Search NASA⌕ Search

SEARCH · Search NASA

Results for “downconversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Interplay between gain and loss in arrays of nonlinear plasmonic nanoparticles: toward parametric downconversion and amplification

With the help of a theoretical model and finite-difference time-domain (FDTD) simulations based on the hydrodynamic–Maxwell model, we examine the effect of difference-frequency generation (DFG) in an array of L-shaped metal nanoparticles (MNPs) characterized by intrinsic plasmonic nonlinearity. The outcomes of the calculations reveal the spectral interplay between gain and loss in the vicinity of the fundamental frequency of the localized surface plasmon resonances. Subsequently, we identify different array thicknesses and pumping regimes facilitating parametric amplification and spontaneous parametric downconversion. Our results suggest that the parametric amplification regime becomes feasible on a scale of hundreds of nanometers and spontaneous parametric downconversion on the scale of tens of nanometers, opening up new exciting opportunities for developing building blocks of photonic metasurfaces.

Shah, Syed A.↗

Interplay between phonon downconversion efficiency, density of states at Fermi energy, and intrinsic energy resolution for microwave kinectic inductance detectors

Microwave Kinetic Inductance detectors (MKIDs) have been recognized as a powerful new tool for single photon detection. These highly multiplexed superconducting devices give timing and energy measurement for every detected photon. However, the full potential of MKID single photon spectroscopy has not been reached , the achieved energy resolution is lower than expected from first principles. Here, we study the efficiency in the phonon downconversion process following the absorption of energetic photons in MKIDs. Assuming previously published material properties, we measure an average downconversion efficiency for three TiN resonators is $\eta$=0.14. We discuss how this efficiency can impact the intrinsic energy resolution of MKID, and how any uncertainty in the unknown density of electron states at the Fermi energy directly affects the efficiency estimations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Investigation of upconversion and downconversion fluorescence emissions from β-NaLn1F{sub 4}:Yb{sup 3+}, Ln2{sup 3+} (Ln1 = Y, Lu; Ln2 = Er, Ho, Tm, Eu) hexagonal disk system

Graphical abstract: Well-defined β-NaLn1F4:Yb{sup 3+}, Ln2{sup 3+} (Ln1 = Y, Lu; Ln2 = Er, Ho, Tm, Eu) hexagonal thin disks with a simple and user-friendly hydrothermal approach by using sodium citrate as a shape modifier. Much stronger UC and DC fluorescence emissions were observed in NaLuF{sub 4}-based hexagonal disks than that for NaYF{sub 4} counterparts. The strength of hypersensitive transitions is mainly attributed to the decrease of local symmetry Ln-F bond lengths in β-NaLuF{sub 4}. It will show a great potential in improving near-infrared conversion efficiency of silicon solar cells and removable sub-micro luminescent platforms. - Highlights: • Regular hexagonal disks (NaLnF{sub 4}) were synthesized by a simple hydrothermal method. • Much stronger UC and DC emissions were observed in NaLuF{sub 4}-based disks. • Stronger fluorescence emissions in NaLuF{sub 4}-based disks were explained reasonably. • NaLuF{sub 4}-based disks can act as a removable luminescent platform for nano-assembly. • NaLuF{sub 4}-based disks can be applied in improving efficiency of solar cells. - Abstract: Uniform hexagonal β-NaLn1F{sub 4}:Yb{sup 3+}, Ln2{sup 3+} (Ln1 = Y, Lu; Ln2 = Er, Ho, Tm, Eu) disks were synthesized with hydrothermal method in which the sodium citrate was used as a shape modifier. The experimental observation indicated that both upconversion and downconversion fluorescence emissions were significantly stronger in β-NaLuF{sub 4} than that for β-NaYF{sub 4}. It was found that the stronger hypersensitive transitions were mainly due to the increase of J–O parameter (Ω{sub 2}) in β-NaLuF{sub 4} host, while the stronger insensitive transitions were mainly caused by the stronger overlap of electron cloud that was induced by the decrease of Ln-F bond lengths. Additionally, the larger absorption strength in the near-infrared region is another important factor for the stronger fluorescence emissions. The current research has a great potential in improving near-infrared conversion efficiency of silicon solar cells.

