Search NASA⌕ Search

SEARCH · Search NASA

Results for “emission inventories”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Creating Accurate Methane Emission Inventories through Data-Driven Airborne Survey Strategies

Because natural gas emits less carbon than other fossil fuels, it holds promise as a green energy transition fuel. However, the overall carbon footprint of natural gas is significantly elevated by methane emissions that occur during its production and transmission (Cusworth et al. 2022). Methane “super-emitters,” while comprising only about 1% of sites, are responsible for the majority of oil- and gas-sourced methane emissions, making their detection and mitigation critical in reducing the climate impact of natural gas and in meeting national and global sustainability goals (Sherwin et al. 2024). Yet, despite advancements in detection, significant uncertainties remain regarding the size, frequency, and duration distributions of methane emissions (e.g., Frankenberg et al. 2016, Cusworth et al. 2022, Chen, Sherwin et al. 2022, Conrad et al. 2023, Johnson et al. 2023, Sherwin et al. 2024) underscoring the need for comprehensive emissions inventories segmented by basin across the US. Airborne surveys are well-suited for collecting data to build these comprehensive, basin-level inventories because they allow for extensive spatial coverage, and have the spatial resolution, and the sensitivity to pinpoint individual methane sources. As remote sensing technologies enable rapid basin-scale surveys, it is imperative to establish scientifically and statistically robust standards to generate reliable and actionable emissions inventories. Recent work has shown that differences in airborne sampling strategies, detection technologies, and analysis can lead to large differences between survey conclusions if not correctly accounted for (Chen et al. 2024). This elevates the importance of incorporating proper sampling and analysis techniques when designing a methane emissions monitoring campaign to produce accurate results and facilitate cross-study comparisons. In this paper, we describe a survey strategy designed using the latest conclusions from the literature to align results from different aerial surveys. We identify several sampling and analysis principles, including large sample sizes, balanced sampling across oil and gas production, careful survey area definition, and a unified protocol for analysis, to be vital to producing an unbiased estimate of basin-scale emissions. We present results from a Department of Energy-funded project that deployed this survey strategy in two understudied oil and gas- producing regions in the United States: the Haynesville Basin in Texas and Louisiana, and the Woodford Shale in the Anadarko Basin in Oklahoma.

03 NATURAL GAS↗
DOE OSTI2020

A global anthropogenic emission inventory of atmospheric pollutants from sector- and fuel-specific sources (1970–2017): an application of the Community Emissions Data System (CEDS)

Global anthropogenic emission inventories remain vital for understanding the sources of atmospheric pollution and the associated impacts on the environment, human health, and society. Rapid changes in today's society require that these inventories provide contemporary estimates of multiple atmospheric pollutants with both source sector and fuel type information to understand and effectively mitigate future impacts. To fill this need, we have updated the open-source Community Emissions Data System (CEDS) (Hoesly et al., 2019) to develop a new global emission inventory, CEDSGBD-MAPS. This inventory includes emissions of seven key atmospheric pollutants (NOx; CO; SO2; NH3; non-methane volatile organic compounds, NMVOCs; black carbon, BC; organic carbon, OC) over the time period from 1970–2017 and reports annual country-total emissions as a function of 11 anthropogenic sectors (agriculture; energy generation; industrial processes; on-road and non-road transportation; separate residential, commercial, and other sectors (RCO); waste; solvent use; and international shipping) and four fuel categories (total coal, solid biofuel, the sum of liquid-fuel and natural-gas combustion, and remaining process-level emissions). The CEDSGBD-MAPS inventory additionally includes monthly global gridded (0.5°?×?0.5°) emission fluxes for each compound, sector, and fuel type to facilitate their use in earth system models. CEDSGBD-MAPS utilizes updated activity data, updates to the core CEDS default scaling procedure, and modifications to the final procedures for emissions gridding and aggregation. Relative to the previous CEDS inventory (Hoesly et al., 2018), these updates extend the emission estimates from 2014 to 2017 and improve the overall agreement between CEDS and two widely used global bottom-up emission inventories. The CEDSGBD-MAPS inventory provides the most contemporary global emission estimates to date for these key atmospheric pollutants and is the first to provide global estimates for these species as a function of multiple fuel types and source sectors. Dominant sources of global NOx and SO2 emissions in 2017 include the combustion of oil, gas, and coal in the energy and industry sectors as well as on-road transportation and international shipping for NOx. Dominant sources of global CO emissions in 2017 include on-road transportation and residential biofuel combustion. Dominant global sources of carbonaceous aerosol in 2017 include residential biofuel combustion, on-road transportation (BC only), and emissions from the waste sector. Global emissions of NOx, SO2, CO, BC, and OC all peak in 2012 or earlier, with more recent emission reductions driven by large changes in emissions from China, North America, and Europe. In contrast, global emissions of NH3 and NMVOCs continuously increase between 1970 and 2017, with agriculture as a major source of global NH3 emissions and solvent use, energy, residential, and the on-road transport sectors as major sources of global NMVOCs. Due to similar development methods and underlying datasets, the CEDSGBD-MAPS emissions are expected to have consistent sources of uncertainty as other bottom-up inventories. The CEDSGBD-MAPS source code is publicly available online through GitHub: https://github.com/emcduffie/CEDS/tree/CEDS_GBD-MAPS (last access: 1 December 2020). The CEDSGBD-MAPS emission inventory dataset (both annual country-total and monthly global gridded files) is publicly available under https://doi.org/10.5281/zenodo.3754964 (McDuffie et al., 2020c).

