Search NASA⌕ Search

SEARCH · Search NASA

Results for “dye-sensitized solar cells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Space Environmental Testing of Dye-Sensitized Solar Cells

Recent advances in nanocrystalline dye-sensitized solar cells has lead NASA to investigate the potential of these devices for space power generation, Reported here is the first space environment characterization of these type of photovoltaic devices. Cells containing liquid electrolytes were exposed to simulated low-earth orbit conditions and their performance evaluated. All cells were characterized under simulated air mass zero (AMO) illumination. Complete cells were exposed to pressures less than 1 x 10(exp -7) torr for over a month, with no sign of sealant failure or electrolyte leakage. Cells from Solaronix SA were rapid thermal cycled under simulated low-earth orbit conditions. The cells were cycled 100 times from -80 C to 80 C, which is equivalent to 6 days in orbit. The best cell had a 4.6% loss in efficiency as a result of the thermal cycling,

Harris, Jerry D.↗
NASA NTRS2003

Dye-Sensitized Solar Cells for Space Power

During the course of this grant, dye-sensitized solar cells were prepared and characterized. The solar cells were prepared using materials (dyes, electrolytes, transparent conductive oxide coated glass, nanocrystalline TiO2) entirely prepared in-house, as well as prepared using materials available commercially. Complete cells were characterized under simulated AM0 illumination. The best cell prepared at NASA had an AM0 efficiency of 1.22% for a 1.1 sq cm cell. Short circuit current (Isc), open circuit voltage (Voc) and fill factor (FF) for the cell were 6.95 mA, 618 mV and 42.8%, respectively. For comparison purposes, two commercially prepared dye-sensitized solar cells were obtained from Solaronix SA, Aubonne, Switzerland. The Solaronix cells were also characterized under simulated AM0 illumination. The best cell from Solaronix had an active area of 3.71 sq cm and measured an AM0 efficiency of 3.16%. with Isc, Voc and FF of 45.80 mA, 669.6 mV and 52.3%, respectively. Both cells from Solaronix were rapid thermal cycled between -80 C and 80 C. Thermal cycling led to a 4.6% loss of efficiency in one of the cells and led to nearly a complete failure in the second cell.

Harris, Jerry D.↗
DOE OSTI2024

Multivariate degradation modeling using generalized cauchy process and application in life prediction of dye-sensitized solar cells

Recently, the Generalized Cauchy (GC) process has been applied to capture a Long Memory (LM) phenomenon in product degradation modeling and life prediction. Compared with the traditional fractional Brownian motion that captures the LM using a single Hurst parameter, the GC process has two free parameters (Hurst and fractal dimension parameters) that flexibly capture both global LM and local irregularity. However, all existing GC-based degradation models are for a single Degradation Characteristic (DC). In this article, motivated by a real degradation problem of dye-sensitized solar cells that jointly exhibits multiple DCs, global LM, local irregularity and DC-wise cross-correlation, we propose a novel GC-based Multivariate Degradation Model (GC-MDM) to simultaneously capture the aforementioned effects. A maximum likelihood estimation approach is developed to estimate parameters of the GC-MDM. Subsequently, product life prediction based on the GC-MDM is developed. The proposed GC-MDM is validated through a simulation study and a physical experiment of dye-sensitized solar cells. Furthermore, results show that the proposed GC-MDM fundamentally improves the life prediction accuracy in comparison with conventional degradation models which significantly misestimate the uncertainty of product life.

14 SOLAR ENERGY↗
DOE OSTI2025

Single Component Dye-Sensitized Solar Cells Enabled by Copper Chemistry: Introduction of the Retro Cell

The possibility of utilizing a single molecule to act as both a chromophore and a redox shuttle in a new configuration of a dye-sensitized solar cell (DSSC) is investigated. This design, termed a retro cell, exploits the copper chromophore, [Cu(dsbtmp) 2 ] + (dsbtmp = bis(2,9-di(sec-butyl)-3,4,7,8- tetramethyl-1,10-phenanthroline), which has been shown to have excited state lifetimes in excess of a microsecond, enabling sensitization of TiO 2 while dissolved in solution. The oxidized chromophore can then diffuse to the counter electrode to be regenerated. This concept simplifies the device components and fabrication and eliminates a charge transfer step compared to that of traditional DSSCs. Initial investigations show the concept is viable; however, the performance is suboptimal. We have found the addition of 4-tertbutylpyridine (TBP) to the electrolyte plays a crucial role in enabling solar energy conversion. Evidence of TBP displacing one of the dsbtmp ligands in the oxidized [Cu(dsbtmp) 2 ] 2+ complex has been presented, which likely plays an important role in reducing recombination and enabling charge collection. The performance-limiting steps and routes to improved performance and viability of a retro cell are further discussed.

