Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamical diffraction theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Large Angle Rocking Beam Electron Diffraction Utilizing Electron Direct Detector

Electron diffraction of a crystal is fundamentally a function of the potential of that crystal. The intensity of electron diffraction patterns is, as a result, sensitive to the charge density of atoms and bonding inside crystals. Experimentally, the traditional method to probe this information is quantitative Convergent Beam Electron Diffraction (CBED). Quantitative CBED or QCEBD is a method which uses dynamic diffraction theory to quantify CBED intensities and to extract information about crystal structure and bonding. The sensitivity of dynamical scattering is leveraged to measure crystal symmetry and crystal structure factors. At its limit, electron structure factors are measured at high accuracy allowing access to chemical bonding information, which corroborate theoretical calculations through multipole model refinements of the experimental charge density. The primary limit to QCBED is the requirement of a non-overlapping convergent beam. This subsequently limits QCBED to crystals with small unit cells which are stable under the focused probe.

Busch, Robert↗
DOE OSTI2020

Deep learning of interface structures from simulated 4D STEM data: cation intermixing vs. roughening ∗

Abstract Interface structures in complex oxides remain an active area of condensed matter physics research, largely enabled by recent advances in scanning transmission electron microscopy (STEM). Yet the nature of the STEM contrast in which the structure is projected along the given direction precludes separation of possible structural models. Here, we utilize deep convolutional neural networks (DCNN) trained on simulated 4D STEM datasets to predict structural descriptors of interfaces. We focus on the widely studied interface between LaAlO 3 and SrTiO 3 , using dynamical diffraction theory and leveraging high performance computing to simulate thousands of possible 4D STEM datasets to train the DCNN to learn properties of the underlying structures on which the simulations are based. We test the DCNN on simulated data and show that it is possible (with >95% accuracy) to identify a physically rough from a chemically diffuse interface and create a DCNN regression model to predict step positions. We quantify the applicability of the model to different thicknesses and the transferability of the approach. The method shown here is general and can be applied for any inverse imaging problem where forward models are present.

42 ENGINEERING↗
DOE OSTI2022

X-ray beam monitoring and wavelength calibration using four-beam diffraction

Rigorous dynamical theory calculations show that four-beam diffraction (4BD) can be activated only by a unique photon energy and a unique incidence direction. Thus, 4BD may be used to precisely calibrate X-ray photon energies and beam positions. Based on the principles that the forbidden-reflection 4BD pattern, which is typically an X-shaped cross, can be generated by instant imaging using the divergent beam from a point source without rocking the crystal, a detailed real-time high-resolution beam (and source) position monitoring scheme is illustrated for monitoring two-dimensional beam positions and directions of modern synchrotron light sources, X-ray free-electron lasers and nano-focused X-ray sources.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

A polarization-switch effect of silicon crystals under multiple-beam diffraction geometry

On the basis of rigorous dynamical-theory calculations, a complete X-ray polarization-switch effect of silicon crystals at the exact multiple-beam diffraction condition is demonstrated in this paper. The underlying physical mechanism of this unique phenomenon can be revealed using a simple multiple-wave propagation and interference model. The constructive and destructive interference of the multiple detoured-diffraction beams along the direction of the primary diffracted beam directly leads to the complete polarization switch. This phenomenon can be realized using both synchrotron and laboratory X-ray sources at many discrete wavelengths, and used to design a novel crystal-based polarizer to achieve a 90° polarization rotation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Quantum information approach to the implementation of a neutron cavity

Abstract Using the quantum information model of dynamical diffraction we consider a neutron cavity composed of two perfect crystal silicon blades capable of containing the neutron wavefunction. We show that the internal confinement of the neutrons through Bragg diffraction can be modelled by a quantum random walk. Furthermore, we introduce a toolbox for modelling crystal imperfections such as surface roughness and defects. Good agreement is found between the simulation and the experimental implementation, where leakage beams are present, modelling of which is impractical with the conventional theory of dynamical diffraction. Analysis of the standing neutron waves is presented in regards to the crystal geometry and parameters; and the conditions required for well-defined bounces are derived. The presented results enable new approaches to studying the setups utilizing neutron confinement, such as the experiments to measure neutron magnetic and electric dipole moments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

