Search NASA⌕ Search

SEARCH · Search NASA

Results for “electromagnetic probes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Wind measurements by electromagnetic probes

The emerging technology of electromagnetic probing of the atmosphere to measure winds used in a space vehicle ascent winds load calculations is presented. The frequency range, altitude, and resolution for the following probes are presented: lidars, microwave radars, and clear-air Doppler radars (popularly known as wind profilers). The electromagnetic probing of the atmosphere by clear-air radars and lasers is the new technology to supplement balloon-borne wind sensors used to determine ascent wind loads of space vehicles. The electromagnetic probes measure the wind velocity using the Doppler effect. This is the radar technology used in MSFC's Radar Wind Profiler, and is similar to the technology used in conventional Doppler systems except that the frequency is generally lower, antenna is bigger, and dwell time much longer. Designed for unattended and automated instrumentation in providing measurements of the wind in the troposphere, the profiler employs Doppler radar technology and is currently being put in operation at NASA Kennedy Space Center, Florida.

Susko, Michael↗

Report on INT Program 14-3. Heavy Flavor and Electromagnetic Probes

The Institute for Nuclear Theory program, Heavy Flavor and Electromagnetic Probes in Heavy-Ion Collisions (INT 14-3), was held 15 September to 10 October 2014. In addition to the four organizers: Ramona Vogt (LLNL and UC Davis), Peter Petreczky (BNL), Anthony Frawley (Florida State), and Enrico Scomparin (INFN Torino), the program was attended by 34 other participants spread out over the four week period. Almost all participants were recognized experts in the field and were invited to take part. Eight of the participants were postdocs and five were women. There are two main thrusts to the study of heavy quarks and quarkonia in heavy-ion physics: “hot matter” (effects specific to the high temperature medium produced in heavy-ion or nucleus-nucleus collisions) and “cold nuclear matter” (effects that are present already in proton-nucleus collisions and are a baseline against which hot matter effects must be compared) as well as production of the heavy quarks and quarkonium (bound states of heavy quark-antiquark pairs) in perturbative QCD. Unfortunately, due to last minute cancellations the topic of electromagnetic probes was underrep- resented. While some of these involved unforeseen personal issues, others were related to the QCD town meeting that coincided with the first week of the program and to the beginning of classes at some universities. The program was structured so that the first two weeks were generally devoted to hot matter, especially lattice QCD. The second half was devoted to issues related to production and cold matter effects. An intense 2.5 day workshop, from 29 September to 1 October, with participants from both areas, bridged the two halves of the program. Aside from the workshop days, the program consisted of one to two talks of at least an hour in the morn- ing with time in the afternoon available for work, group discussion, and/or smaller collaborative discussions. Although a theory program, experimentalists attended throughout, giving talks on recent data and future facilities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Localized Electromagnetic Probing for Failure Analysis in Noisy Environments

Local electromagnetic probing was developed to allow investigation of a variety of devices in noisy electrical environments. The quality and applicability of this technique was assessed during this one year LDRD. To obtain details about the experimental setup, the devices imaged, and the experimental details, please refer to the classified report from the project manager, Will Zortman, or the NSP IA lead, Kristina Czuchlewski.

42 ENGINEERING↗

Inspecting Friction Stir Welding using Electromagnetic Probes

A report describes the use of advanced electromagnetic probes to measure the dimensions, the spatial distribution of electrical conductivity, and related other properties of friction stir welds (FSWs) between parts made of the same or different aluminum alloy(s). The probes are of the type described in in another Tech Brief. To recapitulate: A probe of this type is essentially an eddy-current probe that includes a primary (driver) winding that meanders and multiple secondary (sensing) windings that meander along the primary winding. Electrical conductivity is commonly used as a measure of heat treatment and tempering of aluminum alloys, but prior to the development of these probes, the inadequate sensitivity and limited accuracy of electrical-conductivity probes precluded such use on FSWs between different aluminum alloys, and the resolution of those probes was inadequate for measurement of FSW dimensions with positions and metallurgical properties. In contrast, the present probes afford adequate accuracy and spatial resolution for the purposes of measuring the dimensions of FSW welds and correlating spatially varying electrical conductivities with metallurgical properties, including surface defects.

Kinchen, David G.↗

Electromagnetic probes: Theory and experiment

We review the current state of research on electromagnetic probes in the context of heavy-ion collisions. The focus is on thermal photons and dileptons which provide unique insights into the properties of the created hot and dense matter. This review is intended to provide an introductory overview of the topic as well as a discussion of recent theoretical and experimental results. In particular, we discuss the role of vector-meson spectral functions in the calculation of photon and dilepton rates and present recent results obtained from different frameworks. Furthermore, we will highlight the special role of photons and dileptons to provide information on observables such as the temperature, the lifetime, the polarization and the electrical conductivity of the produced medium as well as their use to learn about chiral symmetry restoration and phase transitions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Detection of Cracks at Welds in Steel Tubing Using Flux Focusing Electromagnetic Probe

