Search NASA⌕ Search

SEARCH · Search NASA

Results for “edge plasma”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Pulsed Electromagnetic Acceleration of Plasmas

A major shift in paradigm in driving pulsed plasma thruster is necessary if the original goal of accelerating a plasma sheet efficiently to high velocities as a plasma "slug" is to be realized. Firstly, the plasma interior needs to be highly collisional so that it can be dammed by the plasma edge layer not (upstream) adjacent to the driving 'vacuum' magnetic field. Secondly, the plasma edge layer needs to be strongly magnetized so that its Hall parameter is of the order of unity in this region to ensure excellent coupling of the Lorentz force to the plasma. Thirdly, to prevent and/or suppress the occurrence of secondary arcs or restrike behind the plasma, the region behind the plasma needs to be collisionless and extremely magnetized with sufficiently large Hall parameter. This places a vacuum requirement on the bore conditions prior to the shot. These requirements are quantified in the paper and lead to the introduction of three new design parameters corresponding to these three plasma requirements. The first parameter, labeled in the paper as gamma (sub 1), pertains to the permissible ratio of the diffusive excursion of the plasma during the course of the acceleration to the plasma longitudinal dimension. The second parameter is the required Hall parameter of the edge plasma region, and the third parameter the required Hall parameter of the region behind the plasma. Experimental research is required to quantify the values of these design parameters. Based upon fundamental theory of the transport processes in plasma, some theoretical guidance on the choice of these parameters are provided to help designing the necessary experiments to acquire these data.

Thio, Y. C. Francis↗
NASA NTRS1981

Energetic ion beams at the edge of the plasma sheet - ISEE 1 observations plus a simple explanatory model

It has been found that energetic ions with energies in the range from 10 keV to 2 MeV are an important part of the geomagnetic tail particle population. A description is presented of energetic ion, three-dimensional distribution observations from ISEE 1 during 0400-2000 UT, May 3, 1978, a time when several encounters with the geomagnetic tail plasma sheet occurred. Pronounced energetic ion streaming is observed at each entry to and exit from the plasma sheet. Azimuthal gradients observed during these times indicate that this streaming occurs within two gyroradii of the plasma sheet edge. Streaming characteristics show both narrow and broad angular flows at arbitrary angles to B. These flows are observed simultaneously and individually. The time, energy, and pitch angle evolution of the ion fluxes show that ISEE 1 is encountering a dynamic and not a static equilibrium situation at the edge of the plasma sheet.

Williams, D. J.↗
NASA NTRS1979

Process Development for Automated Solar Cell and Module Production. Task 4: Automated Array Assembly

A baseline sequence for the manufacture of solar cell modules was specified. Starting with silicon wafers, the process goes through damage etching, texture etching, junction formation, plasma edge etch, aluminum back surface field formation, and screen printed metallization to produce finished solar cells. The cells were then series connected on a ribbon and bonded into a finished glass tedlar module. A number of steps required additional developmental effort to verify technical and economic feasibility. These steps include texture etching, plasma edge etch, aluminum back surface field formation, array layup and interconnect, and module edge sealing and framing.

Source record↗
NASA NTRS1985

A ground-based experimental test program to duplicate and study the spacecraft glow phenomenon

The use of a plasma device, the Advanced Concepts Torus-I, for producing atoms and molecules to study spacecraft glow mechanisms is discussed. A biased metal plate, located in the plasma edge, is used to accelerate and neutralize plasma ions, thus generating a neutral beam with a flux approx. 5 x 10 to the 14th power/sq cm/sec at the end of a drift tube. Our initial experiments are to produce a 10 eV molecular and atomic nitrogen beam directed onto material targets. Photon emission in the spectral range 2000 to 9000 A from excited species formed on the target surface will be investigated.

Langer, W. D.↗
NASA NTRS1990

Can a Penning ionization discharge simulate the tokamak scrape-off plasma conditions?

The tokamak scrape-off (the region between the vacuum vessel wall and the magnetically confined fusion plasma edge), represents a source/sink for the hot fusion plasma. The electron densities and temperatures are in the ranges 10 to the 11th - 10 to the 13th/cu cm and 1-40 eV, respectively (depending on the size, magnetic field intensity and configuration, plasma current, etc). In the work reported, the electron temperature and density have been estimated in a Penning ionization discharge by comparing its spectroscopic emission in the VUV with that predicted by a collisional radiative model. An attempt to directly compare this emission with that of the tokamak edge is briefly described.

