Search NASA⌕ Search

SEARCH · Search NASA

Results for “double layer graphene”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Theoretical phase diagram of two-component composite fermions in double-layer graphene

Theory predicts that double layer systems realize “two-component composite fermions,” which are formed when electrons capture both intra- and inter-layer vortices, to produce a wide variety of new strongly correlated liquid and crystal states as a function of the layer separation. Recent experiments in double layer graphene have revealed a large number of layer-correlated fractional quantum Hall states in the lowest Landau level, many of which have not been studied quantitatively in previous theoretical works. We consider the competition between various liquid and crystal states at several of these filling factors (specifically, the states at total filling factors ν = 3/7, 4/9, 6/11, 4/7, 3/5, 2/3, and 4/5) to determine the theoretical phase diagram as a function of the layer separation. We compare our results with experiments and identify various observed states. In particular, we show that at small layer separations the states at total fillings ν = 3/7 and ν = 3/5 are partially pseudospin polarized, where pseudospin refers to the layer index. For certain fractions, such as ν = 3/7, interlayer correlations are predicted to survive to surprisingly large interlayer separations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Organic doping of rotated double layer graphene

Charge transfer techniques have been extensively used as knobs to tune electronic properties of two- dimensional systems, such as, for the modulation of conductivity \ mobility of single layer graphene and for opening the bandgap in bilayer graphene. The charge injected into the graphene layer shifts the Fermi level away from the minimum density of states point (Dirac point). In this work, we study charge transfer in rotated double-layer graphene achieved by the use of organic dopant, Tetracyanoquinodimethane. Naturally occurring bilayer graphene has a well-defined A-B stacking whereas in rotated double-layer the two graphene layers are randomly stacked with different rotational angles. This rotation is expected to significantly alter the interlayer interaction. Double-layer samples are prepared using layer-by-layer assembly of chemical vapor deposited single-layer graphene and they are identified by characteristic resonance in the Raman spectrum. The charge transfer and distribution of charges between the two graphene layers is studied using Raman spectroscopy and the results are compared with that for single-layer and A-B stacked bilayer graphene doped under identical conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Local, global, and nonlinear screening in twisted double-layer graphene

Significance Using scanning tunneling microscopy and numerical simulations we demonstrate that a graphene buffer sheet placed underneath an atomically thin layer is an extremely effective method to increase the quality of 2D electron systems without modifying their electronic structure and without compromising the gating capabilities. We show that owing to its remarkable nonlinear screening capability the graphene buffer layer provides better shielding from substrate-induced perturbations than either increasing the distance to the substrate or doubling the carrier density, or even than using a graphene bilayer.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Double-layer graphene optical modulators and methods of fabrication thereof

This disclosure provides systems, methods, and apparatus related to optical modulators. In one aspect, a device includes a substrate, a first electrically insulating material disposed over the substrate, a first graphene layer and a second graphene layer disposed in the first electrically insulating material and being separated by the first electrically insulating material, and a waveguide disposed on the first electrically insulating material. At least a portion of the second graphene layer overlays at least a portion of the first graphene layer. The waveguide overlays both the first graphene layer and the second graphene layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Next-level composite fermions

A rich pattern of fractional quantum Hall states in graphene double layers can be naturally explained in terms of two-component composite fermions carrying both intra- and inter-layer vortices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Electronic Structure of Double-Layer Epitaxial Graphene on SiC(0001) Modified by Gd Intercalation

In this work, we systematically study the effects of Gd adsorption and intercalation on the electronic band structure of double-layer epitaxial graphene on Si-terminated SiC(0001) by first-principles calculations. We show that Gd adsorption and intercalation exhibit strong effects on the coupling between the graphene layers and between the buffer layer and substrate. Different adsorption/intercalation geometries can result in very different electron band structures. The number of Dirac cones and the positions of the Dirac cones relative to the Fermi level can be effectively manipulated through controlling the Gd adsorption/intercalation geometries. Our calculations provide useful insights to guide the experimental design of graphene-based materials with desirable functionalities for applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Dependence of electron transfer dynamics on the number of graphene layers in π-stacked 2D materials: insights from ab initio nonadiabatic molecular dynamics