14 SOLAR ENERGY↗
DOE OSTI2024

Enhanced performance of Bi 2 S 3 /TiO 2 heterostructure composite films for solar cell applications

Day to day energy production is shifting towards renewable energy sources as these sources become more economically viable while being less polluting to operate; solar energy has become one of the major sources of renewable energy. However, it currently relies on ultra-pure silicon ingots to produce commercial silicon photovoltaics, which prevents the cost of electricity being produced to compete with non-renewable energy production. A viable low-cost alternative for silicon based cells would be dye-sensitized solar cells (DSSCs), which are easier and cheaper to manufacture as they do not require expensive and delicate raw materials to make. Moreover, they could be made semi-flexible which allows for a greater variety of applications. A DSSC consists of three components, a photo-electrode, an electrolyte and a counter-electrode. When exposed to incident light, the complex photosensitizers in the photoelectrode release electrons which are transported to the external load, leaving the photoelectrode in an oxidized state. The electrons are collected by the counter electrode and used to reduce the electrolyte. This charged electrolyte then reduces the positively charged photoelectrode, allowing the process to begin again. To improve the efficiency of this process, we explore the use of bismuth sulfide (Bi 2 S 3 ) and titanium oxide (TiO 2 ) composite as photoelectrode material and investigate their impact on the efficiency of DSSC.

14 SOLAR ENERGY↗
NASA NTRS2014

Novel Materials, Processing and Device Technologies for Space Exploration with Potential Dual-Use Applications

We highlight results of a broad spectrum of efforts on lower-temperature processing of nanomaterials, novel approaches to energy conversion, and environmentally rugged devices. Solution-processed quantum dots of copper indium chalcogenide semiconductors and multiwalled carbon nanotubes from lower-temperature spray pyrolysis are enabled by novel (precursor) chemistry. Metal-doped zinc oxide (ZnO) nanostructured components of photovoltaic cells have been grown in solution at low temperature on a conductive indium tin oxide substrate. Arrays of ZnO nanorods can be templated and decorated with various semiconductor and metallic nanoparticles. Utilizing ZnO in a more broadly defined energy conversion sense as photocatalysts, unwanted organic waste materials can potentially be repurposed. Current efforts on charge carrier dynamics in nanoscale electrode architectures used in photoelectrochemical cells for generating solar electricity and fuels are described. The objective is to develop oxide nanowire-based electrode architectures that exhibit improved charge separation, charge collection and allow for efficient light absorption. Investigation of the charge carrier transport and recombination properties of the electrodes will aid in the understanding of how nanowire architectures improve performance of electrodes for dye-sensitized solar cells. Nanomaterials can be incorporated in a number of advanced higher-performance (i.e. mass specific power) photovoltaic arrays. Advanced technologies for the deposition of 4H-silicon carbide are described. The use of novel precursors, advanced processing, and process studies, including modeling are discussed from the perspective of enhancing the performance of this promising material for enabling technologies such as solar electric propulsion. Potential impact(s) of these technologies for a variety of aerospace applications are highlighted throughout. Finally, examples are given of technologies with potential spin-offs for dual-use or terrestrial applications.

solid state devices↗
NASA NTRS2015

Novel Materials, Processing, and Device Technologies for Space Exploration with Potential Dual-Use Applications

