Search NASA⌕ Search

SEARCH · Search NASA

Results for “elastic analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Establishing temperature upper limits for the ASME Section III, Division 5 design by elastic analysis methods

ection III, Division 5 of the ASME Boiler and Pressure Vessel Code provides two broad paths for the design of high temperature, safety-critical nuclear components: design by elastic analysis and design by inelastic analysis. The design by elastic analysis approach, as the name suggests, uses a linear elastic stress analysis of the component and applies design rules designed to bound response of the actual structure, which will undergo both creep and plasticity. Currently, the Code allows the use of the elastic approach for all operating temperatures up to the maximum use temperatures in the Code. The bounds used in the elastic approach assume an uncoupled material response combining rate dependent creep with rate independent plasticity. However, at elevated temperatures creep and plasticity are coupled, rate dependent mechanisms and so the elastic analysis rules may become non-conservative. We present several examples of potential non-conservatism in the elastic analysis rules at high operating temperatures. Then we describe a systematic method for determining a temperature cutoff describing the transition from non-unified, rate independent plasticity material response to a rate dependent, unified plastic response. Logically, this transition temperature sets the upper bound for the allowable, conservative use of the design by elastic analysis approach and so we propose these temperatures, determined for all the Section III, Division 5 Class A materials, as Code limits for the applicability of the elastic approach.

Messner, M. C.↗

The Elastic Analysis Facility's (EAF's) Contribution to the Future of Analysis at Multi-Experiment Institutions and Future Colliders

The Elastic Analysis Facility (EAF) hosted at Fermi National Accelerator Laboratory (Fermilab) is a platform being developed with the goal of providing a fast and efficient facility for physics analysis. As high-energy physics moves towards collecting larger datasets, such as those from the High-Luminosity LHC, the EAF strives to provide a powerful and adaptable framework for future colliders and multi-experiment institutions. Currently, the EAF supports several experiments including CMS, NOvA, and DUNE as well as serving accelerator physicists and beam line operations through integrated software and secure connections to Fermilab's computing resources. In addition, the EAF was designed with a user-friendly interface, intended to be more intuitive for emerging generations of physicists, that is still accessible for established styles of analysis. The EAF can also achieve better analysis efficiency due to the modernization of software and tools that can better utilize Fermilab's computing power. Furthermore, its design incorporates industry standards whenever possible, enhancing its sustainability and making it a possible template for other national or international laboratories and research facilities. Overall, the EAF is a forward-looking solution that will meet the evolving needs of particle physics, ensuring readiness for future colliders and multi-experiment research institutions.

Chavez, Elise [Wisconsin U., Madison]↗

An Elastic Analysis of a Plated Bone to Determine Fracture Gap Motion

An elastic analysis to determine fracture gap motions occurring in the osteotomized and plated canine femur was performed using the finite element program NASTRAN. The femur was idealized as a hollow right cylinder, and transverse anisotropy was assumed for the elastic properties of the bone. A 3-D 360 degree model consisting of 224 isoparametric quadrilateral hexahedral and 11 beam elements was created. A range of plate stiffnesses was tested by varying the modulus of elasticity of the plate from 207 GPa to 1 GPA. Moments were applied in the plane of the plate, about the axis of the plate, and in the plane of the screws. Results showed that, for plates of typical geometry and elastic modulus under 10 GPa, the contribution to fracture gap motion occurring due to deformation in the bone was negligible compared to that contribution from deformation in the plate.

Cooke, F. W.↗

Elastic Analysis of Three-Dimensional Solids with Fiber Inclusions by Bem

A very efficient method of analysis for the elastic behavior of three-dimensional solids with a large number of embedded fiber inclusions has been developed. For specific applications to the analysis of cylindrical shaped fiber inclusions significant gain in efficiency can be achieved by defining these inclusions by a system of curvilinear line elements with a prescribed diameter and by assuming a variation in the traction and displacement field in the circumferential directions in terms of a trigonometric shape function together with a linear or quadratic variation along the longitudinal direction. The resulting integrals are then treated semi-analytically. A number of examples of the analysis which has been developed for composite elements are described.