Mcduffie, Erin↗
DOE OSTI2024

MIXv2: a long-term mosaic emission inventory for Asia (2010–2017)

The MIXv2 Asian emission inventory is developed under the framework of the Model Inter-Comparison Study for Asia (MICS-Asia) Phase IV and produced from a mosaic of up-to-date regional emission inventories. We estimated the emissions for anthropogenic and biomass burning sources covering 23 countries and regions in East, Southeast and South Asia and aggregated emissions to a uniform spatial and temporal resolution for seven sectors: power, industry, residential, transportation, agriculture, open biomass burning and shipping. Compared to MIXv1, we extended the dataset to 2010–2017, included emissions of open biomass burning and shipping, and provided model-ready emissions of SAPRC99, SAPRC07, and CB05. A series of unit-based point source information was incorporated covering power plants in China and India. A consistent speciation framework for non-methane volatile organic compounds (NMVOCs) was applied to develop emissions by three chemical mechanisms. The total Asian emissions for anthropogenic/open biomass sectors in 2017 are estimated as follows: 41.6/1.1 Tg NO x , 33.2/0.1 Tg SO 2 , 258.2/20.6 Tg CO, 61.8/8.2 Tg NMVOC, 28.3/0.3 Tg NH 3 , 24.0/2.6 Tg PM 10 , 16.7/2.0 Tg PM 2.5 , 2.7/0.1 Tg BC (black carbon), 5.3/0.9 Tg OC (organic carbon), and 18.0/0.4 Pg CO 2 . The contributions of India and Southeast Asia were emerging in Asia during 2010–2017, especially for SO 2 , NH 3 and particulate matter. Gridded emissions at a spatial resolution of 0.1° with monthly variations are now publicly available. This updated long-term emission mosaic inventory is ready to facilitate air quality and climate model simulations, as well as policymaking and associated analyses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Opinion: Coordinated development of emission inventories for climate forcers and air pollutants

Emissions into the atmosphere of fine particulate matter, its precursors, and precursors to tropospheric ozone impact not only human health and ecosystems, but also the climate by altering Earth's radiative balance. Accurately quantifying these impacts across local to global scales historically and in future scenarios requires emission inventories that are accurate, transparent, complete, comparable, and consistent. In an effort to better quantify the emissions and impacts of these pollutants, also called short-lived climate forcers (SLCFs), the Intergovernmental Panel on Climate Change (IPCC) is developing a new SLCF emissions methodology report. This report would supplement existing IPCC reporting guidance on greenhouse gas (GHG) emission inventories, which are currently used by inventory compilers to fulfill national reporting requirements under the United Nations Framework Convention on Climate Change (UNFCCC) and new requirements of the Enhanced Transparency Framework (ETF) under the Paris Agreement starting in 2024. We review the relevant issues, including how air pollutant and GHG inventory activities have historically been structured, as well as potential benefits, challenges, and recommendations for coordinating GHG and air pollutant inventory efforts. We argue that, while there are potential benefits to increasing coordination between air pollutant and GHG inventory development efforts, we also caution that there are differences in appropriate methodologies and applications that must jointly be considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

