Search NASA⌕ Search

SEARCH · Search NASA

Results for “electropolymerization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

12 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Implementing the donor–acceptor approach in electronically conducting copolymers via electropolymerization

Electropolymerization has become a convenient method for synthesizing and characterizing complex organic copolymers having intrinsic electronic conductivity, including the donor (D)–acceptor (A) class of electronically conducting polymers (ECPs). This review begins with an introduction to the electrosynthesis of common second-generation ECPs. The information obtainable from electroanalytical studies, charge carriers such as polarons (positive and negative) and bipolarons (positive and negative) and doping will be discussed. The evolutionary chain of ECPs is then presented. ECPs comprising electron-rich D and electron-deficient A moieties have been shown to possess intrinsic electronic conductivity and unique optical and electronic properties. They are third generation ECPs and electropolymerization of mixtures of D and A leads to stoichiometrically controlled block copolymers. These D–A type ECPs are discussed on the basis of selected representative materials. Since the discovery of electropolymerization as a powerful tool to synthesize copolymers of conjugated monomers with a pre-determined ratio of D and A repeat units present in the polymer, the field of D–A type ECPs has grown considerably and the literature available since 2004 to 2021 is summarized and tabulated. Electronic and optical properties of the materials determined by computational chemistry are presented. The data obtained from electrochemical and optical methods are compared with those obtained from computational methods and reasons for discrepancies are given. The literature on the concept of electropolymerization extended to synthesizing triblock and many-block copolymers is reviewed. Finally, applications of D–A polymers in optoelectronic devices (organic solar cells and field-effect transistors) and in bio-imaging are explained quoting appropriate examples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2005

Protection of 2-(3-Thienyl)ethanol with 3-Thienylacetic Acid and Hard Cross- Linked Conducting Films by Electropolymerization of the Ester

The ester (compound 1) of 2-(3-thienyl)ethanol (T-etOH) with 3-thienylacetic acid was synthesized as a monomer whose two thiophene groups could be electropolymerized independently, becoming members of different polymer chains in a highly-crosslinked highly-insoluble polymer. Indeed, 1 was electropolymerized successfully alone and together with 3-methylthiophene (3MeT). Films of poly(1) are hard (3H, as opposed to less than 6B for poly(3MeT)), and the close proximity of the polymeric strands creates pi-stacking interactions. The behavior of 1 suggests that by: (a) limiting the potential used for the oxidation of monomeric esters of T-etOH at the foot of their oxidation waves (less than 1.8 V vs. Ag/AgCl); and, (b) compensating for the decrease in the electrogenerated radical concentration by increasing the monomer concentration, practically all esters of T-etOH should be electropolymerizable. This was confirmed by durable film formation from the archetypical ester of T-etOH, the 2-(3-thienyl)ethyl acetate (T-etOAc), whose homo-electropolymerization is reported for the first time.

Leventis, Nicholas↗
DOE OSTI2021

Electropolymerized-molecularly imprinted polymers (E-MIPS) as sensing elements for the detection of dengue infection

Here, a straightforward in situ detection method for dengue infection was demonstrated through the molecular imprinting of a dengue nonstructural protein 1 (NS1) epitope into an electropolymerized molecularly imprinted polyterthiophene (E-MIP) film sensor. The key enabling step in the sensor fabrication is based on an epitope imprinting strategy, in which short peptide sequences derived from the original target molecules were employed as the main template for detection and analysis. The formation of the E-MIP sensor films was facilitated using cyclic voltammetry (CV) and monitored in situ by electrochemical quartz crystal microbalance (EC-QCM). Surface properties were analyzed using different techniques including atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and polarization modulation-infrared reflection-adsorption (PM-IRRAS). The standard calibration curve (R = 0.9830) was generated for the detection of the epitope, Ac-VHTWTEQYKFQ-NH 2 , with a linear range of 0.2 to 30 μg/mL and detection limit of 0.073 μg/mL. A separate calibration curve (R = 0.9786) was obtained using spiked buffered solutions of dengue NS1 protein, which resulted in a linear range of 0.2 to 10 μg/mL and a detection limit of 0.056 μg/mL. The fabricated E-MIP sensor exhibited long-term stability, high sensitivity, and good selectivity towards the targeted molecules. These results indicated that the formation of the exact and stable cavity imprints in terms of size, shape, and functionalities was successful. In our future work, we aim to use our E-MIP sensors for NS1 detection in real-life samples such as serum and blood.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Regulating lithium deposition via electropolymerization of acrylonitrile in rechargeable lithium metal batteries