DXRD : a user-friendly suite of two- and multiple-beam dynamical X-ray diffraction programs

The DXRD program suite consisting of a series of dynamical theory programs is introduced for computing dynamical X-ray diffraction from single crystals. Its interactive graphical user interfaces (GUIs) allow general users to make complicated calculations with minimal effort. It can calculate plane-wave Darwin curves of single crystals (or multiple crystals) for both the Bragg and Laue cases, including grazing-incidence diffraction and backward diffraction (with Bragg angles approaching 90°). It is also capable of simulating rocking curves for divergent incident X-ray beams with finite bandwidths. A unique feature of DXRD is that it provides a convenient GUI-based multiple-beam diffraction program that can accurately compute arbitrary N-beam diffraction of any geometry using a universal 4N × 4N matrix method. DXRD also provides a mapping program for plotting all the multiple-beam diffraction lines (monochromator glitches) in the azimuth–energy coordinate system. All these functions make DXRD a convenient and powerful software tool for designing crystal-based synchrotron/X-ray optics (monochromators, analyzers, polarizers, phase plates etc.) and for crystal characterization, X-ray spectroscopy and X-ray diffraction teaching.

Bragg reflection↗
DOE OSTI2025

Coordinated Cation Transport in Ti 3 C 2 T x MXene Membranes

Membrane nanofiltration is an attractive strategy for the selective recovery of high-demand metals from wastewater and brine. Effective sieving of ions in aqueous environments will require precise control over membranes’ nanochannel size and chemistry. Ti 3 C 2 T x MXene is an environmentally stable 2D material that can be processed into laminar membranes containing nanoscale interlayer spaces. The MXene interlayer environment depends on the ion species and amount of water intercalated between MXene sheets, and it is the major factor governing permeation and selectivity through MXene membranes. Coordinated ion–ion and ion-interlayer dynamics in the presence of complex mixtures can impact ion permeability and selectivity. Herein, we observe strong competitive effects between different cations (Li + , Na + , and Ca 2+ ) in binary mixtures, resulting in reduced selectivity when compared with single-salt permeability ratios. X-ray diffraction, molecular dynamics, and density functional theory simulations support the conclusion that cations with stronger attraction to MXene flakes can preferentially occupy the MXene nanochannels and hinder other ions via charge or size exclusion. In conclusion, elucidation of ion transport behavior in MXene under complex conditions will allow for more rational design of efficient ion-sieving membranes.

2D Materials↗
NASA NTRS1976

Crystals for astronomical X-ray spectroscopy

Crystal spectrometric properties and the factors that affect their measurement are discussed. Theoretical and experimental results on KAP are summarized and theoretical results based on the dynamical theory of X-ray diffraction are given for the acid phthalates as well as for the commonly used planes of ADP, PET and EDDT. Anomalous dispersion is found to be important for understanding the details of crystal Bragg reflection properties at long X-ray wavelengths and some important effects are pointed out. The theory of anomalous dispersion is applied to explain the anomalous reflectivity exhibited by KAP at 23.3 A.

Burek, A.↗
DOE OSTI2021

Effect of lattice excitations on transient near-edge x-ray absorption spectroscopy

Here, time-dependent and constituent-specific spectral changes in soft near-edge x-ray absorption spectroscopy (XAS) of an [Fe/MgO] 8 metal/insulator heterostructure after laser excitation are analyzed at the O K-edge with picosecond time resolution. The oxygen absorption edge of the insulator features a uniform intensity decrease of the fine structure at elevated phononic temperatures, which can be quantified by a simple simulation and fitting procedure presented here. Combining XAS with ultrafast electron diffraction measurements and ab initio calculations demonstrates that the transient intensity changes in XAS can be assigned to a transient lattice temperature. Thus, the sensitivity of transient near-edge XAS to phonons is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Magnetic field induced phases and spin Hamiltonian in Cs 2 CoBr 4

Magnetic structures and spin excitations are studied across the phase diagram of the geometrically frustrated S = 3/2 quantum antiferromagnet Cs 2 CoBr 4 in magnetic fields applied along the magnetic easy axis, using neutron diffraction, inelastic neutron scattering, and terahertz absorption spectroscopy. Here, the data are analyzed, where appropriate, using extended SU(4) linear spin wave theory. A minimal magnetic Hamiltonian is proposed based on measurements in the high-field paramagnetic state. It deviates considerably from the previously considered models. Additional dilatometry experiments highlight the importance of magnetoelastic coupling in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Effective field theory factorization for diffraction