36 MATERIALS SCIENCE↗

Near-infrared downconversion luminescence of SrMoO{sub 4}:Tm{sup 3+},Yb{sup 3+} phosphors

Graphical abstract: The calculated band structure of SrMoO{sub 4} and the visible and infrared emission spectra of SrMoO{sub 4}:1%Tm{sup 3+},10%Yb{sup 3+} phosphors under 283 nm excitation.▪ - Highlights: • Near-infrared downconversion luminescence of SrMoO{sub 4}:Tm{sup 3+},Yb{sup 3+} phosphors were systematically investigated. • The electronic structure of SrMoO{sub 4} was estimated by density functional theory. • The quenching concentration of Yb{sup 3+} ions approaches 10 mol%. • The energy transfer mechanism was discussed in detail. - Abstract: Tm{sup 3+} and Yb{sup 3+} codoped SrMoO{sub 4} phosphors were synthesized by the high-temperature solid-state reaction method. The structure, ultraviolet-visible diffuse reflectance spectra, photoluminescence, decay properties and theoretical energy transfer efficiency of the phosphors were investigated in detail. The electronic structure and band gap of SrMoO{sub 4} were estimated by density functional theory (DFT) calculation. The XRD results show that all the prepared phosphors can be readily indexed to scheelite-type structure. The strong visible emission around 473 nm from Tm{sup 3+} ({sup 1}G{sub 4} → {sup 3}H{sub 6}) and near-infrared (NIR) emission around 998 nm from Yb{sup 3+} ({sup 2}F{sub 5/2} → {sup 2}F{sub 7/2}) of the SrMoO{sub 4}:Tm{sup 3+},Yb{sup 3+} phosphors were observed under 283 nm excitation. The dependence of the visible and NIR emissions on Yb{sup 3+} concentration have also been investigated. The quenching concentration of Yb{sup 3+} ions approaches 10 mol%. In addition, the energy transfer processes and possible transfer routes were proposed.

36 MATERIALS SCIENCE↗

Broadband sensitization of downconversion phosphor YPO{sub 4} by optimizing TiO{sub 2} substitution in host lattice co-doped with Pr{sup 3+}-Yb{sup 3+} ion-couple

This study demonstrates a feasible and efficient route to alleviate the absorption problem of the terrestrial solar spectrum and enhance broadband luminescence from a promising down conversion powder phosphor YPO{sub 4} co-doped with Pr{sup 3+}-Yb{sup 3+} lanthanide ion-couple: incorporating a third sensitizing transition metal ion, e.g., Ti{sup 4+}. The x-ray powder diffraction results confirm the lattice substitution by the solid-state reaction doping rather than the formation of any secondary phase. The emission spectral results and the luminescence decay curve analysis show that the downconversion luminescence can be enhanced by 200%–300% and the quantum efficiency enhanced by more than 20% at the wavelength of around 980 nm, the best response spectrum for Si-based solar cells, by optimizing TiO{sub 2} doping concentration at 7 mol. %.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Terahertz stimulated parametric downconversion of a magnon mode in an antiferromagnet

Parametric amplification, where one signal is enhanced by the action of another, offers both practical utility for boosting weak signals and fundamental insights into the nonlinear coupling between degrees of freedom. In condensed matter systems, interactions between collective modes offer avenues for nonlinear coherent manipulation of coupled excitations and quantum phases. Antiferromagnets, with inherently coupled magnon modes, provide a promising platform for nonlinear control of spin waves and magnetization. However, nonlinear magnon-magnon interactions have been only partially elaborated, leaving key gaps in the prospects for potential ultrahigh-bandwidth magnonic signal processing. Here, we excite two distinct coherent magnon modes in an antiferromagnet and find that the magnon mode with a lower frequency undergoes amplification when the higher-frequency mode is driven. We unveil the nonlinear excitation pathways of this stimulated parametric downconversion process by using polarization-selective two-dimensional terahertz spectroscopy. Our work provides fundamental insights into nonlinear magnonics in antiferromagnets, laying the groundwork for forthcoming spintronic and magnonic devices.

Science & Technology - Other Topics↗

ZnCuInS/ZnSe/ZnS Quantum Dot-Based Downconversion Light-Emitting Diodes and Their Thermal Effect

The quantum dot-based light-emitting diodes (QD-LEDs) were fabricated using blue GaN chips and red-, yellow-, and green-emitting ZnCuInS/ZnSe/ZnS QDs. The power efficiencies were measured as 14.0 lm/W for red, 47.1 lm/W for yellow, and 62.4 lm/W for green LEDs at 2.6 V. The temperature effect of ZnCuInS/ZnSe/ZnS QDs on these LEDs was investigated using CIE chromaticity coordinates, spectral wavelength, full width at half maximum (FWHM), and power efficiency (PE). The thermal quenching induced by the increased surface temperature of the device was confirmed to be one of the important factors to decrease power efficiencies while the CIE chromaticity coordinates changed little due to the low emission temperature coefficients of 0.022, 0.050, and 0.068 nm/°C for red-, yellow-, and green-emitting ZnCuInS/ZnSe/ZnS QDs. These indicate that ZnCuInS/ZnSe/ZnS QDs are more suitable for downconversion LEDs compared to CdSe QDs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

SNR degradation in square-wave subcarrier downconversion

This article presents a study of signal-to-noise ratio (SNR) degradation in the process of square-wave subcarrier downconversion. The study shows three factors that contribute to the SNR degradation: the cutoff of the higher frequency components in the data, the approximation of a square wave with a finite number of harmonics, and nonideal filtering. Both analytical and simulation results are presented.