GHG Emissions Inventory Report for LvivTeploEnergo (LTE)

PNNL prepared the greenhouse gas (GHG) emissions inventory for LTE to help gain international funding for modernization requirements necessary to decarbonize LTE’s DH network. The inventory itself provides a comprehensive account of total greenhouse gas emissions from (a) LTE’s transportation (commuting and product transport), (b) purchased electricity (for water heating, heat production, and other uses), and (c) heat production for the DH network. The greenhouse gases analyzed in the inventory are Carbon Dioxide (CO 2 ), Carbon Monoxide (CO), and Nitrogen Oxide (NO x ). All data gathered for the inventory came directly from previous years of LTE data, with total emissions of each activity calculated by using emission factors from several internationally reputable sources (e.g., United National Framework Convention on Climate Change (UNFCCC), the ECLIPSE v6 dataset from the International Institute for Applied Systems Analysis (IIASA), the European Modeling and Evaluation Programme (EMEP), and the World Resources Institute (WRI)). This report further explains the methodology and justification for which scopes of emissions were included in the GHG emissions inventory spreadsheet and a description of references from which the emission factors were taken.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Creating Accurate Methane Emission Inventories through Data-Driven Airborne Survey Strategies: Methods and Results from the Haynesville, Anadarko, and Permian Basins

Significantly reducing methane emissions from the oil and gas sector can decrease the rate of climate change over the next two decades, buying critical time for a global energy transition. However, emissions inventories that can be used by oil and gas operators and environmental regulators to identify optimal methane emission mitigation strategies are either based on conservative emission factor methods, or are inconsistent between studies due to differences in sampling strategies or survey technologies. We developed a new approach for methane emissions survey design that yields representative basinwide methane emissions inventories by surveying a subset of total assets in a given oil and gas basin. We identify several sampling and analysis principles, including large sample sizes, balanced sampling across oil and gas production, careful survey area definition, and a unified protocol for analysis, to be vital to producing an unbiased estimate of basin-scale emissions that can be reconciled with future studies. We further present results from deploying this strategy in two oil and gas producing regions in the United States: the Haynesville Basin in Texas and Louisiana, and the Woodford Shale in the Anadarko Basin in Oklahoma. Aerial surveys were performed in 2023 using the Insight M LeakSurveyor™ technology. Preliminary results from methane emissions detected by Insight M indicate that aerially detected emissions above roughly 30 kg(CH4)/hr by themselves contribute a fractional loss rate of 1.13% of gross gas production across oil and gas operations in the Haynesville Basin, with aerially detected emissions equivalent to 2.67% of gross gas production in the Woodford Shale. We supplement these aerial estimates with modeled emissions that are below the LeakSurveyor’s survey sensitivity using a recently published inventory-based model of methane emissions, which we update for our survey areas. We then combine our aerial detections with modeled emissions to yield methane emission distributions and inventories that incorporate the full range of potential methane emissions from the smallest to the largest. These results can be used to identify the most effective methane mitigation strategies for our study areas, and can be reconciled with future methane emissions surveys that use different technologies.

Sherwin, Evan (ORCID:0000000321804297)↗
DOE OSTI2021

Closing the methane gap in US oil and natural gas production emissions inventories

Methane (CH 4 ) emissions from oil and natural gas (O&NG) systems are an important contributor to greenhouse gas emissions. In the United States, recent synthesis studies of field measurements of CH 4 emissions at different spatial scales are ~1.5–2× greater compared to official greenhouse gas inventory (GHGI) estimates, with the production-segment as the dominant contributor to this divergence. Based on an updated synthesis of measurements from component-level field studies, we develop a new inventory-based model for CH 4 emissions, for the production-segment only, that agrees within error with recent syntheses of site-level field studies and allows for isolation of equipment-level contributions. We find that unintentional emissions from liquid storage tanks and other equipment leaks are the largest contributors to divergence with the GHGI. If our proposed method were adopted in the United States and other jurisdictions, inventory estimates could better guide CH 4 mitigation policy priorities.