We derive a factorization formula for coherent and incoherent ep diffraction using the soft collinear effective theory, utilizing multiple power expansion parameters to handle different kinematic regions. This goes beyond the known hard-collinear diffractive factorization to address the small-x Regge dynamics and Pomeron exchange from first principles. The effective field theory analysis also uncovers and factorizes an important irreducible incoherent background generated by color-nonsinglet exchange, dubbed “quasi-diffraction”, for which we calculate the associated Sudakov suppression. For unpolarized scattering we show that there are four diffractive structure functions at leading power, and point out the importance of studying ${F}_{3,4}^D$ through asymmetries, in addition to ${F}_{2,L}^D$. For the quasi-diffractive background, we make model independent predictions for ratios of the corresponding structure functions in a perturbative kinematic region. Our analysis also makes predictions for six leading-power spin-dependent structure functions. Finally, we provide connections to diffractive parton distributions, and assess the Ingelman-Schlein model. Our work lays a path for further QCD-based studies of diffraction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Nontrivial nanostructure, stress relaxation mechanisms, and crystallography for pressure-induced Si-I → Si-II phase transformation

Crystallographic theory based on energy minimization suggests austenite-twinned martensite interfaces with specific orientation, which are confirmed experimentally for various materials. Pressure-induced phase transformation (PT) from semiconducting Si-I to metallic Si-II, due to very large and anisotropic transformation strain, may challenge this theory. Here, unexpected nanostructure evolution during Si-I → Si-II PT is revealed by combining molecular dynamics (MD), crystallographic theory, generalized for strained crystals, and in situ real-time Laue X-ray diffraction (XRD). Twinned Si-II, consisting of two martensitic variants, and unexpected nanobands, consisting of alternating strongly deformed and rotated residual Si-I and third variant of Si-II, form {111} interface with Si-I and produce almost self-accommodated nanostructure despite the large transformation volumetric strain of -0.237. The interfacial bands arrest the {111} interfaces, leading to repeating nucleation-growth-arrest process and to growth by propagating {110} interface, which (as well as {111} interface) do not appear in traditional crystallographic theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Reversible Phase Transitions Enable Cyclic Isothermal CO 2 Capture in Redox‐Activated Perovskite‐Structured Sorbents

Sorption‐enhanced steam reforming and gasification using CO 2 sorbents enable the production of H 2 ‐rich syngas from carbonaceous feedstocks but are limited by significant temperature swings and sintering‐induced activity loss. Perovskite‐structured oxides are presented herein as sintering‐resistant, redox‐activated isothermal CO 2 sorbents capable of overcoming these challenges by releasing lattice oxygen to partially oxidize the carbonaceous feedstock while capturing CO 2 , shifting equilibrium toward H 2 production. Building on this, the structural and thermodynamic impact of Fe doping on the CO 2 sorption properties of SrMn 1‐ x Fe x O 3‐ δ is investigated for sorption‐enhanced reforming. Experimental results demonstrate that these sorbents enable isothermal production of high‐quality, H 2 ‐enriched syngas from carbonaceous feedstocks. Laboratory and synchrotron‐based powder X‐ray diffraction analyses, coupled with density functional theory calculations, reveal the structural dynamics and energy landscape of the SrMn 1‐ x Fe x O 3‐ δ perovskite system under reaction conditions, elucidating the solid‐state reaction pathway and the effect of Fe doping on the extent of carbonation.

CO2 capture↗
DOE OSTI2021

Measuring the structure and equation of state of polyethylene terephthalate at megabar pressures

Abstract We present structure and equation of state (EOS) measurements of biaxially orientated polyethylene terephthalate (PET, $$({\hbox {C}}_{10} {\hbox {H}}_8 {\hbox {O}}_4)_n$$ ( C 10 H 8 O 4 ) n , also called mylar) shock-compressed to ( $$155 \pm 20$$ 155 ± 20 ) GPa and ( $$6000 \pm 1000$$ 6000 ± 1000 ) K using in situ X-ray diffraction, Doppler velocimetry, and optical pyrometry. Comparing to density functional theory molecular dynamics (DFT-MD) simulations, we find a highly correlated liquid at conditions differing from predictions by some equations of state tables, which underlines the influence of complex chemical interactions in this regime. EOS calculations from ab initio DFT-MD simulations and shock Hugoniot measurements of density, pressure and temperature confirm the discrepancy to these tables and present an experimentally benchmarked correction to the description of PET as an exemplary material to represent the mixture of light elements at planetary interior conditions.

