SEARCH · Search NASA
Results for “electrolytic ammonia synthesis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Temperature-dependent solid electrolyte interphase reactions drive performance in lithium-mediated nitrogen reduction to ammonia
The solid electrolyte interphase (SEI) is a vital component to control mass transport and selectivity in the lithium-mediated reduction of N 2 to NH 3 (Li-N 2 R). Finding strategies that generate the optimal SEI, a complex network of organic and inorganic species, can potentially improve Li-N 2 R performance. Here, we unravel structure-property relationships of the SEI by correlating its composition with the NH 3 faradaic efficiency (FENH3). By modifying the reaction temperature, we alter electrolyte decomposition reactions and observe changes in the SEI that explain FE NH3 trends between electrolyte solvents. We quantify a complex reaction environment at elevated temperatures where SEI formation is counteracted by etching reactions. This tradeoff leads to temporal fluctuations of FE NH3 , but the maximal FE NH3 can reach up to 40%, the highest value reported for batch cells at ambient pressure, thus far. In conclusion, our work underscores the potential of novel electrolytes that steer SEI selectivity and, ultimately, improve Li-N 2 R performance.
Intermediate-Temperature Proton Exchange Membranes Based on Cerium Ultraphosphate Composited with Polybenzimidazole
This paper reports the rational fabrication and structural, thermal, mechanical and electrochemical characterization of a new type of intermediate-temperature (IT) polymer-inorganic composite (PIC) proton exchange membranes (PEMs) that are made of cerium ultraphosphate (CeP 5 O 14 —CUP) as the solid-state proton conductor composited with a high-temperature (HT) polybenzimidazole (PBI) as the polymeric binder. Here, flexible PBI-CUP PIC membranes with the thickness of ~135 μ m and CUP mass fraction of up to 75% were prepared by solution-casting without additional acid-doping (e.g., phosphoric acid). The proton conductivity of the fabricated IT-PIC-PEMs was up to 5.80 × 10 –2 S cm –1 as measured from a prototype IT PEM fuel cell (PEMFC) operated at 200 °C in the humidified hydrogen and air environment. This type of IT-PIC-PEMs also demonstrated sufficient mechanical strength and flexibility, excellent thermal stability (up to 350 °C), and very good durability of the proton conductivity (within the test duration of 500 h). The present experimental study shows the promising future of the IT-PIC-PEMs for applications in various IT electrochemical processes including IT-PEMFCs, IT-electrolyzers, etc.
Unveiling the mechanism of lithium-mediated nitrogen reduction via operando X-ray scattering in a flow cell with hydrogen oxidation
The lithium-mediated nitrogen reduction reaction (Li-NRR) is currently the most promising strategy for electrochemical ammonia synthesis. In this study, we present an operando grazing incidence wide angle X-ray scattering (GI WAXS) investigation using an improved electrochemical flow cell that enables hydrogen oxidation at the anode and thereby eliminates the need of a sacrificial proton donor. The improved cell design also increases nitrogen availability and mass transport, achieving ammonia faradaic efficiencies (FEs) up to 36%. This setup allows direct analysis of reaction intermediates and the solid electrolyte interphase (SEI) using state-of-the-art diglyme-based electrolytes. We identify lithium amide (LiNH2) as the only stable, crystalline intermediate, providing direct insight into the Li-NRR mechanism. Notably, in diglyme-based electrolytes, the SEI composition differs significantly from that in tetrahydrofuran-based systems, with reduced LiF content and the formation of previously unreported crystalline diglyme–lithium salt complexes. These species likely influence ammonia selectivity and long-term stability. Our findings highlight how the electrolyte composition and cell architecture govern Li-NRR selectivity and efficiency, offering a foundation for the rational design of next-generation SEI layers and solid electrolytes to enable scalable electrochemical ammonia synthesis.