The inspection of weldments in critical pressure vessel joints is a major concern in the nuclear power industry. Corrosive environments can speed the fatigue process and access to the critical area is often limited. Eddy current techniques have begun to be used to help overcome these obstacles [1]. As direct contact and couplants are not required, remote areas can be inspected by simply snaking an eddy current coil into the intake tube of the vessel. The drawback of the eddy current method has been the high sensitivity to small changes in the conductivity and permeability of the test piece which are known to vary at weldments [1]. The flaw detection mechanism of the flux focusing electromagnetic probe can help alleviate these difficulties and provide a unique capability for detecting longitudinal fatigue cracks in critical tube structures. The Flux Focusing Electromagnetic Flaw Detector, originally invented for the detection of fatigue and corrosion damage in aluminum plates [2-3], has been adapted for use in testing steel tubing for longitudinal fatigue cracks. The modified design allows for the probe to be placed axisymmetrically into the tubing, inducing eddy currents in the tube wall. The pickup coil of the probe is fixed slightly below the primary windings and is rotated 90 so that its axis is normal to the tube wall. The magnetic flux of the primary coil is focused through the use of ferromagnetic material so that in the absence of fatigue damage there will be no flux linkage with the pickup coil. The presence of a longitudinal fatigue crack will cause the eddy currents induced in the tube wall to flow around the flaw and directly under the pickup coil. The magnetic field associated with these currents will then link the pickup coil and an unambiguous increase in the output voltage of the probe will be measured. The use of the flux focusing electromagnetic probe is especially suited for the detection of flaws originating at or near tube welds. The probe is shown to discriminate against signals due solely to the weld joint so that flaw signals are not hidden in the background in these locations. Experimental and finite element modeling results are presented for the flaw detection capabilities of the probe in stainless steel tubes.

Wincheski, Buzz↗

Nuclear Research using the Electromagnetic Probe

This is the final progress report for the project titled "Nuclear Research Using the Electromagnetic Probe." Our primary objective was to gain a deeper understanding of the internal structure of protons and neutrons, which are the fundamental constituents of nucleons and nuclei. These building blocks, composed of quarks and gluons known as "partons," were the focal point of our investigation. We delved into the intrinsic properties of nucleons, including their mass, charge, and spin, within the framework of Quantum Chromodynamics (QCD), a theory describing the intricate interactions, often referred to as color interactions, between the constituents of nucleons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Feasibility study of a swept frequency electromagnetic probe (SWEEP) using inductive coupling for the determination of subsurface conductivity of the earth and water prospecting in arid regions

Techniques developed for electromagnetic probing of the lunar interior, and techniques developed for the generation of high power audio frequencies were combined to make practical a magnetic inductive coupling system for the rapid measurement of ground conductivity profiles which are helpful when prospecting for the presence and quality of subsurface water. A system which involves the measurement of the direction, intensity, and time phase of the magnetic field observed near the surface of the earth at a distance from a horizontal coil energized so as to create a field that penetrates the earth was designed and studied to deduce the conductivity and stratification of the subsurface. Theoretical studies and a rudimentary experiment in an arid region showed that the approach is conceptually valid and that this geophysical prospecting technique can be developed for the economical exploration of subterranean water resources.

Latorraca, G. A.↗

Radial flow from electromagnetic probes and signal of quark gluon plasma

An attempt has been made to extract the evolution of radial flow from the analysis of the experimental data on electromagnetic probes measured at the energies available at the CERN Super Proton Synchrotron (SPS) and the BNL Relativistic Heavy Ion Collider (RHIC). The transverse momentum (p{sub T}) spectra of photons and dileptons measured by the WA98 and NA60 Collaborations, respectively, at the SPS and the photon and dilepton spectra obtained by the PHENIX Collaboration at the RHIC have been used to constrain the theoretical models. We use the ratio of photon to dilepton spectra to extract the flow, where some model dependence is canceled out. Within the ambit of the present analysis we argue that the variation of the radial velocity with invariant mass is indicative of a phase transition from the initially produced partons to hadrons at SPS and RHIC energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electromagnetic Probes: A Chronometer of Heavy Ion Collision

I have known Predhiman for quite some time and I consider his friendship a great privilege. He along with some of his colleagues made the almost unique transition time to time from Quantum Electrodynamics of his (almost classical) electromagnetic plasma to Quantum Chromodynamics of quarks and gluons. Some of the papers are unique in the sense they surface up to the centre stage of the field of quarks and gluons giving us a new insight; the particular paper of Bannur and Kaw discussing the stability of quark gluon plasma is a particularly interesting one.I wish Predhiman the very best on this occasion and sincerely hope for a long vital and fruitful life that lies ahead.Interestingly enough this transition from QED (electromagnetic plasma) to QCD plasma (Quark Gluon Plasma) was motivated by consuming a very special kind of Indian soft nuts on Sunday afternoons, the consumers consisted of two persons, P. K. Kaw and Jitendra Parikh - some nuts!