Banerjee, P. K.↗

ISOFINEL: Isoparametric finite element code for elastic analysis of two-dimensional bodies

A formulation is presented for the development of a finite element program for the elastic analysis of two-dimensional bodies using the eight-node isoparametric quadrilateral. The program solves for both plane stress and plane strain problems. The finite element formulation based on the isoparametric displacement functions is presented. The program structure is given in the form of flow diagrams with descriptions of the numerical procedure used to obtain the element stiffness matrix, and the solution method employed to solve for nodal displacements. Three numerical examples (a plate under uniaxial tension, a plate under pure shear, and a beam under pure bending) are presented to illustrate the capability and limitations of the element implementation. The first problem is solved exactly by the element, as predicted by the form of its displacement functions. In the other two problems the accuracy of the solution is highly dependent upon the slenderness of the element, the number of elements in the map, and the numerical integration scheme used to build the element stiffness matrix.

Marino, C.↗

The elastic analysis of the part-circular surface flaw problem by the alternating method.

This paper summarizes and evaluates the work done on the elastic analysis of the surface flaw problem by the application of the alternating method. An attempt is made to describe the alternating method and to present the history of its application to the surface flaw problem and to related problems in fracture mechanics. Stress intensity factors obtained by this method are summarized and compared. Results are also compared to those obtained by investigators using other methods of analysis. An evaluation of the use of the alternating method is presented with the purpose of pointing out the advantages and disadvantages in the application of this technique to the surface flaw problem.

Smith, F. W.↗

Three-dimensional elastic analysis of a composite double cantilever beam specimen

Attention is given to the stresses and the strain energy release rate along the delamination front in the present three-dimensional elastic analysis of a 24-ply, cocured double-cantilever beam specimen by means of 20-noded parabolic-isoparametric finite elements. At the free surface, the strain energy release rate was found to be substantially smaller than the plane strain value; this is suggested to be due to the free-surface effect that exists where the delamination meets the surface edge.

Raju, I. S.↗

Three-dimensional finite-element elastic analysis of a thermally cycled single-edge wedge geometry specimen

An elastic stress analysis was performed on a wedge specimen (prismatic bar with single-wedge cross section) subjected to thermal cycles in fluidized beds. Seven different combinations consisting of three alloys (NASA TAZ-8A, 316 stainless steel, and A-286) and four thermal cycling conditions were analyzed. The analyses were performed as a joint effort of two laboratories using different models and computer programs (NASTRAN and ISO3DQ). Stress, strain, and temperature results are presented.

Bizon, P. T.↗

Elastic analysis of a mode II fatigue crack test specimen

Elastic displacements and stress intensity measurements for a mode II specimen have been obtained over a range of a/W values between 0.500 and 0.900 using the MARC general purpose finite element program. Stress intensity factors were experimentally determined using load point displacement values. Good general agreement between numerical and experimental results for crack mouth, crack surface, and load point displacements, and for stress intensity factors, demonstrates the accuracy of the present method.

Gross, B.↗

Towards an Aero-Propulso-Servo-Elasticity Analysis of a Commercial Supersonic Transport

This paper covers the development of an aero-propulso-servo-elastic (APSE) model using computational fluid dynamics (CFD) and linear structural deformations. The APSE model provides the integration of the following two previously developed nonlinear dynamic simulations: a variable cycle turbofan engine and an elastic supersonic commercial transport vehicle. The primary focus of this study is to provide a means to include relevant dynamics of a turbomachinery propulsion system into the aeroelastic studies conducted during a vehicle design, which have historically neglected propulsion effects. A high fidelity CFD tool is used here for the integration platform. The elastic vehicle neglecting the propulsion system serves as a comparison of traditional approaches to the APSE results. An overview of the methodology is presented for integrating the propulsion system and elastic vehicle. Static aeroelastic analysis comparisons between the traditional and developed APSE models for a wing tip detection indicate that the propulsion system impact on the vehicle elastic response could increase the detection by approximately ten percent.

aeroservoelasticity↗

Wellbore injectivity response to step-rate CO 2 injection: Coupled thermo-poro-elastic analysis in a vertically heterogeneous formation