Finkenthal, M.↗
NASA NTRS2004

Magnetic-Nozzle Studies for Fusion Propulsion Applications: Gigawatt Plasma Source Operation and Magnetic Nozzle Analysis

This project has been a multiyear effort to assess the feasibility of a key process inherent to virtually all fusion propulsion concepts: the expansion of a fusion-grade plasma through a diverging magnetic field. Current fusion energy research touches on this process only indirectly through studies of plasma divertors designed to remove the fusion products from a reactor. This project was aimed at directly addressing propulsion system issues, without the expense of constructing a fusion reactor. Instead, the program designed, constructed, and operated a facility suitable for simulating fusion reactor grade edge plasmas, and to examine their expansion in an expanding magnetic nozzle. The approach was to create and accelerate a dense (up to l0(exp 20)/m) plasma, stagnate it in a converging magnetic field to convert kinetic energy to thermal energy, and examine the subsequent expansion of the hot (100's eV) plasma in a subsequent magnetic nozzle. Throughout the project, there has been a parallel effort between theoretical and numerical design and modelling of the experiment and the experiment itself. In particular, the MACH2 code was used to design and predict the performance of the magnetoplasmadynamic (MPD) plasma accelerator, and to design and predict the design and expected behavior for the magnetic field coils that could be added later. Progress to date includes the theoretical accelerator design and construction, development of the power and vacuum systems to accommodate the powers and mass flow rates of interest to out research, operation of the accelerator and comparison to theoretical predictions, and computational analysis of future magnetic field coils and the expected performance of an integrated source-nozzle experiment.

Gilland, James H.↗
NASA NTRS1983

The inner edge of the plasma sheet and the diffuse aurora

Three dimensional measurements from the ISEE-1 low energy electron spectrometer are used to map the location of the inner edge of the plasma sheet and study the anisotropies in the electron distribution function associated with this boundary. Lower energy plasma sheet electrons have inner edges closer to the Earth than higher energies with the separations at different energies being larger near dawn and after dusk than at midnight. Lowest energy inner edges are frequently located adjacent to the plasmapause in the dawn hemisphere but are often separated from it in the dusk hemisphere by a gap of at least several Re. The energy dispersion is minimal in the afternoon quadrant where the inner edge is near the magnetopause and frequently oscillating on a time scale of minutes. The location of the inner edge is probably determined primarily by the motion of electrons in the existing electric and magnetic fields rather than by strong diffusion as has sometimes been supposed.

Fairfield, D. H.↗
NASA NTRS1984

The inner edge of the plasma sheet and the diffuse aurora

Three dimensional measurements from the ISEE-1 low energy electron spectrometer are used to map the location of the inner edge of the plasma sheet and study the anisotropies in the electron distribution function associated with this boundary. Lower energy plasma sheet electrons have inner edges closer to the earth than higher energies with the separations at different energies being larger near dawn and after dusk than at midnight. Lowest energy inner edges are frequently located adjacent to the plasmapause in the dawn hemisphere but are often separated from it in the dusk hemisphere by a gap of at least several Re. The energy dispersion is minimal in the afternoon quadrant where the inner edge is near the magnetopause and frequently oscillating on a time scale of minutes. The location of the inner edge is probably determined primarily by the motion of electrons in the existing electric and magnetic fields rather than by strong diffusion as has sometimes been supposed. Previously announced in STAR as N83-32595

Fairfield, D. H.↗
NASA NTRS1988

Radiative instabilities in sheared magnetic field

The structure and growth rate of the radiative instability in a sheared magnetic field B have been calculated analytically using the Braginskii fluid equations. In a shear layer, temperature and density perturbations are linked by the propagation of sound waves parallel to the local magnetic field. As a consequence, density clumping or condensation plays an important role in driving the instability. Parallel thermal conduction localizes the mode to a narrow layer where K(parallel) is small and stabilizes short wavelengths k larger-than(c) where k(c) depends on the local radiation and conduction rates. Thermal coupling to ions also limits the width of the unstable spectrum. It is shown that a broad spectrum of modes is typically unstable in tokamak edge plasmas and it is argued that this instability is sufficiently robust to drive the large-amplitude density fluctuations often measured there.

