Search NASA⌕ Search

SEARCH · Search NASA

Results for “edge instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

An overview of 3D field optimization for control of transport and edge instabilities on KSTAR

An international team from several laboratories and universities has made key advances over the last few years in the control of plasma transport and edge instabilities with applied 3D fields in the KSTAR tokamak to optimize long pulse operation scenarios. This overview begins with the optimization of both core and edge resonant magnetic perturbations (RMP) to improve fast ion confinement to avoid excessive limiter heat loads due to fast ion losses and successful modeling of the experimental results. Integrated and advanced plasma control techniques with machine learning (ML) and adaptive control were then used to optimize the 3D field spectrum in real-time to control edge localized modes (ELMs) while avoiding core locked modes that could disrupt the plasma. Accelerating the offline model of 3D fields with a surrogate ML model can optimize ELM suppression in the edge while limiting the impact of the applied RMP fields deeper in the plasma core in real-time. In addition, the impact of the 3D fields on the divertor heat load has been modeled and compared with experimental measurements. An analysis of a multi-machine database including KSTAR has been performed to better understand the metrics for the observed RMP thresholds for ELM suppression and the resulting plasma performance. Predictive modeling of the operational space for ELM suppression and density pumpout due to RMP has shown the importance of magnetic islands in the plasma edge and their impact on plasma turbulence. This research has culminated in the development of successful long pulse operational scenarios on KSTAR while attempting to overcome challenges of the new tungsten divertor.

3D fields↗
DOE OSTI2025

First observations of edge instabilities in strongly shaped negative triangularity plasmas on DIII-D

Throughout the 2023 DIII-D negative triangularity (NT) campaign, unexpected magnetic fluctuations indicative of an edge localized instability were observed in the majority of strongly shaped (–0.55 ≤ δ ≤ –0.45) discharges. Moreover, these same fluctuations were found to be absent in weaker NT plasma shapes. Based on a database study, three separate mode behaviors are observed based primarily on the edge safety factor and normalized plasma beta β N . The main regime is the bursty state, in which short (~5 ms) magnetic bursts occur every 5–10 ms. Each burst drives a small reduction in the edge electron temperature (T e ) as measured by electron cyclotron emissions (ECE), which then rapidly recovers between the bursts. The quiescent regime appears to have governing mechanics similar to the bursty regime, but with multiple unique mode signatures observed in the magnetics. These additional modes greatly reduce the bursty nature of the plasma. Finally, a saturated state is observed in a number of discharges, particularly at early time slices. The saturated regime is often short-lived (maximum 500 ms), but can have a large impact on the dynamics of the plasma edge region, causing significant drops in electron temperature as observed in the ECE diagnostic. 2D ECE imaging (ECE-I) is utilized, showing large kink-like perturbations localized near the last closed flux surface that extend into the SOL indicative of an external kink/peeling behavior. Additionally, evidence of phase mixing and observed tearing-parity perturbations localized near the edge rational surfaces is observed in the quiescent regime plasmas. As a result, the various modes do not appear to have a large impact on global confinement but may play a role in regulating the transport of the NT edge and the observed edge gradients.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Control of neutral fueling and helium exhaust to NSTX-U plasmas by means of three-dimensional magnetic control fields

Resonant magnetic perturbations are used to stabilize plasma edge instabilities, so-called edge localized modes (ELMs), in high-performance (H-mode) plasmas explored for fusion energy. These ELMs cause repetitive outburst of confined energy and particles and cause cyclic loading of plasma facing components (PFCs). This endangers the integrity of the PFCs and hence limits the lifetime and hence commercial viability of fusion. It was shown that these ELMs can be stabilized by application of small amplitude resonant magnetic perturbation (RMP) fields. This removes the ELMs as edge instabilities but also induces three-dimensional (3D) effects to the plasma boundary, which was formerly toroidally axisymmetric. The impact of this 3D perturbation on the plasma boundary solution needs to be understood to extrapolate the effects to ITER and towards a fusion reactor, if ELM control by RMP fields would be utilized.

