Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffuse waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

On the Importance of Using Event-Specific Wave Diffusion Rates in Modeling Diffuse Electron Precipitation

A few to tens of keV electron precipitation that carries substantial energy source down to the upper atmosphere to create aurora is manifested as an important magnetosphere-ionosphere coupling process. The precipitation is usually caused by scattering processes associated with plasma waves in the magnetosphere. The scattering process is often quantified by wave diffusion rates that indicate how fast an electron is scattered. Global models commonly use diffusion coefficients that are derived from statistical wave models. However, due to the statistical nature, many localized, transient features could be smeared out. In this study, we investigate electron precipitation using event-specific diffusion coefficients that are obtained based on simultaneous in-situ measured/inferred, rather than statistical, chorus wave dynamics. We find that the application of the event-specific diffusion coefficients associated with a more dynamic and intense chorus wave model leads more electrons, particularly at several to tens of keV in the dawn-to-noon sector at L > 3, to precipitate than using statistical coefficients. Here, the new simulation roughly captures both the intensity and variability of the precipitating flux as detected by the NOAA/POES satellites. Ionospheric electron density in the lower E region (100–120 km) observed by the mid-latitude Millstone Hill radar is also much better reproduced, while the case using statistical diffusion coefficients underestimates the ionization rate. This study implies the importance of using event-specific diffusion rates in simulating the diffuse electron precipitation and understanding the magnetosphere-ionosphere coupling.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Stimulated excitation of thermal diffusion waves in a magnetized plasma pressure filament

Results are presented from basic heat transport experiments using a magnetized electron temperature filament that behaves as a thermal resonator. Using a small cathode source, low energy electrons are injected along the magnetic field into the afterglow of a pre-existing plasma forming a hot electron filament embedded in a colder plasma. A series of low amplitude, sinusoidal perturbations are added to the cathode discharge bias that creates an oscillating heat source capable of driving large amplitude electron temperature oscillations. Langmuir probes are used to measure the amplitude and phase of the thermal wave field over a wide range of driver frequencies. The results are used to verify the excitation of thermal waves, confirm the presence of thermal resonances, and demonstrate the diagnostic potential of thermal waves through measurement of the parallel thermal diffusivity.

Karbashewski, S. (ORCID:000000034988492X)↗
DOE OSTI2019

On the Relative Strength of Electric and Magnetic ULF Wave Radial Diffusion During the March 2015 Geomagnetic Storm

In this paper, we study electron radial diffusion coefficients derived from Pc4-Pc5 ultralow frequency (ULF) wave power during the intense geomagnetic storm on 17–18 March 2015. During this storm the population of highly relativistic electrons was depleted within 2 hr of the storm commencement. This radial diffusion, depending upon the availability of source populations, can cause outward radial diffusion of particles and their loss to the magnetosheath, or inward transport and acceleration. Analysis of electromagnetic field measurements from Geostationary Operational Environment Satellite (GOES), Time History of Events and Macroscale Interactions during Substorms (THEMIS) satellite, and ground-based magnetometers shows that the main phase storm-specific radial diffusion coefficients do not correspond to statistical estimates. Specifically, during the main phase, the electric diffusion ($D^{E}_{LL}$) is reduced, and the magnetic diffusion ($D^{B}_{LL}$) is increased, compared to empirical models based on Kp . Contrary to prior results, the main phase magnetic radial diffusion cannot be neglected. The largest discrepancies, and periods of dominance of $D^{B}_{LL}$ over $D^{E}_{LL}$, occur during intervals of strongly southward IMF. However, during storm recovery, both magnetic and electric diffusion rates are consistent with empirical estimates. Here, we further verify observationally, for the first time, an energy coherence for both $D^{B}_{LL}$ and $D^{E}_{LL}$ where diffusion coefficients do not depend on energy. We show that, at least for this storm, properly characterizing main phase radial diffusion, potentially associated with enhanced ULF wave magnetopause shadowing losses, cannot be done with standard empirical models. Modifications, associated especially with southward IMF, which enhance the effects of $D^{B}_{LL}$ and introduce larger main phase outward transport losses, are needed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Quantification of the Crack Evolution Process by Extracting Relevant Signal Components from Wave Propagation and Diffusive Transport Front Measurements