Recent time-resolved transient absorption studies demonstrated that the rate of photoinduced interfacial charge transfer (CT) from Zn-phthalocyanine (ZnPc) to single-layer graphene (SLG) is faster than to double-layer graphene (DLG), in contrast to the expectation from Fermi's golden rule. We present the first time-domain non-adiabatic molecular dynamics (NA-MD) study of the electron injection process from photoexcited ZnPc molecules into SLG and DLG substrates. Our calculations suggest that CT occurs faster in the ZnPc/SLG system than in the ZnPc/DLG system, with 580 fs and 810 fs being the fastest components of the observed CT timescales, respectively. The computed timescales are in close agreement with those reported in the experiment. The computed CT timescales are determined largely by the magnitudes of the non-adiabatic couplings (NAC), which we find to be 4 meV and 2 meV, for the ZnPc/SLG and ZnPc/DLG systems, respectively. The transitions are driven mainly by the ZnPc out-of-plane bending mode at 1100 cm -1 and an overtone of fundamental modes in graphene at 2450 cm -1 . We find that dephasing occurs on the timescale of 20 fs and is similar in both systems, so decoherence does not notably change the qualitative trends in the CT timescales. We highlight the importance of proper energy level alignment for capturing the qualitative trends in the CT dynamics observed in experiment. In addition, we illustrate several methodological points that are important for accurately modeling nonadiabatic dynamics in the ZnPc/FLG systems, such as the choice of surface hopping methodology, the use of phase corrections, NAC scaling, and the inclusion of Hubbard terms in the density functional and molecular dynamics calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Preparation of a membrane-sealed cell for studying catalyst nanoparticles in flowing gas with high vacuum x-ray photoelectron spectrometer

Here a sealing-style x-ray photoelectron spectroscopy study of the surface of a 1.0 wt. %Ni/TiO2 nanoparticle catalyst in a flowing mixture of CO and O2 at 1 bar was performed with a graphene membrane-sealed Si3N4 window-based miniature cell. We report the details on how a commercial Si3N4 window is modified before assembling a graphene membrane, how single-layer graphene membranes are transferred from their metal supports to the modified Si3N4 window, how a modified Si3N4 window covered with a double-layer graphene membrane is assembled onto a blank cell cap, how a nanoparticle catalyst is introduced to the cell cap and then the cell cap is installed onto a cell body to form a complete reaction cell, and how a complete cell is interfaced with a high vacuum chamber of an XPS system before an XPS study of 1.0 wt. %Ni/TiO2 catalyst surface in a flowing mixture for 0.2 bar CO and 0.8 bar O2 is performed. How the characterization of a catalyst using this type of graphene membrane-sealed Si3N4 window-based miniature cell is relevant to the finding of the actual surface chemistry of a catalyst during catalysis is discussed.

Instruments & Instrumentation↗
DOE OSTI2016

Characterisation of reduced graphene oxides prepared from natural flaky, lump and amorphous graphites

Highlights: • Natural flaky, lumpy and amorphous graphites were used to synthesis rGO. • Investigation the effect of the crystal morphology on the oxidation process of GrO and characteristics of prepared rGO. • Low graphitisation degree, big specific surface area and small lateral size were beneficial to the oxidation of graphite. - Abstract: The characterisation of reduced graphene oxides (rGOs) prepared from natural flaky, lumpy, and amorphous graphites using Hummers method was investigated. The prepared graphite oxides (GrOs) and rGOs were characterised by X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, UV–vis spectroscopy, atomic force microscopy and electrochemical performance. The results showed that amorphous graphite was much easier to oxidise than lumpy and flaky graphites and was preferable for preparing single or double layer graphene because low graphitisation degree, high defect degree, high specific surface area and small crystal size were beneficial for (1) the oxidants to attack the exposed carbon atoms, (2) the intercalation of oxidants, and (3) the diffusion of oxidants between graphitic layers. In addition, rGO synthesised from amorphous graphite had the most defects and the smallest size of the in-plane sp{sup 2} domains compared to those obtained from the other two nature graphites.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Interaction Between Graphene-Coated SiC Single Crystal and Liquid Copper