3D Boundary Plasmas↗
DOE OSTI2022

Plasma Wall Interaction with 3-D Plasma Boundaries

The interaction of the edge plasma and the material surfaces is one of the most critical challenges on the path to harness fusion power as new, fundamental energy source. This challenge typically combines the thrust to reach high density, low temperature (detached) plasmas in front of the divertor target plates as well as understanding the plasma material interaction (PMI) in particular in this regime. The combination of both research thrusts represents an extraordinarily challenging subject encompassing spatial scales spanning nanometers to meters in all states of matter and across a broad energy range. Modeling capabilities, which help to interpret data from nowadays experiments and enable extrapolation to future devices are urgently required. This is in particular true for toroidal magnetic confinement devices with three-dimensional (3D) plasma boundaries. Such plasma boundary geometries occur in tokamaks, when small amplitude magnetic perturbations are used to stabilize the unruly edge plasma or in stellarators, that are inherently 3D plasma confinement devices. In this project, the impact of 3D plasma boundaries on the plasma material interaction (PMI) was assessed. This work focused on plasma boundary conditions, in which high-density conditions at the material surfaces yield mitigation of the otherwise immense heat and particle loads that these materials would see. These so-called high recycling and eventually detached plasma regimes are of great interest for future reactor operation. In the project, key features that are unique to 3D boundaries were explored in comparison to canonically assumed axisymmetric plasma edge situations in tokamaks. In particular, the relevance of the 3D boundary situation in the extrapolation to the plasma boundary solution at ITER, the next step fusion energy experiment under construction as a multi-national, world-wide large-science experiment in southern France, has been explored. The EMC3-EIRENE plasma edge fluid and kinetic neutral transport code has been advanced to cope with the challenging and unprecedented conditions in the ITER boundary plasma including 3D fields that are planned to be used to suppress harmful edge instabilities, the so-called edge localized modes. This is a vital integration challenge for ITER and the results from this grant have provide a leading capability for this assessment. It was shown that the detachment process in a 3D edge solution for ITER follows the recycling regimes that are known from axisymmetric solutions, but that multiple plasma exhaust channels connected to the material surfaces are established which feature individual recycling characteristics. Because these channels touch the material surfaces in the divertor in a 3D geometry, the compatibility with the plasma material interaction (PMI), including erosion and impurity generation has been found to be an important part of the integration challenge. To address this, the fully 3D plasma material interaction code ERO2 has been adapted to these ITER specific geometries and a homogeneous mixing model was implemented, that allows to consider the mixing of Be and Was used at ITER in the PMI modeling. This model enhancement has been used to study non-local migration of Be in the JET ITER like wall configuration and it has been shown that with this model such complex migration processes in ITER relevant plasma shapes and with ITER relevant plasma boundary conditions can be addressed. The combined modeling approach using EMC3-EIRENE as a plasma boundary transport code and the ERO2 specialized PMI model will be an asset for the continued preparations of ITER operation as well as for Fusion Pilot Plant efforts that have emerged in the U.S. during the evolution of this grant. The predictive capability of this numerical tool has been validated at the DIII-D US national fusion facility. Here, dedicated plasma edge diagnostics were implemented to measure the impurity household around a 3D edge plasma during ELM suppression by 3D fields. Dedicated experiments with local material probes using these diagnostics and the state-of-the-art suite of boundary measurements at DIII-D have shown that the 3D perturbation of the plasma edge that is excreted by such 3D control fields yield a perturbation of the plasma boundary flux structure and hence also of the resulting PMI. The 3D boundary plasma is composed out of helical magnetic flux channels that intersect the divertor targets at an angle relative to the main guiding field, i.e., the toroidal magnetic field component of the tokamak. A similar effect has been measured as well on limiter surfaces during the startup campaign at the new stellarator experiment Wendelstein 7-X. These experiments ad initial analysis with the ERO plasma material interaction model, suggested that the place of erosion for a given particle from the surface and its re-deposition can be different in such 3D field geometries yielding potentially a significant level of net-erosion. This is not the case for axisymmetric solutions, where it was shown in the past that the eroded particles are effectively re-deposited into gaps produced by erosion at the same position and hence the net-erosion levels are small. For ITER, the quest to suppress the ELMs and at the same time maintain the integrity of the divertor is an issue, which these fundamental findings will help to resolve. The coupling of this work to the extrapolation in the ITER program has been addressed by both the PI and the lead numerical scientist being ITER Science Fellows in the duration of the contract and forward. A second focus in the exploration of 3D boundary effects on tokamaks and stellarators has been set on the measurement of helium exhaust features with such 3D fields. This is important because He represents the ash of the fusion process and needs to be exhausted. It was shown that 3D field application compatible with suppression of ELMs yields an increase of the helium exhaust performance. The ratio of the effective helium confinement time over the energy confinement time was reduced by almost 50% which demonstrated that the impact of helium accumulation in the plasma core with respect to the confinement of energy to sustain the fusion reaction is significantly improved with such 3D control fields. It was shown that this is the case for tokamaks as well as stellarators. At the Large helical Device in Japan, a similar enhancement of the helium exhaust features when small amplitude additional 3D fields were applied was measured. This is an important additional function of 3D field application and its impact on ITER is presently being studied in combination with investigations of helium exhaust in 3D field geometries of stellarator devices.