Wave propagation and diffusive transport phenomena in a geological rock sample undergoing crack evolution process are expected to interact with the mechanical discontinuities in the medium. The measurements of the signals associated with these phenomena can be used to assess and monitor the crack-driven micromechanical alterations in the rock. Different wave/diffusion phenomena, such as sonic propagation, pressure diffusion, and acoustic emission (AE), are sensitive to different elements of the mechanical discontinuities generated during the evolution of the crack clusters from initiation to coalescence. Sonic propagation, AE, and pressure diffusion monitoring have the potential to map the crack evolution because the transmitter-receiver arrays can be designed, arranged and tuned to (1) achieve maximum recovery of the scattered waveforms and travel times, (2) capture the later arrivals and multiple reflections, and (3) illuminate large rock volume. However, the structural/topological complexities of the mechanical discontinuities, complex distribution of the stress fields, complex mechanical alterations in media, and fluid redistribution in the crack system pose serious challenges for the detection and modeling of the crack evolution process (from here on, we will use the term ‘crack evolution process’ to mean that the crack evolution occurred under shallow crustal conditions). For purposes of accurately accounting such complexities and heterogeneities in the absence of reliable physical laws, simulation methods, and signal processing techniques, my early-career research proposal will develop and apply novel data-driven machine learning methods to: (1) extract signal components relevant to the various phases of crack evolution and (2) generate a 2D visual map of the crack evolution process.

58 GEOSCIENCES↗
DOE OSTI2021

The Impact of Anomalous Resistivity in Vacuum Contaminant Plasmas on the Electrothermal Instability

This manuscript presents an assessment of the electrothermal instability (ETI) in the presence of anomalous resistivity (AR) in vacuum contaminant plasmas (VCP) when applied to a magnetized liner inertial fusion (MagLIF)-like load.Pulsed-power driven dielectrically coated metallic liners, like in MagLIF, experience the current-driven electrothermal instability which occurs when a material’s resistivity changes with temperature and is subject to ohmic heating. Large scale pulsed-power facilities that use magnetically insulated transmission lines (MITL) have been shown to generate low-density plasma which enters the target chamber and coalesces around the load. The low-density high-temperature vacuum contaminant plasmas (VCP) can parasitically divert current from the load through causing a short in the anode-cathode gap inside the target chamber. Resistive magnetohydrodynamic (MHD) simulations of these VCP experience unphysical runaway ohmic heating due to under predicting the resistivity by using a purely collisional resistivity model.AR provides a physics-based way to address this runaway heating through increasing the resistivity in a proportional way with the drift speed. In this work, 1D simulations probe the effect that AR in VCP has on the magnetic diffusion rate, and 2D simulations show how this effect manifests in the nonlinear striation form of the ETI for a MagLIF-like load. Beryllium and aluminum dielectrically coated liners are used for the 1D and 2D simulations in this work. The1D simulations show that a VCP causes a delay in the current delivery to the load by upwards of 8 ns at 60 ns into atypical current pulse for an 1 × 10 7 A scale pulsed-power accelerator. The 2D simulations show the delay observed in the 1D simulations is reduced substantially (4 ns) by 2D turbulence that disrupts the VCP layer early in time. Here, the 2Dsimulated ETI growth varies across AR models, more so for the beryllium liner than the aluminum liner because the beryllium liner shows an enhanced rate of penetration for the magnetic diffusion wave in comparison to the aluminum liner. The 2D simulations show the bulk dielectric thickness varies across AR models with the Davidson AR model beingthe largest and the Buneman AR model being the smallest, and in connection with the thickness the Rayleigh-Taylor bubble-spike distances varies correspondingly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Enhancing high-order harmonic generation by controlling the diffusion of the electron wave packet

We experimentally study the enhancement of high-order harmonic generation (HHG) driven by synthesized ω <#comment/> − <#comment/> 3 ω <#comment/> laser fields, where we control whether the ionization rate or the electron wave packet’s diffusion is the dominant enhancement mechanism. When minimizing the electron wave packet’s diffusion, the excursion times of the corresponding electron trajectories are reduced by a factor of 2 or more. This result is important for imaging techniques that use the returning electron wave packet to probe the remaining ion. Furthermore, we achieve a 10 × <#comment/> to 3800 × <#comment/> enhancement of the harmonic yield driven by the bichromatic fields relative to that of an optimized single-color field, showing that the bichromatic fields improve HHG’s capability as a light source. We also measure that the two-color field’s harmonics have half the divergence angle compared to their single-color counterpart, suggesting that the “short” electron trajectories play a more prominent role compared to their “long” trajectory counterparts, thus improving the wavefront of the emerging harmonic beam.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

A Frequency Domain Methodology for Quantitative Evaluation of Diffuse Wavefield With Applications to Seismic Imaging