Feria, Y.↗

Visible quantum cutting through downconversion in GdPO{sub 4}:Tb{sup 3+} and Sr{sub 3}Gd(PO{sub 4}){sub 3}:Tb{sup 3+}

Visible quantum cutting has been observed in GdPO{sub 4}:Tb{sup 3+} upon Tb{sup 3+} 4f{sup 8}-4f{sup 7}5d{sup 1} excitation and host excitation, and in Sr{sub 3}Gd(PO{sub 4}){sub 3}:Tb{sup 3+} upon Tb{sup 3+} 4f{sup 8}-4f{sup 7}5d{sup 1} excitation. In the quantum cutting process, Tb{sup 3+} acts as a quantum cutter, which converts one short wavelength ultraviolet photon or one vacuum ultraviolet photon into more than one visible photon. The quantum cutting involves a cross-relaxation process between two neighboring Tb{sup 3+} and direct energy transfer between Tb{sup 3+} and Tb{sup 3+} or Tb{sup 3+} and Gd{sup 3+}, depending on the excitation wavelength. The quantum efficiency variation of GdPO{sub 4}:xTb{sup 3+} and Sr{sub 3}Gd(PO{sub 4}){sub 3}:xTb{sup 3+} shows a growing trend with increasing of Tb{sup 3+} content from x=1.5% to 13%. - Graphical abstract: The ratio of emission from {sup 5}D{sub 4} level to that attributed to {sup 5}D{sub 3} of Tb{sup 3+} and {sup 6}P{sub J} of Gd{sup 3+} under 210,196 and 157 nm excitations are much stronger than that under 273 nm excitation, indicating visible quantum cutting has occurred in GdPO{sub 4}:Tb{sup 3+} upon Tb{sup 3+} 4f{sup 8}-4f{sup 7}5d{sup 1} excitation and host excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Resonant Cascaded Downconversion

We analyze an optical parametric oscillator (OPO) in which cascaded down-conversion occurs inside a cavity resonant for all modes but the initial pump. Due to the resonant cascade design, the OPO presents two {chi}{sup (2)}-level oscillation thresholds that are therefore much lower than for a {chi}{sup (3)} OPO. This is promising for reaching the regime of an effective third-order nonlinearity well above both thresholds. Such a {chi}{sup (2)} cascaded device also has potential applications in frequency conversion to far-infrared regimes. But, most importantly, it can generate novel multipartite quantum correlations in the output radiation, which represent a step beyond squeezed or entangled light. The output can be highly non-Gaussian and therefore not describable by any semiclassical model. In this paper, we derive quantum stochastic equations in the positive-P representation and undertake an analysis of steady-state and dynamical properties of this system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Symbol signal-to-noise ratio loss in square-wave subcarrier downconversion

This article presents the simulated results of the signal-to-noise ratio (SNR) loss in the process of a square-wave subcarrier down conversion. In a previous article, the SNR degradation was evaluated at the output of the down converter based on the signal and noise power change. Unlike in the previous article, the SNR loss is defined here as the difference between the actual and theoretical symbol SNR's for the same symbol-error rate at the output of the symbol matched filter. The results show that an average SNR loss of 0.3 dB can be achieved with tenth-order infinite impulse response (IIR) filters. This loss is a 0.2-dB increase over the SNR degradation in the previous analysis where neither the signal distortion nor the symbol detector was considered.

Feria, Y.↗

Compositions and methods for the downconversion of light

The present invention generally relates to composition and methods for downconverting light. In some embodiments, the composition and methods comprise an organic material, a nanocrystal, and a ligand capable of facilitating energy transfer between the organic material and the nanocrystal. In certain embodiments, the nanocrystal has a first excited energy state with an energy less than a triplet energy state of the organic material. The organic material, in some embodiments, may be aromatic and/or include one or more pi-conjugated carbon-carbon double bonds. In some cases, incident light may be absorbed by the organic material to produce two triplet excitons. The triplet excitons may then transfer to the nanocrystal via the ligand, where they can undergo recombination, resulting in the formation low energy photons.