3D plasma edge transport↗
DOE OSTI2020

Enhanced pedestal H-mode at low edge ion collisionality on NSTX

The Enhanced Pedestal (EP) H-mode regime is an attractive wide-pedestal high-βp scenario for the National Spherical Torus Experiment Upgrade (NSTX-U) and next-step devices as it achieves enhanced energy confinement (H98y,2 > 1.5), large normalized pressure (βN > 5), and significant bootstrap fraction (fBS > 0.6) at Ip/BT = 2 MA/T. This regime is realized when the edge ion collisionality becomes sufficiently small that a positive feedback interaction occurs between a reduction in the ion neoclassical energy transport and an increase in the particle transport from pressure-driven edge instabilities. The EP H-mode was most often observed as a transition following a large edge-localized mode in conditions with low edge neutral recycling. It is hypothesized that the onset of pressure-driven instabilities prior to the full recovery of the neutral density leads to a temporary period with an elevated ion temperature gradient that triggers the transition to EP H-mode. Linear CGYRO and M3D-C1 calculations are compared to beam emission spectroscopy and magnetic spectroscopy in order to describe the evolution of the edge particle transport mechanisms during the ELM recovery and the saturated EP H-mode state. The observations are consistent with the hypothesis that the onset of pressure-driven edge instabilities, such as the kinetic ballooning mode and kink-peeling mode, can be responsible for the increased particle transport in EP H-mode.

Battaglia, D. J. (ORCID:0000000188979740)↗
DOE OSTI2020

Enhanced Pedestal H-mode at low edge ion collisionality on NSTX

The Enhanced Pedestal (EP) H-mode regime is an attractive wide-pedestal ELM-free high-betap scenario for NSTX-U and next-step devices as it achieves enhanced energy confinement (H98y,2 > 1.5), large normalized pressure (betaN > 5) and significant bootstrap fraction (f_BS > 0.6) at I_p/B_T = 2 MA/T. This regime is realized when the edge ion collisionality becomes sufficiently small that a positive feedback interaction occurs between a reduction in the ion neoclassical energy transport and an increase in the particle transport from pressure-driven edge instabilities. EP H-mode was most often observed as a transition following a large ELM in conditions with low edge neutral recycling. It is hypothesized that the onset of pressure-driven instabilities prior to the full recovery of the neutral density leads to a temporary period with elevated ion temperature gradient that triggers the transition to EP H-mode. Linear CGYRO and M3D-C1 calculations are compared to beam emission spectroscopy (BES) and magnetic spectroscopy in order to describe the evolution of the edge particle transport mechanisms during the ELM recovery and the saturated EP H-mode state. The observations are consistent with the hypothesis that the onset of pressure-driven edge instabilities, such as the KBM and kink-peeling, can be responsible for the increased particle transport in EP H-mode.

edge and boundary physics↗
DOE OSTI2022

A sustained high-temperature fusion plasma regime facilitated by fast ions

Nuclear fusion is one of the most attractive alternatives to carbon-dependent energy sources. Harnessing energy from nuclear fusion in a large reactor scale, however, still presents many scientific challenges despite the many years of research and steady advances in magnetic confinement approaches. State-of-the-art magnetic fusion devices cannot yet achieve a sustainable fusion performance, which requires a high temperature above 100 million kelvin and sufficient control of instabilities to ensure steady-state operation on the order of tens of seconds. Here, in this study, we report experiments at the Korea Superconducting Tokamak Advanced Research device producing a plasma fusion regime that satisfies most of the above requirements: thanks to abundant fast ions stabilizing the core plasma turbulence, we generate plasmas at a temperature of 100 million kelvin lasting up to 20 seconds without plasma edge instabilities or impurity accumulation. A low plasma density combined with a moderate input power for operation is key to establishing this regime by preserving a high fraction of fast ions. This regime is rarely subject to disruption and can be sustained reliably even without a sophisticated control, and thus represents a promising path towards commercial fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Nonlinear and 3D plasmas. Final report