Abstract Ambient Noise Imaging (ANI) of subsurface structures relies on seismic interferometry of diffuse seismic wavefields. However, the lack of effective methods to quantify and identify highly diffuse waves hampers applications of ANI, particularly in evaluating seismic attenuation and monitoring structural changes with high temporal resolution. Conventional ANI approaches require data normalization, which effectively suppresses the non‐diffuse component with large amplitude but also results in significant loss of amplitude and phase information in the continuous seismic records. In this study, we propose a frequency domain method to quantitatively evaluate the degree of diffuseness of seismic wavefields by analyzing their statistical characteristics of modal amplitudes for stationarity and randomness. Tests on synthetic waveform and field nodal records show that the proposed method can effectively distinguish between diffuse and non‐diffuse waveforms for either single‐ or three‐component data. As an application, we identify a 60‐s‐long diffuse coda of a local M 2.2 earthquake recorded by a dense nodal array on the San Jacinto Fault Zone, and successfully extract high‐quality dispersion curve andQ‐value without performing data normalization. These results are consistent with those obtained by conventional methods that assess the correlation between coherency and the Green's function, and by modeling ballistic waves generated by road traffic. Our proposed method can advance the imaging of subsurface velocity and attenuation structures as well as monitoring temporal changes for scientific studies and engineering applications.

Geochemistry & Geophysics↗
DOE OSTI2022

Effects of EMIC Wave-Driven Proton Precipitation on the Ionosphere

In this report we investigate the proton precipitation caused by electromagnetic ion cyclotron (EMIC) waves and its impact on the ionosphere with the self-consistent ring current-atmosphere interactions model (RAM-SCBE) coupled with an ionospheric particle transport model Global Airglow (GLOW). The EMIC wave diffusion process causes significant precipitation of tens of keV protons, particularly in the afternoon to midnight sector. These precipitating energetic protons further impact the ionosphere-thermosphere and contribute to the ionization in the E/F regions. The integrated auroral conductance is significantly enhanced in the dusk-to-midnight sector. Although the EMIC waves do not directly interact with the ring current electrons, after the EMIC wave scattering included in the model, remarkable changes are found in the global distribution of precipitating electron flux. This means that the addition of proton precipitation driven by EMIC waves results in feedback effects on the ring current electron dynamics through the circulation system. Validation is also conducted by comparing the simulated precipitation flux and ionospheric electron density with observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Thermal Conductivity Degradation in High Burnup U-Pu-Zr Fuel

Recent advancements in the characterization of irradiated U-Pu-Zr fuels have revealed complexities that challenge existing understanding of constituent redistribution. Traditionally, models have proposed three concentric regions within the fuel, each characterized by distinctive phases and porosity. However, through detailed analysis of high burnup U-Pu-Zr, we discovered the presence of four distinct constituent redistribution regions. Particularly novel is the observation of significant Pu redistribution, a previously unreported phenomenon that necessitates a reevaluation of current models. This work aims to delve deeper into these findings, seeking to correlate mesoscale measurements of thermal diffusivity and respective thermal conductivity with the phases present in each redistribution region. To achieve this objective, we employed mesoscale thermoreflectance methods using the unique, Idaho National Laboratory (INL) developed, Thermal Conductivity Microscope (TCM) at INL’s Irradiated Materials Characterization Laboratory. The TCM employs two tightly focused lasers: one for heating to generate periodic thermal waves in the substrate, and another spatially separated probe laser to detect changes in the optical reflectivity of the gold-coated substrate resulting from thermal wave diffusion. We conducted several thermal diffusivity measurements within each region of constituent redistribution of a U-19Pu-10Zr fuel pin cross section irradiated to 11 at. % burnup. The TCM measurement positions strategically aligned with transmission electron microscopy (TEM) lift-out locations previously collected from the fuel sample. Complementary microstructural analysis techniques such as optical and scanning electron microscopy (OM/SEM), electron probe microanalysis for chemical compositions, and TEM-based selective area electron diffraction (SAED) analysis for crystallographic insights into each phase were also utilized. This comprehensive approach allowed us to correlate local thermal diffusivity data with microstructural characteristics, enabling the computation of local thermal conductivity at each position. The significance of this contribution lies in its pioneering use of the TCM for ternary fuel mesoscale examination, shedding light on the previously overlooked effects of Pu redistribution on local thermal conductivity. By informing current models capturing constituent redistribution and heat transfer, our findings pave the way for more accurate predictions of metallic fuel performance. Moreover, this work sets the stage for future comparisons with similar TCM examinations on U-19Pu-10Zr fuels at ultra-low burnup, facilitating a comprehensive understanding of thermal property changes across different burnup levels. Ultimately, our study not only enriches our understanding of the thermophysical properties of individual redistribution regions within U-Pu-Zr fuel but also offers valuable insights for the design and operational parameters of proposed next-generation fast reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

