Abstract: Reduced graphene oxide (RGO)–cobalt hydroxide [Co(OH){sub 2}] composite was synthesized using one-pot hydrothermal method. The frequency-dependent dielectric properties and leakage conduction mechanism were studied for the composite. Samples were made with different reaction times of 2, 4, 6 and 12 h for the same concentration of graphene oxide and cobalt nitrate at constant temperature and pH. A high dielectric constant of 7.19 × 10{sup 6} with a capacitance of 2.45 × 10{sup −6} F was achieved for a reaction time of 2 h, at 100 Hz frequency and 27 °C temperature. One order decrement in the dielectric constant (10{sup 5}) was found with an increase in time starting from 4 to 12 h. The leakage current characteristics revealed Schottky barrier-type conduction mechanism in the composites. Thus, RGO-Co(OH){sub 2} composite with a high dielectric constant, microcapacitance and large leakage current could be regarded as a potential high-k candidate, which has its application as a gate dielectric material in the fabrication of metal oxide semiconductor field effect transistor.

36 MATERIALS SCIENCE↗

Development of PLZT dielectrics on base-metal foils for embedded capacitors.

We have deposited Pb{sub 0.92}La{sub 0.08}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} (PLZT) films on nickel and copper substrates to create film-on-foil capacitors that exhibit excellent dielectric properties and superior breakdown strength. Measurements with PLZT films on LaNiO3-buffered Ni foils yielded the following: relative permittivity of 1300 (at 25 C) and 1800 (at 150 C), leakage current density of 6.6 x 10{sup -9} A/cm{sup 2} (at 25 C) and 1.4 x 10{sup -8} A/cm{sup 2} (at 150 C), and mean breakdown field strength {approx}2.5 MV/cm. With PLZT deposited directly on Cu foils, we observed dielectric constant {approx}1100, dielectric loss (tan {delta}) {approx}0.06, and leakage current density of 7.3 x 10{sup -9} A/cm{sup 2} when measured at room temperature.

36 MATERIALS SCIENCE↗

Efficiency enhancement of a dielectric barrier plasma discharge by dielectric barrier optimization

The characteristic feature of a dielectric barrier discharge (DBD) is the dielectric barrier placed between the electrodes. In the present work, the influence of the dielectric barrier to the properties of a DBD in air was investigated. Spectroscopic characterization of the DBD and electrical measurements were carried out. It was shown that the efficiency of a DBD can be considerably improved by optimizing the dielectric barrier. The dielectric material should possess an appropriate relative permittivity and thickness. For thin dielectric barriers, a high secondary emission coefficient becomes important. Additionally, the use of only one dielectric barrier is advantageous.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation on dielectric properties of atomic layer deposited Al{sub 2}O{sub 3} dielectric films

Al/Al{sub 2}O{sub 3}/p-Si Schottky barrier diodes (SBDs) were fabricated using atomic layer deposition technique in order to investigate dielectric properties of SBDs. For this purpose, admittance measurements were conducted at room temperature between −1 V and 3 V in the frequency range of 10 kHz and 1 MHz. In addition to the investigation of Al{sub 2}O{sub 3} morphology using atomic force microscope, dielectric parameters; such as dielectric constant (ε′), dielectric loss (ε″), dielectric loss tangent (tan δ), and real and imaginary parts of dielectric modulus (M′ and M″, respectively), were calculated and effect of frequency on these parameters of Al/Al{sub 2}O{sub 3}/p-Si SBDs was discussed. Variations in these parameters at low frequencies were associated with the effect of interface states in low frequency region. Besides dielectric parameters, ac electrical conductivity of these SBDs was also investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamical level-crossing model for the time-dependent electron emission from dielectric surfaces in symmetric dielectric barrier discharges

In field emission plasmas, electrons that initiate plasma formation come from the surface of a metallic electrode, or wall, with emission controlled by the electron-work function of the wall, and can be computed via the Fowler-Nordheim formula. Impinging ions modify the rate at which electrons leave the surface, and are accounted via the coefficient of secondary electron emission. However, in the case of dielectric surfaces, the microscopic mechanism by which electrons are emitted is not as well understood. While simulations of dielectric barrier discharge plasmas assume an initial density of electrons in a time-dependent simulation, whether the presence of electrons is a necessary ambient condition or whether it is a result of emission from a surface is not clear. This is particularly relevant in the context of micro and nanoscale plasma generators when surface-related effects become more important. Here we consider electron emission from dielectric surfaces in the context of dielectric barrier discharges. The configuration of interest consists of two parallel-plate metallic electrodes, each covered by a dielectric layer. Assuming that the initial electrons for plasma formation arise from the surface, we compute the rate of charge transfer from surfaces, which is a necessary, but not sufficient, condition for plasma formation. This paper presents the application of the theory of nonadiabatic transitions (dynamical level crossing) to the problem of electron emission from dielectric surfaces in dielectric barrier discharges. Furthermore, the microscopic model of electron transfer described here has potential applications in the design of micro and nanoscale plasma generators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