Drake, J. F.↗
NASA NTRS1992

Performance of a plasma fluid code on the Intel parallel computers

One approach to improving the real-time efficiency of plasma turbulence calculations is to use a parallel algorithm. A parallel algorithm for plasma turbulence calculations was tested on the Intel iPSC/860 hypercube and the Touchtone Delta machine. Using the 128 processors of the Intel iPSC/860 hypercube, a factor of 5 improvement over a single-processor CRAY-2 is obtained. For the Touchtone Delta machine, the corresponding improvement factor is 16. For plasma edge turbulence calculations, an extrapolation of the present results to the Intel (sigma) machine gives an improvement factor close to 64 over the single-processor CRAY-2.

Lynch, V. E.↗
NASA NTRS2011

International Space Station (ISS) Risk Reduction Activities

As the assembly of the ISS nears completion, it is worthwhile to step back and review some of the actions pursued by the Program in recent years to reduce risk and enhance the safety and health of ISS crewmembers, visitors, and space flight participants. While the ISS requirements and initial design were intended to provide the best practicable levels of safety, it is always possible to reduce risk -- given the determination and commitment to do so. The following is a summary of some of the steps taken by the ISS Program Manager, by our International Partners, by hardware and software designers, by operational specialists, and by safety personnel to continuously enhance the safety of the ISS. While decades of work went into developing the ISS requirements, there are many things in a Program like the ISS that can only be learned through actual operational experience. These risk reduction activities can be divided into roughly three categories: (1) Areas that were initially noncompliant which have subsequently been brought into compliance or near compliance (i.e., Micrometeoroid and Orbital Debris [MMOD] protection, acoustics) (2) Areas where initial design requirements were eventually considered inadequate and were subsequently augmented (i.e., Toxicity Level 4 materials, emergency hardware and procedures) (3) Areas where risks were initially underestimated, and have subsequently been addressed through additional mitigation (i.e., Extravehicular Activity [EVA] sharp edges, plasma shock hazards) Due to the hard work and cooperation of many parties working together across the span of nearly a decade, the ISS is now a safer and healthier environment for our crew, in many cases exceeding the risk reduction targets inherent in the intent of the original design. It will provide a safe and stable platform for utilization and discovery.

Fodroci, Michael↗
NASA NTRS2011

Long-Term International Space Station (ISS) Risk Reduction Activities

As the assembly of the ISS nears completion, it is worthwhile to step back and review some of the actions pursued by the Program in recent years to reduce risk and enhance the safety and health of ISS crewmembers, visitors, and space flight participants. While the initial ISS requirements and design were intended to provide the best practicable levels of safety, it is always possible to further reduce risk given the determination, commitment, and resources to do so. The following is a summary of some of the steps taken by the ISS Program Manager, by our International Partners, by hardware and software designers, by operational specialists, and by safety personnel to continuously enhance the safety of the ISS, and to reduce risk to all crewmembers. While years of work went into the development of ISS requirements, there are many things associated with risk reduction in a Program like the ISS that can only be learned through actual operational experience. These risk reduction activities can be divided into roughly three categories: Areas that were initially noncompliant which have subsequently been brought into compliance or near compliance (i.e., Micrometeoroid and Orbital Debris [MMOD] protection, acoustics) Areas where initial design requirements were eventually considered inadequate and were subsequently augmented (i.e., Toxicity hazard level-4 materials, emergency procedures, emergency equipment, control of drag-throughs) Areas where risks were initially underestimated, and have subsequently been addressed through additional mitigation (i.e., Extravehicular Activity [EVA] sharp edges, plasma shock hazards). Due to the hard work and cooperation of many parties working together across the span of more than a decade, the ISS is now a safer and healthier environment for our crew, in many cases exceeding the risk reduction targets inherent in the intent of the original design. It will provide a safe and stable platform for utilization and discovery for years to come.

Forroci, Michael P.↗
NASA NTRS1982

On the relationship of the plasmapause to the equatorward boundary of the auroral oval and to the inner edge of the plasma sheet

ISEE 1 observations of the plasmapause are compared with simultaneous observations of the electron plasma sheet and also the auroral oval observed in DMSP photographs. Only a limited amount of appropriate data was available for the comparisons: the plasmapause/plasma sheet inner edge comparisons were restricted to the early and late morning sectors, while there were two satisfactory comparisons of the plasmapause and the equatorward boundary of the auroral oval in the evening sector. However, these examples indicate that the plasmapause location often coincides to within a change in L of about 0.1-0.2 with both the plasma sheet inner boundary and the field line threading the equatorward boundary of the auroral oval. This co-location of the plasmapause and the plasma sheet inner edge may be due to shielding of the magnetospheric convection electric field by an Alfven layer located at the inner edge of the plasma sheet as discussed by Jaggi and Wolf (1973) and others.