03 NATURAL GAS↗
DOE OSTI2021

Industrial emission inventories of iron and phosphorus for past, present and future

Global emission inventories of aerosol iron by species, and of phosphorus, were developed for inclusion in Earth system modeling that includes atmospheric transport. The time period covered was 1850-2010 to evaluate human influence. A variety of approaches to compare measured and modeled values of aerosol iron was synthesized to estimate how well anthropogenic emissions are known. Anthropogenic emissions are constrained within a factor of two and if there is a bias, it is an overestimation. The exception is shipping emissions, which may be underestimated. Direct radiative forcing by iron aerosol is small in the global average (0.02 W m -2 ) but reaches 0.25 W m -2 around source regions. Regions of high direct radiative forcing are poorly constrained by observations. The central value of change in oceanic net primary productivity due to iron deposition is about 0.26 PgC yr -1 , also highly localized. This leads to a decrease in atmospheric CO2 accumulation that corresponds to a forcing of 0.008 W m -2 since 1850 (0.003-0.18 W m -2 ). Emissions of particulate matter to 2050 were estimated in response to different policy scenarios, including the need for renewable energy installations under decarbonization scenarios. Under the business-as-usual scenario, the total metal demand is 195 Mt/yr in 2020, peaking at 270 Mt/yr in years 2040-2045; under the Rapid Decarbonization scenario, total metal demand is nearly doubled at its peak: 480 Mt/yr in year 2040. Primary particulate matter emissions attributable to processing metals for renewable energy are also amplified under rapid decarbonization, but total atmospheric emissions are much lower because of the shift away from combustion.

58 GEOSCIENCES↗
DOE OSTI2026

Developing Methane Emissions Inventories by Fusing Airborne, Satellite, and Modeled Assessments: Comprehensive Surveys of the Anadarko and Haynesville Basin

The objective of this program is to create basin-specific methane emissions inventories of the Haynesville and Anadarko (Woodford shale) basins, based on truly basin-scale data collection and analysis. Emissions of natural gas, predominantly composed of methane, present a significant financial loss to the oil and gas sector and reduce the competitiveness of American energy sources. While large emissions, above 10 kg/h, occur at only a small percentage of oil and gas sites, they account for a disproportionately large volume of emissions. To address this, we executed a concurrent campaign combining cutting-edge bottom-up modeling with top-down aerial and satellite surveys to capture the heavy-tailed distribution of these large emissions to accurately characterize total emissions throughout both regions.

03 NATURAL GAS↗
DOE OSTI2021

Site 300 (Facility ID N-472) Toxic Emissions Inventory Plan

The Air Toxics "Hot Spots" Information and Assessment Act (AB 2588 or the “Act”) was enacted in September 1987. Under the Act, stationary sources are required to report the types and quantities of certain toxic substances their facilities routinely release into the air. AB 2588 is designed to provide information to state and local agencies and to the general public on the extent of airborne emissions from stationary sources and the potential public health impacts of those emissions. The San Joaquin Valley Air Pollution Control District (the District) is mandated by the State to implement AB 2588. On March 6, 2015, The State Office of Environmental Health Hazard Assessment (OEHHA) adopted changes to the Air Toxics Hot Spots Program Guidance Manual for the Preparation of Health Risk Assessments. These revisions were designed to incorporate three technical support documents and to provide enhanced protection of children as required under state law (SB 25, Escutia, 1999). Due to these recent changes, and the corresponding potential increases in calculated health risk, the District notified LAWRENCE LIVERMORE NATL SECURITY, LLC that we must be re-evaluated under AB 2588. Pursuant to the Air Toxics "Hot Spots" Information and Assessment Act of 1987, we have prepared a comprehensive, site-specific Toxics Emissions Inventory Plan. The plan specifies in detail how LAWRENCE LIVERMORE NATL SECURITY, LLC will inventory our facility's emissions of all toxic substances on the list of substances subject to the Act. The plan provides a comprehensive and detailed description of the methods that will be used to quantify air releases or potential air releases of listed substances from all points of release. The plan also includes quantification methods which result in accurate and comprehensive characterization of releases and comply with all applicable requirements of the “Hot Spots” regulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Lawrence Livermore National Security, LLCSite 300: Toxic Emissions Inventory Plan for ABA 2588 California Air Toxics "Hot Spots" Information and Assessment Act of 1987 (Revision 3.0)

