SEARCH · Search NASA

Results for “emulators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS2017

Emulation of Condensed Fuel Flames Using a Burning Rate Emulator (BRE) in Microgravity

The Burning Rate Emulator (BRE) is a gaseous fuel burner developed to emulate the burning of condensed phase fuels. The current study details several tests at the NASA Glenn 5-s drop facility to test the BRE technique in microgravity conditions. The tests are conducted for two burner diameters, 25 mm and 50 mm respectively, with methane and ethylene as the fuels. The ambient pressure, oxygen content and fuel flow rate are additional parameters. The microgravity results exhibit a nominally hemispherical flame with decelerating growth and quasi-steady heat flux after about 5 seconds. The BRE burner was evaluated with a transient analysis to assess the extent of steady-state achieved. The burning rate and flame height recorded at the end of the drop are correlated using two steady-state purely diffusive models. A higher burning rate for the bigger burner as compared to theory indicates the significance of gas radiation. The effect of the ambient pressure and oxygen concentration on the heat of gasification are also examined.

flames↗

NASA NTRS2004

Space Communications Emulation Facility

Establishing space communication between ground facilities and other satellites is a painstaking task that requires many precise calculations dealing with relay time, atmospheric conditions, and satellite positions, to name a few. The Space Communications Emulation Facility (SCEF) team here at NASA is developing a facility that will approximately emulate the conditions in space that impact space communication. The emulation facility is comprised of a 32 node distributed cluster of computers; each node representing a satellite or ground station. The objective of the satellites is to observe the topography of the Earth (water, vegetation, land, and ice) and relay this information back to the ground stations. Software originally designed by the University of Kansas, labeled the Emulation Manager, controls the interaction of the satellites and ground stations, as well as handling the recording of data. The Emulation Manager is installed on a Linux Operating System, employing both Java and C++ programming codes. The emulation scenarios are written in extensible Markup Language, XML. XML documents are designed to store, carry, and exchange data. With XML documents data can be exchanged between incompatible systems, which makes it ideal for this project because Linux, MAC and Windows Operating Systems are all used. Unfortunately, XML documents cannot display data like HTML documents. Therefore, the SCEF team uses XML Schema Definition (XSD) or just schema to describe the structure of an XML document. Schemas are very important because they have the capability to validate the correctness of data, define restrictions on data, define data formats, and convert data between different data types, among other things. At this time, in order for the Emulation Manager to open and run an XML emulation scenario file, the user must first establish a link between the schema file and the directory under which the XML scenario files are saved. This procedure takes place on the command line on the Linux Operating System. Once this link has been established the Emulation manager validates all the XML files in that directory against the schema file, before the actual scenario is run. Using some very sophisticated commercial software called the Satellite Tool Kit (STK) installed on the Linux box, the Emulation Manager is able to display the data and graphics generated by the execution of a XML emulation scenario file. The Emulation Manager software is written in JAVA programming code. Since the SCEF project is in the developmental stage, the source code for this type of software is being modified to better fit the requirements of the SCEF project. Some parameters for the emulation are hard coded, set at fixed values. Members of the SCEF team are altering the code to allow the user to choose the values of these hard coded parameters by inserting a toolbar onto the preexisting GUI.

Hill, Chante A.↗

DOE OSTI2025

Emulation With Uncertainty Quantification of Regional Sea‐Level Change Caused by the Antarctic Ice Sheet

Abstract Projecting regional sea‐level change under various climate‐change scenarios typically involves running forward simulations of the Earth's gravitational, rotational and deformational (GRD) response to ice‐mass change, which requires substantial computational cost if applied to probabilistic frameworks requiring thousands to millions of samples. Here we build emulators of regional sea‐level change at 27 coastal locations, due to the GRD effects associated with future Antarctic Ice Sheet mass change over the 21st century. The emulators are evaluated against a numerical sea‐level model applied to an ensemble of ice‐sheet model simulations of the Antarctic Ice Sheet through 2100. We build a physics‐based emulator using a recent sensitivity kernel approach and compare it to machine learning based emulators (neural network and conditional variational autoencoder methods). In order to quantify uncertainty, we derive well‐calibrated prediction intervals for regional sea‐level change via split‐conformal inference and linear regression, and show that Monte Carlo dropout does not yield well‐calibrated uncertainties in this instance. We also demonstrate substantial gains in computational efficiency using both the physics‐based emulator and neural networks in comparison to the numerical model for the complete regional sea‐level solution. Overall, we find the physics‐based emulator modestly outperforms the machine learning emulators for this problem.