We highlight results of a broad spectrum of efforts on lower-temperature processing of nanomaterials, novel approaches to energy conversion, and environmentally rugged devices. Solution-processed quantum dots of copper indium chalcogenide semiconductors and multi-walled carbon nanotubes from lower-temperature spray pyrolysis are enabled by novel (precursor) chemistry. Metal-doped zinc oxide (ZnO) nanostructured components of photovoltaic cells have been grown in solution at low temperature on a conductive indium tin oxide substrate. Arrays of ZnO nanorods can be templated and decorated with various semiconductor and metallic nanoparticles. Utilizing ZnO in a more broadly defined energy conversion sense as photocatalysts, unwanted organic waste materials can potentially be re-purposed. Current efforts on charge carrier dynamics in nanoscale electrode architectures used in photoelectrochemical cells for generating solar electricity and fuels are described. The objective is to develop oxide nanowire-based electrode architectures that exhibit improved charge separation, charge collection and allow for efficient light absorption. Investigation of the charge carrier transport and recombination properties of the electrodes will aid in the understanding of how nanowire architectures improve performance of electrodes for dye-sensitized solar cells. Nanomaterials can be incorporated in a number of advanced higher-performance (i.e. mass specific power) photovoltaic arrays. Advanced technologies for the deposition of 4H-silicon carbide are described. The use of novel precursors, advanced processing, and process studies, including modeling are discussed from the perspective of enhancing the performance of this promising material for enabling technologies such as solar electric propulsion. Potential impact(s) of these technologies for a variety of aerospace applications are highlighted throughout. Finally, examples are given of technologies with potential spin-offs for dual-use or terrestrial applications.

thin films↗
DOE OSTI2025

Ambient Synthesis for Fe(II) Polypyridyl Complexes with an Order of Magnitude Increase in Charge-Transfer Excited-State Lifetimes over [Fe(bpy) 3 ] 2+

Replacing precious metals with abundant metals is an important research focus in photochemical energy conversion and storage to meet global energy demands. However, transition metal complexes (TMCs) based on abundant 3d metals typically possess photochemical disadvantages─such as short charge-transfer excited-state lifetimes─and molecular modifications have focused on optimizing the interplay of structure, dynamics, and energetics to overcome their limitations. One strategy to do so is the use of bespoke ligands that can extend the lifetimes of chemically useful excited states. Here, in this study, we report the synthesis and characterization of novel Fe(II) complexes featuring lengthy polypyridyl ligands that can be readily synthesized. Steady-state and transient absorption spectroscopies indicate that these complexes have desirable properties and their excited metal-to-ligand charge-transfer states live an order of magnitude longer than in the benchmark [Fe(bpy) 3 ] 2+ . This lifetime is largely preserved in the heteroleptic complexes, thereby enabling the preparation of asymmetric complexes. Additionally, we apply nonradiative transition theory to explain the long-time decay kinetics. In light of their ease of preparation and reasonable excited-state lifetimes, we suggest the use of these complexes in Fe(II) dye-sensitized solar cells, where the rate of charge injection would be competitive with increased lifetime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthesis and Characterization of Amorphous Lawsone Polymer Dots for Fluorescent Applications

In this work, a two-step hydrothermal/solvothermal process was developed to generate highly fluorescent lawsone polymer dots (LPDs) utilizing an inexpensive and abundant starting material, 2-hydroxy-1,4-napththoquinone (lawsone). This hydrothermal/solvothermal process produces LPDs that have excitation independent emission with well-defined electronic transitions. This two-step protocol provides a straightforward approach to remove unwanted small molecular fluorescence, which has plagued carbon dot systems, without the need for advanced chromatographic purification methods or steps. A series of spectroscopic, electrochemical, and theoretical experiments suggest that this process proceeds via a sequential dehydration and dehydrogenation pathway to cross-link the lawsone into a carbon dot structure. This polymerization process helps to stabilize and favor certain electronic transitions inherently present in the lawsone monomer. The generation of the LPDs results in a 2 order of magnitude increase in the emission intensity and a quantum yield of 37%. This behavior is likely the result of the cross-linked structure shielding these electronic states from deactivation caused by nonradiative processes such as vibrational coupling and excited state quenching from thermal deactivation and solvent collisions. This finding is consistent with a cross-linked enhanced emission (CEE) mechanism, as previously observed for other similar systems. The LPDs were then incorporated into a TiO2 photoanode and utilized as a photosensitizer in a dye-sensitized solar cell (DSSC) which showed an enhancement in photocurrent density over pure TiO2. We also prepared a derivative of the LPDs utilizing a diethylene triamine additive (nitrogen-doped lawsone polymer dots (N-LPDs)) using the same two-step protocol and demonstrated its potential as a fluorescence microscopy dye for imaging MDA-MB-231 cancer cells.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Molecular Switch Cobalt Redox Shuttle with a Tunable Hexadentate Ligand

