Search NASA⌕ Search

SEARCH · Search NASA

Results for “energy band-gap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Multilayered luminescent solar concentrators based on engineered quantum dots

Luminescent solar concentrators (LSCs) based on engineered quantum dots (QDs) are disclosed that include at least one lower band-gap energy LSC layer and at least one higher band-gap energy LSC layer. The higher band-gap energy LSC layer has a higher internal quantum efficiency (IQE) than the lower band-gap energy LSC layer. The lower band-gap energy LSC layer may broadly absorb the remainder of the solar spectrum that is not absorbed by previous layers. An external optical efficiency (EQE) of at least 6%, and in some cases, more than 10%, may be achieved by such LSCs.

Source record↗
DOE OSTI2022

Cubic Crystal Structure Formation and Optical Properties within the Ag–B II –M IV –X (B II = Sr, Pb; M IV = Si, Ge, Sn; X = S, Se) Family of Semiconductors

Quaternary chalcogenide semiconductors are promising materials for energy conversion and nonlinear optical applications, with properties tunable primarily by varying the elemental composition and crystal structure. Here, we first analyze the connections among several cubic crystal structure types, as well as the orthorhombic Ag 2 PbGeS 4 -type structure, reported for select members within the Ag–B II –M IV –X (B II = Sr, Pb; M IV = Si, Ge, Sn; X = S, Se) compositional space. Focusing on the Ag–Pb–Si–S and Ag–Sr–Sn–S systems, we show that one structure type, with the formulas Ag 2 Pb 3 Si 2 S 8 and Ag 2 Sr 3 Sn 2 S 8 , is favored. We have prepared powder and single-crystal samples of Ag 2 Pb 3 Si 2 S 8 and Ag 2 Sr 3 Sn 2 S 8 , showing that each takes on the noncentrosymmetric cubic space group I$\bar{43}$d and is isostructural to the previously reported compound Ag 2 Sr 3 Ge 2 Se 8 . Through hybrid density functional theory calculations, these cubic compounds are demonstrated to be (quasi-)direct band gap semiconductors with high densities of states at the band maxima. Furthermore, the band-gap energies are measured by reflectance spectroscopy as 1.95(3) and 2.66(4) eV for Ag 2 Pb 3 Si 2 S 8 and Ag 2 Sr 3 Sn 2 S 8 , respectively. We further measure the optical properties and show the electronic band structures of three other isostructural A I –B II –M IV –X-type materials, i.e., Ag 2 Sr 3 Si 2 S 8 , Ag 2 Sr 3 Ge 2 S 8 , and Ag 2 Sr 3 Ge 2 Se 8 , showing that the band gaps can be predictably tuned by element substitution. Detailed visual analyses of the different structures and of their relationships with other members of the Ag–B II –M IV –X compositional family provide a basis for a broader understanding of the structure formation and optoelectronic properties within the quaternary chalcogenide semiconductor family.

14 SOLAR ENERGY↗
DOE OSTI2022

2,3-Diphenylthieno[3,4-b]pyrazines as Hole-Transporting Materials for Stable, High-Performance Perovskite Solar Cells

High-performance and durable perovskite solar cells (PSCs) have advanced rapidly, enabled in part by the development of superior interfacial hole-transporting layers (HTLs). Here, in this study, a new series of 2,3-diphenylthieno[3,4-b]pyrazine (DPTP)-based small molecules containing bis- and tetrakis-triphenyl amino donors (1–3) was synthesized from simple, low-cost, and readily available starting materials. The matched energy levels, ideal surface topographies, high hole mobilities of 8.57 × 10 –4 cm 2 V –1 S –1 , and stable chemical structures of DPTP-4D (3) make it an effective hole-transporting material, delivering a PCE of 20.18% with high environmental, thermal, and light-soaking stability when compared to the reference HTL materials, doped Spiro-OMeTAD and PTAA in PSC n-i-p planar devices. Overall, these DPTP-based molecules are promising HTM candidates for the fabrication of stable PSCs.