The advancing wave front on a sloping channel covered by a rod canopy following an instantaneous dam break

The drag coefficient Cd for a rigid and uniformly distributed rod canopy covering a sloping channel following the instantaneous collapse of a dam was examined using flume experiments. The measurements included space x and time t high resolution images of the water surface h(x, t) for multiple channel bed slopes So and water depths behind the dam Ho along with drag estimates provided by sequential load cells. Using these data, an analysis of the Saint-Venant equation (SVE) for the front speed was conducted using the diffusive wave approximation. An inferred Cd=0.4 from the h(x, t) data near the advancing front region, also confirmed by load cell measurements, is much reduced relative to its independently measured steady-uniform flow case. This finding suggests that drag reduction mechanisms associated with transients and flow disturbances are more likely to play a dominant role when compared to conventional sheltering or blocking effects on Cd examined in uniform flow. The increased air volume entrained into the advancing wave front region as determined from an inflow–outflow volume balance partly explains the Cd reduction from unity.

Mechanics↗
DOE OSTI2021

Population balance modeling of polyurethane foam formation with pressure‐dependent growth kernel

Abstract Polyurethane foams are widely used materials often chosen for their useful characteristics such as low thermal conductivity, ease of application, and high strength‐to‐weight ratios. Computational models are needed to predict the dynamics of the flow and expansion, and the resulting material properties, to improve manufacturing processes. In this paper, a model for PMDI, a water‐blown polyurethane foam, is presented. By extending a kinetics‐based approach by adding bubble‐scale information via a population balance equation (PBE) using the quadrature method of moments, we can track bubble size distributions during foaming. We present results from a three‐dimensional computational fluid dynamics model using arbitrary Lagrangian–Eulerian interface tracking implemented in finite element software. The model compares favorably with experimental data, including dynamics, bubble distributions measured by both camera and diffusion wave spectroscopy, and post‐test bubble size from scanning electron microscopy and density measurements from x‐ray computed tomography.

Ortiz, Weston↗
DOE OSTI2022

Ultrasonic nondestructive evaluation of additively manufactured wear coatings

Here, this work pertains to the nondestructive evaluation of additively deposited coatings using ultrasound measurements. The specific objective was to evaluate using ultrasound surface wave measurements the quality of Stellite 21 coatings deposited on Inconel 718 substrates by the directed energy deposition (DED) additive manufacturing (AM) process. The surface wave speed and diffuse backscatter amplitude of the ultrasound waves were correlated with both cracking and warpage of the coating. This research is important, because, the integrity of DED-processed coatings currently requires a combination of destructive metallographic studies and X-ray computed tomography analysis, which are both expensive and time consuming. Instead of using a normal incidence configuration for the ultrasound measurements, the surface-wave approach allows the inspection of the near surface coating integrity. Three different frequencies were used to excite surface waves because each frequency has a different penetration depth. The signals obtained were used to quantify and compare the surface wave speed and surface wave-diffuse ultrasonic backscatter amplitude from five different DED-processed Stellite coated samples. Considering destructive metallurgical characterization as a reference, surface wave measurements were found to be effective for examining coating integrity. Further, the backscatter amplitude of the surface waves was correlated with the crack density and warpage. These flaws also change the stress state of the Stellite coating and consequently the surface wave propagation speed and its scattering behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Whistler Waves Associated With Electron Beams in Magnetopause Reconnection Diffusion Regions

Abstract Whistler waves are often observed in magnetopause reconnection associated with electron beams. We analyze seven MMS crossings surrounding the electron diffusion region (EDR) to study the role of electron beams in whistler excitation. Waves have two major types: (a) Narrow‐band waves with high ellipticities and (b) broad‐band waves that are more electrostatic with significant variations in ellipticities and wave normal angles. While both types of waves are associated with electron beams, the key difference is the anisotropy of the background population, with perpendicular and parallel anisotropies, respectively. The linear instability analysis suggests that the first type of wave is mainly due to the background anisotropy, with the beam contributing additional cyclotron resonance to enhance the wave growth. The second type of broadband waves are excited via Landau resonance, and as seen in one event, the beam anisotropy induces an additional cyclotron mode. The results are supported by particle‐in‐cell simulations. We infer that the first type occurs downstream of the central EDR, where background electrons experience Betatron acceleration to form the perpendicular anisotropy; the second type occurs in the central EDR of guide field reconnection. A parametric study is conducted with linear instability analysis. A beam anisotropy alone of above ∼3 likely excites the cyclotron mode waves. Large beam drifts cause Doppler shifts and may lead to left‐hand polarizations in the ion frame. Future studies are needed to determine whether the observation covers a broader parameter regime and to understand the competition between whistler and other instabilities.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Effects of diffusion barriers on reaction wave stability in Co/Al reactive multilayers