Strong-field hexadentate ligands were synthesized and coordinated to cobalt metal centers to result in three new low-spin to low-spin Co(III/II) redox couples. The ligand backbone has been modified with dimethyl amine groups to result in redox potential tuning of the Co(III/II) redox couples from –200 to –430 mV versus Fc +/0 . The redox couples surprisingly undergo a reversible molecular switch rearrangement from five-coordinate Co(II) to six-coordinate Co(III) despite the ligands being hexadentate. The complexes exhibit modestly faster electron self-exchange rate constants of 2.2–4.2 M –1 s –1 compared to the high-spin to low-spin redox couple [Co(bpy) 3 ] 3 + /2 + at 0.27 M –1 s –1 , which is attributed to the change in spin state being somewhat offset by this coordination switching behavior. The complexes were utilized as redox shuttles in dye-sensitized solar cells with the near-IR AP25 + D35 dye system and exhibited improved photocurrents over the [Co(bpy) 3 ] 3 + /2 + redox shuttle (19.8 vs 18.0 mA/cm 2 ). Finally, future directions point toward pairing the low-spin to low-spin Co(II/III) tunable series to dyes with significantly more negative highest occupied molecular orbital potentials that absorb into the near-IR where outer sphere redox shuttles have failed to produce efficient dye regeneration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Design and fabrication of TiO 2 -based dye sensitized solar cells using plant-derived organic dyes

The utilization of solar energy, an abundant and renewable resource, shows great promise. Various technologies have been employed to capture this vast energy potential. In this study, the effectiveness of natural dye-sensitized solar cells (DSSCs) was explored through experimental and computational methods. Organic dyes derived from specific plant species were examined, with a solvent mixture of ethanol, methanol, and tetrahydrofuran used for extraction. A UV–vis spectrophotometer was utilized to measure the sensitizers’ optical characteristics. The study employed density functional theory (DFT), implemented in Gaussian 09 W software, to perform computational calculations. The B3LYP method and a basis set of 6-31G++(d,p) were chosen for optimizing the geometries and energetics of dye molecules. The DFT results indicated that the dye molecules had a bandgap in the range of 2.16–2.38 eV. The photochemical performance of all four fabricated DSSC-based devices was evaluated to be between 0.33% and 1.04%, and the Euryops pectinatus sensitizer demonstrated the highest efficiency of 1.04% among the studied sensitizers.

36 MATERIALS SCIENCE↗
DOE OSTI2025

ZnO quantum dot–molecule conjugates: Chemical interactions, charge dynamics, and spin polarization

Conjugates between molecules and quantum dots (QDs) have been explored for a range of potential applications from photocatalysis and photovoltaics to quantum information science technologies. A particularly ubiquitous material in many of these applications are ZnO QDs since they can accept and transport electrons and can also act as hosts for unique spin states. Conjugates between molecular light absorbers and ZnO QDs have been explored for decades as components in dye-sensitized solar cells. Recently, these materials have also attracted interest for their ability to produce spin-polarized states upon photoexcitation. The current paper employs a series of light absorbing perylene molecules with different ZnO QD sizes to explore key features of these QD–molecule conjugates: (1) chemical interactions, (2) charge dynamics, and (3) spin polarization. The chemical interactions between the molecules and QDs are determined with binding equilibria and reveal dramatic impact of ligand size. The charge transfer dynamics from photoexcited perylenes to ZnO QDs were found to depend exponentially on the linker length. Finally, time-resolved electron paramagnetic resonance experiments reveal that these conjugates generate spin-polarized states in the form of radical pairs and triplets. These spin states hold promise as potential qubits and also offer an avenue to efficiently sensitize molecular triplets.

Hernandez, Frida S. [Amherst College, MA (United S↗
DOE OSTI2024

Environmentally Friendly Production of High-Quality and Multifunctional Carbon Quantum Dots from Coal

Researchers from the University of Wyoming and the University of Utah worked jointly to study the valorization of coal to carbon quantum dots (CQDs), a value-added product with a broad spectrum of applications. The CQDs were produced by an environmentally facile hydrothermal method, and the experimental factors influencing the properties of CQDs were investigated. We subsequently explored the applications of CQDs as co-sensitizers of dye-sensitized solar cells (DSSC) and photocatalysts of water treatment. As an outlook, techno-economic and environmental analysis studied the feasibility of mass production of CQDs.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS2002