36 MATERIALS SCIENCE↗
NASA NTRS1976

Characterization of iron-doped lithium niobate for holographic storage applications

A comprehensive characterization of chemical and holographic properties of eight systematically chosen Fe:LiNbO3 crystals is performed in order to determine optimum performance of the crystals in holographic storage and display applications. The discussion covers determination of Fe(2+) and Fe(3+) ion concentrations in Fe:LiNbO3 system from optical absorption and EPR measurements; establishment of the relation between the photorefractive sensitivity of Fe(2+) and Fe(3+) concentrations; study of the spectral dependence, the effect of oxygen annealing, and of other impurities on the photorefractive sensitivity; analysis of the diffraction efficiency curves for different crystals and corresponding sensitivities with the dynamic theory of hologram formation; and determination of the bulk photovoltaic fields as a function of Fe(2+) concentrations. In addition to the absolute Fe(2+) concentration, the relative concentrations of Fe(2+) and Fe(3+) ions are also important in determining the photorefractive sensitivity. There exists an optimal set of crystal characteristics for which the photorefractive sensitivity is most favorable.

Shah, R. R.↗
DOE OSTI2026

Hydride and Seek: Comparing Crystallographic Hydride Placement Techniques with an Open-Shell Cobalt Complex

Locating hydrides is crucial in organometallic chemistry but difficult to do accurately using X-ray diffraction. Electron diffraction has been proposed as a way to overcome this problem but has not been systematically compared to neutron diffraction and to quantum crystallography (Hirshfeld atom refinement, HAR) to test this hypothesis. Here, we present a comparative analysis of methods for a terminal cobalt hydride complex by comparing a single-crystal neutron diffraction reference structure to results from single-crystal X-ray diffraction with and without Hirshfeld atom refinement (HAR, NoSpherA2), density functional theory (DFT), and electron diffraction (3D-ED/MicroED) refined under kinematical and dynamical formalisms. Conventional X-ray diffraction gives lower precision than neutron diffraction as expected. Despite expected improvements, HAR gives systematic deviation from the neutron benchmark. Interestingly, optimized DFT equilibrium geometries are closer to the neutron value than the value from HAR. On the other hand, electron diffraction with a high-quality data set coupled with dynamical refinement localizes the hydride in difference maps and gives excellent agreement with the neutron data. Dynamical refinement is crucial, as kinematical refinement does not allow assignment of a hydride peak. This cross-modal comparison defines the conditions under which 3D-ED/MicroED delivers high-precision metal–hydride distances for this open-shell cobalt hydride.

anions↗
DOE OSTI2024

Exploring Cr and molten salt interfacial interactions for molten salt applications

Molten salts play an important role in various energy-related applications such as high-temperature heat transfer fluids and reaction media. However, the extreme molten salt environment causes the degradation of materials, raising safety and sustainability challenges. A fundamental understanding of material–molten salt interfacial evolution is needed. This work studies the transformation of metallic Cr in molten 50/50 mol% KCl–MgCl 2 via multi-modal in situ synchrotron X-ray nano-tomography, diffraction and spectroscopy combined with density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations. Notably, in addition to the dissolution of Cr in the molten salt to form porous structures, a δ-A15 Cr phase was found to gradually form as a result of the metal–salt interaction. This phase change of Cr is associated with a change in the coordination environment of Cr at the interface. DFT and AIMD simulations provide a basis for understanding the enhanced stability of δ-A15 Cr vs. bcc Cr, by revealing their competitive phase thermodynamics at elevated temperatures and probing the interfacial behavior of the molten salt at relevant facets. This study provides critical insights into the morphological and chemical evolution of metal–molten salt interfaces. Finally, the combination of multimodal synchrotron analysis and atomic simulation also offers an opportunity to explore a broader range of systems critical to energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