Synergistic Multisites Fe 2 Mo 6 S 8 Electrocatalysts for Ambient Nitrogen Conversion to Ammonia
Electrochemical hydrogenation of N 2 under ambient conditions is attractive for sustainable and distributable NH 3 production but is limited by the lack of selective electrocatalysts. In this work, we describe active site motifs based on the Chevrel phase chalcogenide Fe 2 Mo 6 S 8 that exhibit intrinsic activities for converting N 2 to NH 3 in aqueous electrolytes. Despite having a very low specific surface area of ~2 m 2 /g, this catalyst exhibited a Faradaic efficiency of 12.5% and an average rate of 70 μg h –1 mg cat –1 for NH 3 production at -0.20 V vs RHE. Such activities were attributed to the unique composition and structure of Fe 2 Mo 6 S 8 that provide synergistic multisites for activating and associating key reaction intermediates. Specifically, Fe/Mo sites assist adsorption and activation of N 2 , whereas S sites stabilize hydrogen intermediate H ad * for N 2 hydrogenation. Fe in Fe 2 Mo 6 S 8 enhances binding of S with H ad * and thus inhibits the competing hydrogen evolution reaction. The spatial geometry of Fe, Mo, and S sites in Fe 2 Mo 6 S 8 promotes conversion of N 2 –H ad * association intermediates, reaching a turnover frequency of ~0.23 s –1 for NH 3 production.
Co 2 Mo 6 S 8 Catalyzes Nearly Exclusive Electrochemical Nitrate Conversion to Ammonia with Enzyme-like Activity
Electrocatalytic nitrate to ammonia conversion is a key reaction for energy and environmental sustainability. This reaction involves complex multi electron and proton transfer steps, and is impeded by the lack of catalyst for promoting both reactivity and ammonia selectivity. Here, we demonstrate active motifs based on the Chevrel phase Co 2 Mo 6 S 8 exhibit an enzyme-like high turnover frequency of ~95.1 s –1 for nitrate electroreduction to ammonia. We reveal strong synergy of multiple binding sites on this catalyst, such that the ligand effect of Co steers H ad* toward hydrogenation other than hydrogen evolution, the ensemble effect of Co, and the spatial confinement effect that promote the full hydrogenation of NO x to ammonia without N–N coupling. The catalyst exhibits almost exclusive ammonia conversion with a Faradaic efficiency of 97.1% and ammonia yielding rate of 115.5 mmol·g cat –1 ·h –1 in neutral electrolytes. The high activity was also confirmed in electrolytes with dilute nitrate and high chloride concentrations.
Robust Copper-Based Nanosponge Architecture Decorated by Ruthenium with Enhanced Electrocatalytic Performance for Ambient Nitrogen Reduction to Ammonia
Electrochemical conversion of nitrogen to green ammonia is an attractive alternative to the Haber–Bosch process. However, it is currently bottlenecked by the lack of highly efficient electrocatalysts to drive the sluggish nitrogen reduction reaction (N2RR). In this work, we strategically design a cost-effective bimetallic Ru–Cu mixture catalyst in a nanosponge (NS) architecture via a rapid and facile method. The porous NS mixture catalysts exhibit a large electrochemical active surface area and enhanced specific activity arising from the charge redistribution for improved activation and adsorption of the activated nitrogen species. Benefiting from the synergistic effect of the Cu constituent on morphology decoration and thermodynamic suppression of the competing hydrogen evolution reaction, the optimized Ru 0.15 Cu 0.85 NS catalyst presents an impressive N 2 RR performance with an ammonia yield rate of 26.25 μg h –1 mg cat. –1 (corresponding to 10.5 μg h –1 cm –2 ) and Faradic efficiency of 4.39% as well as superior stability in alkaline medium, which was superior to that of monometallic Ru and Cu nanostructures. Additionally, this work develops a new bimetallic combination of Ru and Cu, which promotes the strategy to design efficient electrocatalysts for electrochemical ammonia production under ambient conditions.