The project objectives are to characterize the nonlinear properties of edge instabilities in fusion plasmas from the standpoint of MHD and extended MHD models of plasmas and to develop, as much as possible, simplified models that may be useful for prediction and control.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Exploring superconductivity at the edge of magnetic or structural instabilities

Modern research of condensed matters devotes in understanding how properties of complex solids are determined by their structural and electronic degrees of freedom. In the last decade, the discovery of Fe-based high-temperature superconductors as well as the discovery of protected surface state in bulk materials arising from the non-trivial topological electronic structures have brought revolutionary breakthroughs, advancing our understanding of the interplay of structure, band topology, spin and charge degrees of freedom to a new level. Despite the exciting progresses, significant materials challenges remain. To address such challenges, our research funded by this award focuses on the design, synthesis and property characterization of two types of quantum materials. One is quasi-two-dimensional materials with structural/magnetic instability, the other is topological materials, especially the “ideal” ones where only minimum non-trivial bands exist at the Fermi level. The objective of our research is to design quantum materials that lie at the edge of structural/magnetic instabilities as well as the ones with non-trivial band topology, aiming at the discovery of quantum materials with emergent phenomena and the in-depth understanding of the entanglement of band topology and various degrees of freedoms through thermodynamic, transport, X-ray, and neutron measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Grassy ELM regime at low pedestal collisionality in high-power tokamak plasma

Spontaneous mitigation of giant ELMs and appearance of grassy ELMs have been observed repeatedly at low pedestal collisionality (${\nu }_{\mathrm{e},\mathrm{p}\mathrm{e}\mathrm{d}}^{{\ast}}\sim 0.15$) in the high-power (P inj > 13 MW) hybrid scenario in DIII-D. Higher β p and higher q 95 appear to be beneficial to achieving the grassy ELM regime. The grassy ELM H-mode plasma shows high energy confinement performance (H 98y2 up to over 1.5) under the conditions of high neutral beam torque and high core rotation. The pedestal width appears to exceed the EPED1.0 model prediction by more than 50%. Pedestal stability analysis performed with the ELITE code indicates that the stability against low-n kink/peeling modes is improved with increased auxiliary heating power and the operational point in the grassy ELM regime is located near the ballooning boundary. The pedestal stability characteristics during the grassy ELM crashes have been investigated in comparison with the giant ELM crashes based on plasma profiles experimentally measured with high resolution and accuracy. It has been found that the underlying mechanism for the observed small-amplitude ELM crashes is mainly the expansion of the ballooning stability boundary induced by an initial radially localized collapse in the pedestal, which helps to stop the growth of instabilities and further collapse of the pedestal. The effect of electron density pedestal on mitigating edge localized instabilities has been analyzed by numerical simulation, suggesting that the electron density pedestal characterized by high n e,sep /n e,ped and low density gradient helps to stabilize peeling-ballooning modes because of a low pressure pedestal gradient and to lower the ballooning boundary mainly because of a low ion diamagnetic frequency in the pedestal region, thus triggering ballooning instabilities and producing the intrinsic grassy ELMs. Numerical simulation of the Chinese fusion engineering test reactor (CFETR) with the SOLPS code indicates that the separatrix density might be insensitive to the electron diffusivity in the pedestal region and increase with the power flowing from the core region to the edge region. Furthermore, pedestal stability analysis suggests that the flat density pedestal with high separatrix density obtained in the high-power plasma in CFETR would make the operational point close to the ballooning boundary, which is considered to help destabilize ballooning instabilities and facilitate the access to the grassy ELM regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Partnership Center for High-fidelity Boundary Plasma Simulation

The University of Colorado Boulder contributed to the DOE Partnership Center for High‑fidelity Boundary Plasma Simulation (award DE‑SC0018271) by advancing gyrokinetic modeling of core–edge plasma interactions in tokamaks. Using the GEM and XGC codes, the project investigated turbulence spreading from the plasma edge to the core, finding that while edge‑driven trapped electron mode turbulence enhances core ion heat flux in DIII‑D L‑mode plasmas, it does not fully explain experimentally observed transport shortfalls, indicating a need for flux‑driven models. The team also demonstrated that edge micro‑instabilities are highly sensitive to small variations in magnetic equilibrium, particularly near the pedestal and edge, highlighting the importance of accurately characterizing equilibrium uncertainties. Significant progress was made in spatially coupling the core GEM and edge XGC simulations, with successful validation against standalone XGC results in realistic tokamak geometries, laying the groundwork for future extensions to kinetic electrons and electromagnetic effects.