58 GEOSCIENCES↗

DOE OSTI2025

Computationally efficient subglacial drainage modelling using Gaussian process emulators: GlaDS-GP v1.0

Subglacial drainage models represent water flow at the ice–bed interface through coupled distributed and channelized systems to determine water pressure, discharge, and drainage system geometry. While they are used to understand processes such as the relationship between surface melt and ice flow, the number of uncertain model parameters and the computational cost of running models makes it difficult to adequately explore the high-dimensional parameter space and evaluate uncertainty in model predictions. Here, we develop Gaussian process (GP) emulators that make fast predictions with associated uncertainty of subglacial drainage model outputs. Using a truncated principal component (PC) basis representation, we construct a GP emulator for diurnally averaged subglacial water pressure. We also explore emulation of scalar variables describing drainage efficiency and configuration. We train the emulators using ensembles of up to 512 simulations varying eight parameters of the Glacier Drainage System (GlaDS) model on a synthetic domain intended to represent an ice-sheet margin. The emulators make predictions ∼ 1000 times faster than GlaDS simulations, with errors <3 % for the water pressure field and ∼ 5 %–9 % for drainage efficiency and configuration. We apply the emulators to explore the eight-dimensional parameter space by computing variance-based parameter sensitivity indices, finding that three parameters (ice flow coefficient, bed bump aspect ratio, and the subglacial cavity system conductivity) explain 90 % of the variance in modelled water pressure in response to parameter changes. The GP emulator approach described here is well suited to integrating observational data with models to make calibrated, credible predictions of subglacial drainage.

58 GEOSCIENCES↗

NASA NTRS2020

The GGCMI Phase 2 emulators: global gridded crop model responses to changes in CO2, temperature, water, and nitrogen (version 1.0)

Statistical emulation allows combining advantageous features of statistical and process-based crop models for understanding the effects of future climate changes on crop yields. We describe here the development of emulators for nine process-based crop models and five crops using output from the Global Gridded Model Intercomparison Project (GGCMI) Phase 2. The GGCMI Phase 2 experiment is designed with the explicit goal of producing a structured training dataset for emulator development that samples across four dimensions relevant to crop yields: atmospheric carbon dioxide (CO2) concentrations, temperature, water supply, and nitrogen inputs (CTWN). Simulations are run under two different adaptation assumptions: that growing seasons shorten in warmer climates, and that cultivar choice allows growing seasons to remain fixed. The dataset allows emulating the climatological-mean yield response of all models with a simple polynomial in mean growing-season values. Climatological-mean yields are a central metric in climate change impact analysis; we show here that they can be captured without relying on interannual variations. In general, emulation errors are negligible relative to differences across crop models or even across climate model scenarios; errors become significant only in some marginal lands where crops are not currently grown. We demonstrate that the resulting GGCMI emulators can reproduce yields under realistic future climate simulations, even though the GGCMI Phase 2 dataset is constructed with uniform CTWN offsets, suggesting that the effects of changes in temperature and precipitation distributions are small relative to those of changing means. The resulting emulators therefore capture relevant crop model responses in a lightweight, computationally tractable form, providing a tool that can facilitate model comparison, diagnosis of interacting factors affecting yields, and integrated assessment of climate impacts.

James A Franke↗

DOE OSTI2025

Non-Hermitian quantum mechanics approach for extracting and emulating continuum physics based on bound-state-like calculations: Detailed description

Here, this work applies a reduced basis method to study the continuum physics of a finite quantum system—either few or many-body. Specifically, I develop reduced-order models, or emulators, for the underlying inhomogeneous Schrödinger equation and train the emulators against the equation's bound-state-like solutions at complex energies. The emulators rapidly and accurately interpolate and extrapolate the matrix elements of the Hamiltonian resolvent operator (Green's function) across a parameter space that includes both complex energy and other real-valued physical inputs in the Schrödinger equation. The spectra, discretized and compressed as the result of emulation, and the associated resolvent matrix elements (or amplitudes), have the defining characteristics of non-Hermitian quantum mechanics calculations, featuring complex eigenenergies with negative imaginary parts and branch cuts moved below the real axis in the complex energy plane. Therefore, one now has a method that extracts continuum physics from bound-state-like calculations and emulates those extractions in the input parameter space. Building on a prior Letter [Zhang, Phys. Rev. Lett. 135, 242501 (2025)], this article provides the full theoretical details, a comprehensive analysis of the method's performance, and a brief discussion of how it can be coupled with existing continuum approaches to perform emulations in their input parameter spaces.