Molybdenum Carbide Electrocatalysts for Electrochemical Synthesis of Ammonia from Nitrogen: Activity and Stability
Ammonia production has increased from few thousand tons in 1908 to above 200 million tons per year today, revolutionizing the fertilizer industry thanks to the Haber-Bosch (HB) process. However, the HB process is highly energy intensive consuming about 1.4% of fossil energy generated worldwide and releasing 1.87 tons of CO 2 per ton of ammonia produced. This further reduces ammonia’s scope as a carrier fuel for the hydrogen economy. Hence, finding alternative energy efficient ways to synthesize ammonia is important from more than one perspective. Ammonia synthesis from its constituent nitrogen and hydrogen gases is mainly hampered by the nitrogen reduction reaction (NRR) due to the strong N≡N bond (945 kJ mol −1 ). Electrochemical synthesis (ES) routes in this regard offer a milder approach. However, ES of ammonia under different temperatures, utilizing different electrolytes and catalysts has not yet reliably produced ammonia at viable rates and efficiencies. We report an origami-like Mo 2 C cathode catalyst for NRR that achieved a maximum synthesis rate of 2.16 × 10 −11 mol cm −2 s −1 and a faradaic efficiency of 1.8% at 30 °C using Nafion-212 as electrolyte. Origami-like morphology containing numerous kinks appears to improve electrocatalytic activity and show a promising route for fabricating NRR catalysts with higher catalytic activity.
Advanced Electrocatalysis for Energy and Environmental Sustainability via Water and Nitrogen Reactions
Abstract Clean and efficient energy storage and conversion via sustainable water and nitrogen reactions have attracted substantial attention to address the energy and environmental issues due to the overwhelming use of fossil fuels. These electrochemical reactions are crucial for desirable clean energy technologies, including advanced water electrolyzers, hydrogen fuel cells, and ammonia electrosynthesis and utilization. Their sluggish reaction kinetics lead to inefficient energy conversion. Innovative electrocatalysis, i.e., catalysis at the interface between the electrode and electrolyte to facilitate charge transfer and mass transport, plays a vital role in boosting energy conversion efficiency and providing sufficient performance and durability for these energy technologies. Herein, a comprehensive review on recent progress, achievements, and remaining challenges for these electrocatalysis processes related to water (i.e., oxygen evolution reaction, OER, and oxygen reduction reaction, ORR) and nitrogen (i.e., nitrogen reduction reaction, NRR, for ammonia synthesis and ammonia oxidation reaction, AOR, for energy utilization) is provided. Catalysts, electrolytes, and interfaces between the two within electrodes for these electrocatalysis processes are discussed. The primary emphasis is device performance of OER‐related proton exchange membrane (PEM) electrolyzers, ORR‐related PEM fuel cells, NRR‐driven ammonia electrosynthesis from water and nitrogen, and AOR‐related direct ammonia fuel cells.
In Situ Neutron Reflectometry Reveals the Interfacial Microenvironment Driving Electrochemical Ammonia Synthesis
Electrified interfaces are critical to the performance of energy systems and often demonstrate substantial complexity under operating conditions. A nanoscale understanding of the interfacial microenvironment, i.e., the solid-electrolyte interphase (SEI), in lithium-mediated nitrogen reduction (Li–N 2 R) is key for realizing efficient ammonia (NH 3 ) production. Herein, we used time-resolved neutron reflectometry (NR) to observe SEI formation under Li–N 2 R conditions. We found that the LiBF 4 -based electrolyte provided a substantially more well-defined SEI layer than previous SEI NR interrogations that used LiClO 4 , highlighting the underlying chemistry that dictates electrolyte design and enabling new NR-based studies. Using in situ NR, we found that the LiBF 4 -derived SEI under Li–N 2 R conditions comprises a thick, diffuse outer layer and a thin, compact inner layer at low current cycling (<2 mA/cm 2 ), revealing a structure which ex situ studies have not been able to probe. Increased current cycling and sustained current cycling led to the merging of the layers into a single-layer SEI. Here, we used isotope contrast methods with d 6 -EtOH and d 8 -THF to drive time-resolved tracking of SEI growth at low current cycling, revealing that the proton donor modifies the inner layer, and the solvent modifies the outer layer. Li dendritic growth was observed in the absence of a proton donor. Neutron absorption also indicated the presence of boron in the SEI, underscoring the value of neutron-based interrogation. Our results inform Li-based systems and reaction microenvironments, and these methods can be applied broadly to interfacial energy technologies.