The Air Toxics "Hot Spots" Information and Assessment Act (AB 2588 or the “Act”) was enacted in September 1987. Under the Act, stationary sources are required to report the types and quantities of certain toxic substances their facilities routinely release into the air. AB 2588 is designed to provide information to state and local agencies and to the general public on the extent of airborne emissions from stationary sources and the potential public health impacts of those emissions. The San Joaquin Valley Air Pollution Control District (the District) is mandated by the State to implement AB 2588. On March 6, 2015, The State Office of Environmental Health Hazard Assessment (OEHHA) adopted changes to the Air Toxics Hot Spots Program Guidance Manual for the Preparation of Health Risk Assessments. These revisions were designed to incorporate three technical support documents and to provide enhanced protection of children as required under state law (SB 25, Escutia, 1999). Due to these recent changes, and the corresponding potential increases in calculated health risk, the District notified LAWRENCE LIVERMORE NATIONAL SECURITY, LLC that we must be re-evaluated under AB 2588. Pursuant to the Air Toxics "Hot Spots" Information and Assessment Act of 1987, we have prepared a comprehensive, site-specific Toxics Emissions Inventory Plan. The plan specifies in detail how LAWRENCE LIVERMORE NATIONAL SECURITY, LLC will inventory our facility's emissions of all toxic substances on the list of substances subject to the Act. The plan provides a comprehensive and detailed description of the methods that will be used to quantify air releases or potential air releases of listed substances from all points of release. The plan also includes quantification methods which result in accurate and comprehensive characterization of releases and comply with all applicable requirements of the “Hot Spots” regulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Generating Emissions Inventory for Carbon Capture and Storage Analysis for Carbon-Intensive Industrial Sectors

Decarbonizing the industrial sector is critical to achieve carbon dioxide (CO2) emissions reductions goals of the Biden Administration. Currently available decarbonization options include electrification, fuel switching to zero carbon fuels like green hydrogen (H2) and carbon capture and storage (CCS). Application of post-combustion carbon capture (PCCC) technology in the power sector, as well as research at the U.S. Department of Energy's Fossil Energy and Carbon Management (FECM) Office has shown that its application in the industrial sector could have co-benefits in the form of emissions reductions of non-CO2 regulated pollutants. For example, solvent based PCCC systems require pre-conditioning of flue gas to remove sulfur and particulate matter (PM) upstream of the CO2 absorber. However, there is a lack of understanding about the type of non-CO2 pollutants which can be captured and the amount of reduction possible. PCCC application differs across industrial sectors as it depends on the availability of decarbonization options, characteristics of industrial processes and the amount and composition of pollutant flows. Certain facilities can also have multiple effluent flows with or without a CO2 stream. As such, understanding industrial processes and their effluent flows in detail is required to quantify the co-benefits opportunities presented by PCCC. Considering this requirement, the goal of this analysis is to develop a high-resolution inventory of effluent flows from facilities of 8 industrial sectors in the U.S. These industrial sectors - ethanol, ammonia, cement, steel, natural gas processing, hydrogen, petroleum refining and wood and pulp products - have carbon-intensive effluent flows, and thus are prime candidates for PCCC applications. In this study, we map the composition of pollutant flow from flue stacks across the identified facilities. Using data available in three Environmental Protection Agency (EPA) databases - the Green House Gas Reporting Program (GHGRP), the National Emissions Inventory (NEI) and the Toxic Release Inventory (TRI), we create a combined inventory which lists the type, amount, and concentration of pollutant flows. Using total weight of the pollutant flow back calculated from observed data for CO2 concentrations in flue gas for individual sectors, we calculate the concentration of each pollutant in the flue gas stream. Thus, the resultant emissions inventory includes the following details for each facility in the sector: facility-level and if possible, process-level pollutant flows, concentrations of pollutants in the flue gas, and geographical coordinates of the facilities. A detailed statistical analysis and summary allows us to search for erroneous data and remove them from the final inventory. The generation of the inventory is achieved using a python-based framework which can recreate this inventory for other industrial sectors as well as using newer releases of emission inventories from EPA. The statistical analysis performed on the inventory is also calibrated and automated to identify outliers efficiently.