ab initio calculations↗

DOE OSTI2026

Active learning emulators for nuclear two-body scattering in momentum space

In this work we extend the active learning emulators for two-body scattering in coordinate space with error estimation, recently developed by Maldonado et al. [Phys. Rev. C 112, 024002], to coupled-channel scattering in momentum space. Our full-order model (FOM) solver is based on the Lippmann-Schwinger integral equation for the scattering t-matrix as opposed to the radial Schrödinger equation. We use (Petrov-)Galerkin projections and high-fidelity calculations at a few snapshots across the parameter space of the interaction to construct efficient reduced-order models (ROMs), trained by a greedy algorithm for locally optimal snapshot selection. Both the FOM solver and the corresponding ROMs are implemented efficiently in Python using Google's JAX library. We present results for emulating scattering phase shifts in coupled and uncoupled channels and cross sections, and assess the accuracy of the developed ROMs and their computational speedup factors. We also develop emulator error estimation for both the t-matrix and the total cross section. The software framework for reproducing and extending our results is publicly available. Together with our recent advances in developing active-learning emulators for three-body scattering, these emulator frameworks set the stage for full Bayesian calibrations of chiral nuclear interactions and optical models against scattering data with quantified emulator errors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

IoT Firmware Emulation and Its Security Application in Fuzzing: A Critical Revisit

As IoT devices with microcontroller (MCU)-based firmware become more common in our lives, memory corruption vulnerabilities in their firmware are increasingly targeted by adversaries. Fuzzing is a powerful method for detecting these vulnerabilities, but it poses unique challenges when applied to IoT devices. Direct fuzzing on these devices is inefficient, and recent efforts have shifted towards creating emulation environments for dynamic firmware testing. However, unlike traditional software, firmware interactions with peripherals that are significantly more diverse presents new challenges for achieving scalable full-system emulation and effective fuzzing. This paper reviews 27 state-of-the-art works in MCU-based firmware emulation and its applications in fuzzing. Instead of classifying existing techniques based on their capabilities and features, we first identify the fundamental challenges faced by firmware emulation and fuzzing. We then revisit recent studies, organizing them according to the specific challenges they address, and discussing how each specific challenge is addressed. We compare the emulation fidelity and bug detection capabilities of various techniques to clearly demonstrate their strengths and weaknesses, aiding users in selecting or combining tools to meet their needs. Finally, we highlight the remaining technical gaps and point out important future research directions in firmware emulation and fuzzing.

Zhou, Wei (ORCID:0000000178340839)↗

NASA NTRS2004

User-Friendly Interface Developed for a Web-Based Service for SpaceCAL Emulations

A team at the NASA Glenn Research Center is developing a Space Communications Architecture Laboratory (SpaceCAL) for protocol development activities for coordinated satellite missions. SpaceCAL will provide a multiuser, distributed system to emulate space-based Internet architectures, backbone networks, formation clusters, and constellations. As part of a new effort in 2003, building blocks are being defined for an open distributed system to make the satellite emulation test bed accessible through an Internet connection. The first step in creating a Web-based service to control the emulation remotely is providing a user-friendly interface for encoding the data into a well-formed and complete Extensible Markup Language (XML) document. XML provides coding that allows data to be transferred between dissimilar systems. Scenario specifications include control parameters, network routes, interface bandwidths, delay, and bit error rate. Specifications for all satellite, instruments, and ground stations in a given scenario are also included in the XML document. For the SpaceCAL emulation, the XML document can be created using XForms, a Webbased forms language for data collection. Contrary to older forms technology, the interactive user interface makes the science prevalent, not the data representation. Required versus optional input fields, default values, automatic calculations, data validation, and reuse will help researchers quickly and accurately define missions. XForms can apply any XML schema defined for the test mission to validate data before forwarding it to the emulation facility. New instrument definitions, facilities, and mission types can be added to the existing schema. The first prototype user interface incorporates components for interactive input and form processing. Internet address, data rate, and the location of the facility are implemented with basic form controls with default values provided for convenience and efficiency using basic XForms operations. Because different emulation scenarios will vary widely in their component structure, more complex operations are used to add and delete facilities.