Atomic Molybdenum for Synthesis of Ammonia with 50% Faradic Efficiency
The electrochemical dinitrogen (N 2 ) reduction reaction (NRR) under ambient conditions has gained significant interest as an environmentally friendly alternative to the traditional Haber–Bosch process for the synthesis of ammonia (NH 3 ). However, up to now, most of the reported NRR electrocatalysts with satisfactory catalytic activities have been hindered by the large overpotential in N 2 activation. The preparation of highly efficient Mo-based NRR electrocatalyst in acidic electrolytes under ambient conditions is demonstrated here, consisting of stabilized single Mo atoms anchored on holey nitrogen-doped graphene synthesized through a convenient potassium-salt-assisted activation method. At -0.05 V versus a reversible hydrogen electrode (RHE), an electrode consisting of the resultant electrocatalyst immobilized on carbon fiber paper can attain an exceptional Faradaic efficiency of 50.2% and a NH3 yield rate of 3.6 µg h -1 mg cat -1 with low overpotentials. Density functional theory calculations further unveil that compared to the original graphene without holes, the edge coordinated Mo atoms and the existence of vacancies on holey graphene lower the overpotential of N 2 reduction, thereby promoting the NRR catalytic activity. Finally, this work could provide new guidelines for future designs in single-atom catalysis that would be beneficial to ambient N 2 fixation, and replacement of classical synthesis processes that are very energy-intensive.
High-Rate, Selective Electrosynthesis of Cyclohexanone Oxime via In Situ Generation and Release of Hydroxylamine on Bismuth
Oxime compounds are key industrial intermediates for nylon precursors and commodity chemicals. However, conventional routes rely on multistep reactions and hydroxylamine (NH 2 OH) salts, raising significant safety and sustainability concerns. Although electrosynthesis offers an alternative, oxime formation on d-block transition metals suffers from poor selectivity, as nitrogen oxyanion intermediates bind strongly to the surface and are readily over-reduced to ammonia. Here, we report morphology-controlled p-block bismuth rhombic dodecahedra (Bi RDs) that promote in situ NH 2 OH generation and its desorption into the electrolyte, enabling an electrochemical-chemical decoupled route for cyclohexanone oxime (CHO) synthesis. Bi RDs deliver nearly 100% Faradaic efficiency (FE) at −0.5 V vs. RHE and a yield of 1.4 mmol h –1 cm –2 at −0.9 V vs. RHE in an H-cell, while maintaining a CHO selectivity of nearly 100% at 100 mA cm –2 in a flow cell. Under identical conditions, d-block electrodes (Cu, Pd, Ag) show FE below 30%. Density functional theory calculations reveal that Bi 6p orbital-derived surface states weaken intermediate binding and facilitate NH 2 OH desorption, suppressing over-reduction. Kinetic analysis, post-addition trapping experiments, and in situ ATR-FTIR and Raman spectroscopy suggest the following reaction mechanism: NH 2 OH is selectively generated at the electrode surface, released as a freely diffusing intermediate, and undergoes homogeneous condensation with cyclohexanone in the bulk electrolyte, bypassing the surface-confined Langmuir–Hinshelwood pathway. These findings demonstrate that regulating intermediate desorption through p-block orbital chemistry provides a general strategy for achieving high selectivity in electro-organic nitrogen synthesis.