Here, we report acrylonitrile (AN) as an effective additive in carbonate-based electrolytes to enable uniform and dense lithium (Li) deposition and to improve the coulombic efficiency of Li metal anode. Our electrochemical, spectroscopic, and theoretical study reveal that AN is cathodically electropolymerized on the Li surface prior to the electrochemical decomposition of the electrolyte during Li deposition. The resultant polyacrylonitrile artificial solid electrolyte interphase enables uniform nucleation and growth of Li deposition with significantly reduced side reactions. The effectiveness of the AN additive is demonstrated in 0.4 Ah Li||LiNi 0.6 Mn 0.2 Co 0.2 O 2 pouch cells (using 50-μm Li anode, 3 mAh cm -2 cathode areal capacity, and 4g Ah -1 electrolyte) with excellent cycle stability under realistic charge-discharge condition

25 ENERGY STORAGE↗
DOE OSTI2022

Spin-induced asymmetry reaction—The formation of asymmetric carbon by electropolymerization

We describe the spin polarization–induced chirogenic electropolymerization of achiral 2-vinylpyridine, which forms a layer of enantioenhanced isotactic polymer on the electrode. The product formed is enantioenriched in asymmetric carbon polymer. To confirm the chirality of the polymer film formed on the electrode, we also measured its electron spin polarization properties as a function of its thickness. Two methods were used: First, spin polarization was measured by applying magnetic contact atomic force microscopy, and second, magnetoresistance was assessed in a sandwich-like four-point contact structure. We observed high spin-selective electron transmission, even for a layer thickness of 120 nm. A correlation exists between the change in the circular dichroism signal and the change in the spin polarization, as a function of thickness. The spin-filtering efficiency increases with temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Kinetic Analysis of Proton-Coupled Electron Transfer at an Electrode-Immobilized Complex

An alkyne-terminated cobalt complex, [Co(Cp)(dppe ≡H )(Cl)] + (Cp = cyclopentadienyl; dppe ≡H = 1,2-bis-(di-(4-ethynyl-phenyl)phosphino)ethane), (Co ≡H ) was immobilized onto a glassy carbon electrode using two attachment strategies: Cu(I) catalyzed azide–alkyne click chemistry and reductive electropolymerization. The modified electrodes prepared through reductive electropolymerization exhibit current densities and peak resolutions for the electrochemical reduction of the cobalt species, which are amenable to electroanalytical quantification of coupled chemical reactions. Through peak shift analysis of cyclic voltammograms recorded in the presence of 4-chloroanilinium tetrafluoroborate, we quantified the proton transfer rate constant for the stepwise proton-coupled electron transfer reaction that reduces the electrode-immobilized [Co(Cp)(dppe ≡H )(Cl)] + to [H–Co(Cp)(dppe ≡H )] + (k PT app = (9.3 ± 1.8) × 10 5 M –1 s –1 ). In conclusion, the extraction of kinetic parameters for an elementary proton-coupled electron transfer reaction of an electrode-immobilized complex represents the first experimental measurement of its type and lays crucial groundwork for kinetic analyses of hybrid catalyst–electrode architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Grafted polythiophene pendent polymer brushes and their electronanopatterning

Here electrochemical nanolithography using grafted polymer brushes with terthiophene (3T) pendent was investigated. The film was fabricated by surface electropolymerization of a reversible addition-fragmentation chain-transfer agent macroinitiator containing a 3T pendant molecule and the subsequent polymer brush growth from a 3T functionalized methacrylate monomer (3T-Methacrylate). Electrochemical nanolithography and patterning were done using conducting atomic force microscopy (C-AFM) enabling precise nanopattern fabrication. In contrast to direct nanowriting, dip pen nanolithography, and nanolithographic additive manufacturing, the electrochemical nanolithography can be readily facilitated by applying a bias voltage between a conductive AFM tip and the grafted polymer brush film at ambient conditions and without ink transfer. The height and electrical resistance of the nanopatterns were dependent on the writing parameters (i.e. applied bias voltage and scan rate).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structural Tuning of Self‐Conductive Polymer as Gas Diffusion Layer for Electrocatalytic Reactions at High Current

Electrocatalytic conversions offer a promising route for sustainable chemical production using renewable energy. Gas diffusion layers (GDLs) enable selective product formation at high current densities but suffer from electrolyte flooding, and polytetrafluoroethylene (PTFE)-based GDLs typically require metal conductive layers, which constrain catalyst development. A recently developed GDL configuration, electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT)-coated PTFE, demonstrates notable flooding resistance, but suffers from gas diffusion limitations at elevated currents due to limited gas diffusion through the PEDOT layer. Here, different dopants in PEDOT are exploited to modify the physical properties and enhance gas transport. ClO 4 − -doped PEDOT exhibits superior performance due to optimized physical structure, leading to increased gas permeance and faradaic efficiency (FE) for CO production during electrocatalytic CO 2 reduction. Further optimization of coverage and thickness achieved by adjusting charge density led to an optimal configuration at 33 mC cm −2 . This GDL supports various metal electrocatalysts and demonstrates FE CO of > 90% for over 150 h at −200 mA cm −2 using a commercial silver electrocatalyst. This work highlights the importance of GDL engineering in enhancing performance and durability for long-term electrocatalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