Liszka, Kathy J.↗

DOE OSTI2025

Emulation of radiation transport in 3D stochastic media using 1D planar Monte Carlo stochastic media radiation transport algorithms

A subset of stochastic media radiation transport problems involves those in which radiation is incident on a thin slab of stochastic material. Particle tracking in 3D for such problems is expensive, and 1D planar models lack accuracy because they only allow the material to change in one dimension. Therefore, we propose dimensional emulation, which through a slight modification allows existing 1D planar geometry stochastic media radiation transport models to reproduce results from the equivalent 3D models by allowing the material to change in all three dimensions, reproducing the fidelity of the 3D model for the low computational cost of the 1D planar model. In this work, we apply dimensional emulation to three Monte Carlo stochastic media radiation transport models: Chord Length Sampling (CLS), the Local Realization Preserving method (LRP), and a variant of Conditional Point Sampling (CoPS). For a common Markovian benchmark set, the 3D emulation variants of these algorithms are numerically verified to reproduce the results of the 3D variants within statistics while running 1.3 to 2 times faster in the implementation within Sandia National Laboratories open-source research code PlaybookMC. The 3D emulation variants are also shown to yield a 72%–92% reduction in error for the thin slab problems in comparison to the 1D benchmark. As a result, the 3D emulation variant of CLS and CoPS-1 are shown to reproduce 3D CLS results that were used to approximate results for a 3D spherical inclusion geometry benchmark set.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2026

EXERGETIC: De-Risking Next-Generation Resilient Geothermal Hybrids via At-Scale Evaluation Using Virtual Emulation Digital Twin Environment for Efficient Operation

The DOE-GTO-funded project, award number 5.1.2.12, entitled "EXERGETIC - De-risking Next Generation Resilient Geothermal Hybrids via at-Scale Evaluation Using a Virtual Emulation Digital Twin Environment for Efficient Operation," advances the solution to these challenges by developing and validating a geothermal co-emulation environment implemented at the National Laboratory of the Rockies (NLR)'s Advanced Research on Integrated Energy Systems (ARIES) platform. This framework enables the de-risking of next-generation geothermal and geothermal hybrid systems through high-fidelity modeling, real-time digital emulation, advanced control strategies, and techno-economic assessment. The project focused on geothermal hybrid configurations that integrate geothermal power plants with concentrated solar power and underground thermal energy storage, enabling enhanced efficiency, flexibility, and grid support capabilities. The main goal of this project was the development of a geothermal digital co-emulation environment to demonstrate the technical and economic value of geothermal hybrid systems and their contribution to grid stability and flexibility. The EXERGETIC framework combined physics-based models, controls, and real assets at ARIES, including digital real-time simulators (DRTS), a 20-MW-scale controllable grid interface (CGI), and a 2-MW conventional generator. Detailed transient models were developed for the key subsystems of a hybrid geothermal plant, including parabolic trough solar collectors, reservoir thermal energy storage (RTES), and a binary Organic Rankine Cycle (ORC) power plant. The ORC model explicitly captured thermal inertia and off-design operation and integrated control strategies to dynamically respond to electric load profiles. The models were validated against published experimental and numerical studies, demonstrating strong agreement and confirming the accuracy and robustness of the modeling approach. The resulting digital twin represents geothermal-solar-storage systems at multiple scales (1 MW to 100 MW) and enables realistic emulation of grid-connected operation. The control architecture allows the geothermal resource to provide stable baseload generation, while solar and stored thermal energy supply flexible, dispatchable support during periods of high demand or variable grid conditions. A key contribution of the EXERGETIC project is the demonstration that geothermal hybrid systems can be designed to be active grid assets rather than passive baseload generators. Using the ARIES platform, the digital twin was evaluated under multiple grid scenarios, including load following, voltage support at the distribution level, and frequency response at the transmission level. Results show that hybrid geothermal systems can respond effectively to dynamic grid conditions, providing inertia-like behavior, primary frequency support, and voltage regulation through coordinated control. In addition to the performance and grid services capability analysis of geothermal and hybrid geothermal systems, the EXERGETIC project also focused on scalability and techno-economic analysis of geothermal hybrid plants. In particular, for the scalability analysis, machine-learning (ML)-based surrogate models were trained using data generated from the geothermal digital twin under different grid-connected scenarios and plant capacities. These ML models demonstrated strong interpolation and extrapolation capabilities across plant sizes, accurately reproducing both steady-state and transient responses with very low errors. Regarding the techno-economic analysis, plant performance results were integrated with cost models for hybrid geothermal systems, and the levelized cost of electricity (LCOE) was used as the main economic metric to evaluate system performance across a range of system capacities, solar shares, solar multiples, and storage durations. Results indicate that economies of scale significantly reduce geothermal LCOE as plant capacity increases, with large-scale systems (25-100 MW) achieving substantially lower costs than small plants. Hybridization with solar thermal energy and storage further improves economic performance by increasing capacity utilization and enabling flexible dispatch. In addition, thermal storage plays a critical role in reducing LCOE by maximizing geothermal, solar, and stored energy resources. In summary, the results from this project demonstrate that geothermal hybrid systems represent a promising alternative for increasing the energy conversion efficiency of geothermal technologies, contributing to the preservation of geothermal resources, and supporting the transition of geothermal plants from traditional baseload resources into flexible, resilient, and cost-competitive energy conversion technologies.