Protonic Ceramic Electrochemical Cells for Synthesizing Sustainable Chemicals and Fuels
Abstract Protonic ceramic electrochemical cells (PCECs) have been intensively studied as the technology that can be employed for power generation, energy storage, and sustainable chemical synthesis. Recently, there have been substantial advances in electrolyte and electrode materials for improving the performance of protonic ceramic fuel cells and protonic ceramic electrolyzers. However, the electrocatalytic materials development for synthesizing chemicals in PCECs has gained less attention, and there is a lack of systematic and fundamental understanding of the PCEC reactor design, reaction mechanisms, and electrode materials. This review comprehensively summarizes and critically evaluates the most up‐to‐date progress in employing PCECs to synthesize a wide range of chemicals, including ammonia, carbon monoxide, methane, light olefins, and aromatics. Factors that impact the conversion, selectivity, product yield, and energy efficiencies are discussed to provide new insights into designing electrochemical cells, developing electrode materials, and achieving economically viable chemical synthesis. The primary challenges associated with producing chemicals in PCECs are highlighted. Approaches to tackle these challenges are then offered, with a particular focus on deliberately designing electrode materials, aiming to achieve practically valuable product yield and energy efficiency. Finally, perspectives on the future development of PCECs for synthesizing sustainable chemicals are provided.
Plasma-Assisted Surface Nitridation of Proton Intercalatable WO 3 for Efficient Electrocatalytic Ammonia Synthesis
Electrocatalytic nitrogen reduction (eNRR) offers a green pathway for the production of NH 3 from N 2 and H 2 O under ambient conditions. Transition metal oxynitrides (TMO x N y ) are among the most promising catalysts but face challenges in achieving a high yield and faradaic efficiency (FE). This work develops a hybrid WO x N y /WO 3 catalyst with a unique heterogeneous interfacial complexion (HIC) structure. This design enables in situ generation and delivery of highly active hydrogen atoms (H*) in acidic electrolytes, promoting nitrogen hydrogenation and the formation of nitrogen vacancies (Nv) on the WO x N y surface. This significantly enhances the selectivity of eNRR for NH 3 synthesis while suppressing the hydrogen evolution reaction (HER). A simple two-step fabrication process─microwave hydrothermal growth followed by plasma-assisted surface nitridation─was developed to fabricate the designed catalyst electrode, achieving an NH 3 yield of 3.2 × 10 –10 mol·cm –2 ·s –1 with 40.1% FE, outperforming most TMN/TMO x N y electrocatalysts. Multiple control experiments confirm that the eNRR follows an HIC-enhanced Mars–van Krevelen (MvK) mechanism.
Ammonia Electrosynthesis from Nitrate Using a Ruthenium–Copper Cocatalyst System: A Full Concentration Range Study
Electrochemical synthesis of ammonia via the nitrate reduction reaction (NO3RR) has been intensively researched as an alternative to the traditional Haber–Bosch process. Most research focuses on the low concentration range representative of the nitrate level in wastewater, leaving the high concentration range, which exists in nuclear and fertilizer wastes, unexplored. The use of a concentrated electrolyte (≥1 M) for higher rate production is hampered by poor hydrogen transfer kinetics. Herein, we demonstrate that a cocatalytic system of Ru/Cu 2 O catalyst enables NO3RR at 10.0 A in 1 M nitrate electrolyte in a 16 cm 2 flow electrolyzer, with 100% faradaic efficiency toward ammonia. Detailed mechanistic studies by deuterium labeling and operando Fourier transform infrared (FTIR) spectroscopy allow us to probe the hydrogen transfer rate and intermediate species on Ru/Cu 2 O. Ab initio molecular dynamics (AIMD) simulations reveal that adsorbed hydroxide on Ru nanoparticles increases the density of the hydrogen-bonded water network near the Cu 2 O surface, which promotes the hydrogen transfer rate. Finally, our work highlights the importance of engineering synergistic interactions in cocatalysts for addressing the kinetic bottleneck in electrosynthesis.