All-organic self-separating three-dimensionally nanoarchitected electrochemical energy storage devices

This work realizes a three-dimensionally (3D) nanoarchitected, all organic, "self-separating" lithium-ion electrochemical energy storage (EES) device that is cycled as a solid-state full cell. The device is enabled by a monolithic carbon anode with a co-continuous pore network, derived from the structure direction of resols by an ultra-large molar mass block copolymer (BCP), poly(styrene-block-2-dimethylaminoethyl methacrylate) (SA). Electropolymerization of a single-phase conductive and redox-active material, poly((2,3-dihydrothieno[3,4-b][1,4]dioxin-2-yl)methyl 9,10-dioxo-9,10-dihydroanthracene-2-carboxylate) (PAQEDOT), into the pore space provides the cathode of the cell. The device is electronically contacted to the relevant electrode network enabled by the co-continuous nature of each electrode. Electrochemical processing via cycling against external lithium in an electrolyte generates a solid electrolyte interphase (SEI) as a separator and lithiates the cell electrodes, after which the EES device is cycled in the solid state. While the full cell does not demonstrate high cyclability, the best full cell demonstrates a discharge capacity of 267 milliamp hours per gram (mAh/g). This work marks, to the best of knowledge of the authors, the first example of an all-organic materials derived 3D nanoarchitected EES device, as well as the first design of "self-separating" cell fabrication. Furthermore, generalization of the design to another co-continuous carbon form factor is demonstrated.

FOS: Physical sciences↗
NASA NTRS1991

Silicon containing electroconductive polymers and structures made therefrom

An electropolymerized film comprised of polymers and copolymers of a monomer is formed on the surface of an anode. The finished structures have superior electrical and mechanical properties for use in applications such as electrostatic dissipation and for the reduction of the radar cross section of advanced aircraft.

Nagasubramanian, Ganesan↗
NASA NTRS2012

Radiation Shielding System Using a Composite of Carbon Nanotubes Loaded with Electropolymers

Single-wall carbon nanotubes (SWCNTs) coated with a hydrogen-rich, electrically conducting polymer such as polyethylene, receive and dissipate a portion of incoming radiation pulse energy to electrical signals that are transmitted along the CNT axes, and are received at energy-dissipating terminals. In this innovation, an array of highly aligned nanowires is grown using a strong electric field or another suitable orientation procedure. Polyethylene (PE), polymethymlethacrylate (PMMA), or other electrically conducting polymer is spin-coated onto the SWCNTs with an average thickness of a few hundred nanometers to a few tenths of micrometers to form a PE/SWCNT composite. Alternatively, the polymer is spin-coated onto the nanowire array or an anodized alumina membrane (AAM) to form a PE/metal core shell structure, or PE can be electropolymerized using the SWCNTs or the metal nanowires as an electrode to form a PE/SWCNT core shell structure. The core shell structures can be extruded as anisotropic fibers. A monomer can be polymerized in the presence of SWCNTs to form highly cross-linked PE/SWCNT films. Alternatively, Pb colloid solution can be impregnated into a three-dimensional PE/SWCNT nanostructure to form a PW/SWCNT/Pb composite structure. A face-centered cubic (FCC) arrangement provides up to 12 interconnection channels connected to each core, with transverse channel dimensions up to 20 nm, with adequate mechanical compressive strength, and with an associated electrical conductivity of around 3 Seimens/cm for currents ranging from 0.01 to 10 mA. This threedimensional nanostructure is used as a host material to house appropriate radiation shielding material such as hydrogen- rich polymer/CNT structures, metal nanoparticles, and nanowires. Thicknesses of this material required to attenuate 10 percent, 50 percent, and 90 percent of an incident beam (gamma, X-ray, ultraviolet, neutron, proton, and electron) at energies in the range of 0 440 MeV are being determined, for example, by measuring fluence rate reduction. For example, a radiation field arrives first at an exposed surface of the innovation and produces an associated first electric field within the metal-like fingers of the three-dimensional nanostructure. This field is intensified near the exposed tips of the fingers, and this intensified field generates an intensified second electric field near the adjacent exposed tips of the coated CNSs. This generates an associated electrical current in the CNSs, and the associated electropolymer coating. The current is received by the second substrate transport component and is transported to the dissipation mechanism located contiguously to the second substrate.

McKay, Chris↗