42 ENGINEERING↗
DOE OSTI2024

Characterizing the negative triangularity reactor core operating space with integrated modeling

Negative triangularity (NT) has received renewed interest as a fusion reactor regime due to its beneficial power-handling properties, including low scrape-off layer power and a larger divertor wetted area that facilitates simple divertor integration. NT experiments have also demonstrated core performance on par with positive triangularity (PT) high confinement mode (H-mode) without edge-localized modes (ELMs), encouraging further study of an NT reactor core. In this work, we use integrated modeling to scope the operating space around two NT reactor strategies. The first is the high-field, compact fusion pilot plant concept Modular, Adjustable, NT ARC (MANTA) and the second is a low field, high aspect ratio concept based on work by Medvedev et al. By integrating equilibrium, core transport, and edge ballooning instability models, we establish a range of operating points with less than 50 MW scrape-off layer power and fusion power comparable to PT H-mode reactor concepts. Heating and seeded impurities are leveraged to accomplish the same fusion performance and scrape-off layer exhaust power for various pressure edge boundary conditions. Scans over these pressure edge conditions accommodate any current uncertainty of the properties of the NT edge and show that the performance of an NT reactor will be extremely dependent on the edge pressure. The high-field case is found to enable lower scrape-off layer power because it is capable of reaching high fusion powers at a relatively compact size, which allows increased separatrix density without exceeding the Greenwald density limit. Adjustments in NT shaping exhibit small changes in fusion power, with an increase in fusion power density seen at weaker NT. Infinite-n ballooning instability models indicate that an NT reactor core can reach fusion powers comparable to leading PT H-mode reactor concepts while remaining ballooning-stable. Seeded krypton is leveraged to further lower scrape-off layer power since NT does not have a requirement to remain in H-mode while still maintaining high confinement. We contextualize the NT reactor operating space by comparing to popular PT H-mode reactor concepts, and find that NT exhibits competitive ELM-free performance with these concepts for a variety of edge conditions while maintaining relatively low scrape-off layer power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Extended-MHD simulations of disruption mitigation via massive gas injection in SPARC

Recent developments to the M3D-C1 code enable higher fidelity modeling of disruptions, and can be applied in the design verification of reactor-scale tokamaks. Among these new capabilities is a method to mesh conducting vessel structures such as coils and passive plates, packing of the toroidal mesh around gas injectors, as well as anisotropic resistivity inside the vessel structures. We present extended-magnetohydrodynamic (MHD) simulations of disruption mitigation via massive gas injection (MGI) in SPARC. The goal of this study is to inform the disruption mitigation layout of SPARC and aid in the design of an effective gas injector configuration. Fully three-dimensional simulations with M3D-C1 are carried out for various injector configurations with the primary goal of determining the effect of different MGI parameters on heat loads and vessel forces. The simulations include a model for impurity ionization, recombination, advection and radiation, as well as spatially resolved conducting structures around the plasma. A localized mixture of deuterium and neon with a small toroidal and poloidal width is injected in up to six locations. We demonstrate that M3D-C1 can model a rapid shutdown via MGI using narrow and more realistic gas plumes than in previous simulations. As a result of the q = 1 surface in the SPARC baseline case a sawtooth is observed early in the simulations. Despite the sawtooth and the onset of edge MHD instabilities, the impurity distribution remains localized around the injector locations, but enables a radiative shutdown of the plasma. We find that using the maximum of six gas injectors results in a lower peaking factor and leads to a more even distribution of radiation toroidally than using two injectors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

The onset distribution of rotating m , n = 2 , 1 tearing modes and its consequences on the stability of high-confinement-mode plasmas in DIII-D