Bimetallic, reactive multilayers are uniformly structured materials composed of alternating sputter-deposited layers that may be ignited to produce self-propagating mixing and formation reactions. These nanolaminates are most commonly used as rapid-release heat sources. The specific chemical composition at each metal/metal interface determines the rate of mass transport in a mixing and formation reaction. The inclusion of engineered diffusion barriers at each interface will not only inhibit solid-state mixing but also may impede the self-propagating reactions by introducing instabilities to wavefront morphology. Here, this work examines the effect of adding diffusion barriers on the propagation of reaction waves in Co/Al multilayers. The Co/Al system has been shown to exhibit a reaction propagation instability that is dependent on the bilayer thickness, which allows for the occurrence of unstable modes in otherwise stable designs from the inclusion of diffusion barriers. Based on the known stability criteria in the Co/Al multilayer system, the way in which the inclusion of diffusion barriers changes a multilayer's heat of reaction, thermal conductivity, and material mixing mechanisms can be determined. These factors, in aggregate, lead to changes in the wavefront velocity and stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Ecosystem fluxes of carbonyl sulfide in an old-growth forest: temporal dynamics and responses to diffuse radiation and heat waves

Carbonyl sulfide (OCS) has recently emerged as a tracer for terrestrial carbon uptake. While physiological studies relating OCS fluxes to leaf stomatal dynamics have been established at leaf and branch scales and incorporated into global carbon cycle models, the quantity of data from ecosystem-scale field studies remains limited. In this study, we employ established theoretical relationships to infer ecosystem-scale plant OCS uptake from mixing ratio measurements. OCS fluxes showed a pronounced diurnal cycle, with maximum uptake at midday. OCS uptake was found to scale within dependent measurements of CO 2 fluxes over a 60 m tall old-growth forest in the Pacific Northwest of the US (45°49'13.76" N,121 °57'06.88" W) at daily and monthly timescales under mid–high light conditions across the growing season in 2015. OCS fluxes were strongly influenced by the fraction of down welling diffuse light. Finally, we examine the effect of sequential heat waves on fluxes of OCS, CO 2 , and H 2 O. Our results bolster previous evidence that ecosystem OCS uptake is strongly related to stomatal dynamics,and measuring this gas improves constraints on estimating photosynthetic rates at the ecosystem scale.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Diffuse energy transport and coda-wave interferometry for resonant transmission between reverberant structures

Approximate analytic and numerical theories are developed with which to model, and compare with laboratory measurements, the diffuse ultrasonic field transmitted from one elastic body to another through a resonant coupling. Particular focus is on the sensitivity of the transmitted field to perturbations in the natural frequency of the coupling, and on the manifestation of such perturbations as time delays in the second body. Immediate application is to measurements of slow dynamic elastic nonlinearity. It is found that the developed approximate theories do a good job of predicting the time dependence of mean square transmitted signal and signal spectra. They also predict the time delays, both their erratic character and their means. Analytic dependence of these time shifts on the fractional frequency perturbation df/f is derived.

42 ENGINEERING↗
DOE OSTI2022

Lower‐Hybrid Wave Structures and Interactions With Electrons Observed in Magnetotail Reconnection Diffusion Regions

Abstract We investigate waves close to the lower‐hybrid frequency in 12 magnetotail reconnection electron diffusion region (EDR) events with guide field levels of near‐zero to 30%. In about half of the events, the wave vector has a small component along the current sheet normal, consistent with known lower‐hybrid drift wave properties, but the perpendicular magnetic field fluctuations can be comparable or greater than the parallel component, a feature unique to the waves inside and adjacent to EDRs. Another new wave property is that the wave vector has a significant component along the current sheet normal in some events and completely along the normal for one event. In 1/4 of the events, the term has a significant contribution to the wave electric field, possibly a feature of lower‐hybrid waves more likely to exist in the diffusion region than further away from the X‐line. Electron temperature variations are correlated with the wave potential, due to wave electric field acceleration and crossings at the corrugated separatrix region with different amounts of mixing between reconnection inflowing and outflowing populations. The latter also leads to the anti‐correlation between parallel and perpendicular temperature components. Using four‐spacecraft measurements, the magnetic field line twisting is demonstrated by the correlated fluctuations in and . The lower‐hybrid wave in the EDR of weak guide field reconnection may be generated near separatrices and penetrate to the mid‐plane or locally generated, and the latter possibility is beyond the prediction of previous reconnection simulations.

79 ASTRONOMY AND ASTROPHYSICS↗