14 SOLAR ENERGY↗
DOE OSTI2022

Review of Direct Neutron Conversion and Detection Processes

Commercial and laboratory neutron detection systems use indirect neutron response of materials like pressurized helium-3 (via nuclear reaction 3He(n, p)3H) to measure and count neutrons emanating from a source. Recently a host of semiconductors, especially a ternary semiconductor of lithium indium diselenide (6LiInSe2) and a quaternary alloy of enriched lithium-6, indium, phosphorous, and selenium (6LiInP2Se6), have shown promising neutron counting possibilities by directly converting neutrons into charge-carrying elements within the body of the semiconductor. These semiconductors have high thermal neutron capture cross sections, suitable energy bandgaps (~2.0 electron volts) for room-temperature operations, and a favorable electronic band structure for efficient electron charge transport. The article examines the semiconductor properties of these compounds in terms of their neutron counting capabilities and possible ways to extract neutron energy information from them. Lithium-6 and boron-10 (with thermal neutron absorption cross sections of 938 ± 6 and 3855 ± 26 barns, respectively) produce charged particles to be measured via indirect neutron interactions. The efficiency of indirect conversion neutron detectors is limited because of the inefficiencies in conversion mechanism. In case of direct conversion, the neutrons create charged particles in a single material for neutron capture and charge collection, increasing detection efficiency. Unlike 3He proportional counters, which provide no neutron energy information, the semiconductors can be used as neutron energy spectrometer. Fully resolved neutron energy by 6LiInP2Se6 from a plutonium-beryllium source has been reported in the literature. We will discuss the influence of these multilayered semiconductors’ crystallographic structures and growth techniques on neutron energy determination.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2024

Electro-physical properties of surface-barrier diodes on low-resistance n-Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 crystals

The electro-physical properties of Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 n-type conductivity single crystals with relatively low resistivity were studied. The determined resistivity of semiconductor single crystals Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 n-type conductivity is equal to ρ≈2 Ω-cm at 293K. The activation energy of dark conductivity, measured from the temperature dependence of the resistivity of the In/Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 /In structure, is equal to ΔE≈0.11eV. From optical measurements of the absorption coefficient from the energy of photons in the region of large α, the band-gap width of the single crystal was found, which is equal to E g =1.53eV. Diode structures of Ni/Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 /In obtained by vacuum sputtering of Ni on the surface of a single crystal n-Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 were manufactured and studied. Here, the rectification coefficient at a voltage of U=1V is equal to 10 8 . Within the framework of the Sah-Noys-Shockley carrier generation-recombination model, a quantitative match of the experimental measurements of the volt-ampere characteristics with the calculation was achieved.

(Cd,Mn)(Te,Se)↗
DOE OSTI2024

Energy Level Gradients from Surface to Bulk in Hybrid Metal-Halide Perovskite Thin Films

Variations in local strain, defect densities, and composition of hybrid metal-halide perovskites have been reported to create heterogeneous energy landscapes in thin films, which impact charge-carrier diffusion and recombination dynamics. Here, we employ one- and two-photon transient absorption spectroscopy to selectively probe the dynamics of charge carriers from surface and bulk regions of methylammonium lead bromide thin films. Differences in the transient absorption spectra indicate that an energy gradient of approximately 100 meV is formed between the higher band-gap surface and lower band-gap bulk regions. Thus, during their lifetime, photoexcited carriers move away from the surface to recombine in the bulk, where our experiments detect long-lived charge populations despite the significant band splitting that has conventionally been assumed to inhibit efficient radiative recombination. Supported by first-principles calculations, we demonstrate that bright emission can still arise from the bulk with states that occupy a wide range of momenta in the vicinity of the band extrema, which show strong dipole transitions. Our results report that photoexcitations in the hybrid perovskites avoid defect-rich surface regions, and that particularly strong emission is generated from accumulated excitation populations in the bulk. Published by the American Physical Society 2024