Abstract Analysis of a multi-scenario database of over 13 000 DIII-D H-mode discharges shows that the m , n = 2 , 1 magnetic islands are dominantly pressure gradient driven, stochastically triggered non-linear instabilities at all edge safety factor ( q 95 ) values. The instability onset time closely follows the exponential distribution in intermediate and high q 95 scenarios and is characterized by near constant onset rate ( λ ), in accordance with Poisson-point processes. This implies that the plasmas are operated in marginally stable conditions, characterized by a small threshold for instability growth and variations in the trigger amplitude and/or the stabilizing mechanisms with temporally uniform random distribution in this database. While the majority of the tearing modes occur in the first current-profile relaxation time of the β N flattop, constant λ throughout the β N flattop shows that the tearing onset is insensitive to the evolution of the equilibrium current profile. In low q 95 scenarios, where a large fraction of the plasmas are operated at low torque, λ increases over the course of the β N flattop, showing that these plasmas evolve toward more unstable conditions. The onset rate rapidly increases with β N , while it does not show a clear dependence on the current gradient at the mode rational surface. Overall, these observations support that the majority of the analyzed 2,1 tearing modes are non-linear, neoclassically driven instabilities and classical stability does not play a dominant role in their onset.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Toroidal phase of post-disruption runaway electron loss to wall in presence of applied 3-D fields in DIII-D

The toroidal distribution of runaway electrons (REs) striking the centre post in DIII-D post-disruption RE final loss events is simulated utilizing the MARS-F code combined with the REORBIT module, by tracing the guiding-centre drift orbits of test REs in the presence of external (applied) plus internal (intrinsic instability) 3-D fields. To better recover the experimental results, three different equilibria with different safety factor profiles are adopted. Dominant resistive magnetohydrodynamic instabilities are found to be m/n=2/1, 3/2 and 1/1 modes (where m and n are the poloidal and toroidal mode numbers). Externally applied n=1 resonant magnetic perturbations (RMPs), with both even and odd parity configuration, are considered in each equilibrium. Locking of MHD instability to the applied RMPs is simulated by minimizing the total perturbed magnetic energy in the plasma. Here, the simulated toroidal locations, where most REs strike in the presence of an edge m/n= 2/1 instability and the n=1 RMPs in even parity, are found to agree well with experiments. Modeling also captures the measured n = 2 RE loss pattern on the wall for experiments where an edge m/n=3/2 instability is dominant instead of the m/n=2/1 mode. The key overall findings include (a) the measured global RE toroidal impact pattern in experiments can be explained by a locked resistive kink instability, (b) the toroidal phase of the locked mode is well predicted by minimizing the total perturbed magnetic energy, and (c) this edge locked mode determines the toroidal phase of the peak RE wall impact.

Bai, Xue [University of California San Diego, La J↗
DOE OSTI2025

Multi-scale Interaction Mechanism for Edge-Localized-Mode Suppression in the Tokamak Edge

A central challenge in fusion energy is reconciling the high-confinement mode required for reactor performance with the intense intermittent relaxation events it produces, known as edge-localized modes. These instabilities arise in the steep pressure pedestal at the plasma edge when magnetohydrodynamic thresholds are crossed, inflicting damaging heat loads on reactor components. Here, we show that multiscale interactions between microscopic turbulence and macroscopic magnetohydrodynamic modes provide encouraging prospects for self-organized edge-localized modes regulation. Using direct quantitative measurements of multiscale modes, eddy dynamics, and turbulent flux, we show that small-scale electron drift wave turbulence actively scatters the large-scale peeling-ballooning modes. This scattering decorrelates the pressure and velocity fields of the instability, so arresting its growth. Our modeling and theoretical analysis confirm this suppression mechanism is effective even when conventional linear stability thresholds are exceeded. This work establishes a nonlinear principle for edge-localized modes stability, revealing how ambient micro-turbulence can be leveraged to maintain a macro-stable, high-performance pedestal for future fusion reactors.

experimental nuclear physics↗
DOE OSTI2021

Sustained edge-localized-modes suppression and radiative divertor with an impurity-driven instability in tokamak plasmas

We report simultaneous control of the large edge localized modes (ELMs) and divertor heat fluxes in a metal wall environment is a critical issue for steady-state operation of a tokamak fusion reactors. Here we report a sustained ELM suppression scenario achieved in the EAST tokamak compatible with radiative divertor using different seeding impurity species over a wide range of conditions. A low-n mode appears, as manifested by the oscillations of a radiation front near the X-point. This mode appears to drive strong particle transport and tungsten exhaust, which is essential to the maintenance of the ELM-stable state. We have developed a model to explain the mode excitation, by coupling the impurity radiative condensation instability to drift waves, which could explain some characteristics of the low-n mode well. The low-n mode may offer a new ELM-stable scenario compatible with radiative divertor for future fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