air pollutants↗
DOE OSTI2025

Enhancing fire emissions inventories for acute health effects studies: integrating high spatial and temporal resolution data

Daily fire progression information is crucial for public health studies that examine the relationship between population-level smoke exposures and subsequent health events. Issues with remote sensing used in fire emissions inventories (FEI) lead to the possibility of missed exposures that impact the results of acute health effects studies. This paper provides a method for improving an FEI dataset with readily available information to create a more robust dataset with daily fire progression. High temporal and spatial resolution burned area information from two FEI products are combined into a single dataset, and a linear regression model fills gaps in daily fire progression. The combined dataset provides up to 71% more PM 2.5 emissions, 69% more burned area, and 367% more fire days per year than using a single source of burned area information. The FEI combination method results in improved FEI information with no gaps in daily fire emissions estimates. The combined dataset provides a functional improvement to FEI data that can be achieved with currently available data.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2021

Emission Inventories from Natural Gas Storage Facilities using Regional Frequency Comb Laser Monitoring and Aircraft Flyovers. Final Report

The project centers around a ground-based regional methane sensor developed by the CU/NIST team members under the DOE ARPA-E MONITOR program, and sophisticated aircraft measurement techniques developed by the UCD/Scientific Aviation team (responsible for a recent Science publication quantifying the Aliso Canyon storage field release). The dual frequency-comb spectrometer is an invisible, eye-safe laser capable of measuring atmospheric methane concentrations along beam paths 1+ miles in length with high precision and stability (<1 ppb methane over 1 mile). The CU/NIST team has developed a unique approach to using a single, central spectrometer to locate and size methane emissions as small as 6 scfh from specific gas field structures within the 1+ mile range of the laser. Deployment involves the stationing of small cubic mirrors at strategic locations across the gas storage site. The mirrors direct light from the spectrometer back to a detector, where methane concentrations are recorded based on light absorption at specific wavelengths. The measurements are coupled with high resolution gas transport models based on meteorological measurements (wind, etc.) to determine the precise location and emission rate of methane sources. The calibration-free and continuous nature of dual frequency-comb spectrometer measurements means that a large area can be monitored continuously for temporal variability of emissions over long periods of time. The aircraft measurements involve spiral flights around storage facilities with a sensitive ethane/methane measurement package. Upwind/downwind concentration comparisons and wind data provide total facility emissions data. During this project, a new micrometeorological package was integrated onto the Scientific Aviation aircraft to provide even greater emissions quantification capability. In this project, the ground-based measurement system was deployed for 11 months (to capture seasonal variability) at a West Coast storage facility, together with a campaign of twice monthly aircraft total facility emissions flights. The data from these two modalities was combined to quantify the methane emissions from the facility with first-of-its-kind temporal and spatial detail. Concurrent with this deployment, the aircraft team performed flights to quantify emissions at a wider array of previously un-surveyed storage sites. The ground-based measurement system was then moved to an additional site of differing total storage and delivery capacity. Aircraft mass balance flights continued, repeatedly surveying (twice monthly) this site, as well as surveying a large number of previously un-assessed sites spanning a variety of size, reservoir type and age. Assessment of ground-based, temporally and spatially detailed methane emissions information alongside aircraft-derived methane total facility emissions information led to an improved understanding of emissions, relevant for inventories of the natural gas storage sector. In particular, this work provided temporal detail (seasonal of emissions and frequency of leaks) to stakeholders and personnel responsible for updates to the EPA’s GHGI. The impact of the proposed work has been a dramatic improvement in the temporal, spatial, and site- and type- specific detail and quantification of emissions inventories for the natural gas storage sector. This work directly benefits the EPA’s GHGI, directly ameliorates the environmental impacts and public health and safety of the natural gas storage sector, and aids policymakers and industry to make sound choices with respect to management and regulation.