15 GEOTHERMAL ENERGY↗

DOE OSTI2025

Emulation of the calculations of final r -process abundance patterns with a neural network

This work explores the construction of a fast emulator for the calculation of the final pattern of nucleosynthesis in the rapid neutron capture process (the r-process). An emulator is built using a feed-forward artificial neural network (ANN). We train the ANN with nuclear data and relative abundance patterns. We take as input the β-decay half-lives and the one-neutron separation energy of the nuclei in the rare-earth region. The output is the final isotopic abundance pattern. In this work, we focus on the nuclear data and abundance patterns in the rare-earth region to reduce the dimension of the input and output space. We show that the ANN can capture the effect of the changes in the nuclear physics inputs on the final r-process abundance pattern in the adopted astrophysical conditions. We employ the deep ensemble method to quantify the prediction uncertainty of the neural network emulator. The emulator achieves a speed-up by a factor of about 20 000 in obtaining a final abundance pattern in the rare-earth region. The emulator may be utilized in statistical analyses such as uncertainty quantification, inverse problems, and sensitivity analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Non-Hermitian Quantum Mechanics Approach for Extracting and Emulating Continuum Physics Based on Bound-State-like Calculations

Here, this Letter introduces a unified emulation framework for studying continuum physics in finite quantum systems. Using a reduced basis method, we construct powerful emulators for the inhomogeneous Schrödinger equation that operate in a combined parameter space of complex energy (𝐸) and other inputs (𝜽). Within the space, the emulators simultaneously perform analytical continuation in 𝐸—extracting continuum physics from numerically simpler bound-state-like calculations—and interpolate this entire process across 𝜽. This yields a small, non-Hermitian system whose properties (e.g., resonances and scattering observables) can be rapidly predicted for any 𝜽. Crucially, the complex-𝐸 emulation provides a pathway to compute continuum observables for complex systems where advanced bound-state methods exist but direct continuum calculations are yet to be developed, while the 𝜽 emulation enables rapid parameter-space exploration and can be adapted to accelerate other existing continuum calculations. Demonstrations with two- and three-body systems highlight the method’s effectiveness and suggest its connection to (near-)optimal rational approximation. This Letter presents the key results, with further details reserved for a companion paper.

ab initio calculations↗

DOE OSTI2025

Greedy emulators for nuclear two-body scattering

Applications of reduced basis method emulators are increasing in low-energy nuclear physics because they enable fast and accurate sampling of high-fidelity calculations, enabling robust uncertainty quantification. Here, in this paper, we develop, implement, and test two model-driven emulators based on the (Petrov-)Galerkin projection using the prototypical test case of two-body scattering with the Minnesota potential and a more realistic local chiral potential. The high-fidelity scattering equations are solved with the matrix Numerov method, a reformulation of the popular Numerov recurrence relation for solving special second-order differential equations as a linear system of coupled equations. A novel error estimator based on reduced-space residuals is applied to an active learning approach (a greedy algorithm) to choosing training samples (“snapshots”) for the emulator and contrasted with a proper orthogonal decomposition (POD) approach. Both approaches allow for computationally efficient offline-online decompositions, but the greedy approach requires many fewer snapshot calculations. These developments set the groundwork for emulating scattering observables based on chiral nucleon-nucleon and three-nucleon interactions and optical models, where computational speed-ups are necessary for Bayesian uncertainty quantification. Our emulators and error estimators are widely applicable to linear systems.