Bourelle, Sean A.↗
DOE OSTI2021

Light-driven permanent transition from insulator to conductor

The transition from insulator to conductor can be realized in some materials but requires modification of both the arrangement of atoms and their electronic configurations. This is often achieved by doping. Here we reveal a different mechanism the lattice may adopt to induce such a transition. Experiments showed the surprising finding that limited exposure to subband-gap light caused a permanent transition from an insulator state to a conductor state in the insulating oxide Ga 2 O 3 , with a nine orders of magnitude increase in electronic conduction. Furthermore, annealing up to 400 °C did not suppress or decrease the induced conductivity. Photoexcitation by light-induced modification in the charge state of defects and subsequent lattice distortion around them was suggested to be the underlying mechanism behind this transition. Density functional theory calculations confirmed that modifying the charge state of defects leads to redistribution of the localized electrons and massive structural distortion in the surrounding lattice, causing large shifts in the density of states and introducing new states with shallower energy levels. Both experimental and theoretical results revealed the introduction of stable shallow energy levels, explaining the mechanism behind the transition from an insulator to a conductor state by light. We suggest that this mechanism may occur in other wide band-gap metal oxides leading to drastic modification in their electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Characterization of Performance Degradation Mechanisms in Low-Cost High Throughput DI-O3 Layer for Passivated Contact Silicon Solar Cells

Characterization and mitigating performance limiting defects in Silicon (Si) PV is one of key areas to be addressed to improve PV hardware costs and energy yield in order to lower the levelized cost of energy (LCOE) of installed PV cost to $0.02/kWh. As Si PV cells efficiencies have surpassed 22% and approaching 23%, the recombination at the metal contacts have become the focus point to be addressed. Passivated contact technologies—having a heterojunction with a band-gap larger than silicon between the metal and silicon—have emerged as a great potential for future highand ultrahigh-efficiency solar cells, as it concurrently reduces recombination and increases carrier selectivity, by incorporating thin films within the contact structure. Passivated contact Si solar cell technologies use a wide variety of tunnel layers—playing a crucial role to passivate metal contacts and tunnel charge carriers—including stoichiometric silicon oxide (SiO 2 ) grown by thermal oxidation and Low-Pressure Chemical Vapor Deposition (LPCVD) technique and silicon oxide (SiO x ) by hot nitric acid. However, thorough investigations on understanding the failure and performance degradation mechanisms associated with tunnel layers are still limited to date. Unlocking those degradation characteristics in crucial tunnel layers could improve the reliability and energy yield of passivated contact Si solar cells. Besides, the technique of growing aforementioned tunneling layers are low throughput, and requires high temperature processes and/or a vacuum environment. In this project, we investigated the performance degradation mechanisms of a low-cost high-throughput ozonated oxide (DI-O 3 ) tunnel layer for the passivated contact Si solar cells.

14 SOLAR ENERGY↗
DOE OSTI2023

Mechanistic origins of excitonic properties in 2D perovskites: Implications for exciton engineering

As the field of 2D halide perovskites (HPs) matures, state-of-the-art techniques to measure important properties, such as the band gap (E g ) and exciton binding energy (E b ), continue to produce inconsistent values. Here, we tackle this long-standing problem by obtaining direct measurements of E g and E b for 31 unique HP structures. The E b values are lower than in previous literature reports and lower than expected from standard theory that assumes excitons are screened by optical-frequency dielectric constants. These low E b values are shown to be a consequence of unique screening effects, such as superlattice screening and phonon screening. Here, we find a strikingly strong correlation between E b and E g and provide design principles to a priori tune E g and E b to their optimal values. As such, this work offers a blueprint for E g -E b engineering of low-dimensional semiconductors as an even more useful replacement for simply band-gap engineering.