Calcium-mediated nitrogen reduction for electrochemical ammonia synthesis
Ammonia (NH 3 ) is a key commodity chemical for the agricultural, textile and pharmaceutical industries, but its production via the Haber–Bosch process is carbon-intensive and centralized. Alternatively, an electrochemical method could enable decentralized, ambient NH 3 production that can be paired with renewable energy. The first verified electrochemical method for NH 3 synthesis was a process mediated by lithium (Li) in organic electrolytes. So far, however, elements other than Li remain unexplored in this process for potential benefits in efficiency, reaction rates, device design, abundance and stability. In our demonstration of a Li-free system, we found that calcium can mediate the reduction of nitrogen for NH 3 synthesis. Here we verified the calcium-mediated process using a rigorous protocol and achieved an NH 3 Faradaic efficiency of 40 ± 2% using calcium tetrakis(hexafluoroisopropyloxy)borate (Ca[B(hfip) 4 ] 2 ) as the electrolyte. Our results offer the possibility of using abundant materials for the electrochemical production of NH 3 , a critical chemical precursor and promising energy vector
Stability Enhancement in Na 0.67 Fe 0.2 Mn 0.8 O 2 Positive Electrodes via Spherical Coprecipitated Hydroxide Precursor Synthesis for Na-Ion Batteries
Mn/Fe-based layered transition metal oxides (LTMOs) are promising positive electrode materials for sodium-ion batteries (SIBs) due to their high abundance, low cost, and stable price fluctuations. At commercial scale, the fabrication of these materials commonly employs coprecipitation of hydroxide precursors, which allows for the scalable synthesis of uniform, dense particles with a tunable morphology. However, the common chelating agent (ammonia) forms unstable complexes with Fe 2+ ions, resulting in uncontrollable particle morphology and poor electrochemical properties. Here, in this study, three chelation strategies (no chelation, ammonia, oxalate) for Fe/Mn-based hydroxides are evaluated. It was found that oxalate chelation produced uniform, dense spherical hydroxide particles while particles via ammonia / no chelate routes exhibited no morphological control. The LTMOs synthesized from the oxalate-chelated hydroxide precursor formed uniform spherical particles, while the other two LTMOs showed greater variation in particle morphology. The oxalate-chelated LTMO electrode exhibited increased cycling stability due to reduced parasitic reactions with the electrolyte, as characterized by static leakage current measurements and electrochemical impedance spectroscopy.
Bimetallic NiCo boride nanoparticles confined in a MXene network enable efficient ambient ammonia electrosynthesis
Ambient electrocatalytic nitrogen fixation is an emerging technology for green ammonia synthesis, but the absence of optimized, stable and performant catalysts can render its practical application challenging. Herein, bimetallic NiCo boride nanoparticles confined in MXene are shown to accomplish high-performance nitrogen reduction electrolysis. Taking advantage of the synergistic effect in specific compositions with unique electronic d and p orbits and typical architecture of rich nanosized particles embedded in the interconnected conductive network, the synthesized MXene@NiCoB composite demonstrates extensive improvements in nitrogen molecule chemisorption, active area exposure and charge transport. As a result, optimal NH 3 yield rate of 38.7 μg h -1 mgcat. -1 and Faradaic efficiency of 6.92% are acquired in 0.1 M Na 2 SO 4 electrolyte. Moreover, the great catalytic performance can be almost entirely maintained in the cases of repeatedly-cycled and long-term electrolysis. Theoretical investigations reveal that the nitrogen reduction reaction on MXene@NiCoB catalyst proceeds according to the distal pathway, with a distinctly-reduced energy barrier relative to the Co 2 B counterpart. In conclusion, this work may inspire a new route towards the rational catalyst design for the nitrogen reduction reaction.