Horwitz, J. L.↗
NASA NTRS1995

Average motion, structure and orientation of the distant magnetotail determined from remote sensing of the edge of the plasma sheet boundary layer with E greater than 35 keV ions

We study gradients of the energetic ion intesity observed at the edge of the plasma sheet boundary layer (PSBL) by the energetic ion anisotropy spectrometer (EPAS) on International Sun Earth Explorer 3 (ISEE 3). In particular, we have determined the velocity of the boundary relative to the spacecraft in the direction perpendicular to the tail axis and the angle which the boundary normal makes to the spacecraft spin axis for 1160 PSBL encounters at X(sub GSM) greater than -240 R(sub E). By asuming that, on average, the edge of the PSBL is parallel to the cross-tail current sheet, we are then able to determine a number of properties of the structure, orientation and motion of the deep geomagnetic tail. We conclude the following: (1) Most crossings of the edge of the PSBL are caused by transverse motuion of the entire tail induced by solar wind direction variations, although some are caused by reconfiguration of the tail due to geomagnetic activity. (2) The typical velocity of the PSBL (and hence of the tail) in the direction perpendicular to the tail axis is 50-85 km/s. (3) The average twist of the tail is near zero, with the edge of the PSBL (and by inference the cross-tail current sheet) lying parallel to the ecliptic plane (however, large twists are found in individual events and the distribution of twists is broad, with one standard deviation of approximately 50 deg. (4) The width of the distribution decreases with downtail distance. (5) The variation of the distributions with cross-tail position reveals that this decreas in width is most likely due to the edge of the PSBL being concave, or significantly flared at the tail flanks, in the near-Earth region. (6) During days on which the Interplanetary Magnetic Field (IMF) has 'away' sector structure, the north lobe of the trail is twisted on average towards dawn by 7.0 +/-2.4 deg. (7) During days on which the IMF has 'toward' sector structure, the north lobe is tilted towards duskby 3.8 +/- 2.3. (8) A subset of events for which IMP 8 solar wind data are available show that, for southward IMF BH(sub z) the tail has a mean twist of -12.3 +/- 5.0 deg for IMF B(sub Y) greater than 0 and 5.5 +/- 3.8 deg for IMF B(sub Y) less than 0 (positive twist angles correspond to a tilt of the northern lobe towards dusk). (9) For northward IMF B(sub z) the tail has a twist of -23.9 +/- 5.0 deg for IMF B(sub Y) greater than 0 and 13.4 +/- 6.0 deg for IMF B(sub y) less than 0. Hence the tail appears more twisted on average for the IMF B(sub Z) northward case. (10) The distribution of tail twist is wider for lower levels of geomagnetic activity, indicating that the tail is able to twist more at lower levels of activity. (11) The data set reveals no evident effect of the earth's dipole wobble; tail orientation appears to be controlled by the solar wind and IMF, such that the GSE coordinate system may be appropriate for the study of field and plasma structures in the distant tail region.

Owen, C. J.↗
NASA NTRS1984

A second harmonic geomagnetic field line resonance at the inner edge of the plasma sheet - GEOS 1, ISEE 1, and ISEE 2 observations

A description is provided of observations made by GEOS 1, ISEE 1, and ISEE 2 of a hydromagnetic wave with a period approximately 90 s observed near 0200 LT between L = 9 and L = 6, close to the measured inner boundary of the plasma sheet. The wave magnetic oscillations perpendicular to and along the ambient field had similar amplitudes. Using primarily the transverse magnetic components, it is shown that the wave is a second harmonic resonance of the local geomagnetic field lines. ISEE 1 and 2 observed the opposite sense of polarization for about 30 min, although the spacecraft were separated by only 9 min in their orbit; this remarkable feature cannot be explained by either a stationary spatial boundary or a simple temporal boundary but could result from a rapid movement of the resonant region. It is argued that the most likely energy source is bounce resonance with medium energy (approximately 5 keV) ions. Calculations of the wave Poynting vector at ISEE 1 support this conclusion.

Hughes, W. J.↗