14 SOLAR ENERGY↗
DOE OSTI2024

Impact of symmetry breaking and spin-orbit coupling on the band gap of halide perovskites

Halide perovskite (HP) materials have recently emerged as a class of semiconductors with immense promise for various optoelectronic applications, ranging from solar cells to light-emitting diodes. One of the unique attributes of HPs is their tunable band gaps with different factors governing their value. Furthermore, the first factor is related to relativistic corrections [“mass-Darwin,” connected to the ns 2 lone pairs, and spin-orbit coupling (SOC)] that induce an orbital shift or degeneracy splitting, resulting in a band-gap reduction. The second factor involves the structural configuration: in HPs the local symmetry of each Wyckoff position tends to be broken, inducing an opening of the band gap. Based on high-throughput density functional theory calculations, this paper systematically studies a possible self-cancelation on the band-gap correction for HPs when the polymorphous configuration—structural effects—and the SOC—electronic effects—are included. Our results indicate that the nature of interplay between SOC and symmetry breaking (SB) is that they are independent decoupling effects to describe the band-gap magnitude in halide perovskites. As a result of that, we observe a transitivity of the band-gap description; i.e., if we know the band gap of halide perovskites without SB and SOC, we can independently add the effects of band-gap reduction due to SOC and band-gap opening due to SB, regardless of the order in which these effects are considered.

14 SOLAR ENERGY↗
DOE OSTI2024

Carrier Dynamics and Photoluminescence in Antimony-Doped CdTe and CdSeTe

Arsenic (As)-doped graded Cd(Se,Te) photovoltaics have achieved record efficiency of 22.4%, but further increases in efficiency have been limited by doping activation of only ~1% and radiative voltage losses of ~100 meV. Antimony (Sb) can also act as a p-type dopant of Cd(Se,Te) but has received relatively little attention. We measured carrier dynamics and photoluminescence of Sb-doped CdTe and CdSeTe films grown by vapor-transport deposition, with dopant activation up to ~20% Time resolved terahertz (TRTS) and photoluminescence (TRPL) data were fit by simulating the semiconductor equations, revealing bulk lifetimes of >20 ns in CdTe:Sb and >65 ns in CdSeTe:Sb and surface recombination velocities <1000 cm/s at alumina interfaces. We also qualitatively compare transients and PL spectra of doped and undoped films, with no apparent variation associated with hole concentrations up to 1015 cm-3. Preliminary variable temperature steady state photoluminescence (VT-SSPL) indicates dominant band-gap emission in CdSeTe:Sb and no evidence of potential fluctuations with Sb-doping up to this hole concentration.

14 SOLAR ENERGY↗
DOE OSTI2025

Ultrafast exciton and trion dynamics in highly 𝑛-doped Mo⁢S 2 monolayers: Many-body effects

Understanding many-body interactions of excitons and charge carriers in monolayer semiconductors is crucial for tuning their unique optical properties and optimizing their performance in optoelectronic devices. However, the sensitivity of these atomically thin semiconductors to doping, defects, and strain–arising from synthesis, substrate, and environmental conditions–hinders consistent observation of many-body effects. In this work, we employed linear and ultrafast transient optical absorption spectroscopy to investigate the influence of background doping on exciton many-body interactions in Mo⁢S 2 monolayers. Using reversible molecular physisorption gating, we achieved a high background doping density of 4.9 × 10 13 c⁢m −2 in an argon environment, which is significantly higher than those attainable with conventional electrical gating. Our results reveal a photoinduced 𝐴-exciton resonance redshift, attributed to band-gap renormalization at a low background-doping density of 4.3 × 10 12 c⁢m −2 in an air environment, transitioning to a blueshift at a high background-doping density of 4.9 × 10 13 c⁢m −2 due to dominant Pauli blocking effects and vertical excitation shifts. We further observed transient energy splitting between free-exciton and -trion states up to 57 meV due to exciton-electron interactions. The ultrafast spectroscopy further revealed exciton and trion dynamics, including fast energy splitting of exciton and trion resonances within 1 picosecond (ps) followed by a rapid decay having a lifetime of ∼5.4 ps. Furthermore, our results demonstrate the critical role of background-doping conditions in tuning many-body interactions and quasiparticle dynamics in 2D semiconductors, providing valuable insights for future device design and material engineering.