36 MATERIALS SCIENCE↗

High Efficiency, Illumination Quality OLEDs for Lighting

The goal of the program was to demonstrate a 45 lumen per watt white light device based upon the use of multiple emission colors through the use of solution processing. This performance level is a dramatic extension of the team's previous 15 LPW large area illumination device. The fundamental material system was based upon commercial polymer materials. The team was largely able to achieve these goals, and was able to deliver to DOE a 90 lumen illumination source that had an average performance of 34 LPW a 1000 cd/m{sup 2} with peak performances near 40LPW. The average color temperature is 3200K and the calculated CRI 85. The device operated at a brightness of approximately 1000cd/m{sup 2}. The use of multiple emission colors particularly red and blue, provided additional degrees of design flexibility in achieving white light, but also required the use of a multilayered structure to separate the different recombination zones and prevent interconversion of blue emission to red emission. The use of commercial materials had the advantage that improvements by the chemical manufacturers in charge transport efficiency, operating life and material purity could be rapidly incorporated without the expenditure of additional effort. The program was designed to take maximum advantage of the known characteristics of these material and proceeded in seven steps. (1) Identify the most promising materials, (2) assemble them into multi-layer structures to control excitation and transport within the OLED, (3) identify materials development needs that would optimize performance within multilayer structures, (4) build a prototype that demonstrates the potential entitlement of the novel multilayer OLED architecture (5) integrate all of the developments to find the single best materials set to implement the novel multilayer architecture, (6) further optimize the best materials set, (7) make a large area high illumination quality white OLED. A photo of the final deliverable is shown. In 2003, a large area, OLED based illumination source was demonstrated that could provide light with a quality, quantity, and efficiency on par with what can be achieved with traditional light sources. The demonstration source was made by tiling together 16 separate 6-inch x 6-inch blue-emitting OLEDs. The efficiency, total lumen output, and lifetime of the OLED based illumination source were the same as what would be achieved with an 80 watt incandescent bulb. The devices had an average efficacy of 15 LPW and used solution-processed OLEDs. The individual 6-inch x 6-inch devices incorporated three technology strategies developed specifically for OLED lighting -- downconversion for white light generation, scattering for outcoupling efficiency enhancement, and a scalable monolithic series architecture to enable large area devices. The downconversion approach consists of optically coupling a blue-emitting OLED to a set of luminescent layers. The layers are chosen to absorb the blue OLED emission and then luminescence with high efficiency at longer wavelengths. The composition and number of layers are chosen so that the unabsorbed blue emission and the longer wavelength re-emission combine to make white light. A downconversion approach has the advantage of allowing a wide variety of colors to be made from a limited set of blue emitters. In addition, one does not have to carefully tune the emission wavelength of the individual electro-luminescent species within the OLED device in order to achieve white light. The downconversion architecture used to develop the 15LPW large area light source consisted of a polymer-based blue-emitting OLED and three downconversion layers. Two of the layers utilized perylene based dyes from BASF AG of Germany with high quantum efficiency (>98%) and one of the layers consisted of inorganic phosphor particles (Y(Gd)AG:Ce) with a quantum efficiency of {approx}85%. By independently varying the optical density of the downconversion layers, the overall emission spectrum could be adjusted to maximize performance for lighting (e.g. blackbody temperature, color rendering and luminous efficacy) while keeping the properties of the underlying blue OLED constant. The success of the downconversion approach is ultimately based upon the ability to produce efficient emission in the blue. Table 1 presents a comparison of the current performance of the conjugated polymer, dye-doped polymer, and dendrimer approaches to making a solution-processed blue OLED as 2006. Also given is the published state of the art performance of a vapor-deposited blue OLED. One can see that all the approaches to a blue OLED give approximately the same external quantum efficiency at 500 cd/m{sup 2}. However, due to its low operating voltage, the fluorescent conjugated polymer approach yields a superior power efficiency at the same brightness.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Near-infrared down-conversion in rare-earth-doped chloro-sulfide glass GeS{sub 2}-Ga{sub 2}S{sub 3}-CsCl: Er, Yb

Chloro-sulfide glass with low phonon energy, GeS{sub 2}-Ga{sub 2}S{sub 3}-CsCl, is co-doped with Er and Yb. This active glass is a potential downconversion material for modifying the solar spectrum to improve the efficiency of solar cells. Two downconversion processes from visible to near infrared are observed. In the first process, an energy transfer between Er{sup 3+} ions and Yb{sup 3+} ions occurs. In that case, one photon is absorbed by the {sup 4}I{sub 15/2}{yields}{sup 2}H{sub 11/2} (Er{sup 3+}) transition and then two photons are emitted by {sup 2}F{sub 5/2}{yields}{sup 2}F{sub 7/2} (Yb{sup 3+}) and {sup 4}I{sub 13/2}{yields}{sup 4}I{sub 15/2} (Er{sup 3+}), respectively. In the second process, downconversion takes place from the charge-transfer state of Yb{sup 3+}-S{sup 2-} to the 4f states of Yb{sup 3+} ions, which leads to an intense excitation band between 400 nm and 600 nm, and an emission at 1000 nm. Quantum yields for downconversion are measured. The highest quantum yields of emission below 1200 nm and 1650 nm are equal to 51% and 76%, respectively.

36 MATERIALS SCIENCE↗