Safe and permanent carbon geological storages require an elaborate analysis of geomechanical stability. Subsurface injection of CO 2 changes the local temperature and pore pressure and, further, alters the stress due to thermo-poro-elastic responses. A permanent CO 2 storage testing was conducted in the water leg of Cranfield reservoir in Mississippi, USA, where hosted CO 2 enhanced-oil recovery activities. During CO 2 injection, the injection rate was ramped up twice but the bottom-hole pressure did not increase with the imposed injection rates as expected. This unexpected field observation suggests the possibility of an open-mode fracture development at the injector. However, the injector response and potential fracture development have not been rigorously interpreted with detailed near-wellbore temperature and pore pressure change upon the CO 2 injection. In this study, we performed history matching of CO 2 injection using coupled thermo-poro-elastic reservoir simulation to examine the possibility of fracturing. We built a reservoir model including vertical heterogeneity in both petrophysical and geomechanical properties estimated from well-logging analysis and laboratory experiments. The simulation results show that CO 2 injection changes stresses and support the hypothesis of development of an open-mode fracture at the injector during the Cranfield test. The near-injector region exhibits a large temperature reduction up to 55 °C with ensuing effective horizontal stress reduction up to 9.1 MPa. However, a caprock integrity issue is unlikely because of the horizontal stress contrast within layers and low hydraulic communication with the injection zone. This work indicates that the injectant temperature should be considered in the design of high-rate CO 2 injector.

58 GEOSCIENCES↗

Application of boundary integral method to elastic analysis of V-notched beams

A semidirect boundary integral method, using Airy's stress function and its derivatives in Green's boundary integral formula, is used to obtain an accurate numerical solution for elastic stress and strain fields in V-notched beams in pure bending. The proper choice of nodal spacing on the boundary is shown to be necessary to achieve an accurate stress field in the vicinity of the tip of the notch. Excellent agreement is obtained with the results of the collocation method of solution.

Rzasnicki, W.↗

Dissociated vacancies and screw dislocations in MgO and UO 2 : atomistic modeling and linear elasticity analysis

Understanding the effect of dislocations on the mass transport in ionic ceramics is important for understanding the behavior of these materials in a variety of contexts. In particular, the dissociated nature of vacancies at screw dislocations, or more generally, at a wide range of low-angle twist grain-boundaries, has ramifications for the mechanism of defect migration and thus mass transport at these microstructural features. In this paper, a systematic study of the dissociated vacancies at screw dislocations in MgO is carried out. The important role of stress migration in the atomistic modeling study is identified. Another aspect of the current work is a rigorous treatment of the linear elasticity model. As a result, good agreement between the atomistic modeling results and the linear elasticity model is obtained. Furthermore, we demonstrate that the proposed vacancy dissociation mechanism can also be extended to more complicated ionic ceramics such as UO 2 , highlighting the generality of the mechanism.

36 MATERIALS SCIENCE↗

Thermo-Elastic Analysis of Internally Cooled Structures Using a Higher Order Theory

This paper presents the results of a study on the thermomechanical behavior of internally cooled silicon nitride structures. Silicon nitride is under consideration for elevated temperature aerospace engine applications. and techniques for lowering the operating temperature of structures composed of this material are under development. Lowering the operating temperature provides a large payoff in terms of fatigue life and may be accomplished through the use of thermal barrier coatings (TBC's) and the novel concept of included cooling channels. Herein, an in-depth study is performed on the behavior of a flame-impinged silicon nitride plate with a TBC and internal channels cooled by forced air. The analysis is performed using the higher order theory for functionally graded materials (HOTFGM), which has been developed through NASA Glenn Research Center funding over the past several years. HOTFGM was chosen over the traditional finite element approach as a prelude to an examination of functionally graded silicon nitride structures for which HOTFGM is ideally suited. To accommodate the analysis requirement% of the internally cooled plate problem, two crucial enhancements were made to the two-dimensional Cartesian-based version of HOTFGM. namely, incorporation of internal boundary capabilities and incorporation of convective boundary conditions. Results indicate the viability and large benefits of cooling the plate via forced air through cooling channels. Furthermore, cooling can positively impact the stress and displacement fields present in the plate, yielding an additional payoff in terms of fatigue life. Finally, a spin-off capability resulted from inclusion of internal boundaries within HOTFGM; the ability to simulate the thermo-elastic response of structures with curved surfaces. This new capability is demonstrated, and through comparison with an analytical solution, shown to be viable and accurate.

Arnold, Steven M.↗

Testing Job Submission to FermiGrid via Dask on the Fermilab Elastic Analysis Facility

Over the course of a summer internship, Jobsub Lite task submission and Dask operations were tested in development and production EAF at Fermilab, first via terminal and subsequently via Jupyter notebook cell. Testing allowed for development of a script available to EAF users that expands and makes easier access to parallel computing resources at Fermilab and associated sites.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