Doped semiconductors↗
DOE OSTI2025

Electron-Phonon Renormalization in the Proton-Conducting Electrolyte Ba Zr O 3 and Its Implications for High-Temperature Electrolysis

Electrical leakage is an inherent problem in solid-oxide fuel and electrolyzer cells, limiting their energy-conversion efficiency. High concentrations of electrons or holes can exacerbate this issue. However, it is largely unclear how the typical high operating temperatures of the systems influence their charge-carrier concentrations. In this work, we use first-principles calculations to examine how lattice vibrations impact electrical conductivity in conventional electrolytes, using Ba Zr O 3 as a representative material. Our analysis shows that phonon-induced shifts in the band gap and band edges lead to a dramatic increase in p -type carrier concentrations at temperatures above 600 K, compared to models that neglect temperature effects. Additionally, we reveal the importance of oxygen-ion motion on band-edge positions, which makes valence-band-edge shift dominate the band-gap change. Our study provides a protocol for calculating phonon-induced changes in similar oxides, paving the way for interrogating electrical leakage in electrolytes for high-temperature operation. Published by the American Physical Society 2025

25 ENERGY STORAGE↗
DOE OSTI2025

Coherently coupled carrier and phonon dynamics in elemental tellurium probed by extreme ultraviolet transient absorption

The narrow band-gap semiconductor elemental tellurium (Te) has a unique electronic structure due to strong spin-orbit splitting and a lack of inversion symmetry of its helical lattice. Using broadband extreme ultraviolet core-level transient absorption, we simultaneously measure the coherently coupled photoinduced carrier and lattice dynamics at the Te N4,5 edge initiated by a few-cycle NIR pulse. Ultrafast excitation of carriers leads to a coherently excited A1 phonon oscillation and the generation of a hot carrier population distribution that oscillates in temperature, and the phonon excursion and hot carrier temperature are π out of phase with respect to each other. The depths of modulation suggest a significant coupling between the electronic and lattice degrees of freedom in Te. A long-lived shift of the absorption edge suggests an excited state of Te in another equilibrium potential energy surface that lives on the order of the carrier recombination timescale. The observed phonon-induced oscillations of the hot carriers are supportive of a change in the metallicity, whereby Te becomes more metallic with increasing phonon-induced displacement. Additionally, near the Fermi level we observe an energy-dependent phase of the displacive excitation of the A1 phonon mode. The discovery of coherent coupling between the lattice and hot carriers in Te provides the basis to investigate coherent interactions between spin and orbital degrees of freedom. The results spectrally and temporally resolve the correlation between photoexcited hot carriers and coherent lattice excitations, providing insight on the optical manipulation of the Te electronic structure at high carrier densities exceeding 1021cm−3.

Adelman, Jonah R↗
DOE OSTI2026

High-throughput computation of electric polarization in solids via Berry flux diagonalization

Electric polarization in the absence of an externally applied electric field is a key property of polar materials, but the standard interpolation-based ab initio approach to compute polarization differences within the modern theory of polarization presents challenges for automated high-throughput calculations. Berry flux diagonalization [J. Bonini et al., Phys. Rev. B 102, 045141 (2020)] has been proposed as an efficient and reliable alternative, though it has yet to be widely deployed. Here, we assess Berry flux diagonalization using ab initio calculations of a large set of materials, introducing and validating heuristics that ensure branch alignment with a minimal number of intermediate interpolated structures. Our automated implementation of Berry flux diagonalization succeeds in cases where prior interpolation-based workflows fail due to band-gap closures or branch ambiguities. Benchmarking with ab initio calculations of 176 candidate ferroelectrics, we demonstrate the efficacy of the approach on a broad range of insulating materials and obtain accurate effective polarization values with fewer interpolated structures than prior automated interpolation-based workflows. Our real-space heuristics that can predict gauge stability a priori from ionic displacements enable a general automated framework for reliable polarization calculations and efficient high-throughput screening of chemically and structurally diverse polar insulators. These results establish Berry flux diagonalization as a robust and efficient method to compute the effective polarization of solids and to accelerate the data-driven discovery of functional polar materials.