03 NATURAL GAS↗
DOE OSTI2020

A Mineralogy–Based Anthropogenic Combustion–Iron Emission Inventory

Atmospheric supply of iron can modulate ocean biogeochemistry, due to its key role in global nitrogen and carbon cycles. Current estimates predict up to 20% of global ocean net primary productivity depends on an atmospheric iron source. Using a technology–based methodology, we revise total and soluble anthropogenic iron emissions and resolve iron into its mineral components, which allows modeling mineral–specific atmospheric reactions. We compare different methodologies for representing anthropogenic iron solubility: measured in mild and strong leaches and estimated using a mineralogy basis and identify the emissions that are most affected by such assumptions. The inclusion of metal smelting as an iron source increases iron emissions by up to 10 times higher in the fine aerosol fraction (smaller than 1 μm) than most previous inventories. Different solubility assumptions alter anthropogenic soluble iron emissions and deposition by a factor of 20 and 10, respectively. Using solubilities measured in mild leaches and calculated by mineralogy give 20–30 Gg/yr anthropogenic emissions and 40–50 Gg/yr deposition, while those measured in strong leaches give 80–440 Gg/yr emissions and 200–450 Gg/yr deposition. Here, this range of anthropogenic soluble iron deposition leads to global soluble iron deposition of 1,900–2,300 Gg/yr when dust, wildfires, and atmospheric processing are included, indicating such assumptions can affect global soluble iron supply by about 30%. In regions where marine primary productivity is iron limited, anthropogenic combustion–iron contributes up to half of the atmospheric soluble iron flux to the North Pacific Ocean but supplies less than 5% to the Southern Ocean.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Development of a mineralogy-based anthropogenic combustion-iron emission inventory

Atmospheric supply of iron can modulate ocean biogeochemistry, due to its key role in global nitrogen and carbon cycles. Using a detailed technology-based methodology we revise total and soluble anthropogenic iron emissions and resolve iron into its mineral components, which allows modeling mineral-specific atmospheric reactions. The inclusion of metal smelting as an iron source, increases fine iron aerosol emissions (smaller than 1 µm) compared with most previous inventories. Different assumptions about solubility lead to estimates of 40-450 Gg/year deposition of soluble anthropogenic iron. When combined with dust and wildfires, the global total anthropogenic soluble iron deposition is 1900-2300 Gg/yr, so assumptions in anthropogenic inventories can affect estimates of global soluble iron supply by about 30%. In regions where marine primary productivity is iron-limited, anthropogenic combustion-iron contributes up to half of the atmospheric soluble iron flux to North Pacific Ocean.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Biomass burning emission analysis based on MODIS aerosol optical depth and AeroCom multi-model simulations: implications for model constraints and emission inventories

We assessed the biomass burning (BB) smoke aerosol optical depth (AOD) simulations of 11 global models that participated in the AeroCom phase III BB emission experiment. By comparing multi-model simulations and satellite observations in the vicinity of fires over 13 regions globally, we (1) assess model-simulated BB AOD performance as an indication of smoke source–strength, (2) identify regions where the common emission dataset used by the models might underestimate or overestimate smoke sources, and (3) assess model diversity and identify underlying causes as much as possible. Using satellite-derived AOD snapshots to constrain source strength works best where BB smoke from active sources dominates background non-BB aerosol, such as in boreal forest regions and over South America and southern hemispheric Africa. The comparison is inconclusive where the total AOD is low, as in many agricultural burning areas, and where the background is high, such as parts of India and China. Many inter-model BB AOD differences can be traced to differences in values for the mass ratio of organic aerosol to organic carbon, the BB aerosol mass extinction efficiency, and the aerosol loss rate from each model. The results point to a need for increased numbers of available BB cases for study in some regions and especially to a need for more extensive regional-to-global-scale measurements of aerosol loss rates and of detailed particle microphysical and optical properties; this would both better constrain models and help distinguish BB from other aerosol types in satellite retrievals. More generally, there is the need for additional efforts at constraining aerosol source strength and other model attributes with multi-platform observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Lawrence Livermore National Security, LLC Site 300 Facility ID N-472 Toxics Emissions Inventory Plan for AB 2588 California Air Toxics "Hot Spots" Information and Assessment Act of 1987

The Air Toxics "Hot Spots" Information and Assessment Act (AB 2588 or the “Act”) was enacted in September 1987. Under the Act, stationary sources are required to report the types and quantities of certain toxic substances their facilities routinely release into the air. AB 2588 is designed to provide information to state and local agencies and to the general public on the extent of airborne emissions from stationary sources and the potential public health impacts of those emissions. The San Joaquin Valley Air Pollution Control District (the District) is mandated by the State to implement AB 2588.

54 ENVIRONMENTAL SCIENCES↗