The wettability of graphene-coated SiC single crystal (C{sub Gn}/SiC{sup sc}) by liquid Cu (99.99%) was investigated by a sessile drop method in vacuum conditions at temperature of 1100 °C. The graphene layer was produced via a chemical vapor deposition routine using 4H-SiC single crystal cut out from 6″ wafer. A dispensed drop technique combined with a non-contact heating of a couple of materials was applied. The Cu drop was squeezed from a graphite capillary and deposited on the substrate directly in a vacuum chamber. The first Cu drop did not wet the C{sub Gn}/SiC{sup sc} substrate and showed a lack of adhesion to the substrate: the falling Cu drop only touched the substrate forming a contact angle of θ{sub 0} = 121° and then immediately rolled like a ball along the substrate surface. After settling near the edge of the substrate in about 0.15 s, the Cu drop formed an asymmetric shape with the right and left contact angles of different values (θ{sub R} = 86° and θ{sub L} = 70°, respectively), while in the next 30 min, θ{sub R} and θ{sub L} achieved the same final value of ~ 52°. The second Cu drop was put down on the displacement path of the first drop, and immediately after the deposition, it also did not wet the substrate (θ = 123°). This drop kept symmetry and the primary position, but its wetting behavior was unusual: both θ{sub R} and θ{sub L} decreased in 17 min to the value of 23° and next, they increased to a final value of 65°. Visual observations revealed a presence of ~ 2.5-mm-thick interfacial phase layer reactively formed under the second drop. Scanning electron microscopy (SEM) investigations revealed the presence of carbon-enriched precipitates on the top surface of the first Cu drop. These precipitates were identified by the Raman spectroscopy as double-layer graphene. The Raman spectrum taken from the substrate far from the drop revealed the presence of graphene, while that obtained from the first drop displacement path exhibited a decreased intensity of 2D peak. The results of SEM investigations and Raman spectroscopy studies suggest that the presence of graphene layer on the SiC substrate suppresses but does not completely prevent chemical interaction between liquid Cu drop and SiC. Both chemical degradation (etching) and mechanical degradation of the graphene layer during drop rolling due to high adhesion of the Cu drop to the SiC substrate are responsible for mass transfer through the 2nd drop/substrate interface that in turn results in significant changes of structure and chemistry of the drop and the interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Physical origin of enhanced electrical conduction in aluminum-graphene composites

In this study, the electronic and transport properties of aluminum-graphene composite materials were investigated using the ab initio plane wave density functional theory. The interfacial structure is reported for several configurations. In some cases, the face-centered aluminum (111) surface relaxes in a nearly ideal registry with graphene, resulting in a remarkably continuous interface structure. The Kubo–Greenwood formula and space-projected conductivity were employed to study electronic conduction in aluminum single- and double-layer graphene-aluminum composite models. The electronic density of states at the Fermi level is enhanced by the graphene for certain aluminum–graphene interfaces, thus improving electronic conductivity. In double-layer graphene composites, conductivity varies non-monotonically with temperature, showing an increase between 300 and 400 K at short aluminum-graphene distances, unlike the consistent decrease in single-layer composites.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Capacitive Energy Extraction by Few-Layer Graphene Electrodes