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nucleon Structure Studies with Electromagnetic Probes

Summarized in this report is the progress achieved during the period from March 1, 2008 to June 14, 2009 under contract number DE-FG02-03ER41252. This is the final technical report under this contract. The experimental work described here is part of the electromagnetic nuclear physics program of the CEBAF Large Acceptance Spectrometer (CLAS) Collaboration at the Thomas Jefferson National Accelerator Facility (Jefferson Lab) that published 17 journal articles during the period of this report. One of these journal articles reported on the results of precise measurements of the neutron magnetic form factor. I was a spokesperson on this experiment and the publication of these results is the culmination of years of effort by a small subset of the CLAS Collaboration. As usual, undergraduate students were involved in all aspects of this work. Three Union College students participated in this program during the window of this report and one presented a paper on his work at the 2009 National Conference on Undergraduate Research (NCUR22). In this report, I discuss recent progress on the measurements of the neutron magnetic form factor and describe my service work for the CLAS Collaboration.

43 PARTICLE ACCELERATORS↗

Unpolarized nucleon structure studies utilizing polarized electromagnetic probes.

By the mid-1980s, measurements of the nucleon form factors had reached a stage where only slow, incremental progress was possible using unpolarized electron scattering. The development of high quality polarized beams, polarized targets, and recoil polarimeters led to a renaissance in the experimental program. I provide an overview of the changes in the field in the last ten years, which were driven by the dramatically improved data made possible by a new family of tools to measure polarization observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Probing electromagnetic nonreciprocity with quantum geometry of photonic states

Reciprocal and nonreciprocal effects in dielectric and magnetic materials provide crucial information about the microscopic properties of electrons. However, experimentally distinguishing the two has proven to be challenging, especially when the associated effects are extremely small. To this end, we propose a contactless detection using a cross-cavity device where a material of interest is placed at its center. We show that the optical properties of the material, such as Kerr and Faraday rotation, or birefringence, manifest in the coupling between the cavity's electromagnetic modes and in the shift of their resonant frequencies. By calculating the dynamics of a geometrical photonic state, we formulate a measurement protocol based on the quantum metric and quantum process tomography that isolates the individual components of the material's complex refractive index and minimizes the quantum mechanical Cramér-Rao bound on the variance of the associated parameter estimation. Our approach is expected to be applicable across a broad spectrum of experimental platforms including Fock states in optical cavities, or coherent states in microwave and THz resonators. Published by the American Physical Society 2025

Petrides, Ioannis (ORCID:0000000174842444)↗

Highlights of INT Program 14-3: Heavy Flavor and Electromagnetic Probes

The Institute for Nuclear Theory program, Heavy Flavor and Electro- magnetic Probes in Heavy-Ion Collisions (INT 14-3), was held 15 September to 10 October 2014. In addition to the four organizers: Ramona Vogt (LLNL and UC Davis), Peter Petreczky (BNL), Anthony Frawley (Florida State), and Enrico Scomparin (INFN Torino), the program was attended by 34 other participants spread out over the four week period. Almost all participants were recognized experts in the field and were invited to take part. Eight of the participants were postdocs and five were women. There are two main thrusts to the study of heavy quarks and quarkonia in heavy-ion physics: “hot matter” (effects specific to the high temperature medium produced in heavy-ion or nucleus-nucleus collisions) and “cold nu- clear matter” (effects that are present already in proton-nucleus collisions and are a baseline against which hot matter effects must be compared) as well as production of the heavy quarks and quarkonium (bound states of heavy quark-antiquark pairs) in perturbative QCD. The program was structured so that the first two weeks were generally devoted to hot matter, especially lattice QCD. The second half was devoted to issues related to production and cold matter effects. An intense 2.5 day workshop, from 29 September to 1 October. Although a theory program, experimentalists attended throughout, giving talks on recent data and future facilities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Polarization Experiments with Electromagnetic Probes (Final Technical Report)

The grant started in 1989 and finished on 31 July, 2018. The PI (Vina Punjabi) with many Norfolk State University (NSU) undergraduate students, and several research associates have been involved in many research activity during this period. NSU is primarily a minority institution. The PI has worked with one or two students every year, most of the students involved in her research went on to graduate schools to pursue degrees in physics, applied physics or engineering. One of the most important goal of the PI’s research activity has been involving NSU physics undergraduate students in forefront nuclear and particle physics research. (List of students and research associates is given in Appendix I). Over the years the PI, students and research associates participated in many research activity, however there are two main projects where the PI has been involved as one of the project leader. (1) Investigation of the structure of the deuteron at Saturne national lab in Saclay, France and at Laboratory of High Energy (LHE), part of the Joint Institute of Nuclear Research (JINR) lab in Dubna, Russia. (2) Measurement of the ratio of electric to magnetic form factors of the proton , GEp/GMp at Jefferson Lab, to study the internal structure of the proton.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