Thin-film Organic-based Solar Cells for Space Power

Recent advances in dye-sensitized and organic polymer solar cells have lead NASA to investigate the potential of these devices for space power generation. Dye-sensitized solar cells were exposed to simulated low-earth orbit conditions and their performance evaluated. All cells were characterized under simulated air mass zero (AM0) illumination. Complete cells were exposed to pressures less than 1 x 10(exp -7) torr for over a month, with no sign of sealant failure or electrolyte leakage. Cells from Solaronix SA were rapid thermal cycled under simulated low-earth orbit conditions. The cells were cycled 100 times from -80 C to 80 C, which is equivalent to 6 days in orbit. The best cell had a 4.6 percent loss in efficiency as a result of the thermal cycling. In a separate project, novel -Bridge-Donor-Bridge- Acceptor- (-BDBA-) type conjugated block copolymer systems have been synthesized and characterized by photoluminescence (PL). In comparison to pristine donor or acceptor, the PL emissions of final -B-D-B-A- block copolymer films were quenched over 99 percent. Effective and efficient photo induced electron transfer and charge separation occurs due to the interfaces of micro phase separated donor and acceptor blocks. The system is very promising for a variety high efficiency light harvesting applications. Under an SBIR contract, fullerene-doped polymer-based photovoltaic devices were fabricated and characterized. The best devices showed overall power efficiencies of approx. 0.14 percent under white light. Devices fabricated from 2 percent solids content solutions in chlorobenzene gave the best results. Presently, device lifetimes are too short to be practical for space applications.

Bailey, Sheila G.↗
NASA NTRS2001

Thin-Film Organic-Based Solar Cells for Space Power

Recent advances in dye-sensitized and organic polymer solar cells have lead NASA to investigate the potential of these devices for space power generation. Dye-sensitaized solar cells were exposed to simulated low-earth orbit conditions and their performance evaluated. All cells were characterized under simulated air mass zero (AM0) illumination. Complete cells were exposed to pressures less than 1 x 10 (exp -7)torr for over a month, with no sign of sealant failure or electrolyte leakage. Cells from Solaronix SA were rapid thermal cycled under simulated low-earth orbit conditions. The cells were cycled 100 times from -80 C to 80 C, which is equivalent to 6 days in orbit. The best cell had a 4.6% loss in efficiency as a result of the thermal cycling. In a separate project, novel -Bridge-Donor-Bridge-Acceptor- (-BDBA-) type conjugated block copolymer systems have been synthesized and characterized by photoluminescence (PL). In comparison to pristine donor or acceptor, the PL emissions of final -B-D-B-A- block copolymer films were quenched over 99%. Effective and efficient photo induced electron transfer and charge separation occurs due to the interfaces of micro phase separated donor and acceptor blocks. The system is very promising for a variety high efficiency light harvesting applications. Under an SBIR contract, fullerene-doped polymer-based photovoltaic devices were fabricated and characterized. The best devices showed overall power efficiencies of approximately 0.14% under white light. Devices fabricated from 2% solids content solutions in chlorobenzene gave the best results. Presently, device lifetimes are too short to be practical for space applications.

Bailey, Sheila G.↗
DOE OSTI2025

Understanding and controlling the fundamental photochemistry of protonic solar energy conversion (Final Scientific/Technical Report)

The selectivity and activity of most fuel-forming reactions are tunable by the concentration of electrons, holes, protons, and/or hydroxides. That is one reason why traditional solar energy conversion processes are used to drive these reactions, where light directly increases the concentration of electrons and holes. We, instead, took a different approach, using light to increase the concentration of protons and/or hydroxides. For this, we leveraged photophysical and solid-state physics theories, techniques, and design strategies previously developed for the study of traditional solar energy conversion processes. We designed and fabricated several materials platforms based on molecular photoacid and photobase dyes coupled with ion-exchange polymer membranes and assessed their fundamental photoelectrochemistry. We demonstrated control over built-in electric potentials, photovoltages, proton-transfer kinetics, and efficiency limits to our approach. Understanding the basic science of these dye-sensitized protonic membranes and their photochemical mechanisms is of use to the DOE-relevant processes of solar photochemical fuel formation, solar photodialytic desalination, and solar cells. Moreover, functional materials that we developed from this project may be of use to several broad-reaching fields and may provide the foundation for a completely new, inexpensive, and robust solar energy conversion technology.

14 SOLAR ENERGY↗