Bayesian methods↗

DOE OSTI2024

Neural network based emulation of galaxy power spectrum covariances: A reanalysis of BOSS DR12 data

We train neural networks to quickly generate redshift-space galaxy power spectrum covariances from a given parameter set (cosmology and galaxy bias). This covariance emulator utilizes a combination of traditional fully connected network layers and transformer architecture to accurately predict covariance matrices for the high redshift, north galactic cap sample of the BOSS DR12 galaxy catalog. We run simulated likelihood analyses with emulated and brute-force computed covariances, and we quantify the network’s performance via two different metrics: (1) difference in Χ 2 and (2) likelihood contours for simulated BOSS DR 12 analyses. We find that the emulator returns excellent results over a large parameter range. We then use our emulator to perform a reanalysis of the BOSS HighZ NGC galaxy power spectrum, and find that varying covariance with cosmology along with the model vector produces Ω m = $0.27⁢6$$^{+0.013}_{–0.015}$, H 0 = 70.2 ± 1.9 km/s/Mpc, and σ 8 = $0.67⁢4$$^{+0.058}_{–0.077}$. These constraints represent an average 0.46⁢σ shift in best-fit values and a 5% increase in constraining power compared to fixing the covariance matrix (Ω m = 0.293 ± 0.017, H 0 = 70.3 ± 2.0 km/s/Mpc, σ 8 = $0.70⁢2$$^{+0.063}_{–0.075}$). As a result, this work demonstrates that emulators for more complex cosmological quantities than second-order statistics can be trained over a wide parameter range at sufficiently high accuracy to be implemented in realistic likelihood analyses.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1987

Diagnostic emulation: Implementation and user's guide

The Diagnostic Emulation Technique was developed within the System Validation Methods Branch as a part of the development of methods for the analysis of the reliability of highly reliable, fault tolerant digital avionics systems. This is a general technique which allows for the emulation of a digital hardware system. The technique is general in the sense that it is completely independent of the particular target hardware which is being emulated. Parts of the system are described and emulated at the logic or gate level, while other parts of the system are described and emulated at the functional level. This algorithm allows for the insertion of faults into the system, and for the observation of the response of the system to these faults. This allows for controlled and accelerated testing of system reaction to hardware failures in the target machine. This document describes in detail how the algorithm was implemented at NASA Langley Research Center and gives instructions for using the system.

Becher, Bernice↗

NASA NTRS1987

A Prolog Emulator

This note describes an efficient software emulator for the Warren Abstract Machine (WAM) Prolog architecture. The version of the WAM implemented is called Lcode. The Lcode emulator, written in C, executes the 'naive reverse' benchmark at 3900 LIPS. The emulator is one of a set of tools used to measure the memory-referencing characteristics and performance of Prolog programs. These tools include a compiler, assembler, and memory simulators. An overview of the Lcode architecture is given here, followed by a description and listing of the emulator code implementing each Lcode instruction. This note will be of special interest to those studying the WAM and its performance characteristics. In general, this note will be of interest to those creating efficient software emulators for abstract machine architectures.

Tick, Evan↗

DOE OSTI2025

Emulating the Lyman-Alpha forest 1D power spectrum from cosmological simulations: new models and constraints from the eBOSS measurement

We present the Lyssa suite of high-resolution cosmological simulations of the Lyman-α forest designed for cosmological analyses. These 18 simulations have been run using the Nyx code with 40963 hydrodynamical cells in a 120 Mpc (∼ 81 Mpc/h) comoving box and individually provide sub-percent level convergence of the Lyman-α forest 1d flux power spectrum. We build a Gaussian process emulator for the Lyssa simulations in the lym1d likelihood framework to interpolate the power spectrum at arbitrary parameter values. We validate this emulator based on leave-one-out tests and based on the parameter constraints for simulations outside of the training set. We also perform comparisons with a previous emulator, showing a percent level accuracy and a good recovery of the expected cosmological parameters. Using this emulator we derive constraints on the linear matter power spectrum amplitude and slope parameters A Lyα and n Lyα . While the best-fit Planck ΛCDM model has A Lyα = 8.79 and n Lyα = -2.363, from DR14 eBOSS data we find that A Lyα < 7.6 (95% CI) and n Lyα = -2.369 ± 0.008. The low value of A Lyα , in tension with Planck, is driven by the correlation of this parameter with the mean transmission of the Lyman-α forest. This tension disappears when imposing a well-motivated external prior on this mean transmission, in which case we find A Lyα = 9.8 ± 1.1 in accordance with Planck.

Walther, Michael↗