Capacitive double-layer expansion is a promising technology to harvest energy arising from the salinity difference between freshwater and seawater. Its optimal performance requires a careful selection of the operation potentials and electrode materials. While carbonaceous materials such as graphene and various forms of activated carbons are routinely used as the electrodes, there is little knowledge on how the quantum capacitance and the electric double-layer (EDL) capacitance, which are on the same order of magnitude, affect the capacitive performance. Toward understanding that from a theoretical perspective, here we study the capacitive energy extraction with graphene electrodes as a function of the number of graphene layers. The classical density functional theory is joined with the electronic density functional theory to obtain the EDL and the quantum capacitance, respectively. The theoretical results show that the quantum capacitance contribution plays a dominant role in extracting energy using the single-layer graphene, but its effect diminishes as the number of graphene layers increases. The overall extracted energy is dominated by the EDL contribution beyond about four graphene layers. Electrodes with more graphene layers are able to extract more energy at low charging potential. Here, because many porous carbons have nanopores with stacked graphene layers, our theoretical predictions are useful to identify optimal operation parameters for capacitive energy extraction with porous electrodes of different wall thickness.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Molecular Investigation of Oxidized Graphene: Anatomy of the Double-Layer Structure and Ion Dynamics

We investigated the influence of surface oxidization of planar graphene electrodes on charge storage and ion dynamics of supercapacitors. Our approach compared two distinct ionic liquid (IL) electrolytes: tetraethylammonium tetrafluoroborate solvated in acetonitrile (TEA-BF4/ACN) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide solvated in acetonitrile (EMIm-TFSI/ACN). Both experimental electrochemical tests and molecular dynamics (MD) simulations showed positive, electrolyte-specific influences of hydroxyl-free electrode interfaces on capacitance. In the EMIm-TFSI/ACN system, the hydroxylated surface, because of its strong interaction with anions, impeded surface charge storage. On the other hand, in the case of TEA-BF4/ACN, the distribution and orientation of ACN across the system exerted vital influence on the capacitance, especially on the positive hydroxyl-free electrode. Furthermore, MD simulations of ion mobility with respect to the electrode surface in the lateral and perpendicular directions revealed significantly slower diffusion performance on the oxidized surface. Our efforts enhanced the level of fundamental understanding of the effects of hydroxyl groups on electrode–electrolyte interfaces and resulting supercapacitor performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Graphene-oxide-supported CuAl and CoAl layered double hydroxides as enhanced catalysts for carbon-carbon coupling via Ullmann reaction

Two efficient catalyst based on CuAl and CoAl layered double hydroxides (LDHs) supported on graphene oxide (GO) for the carbon-carbon coupling (Classic Ullmann Homocoupling Reaction) are reported. The pure and hybrid materials were synthesised by direct precipitation of the LDH nanoparticles onto GO, followed by a chemical, structural and physical characterisation by electron microscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), surface area measurements and X-ray photoelectron spectroscopy (XPS). The GO-supported and unsupported CuAl-LDH and CoAl-LDH hybrids were tested over the Classic Ullman Homocoupling Reaction of iodobenzene. In the current study CuAl- and CoAl-LDHs have shown excellent yields (91% and 98%, respectively) at very short reaction times (25 min). GO provides a light-weight, charge complementary and two-dimensional material that interacts effectively with the 2D LDHs, in turn enhancing the stability of LDH. After 5 re-use cycles, the catalytic activity of the LDH/GO hybrid is up to 2 times higher than for the unsupported LDH. - Graphical abstract: CuAl- and CoAl-LDHs have shown excellent yields (91% and 98%, respectively) at very short reaction times (25 min). GO provides a light-weight, charge complementary, two-dimensional material that interacts effectively with the 2D LDHs, in turn enhancing the stability of LDH. - Highlights: • CuAl LDH/GO and CoAl LDH/GO hybrid materials with different LDH compositions were prepared. • Hybrids were fully characterised and their catalytic efficiency over the Classic Ullman Reaction was studied. • CuAl- and CoAl-LDHs have shown excellent yields (91% and 98%, respectively) in 25 min reaction times. • GO provides a light-weight, charge complementary, two-dimensional material that interacts effectively with the 2D LDHs. • After 5 re-use cycles, the catalytic activity of the LDH/GO hybrid is up to 2 times higher than for the unsupported LDH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