Poteshman, Abigail N. [University of Chicago, IL (↗
DOE OSTI2024

Control, Fault Management, and Grid Support Functionality of an MV AC-DC Solid State Transformer based EV Extreme Fast Charging Station

Electric vehicles (EVs) have become increasingly popular in recent times while revolutionizing the consumer and commercial transportation market. The development of charging infrastructure has become one of the priorities for increasing the adoption of EVs. Extreme fast charging (XFC) technology can reduce the so-called ’range anxiety’ of consumers as they significantly reduce the charging time. With the advent of wide band-gap (WBG) power devices and improvement in power electronic converters, medium voltage (MV) solid state transformer (SST) based XFC system has the potential to replace the traditional XFC stations because of the lower footprint, ease of installation, enhanced control feature, and better system efficiency. The control system design is one of the critical aspects of the SST development process. Careful consideration and detailed analysis are required to find out suitable control method for the SST based on its topology among different centralized and decentralized control architectures. Also, the control parameters selection and potential improvement to the transient response of the controller ought to be investigated. Another major concern of the SST is different types of internal fault which reduces the overall reliability of the XFC system. As a result, designing a robust protection system is essential. Among different fault modes, open circuit switch faults have received significant attention as an active research area because of their likelihood and severe effects on converters. Therefore, the power stages used in the XFC system require functional and accurate open circuit switch fault management methods. An equally significant aspect of this SST based XFC is its compatibility in a microgrid where there is no synchronous generator present. When the grid is not available, the XFC SSTs can provide grid forming capability and continue supplying the critical loads in islanded mode. The transition between grid connected and islanded mode, especially the grid resynchronization process has to be carefully performed for the safety of the microgrid components. The challenges posed by the aforementioned issues have inspired the work done in this dissertation. Here, a 13.2 kV, 1 MVA, AC/DC SST for the XFC system is examined and a comparative analysis is conducted to select the control architecture based on feasibility of implementation and performance. A detailed control parameter design process is demonstrated considering the sensor dynamics and delay. The selected decentralized control method is augmented by introducing a novel sensor-less load current feedforward method to provide better voltage regulation at the DC bus during a change of load. Next, in the fault management section, a hierarchical failure mode effect analysis (FMEA) is proposed to enable a systematic design of the internal fault protection of the XFC SST as there are limited examples in the literature regarding the analysis of the safety and design of the protection of a power electronic converter system. Novel open circuit switch fault management methods for the converters in the system are presented. Finally, XFC SST based MV microgrid operations in grid connected mode and islanded mode are explored. A secondary control method for grid resynchronization is presented and a design process of control parameters is shown to ensure the stability of the secondary voltage and frequency regulation.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Density functional theory of material design: fundamentals and applications—II

Abstract This is the second and the final part of the review on density functional theory (DFT), referred to as DFT-II. In the first review, DFT-I, we have discussed wavefunction-based methods, their complexity, and basics of density functional theory. In DFT-II, we focus on fundamentals of DFT and their implications for the betterment of the theory. We start our presentation with the exact DFT results followed by the concept of exchange-correlation (xc) or Fermi-Coulomb hole and its relationship with xc energy functional. We also provide the exact conditions for the xc-hole, xc-energy and xc-potential along with their physical interpretation. Next, we describe the extension of DFT for non-integer number of electrons, the piecewise linearity of total energy and discontinuity of chemical potential at integer particle numbers, and derivative discontinuity of the xc potential, which has consequences on fundamental gap of solids. After that, we present how one obtains more accurate xc energy functionals by going beyond the LDA. We discuss the gradient expansion approximation (GEA), generalized gradient approximation (GGA), and hybrid functional approaches to designing better xc energy functionals that give accurate total energies. However, these functionals fail to predict properties like the ionization potential and the band gap. Thus, we next describe different methods of modelling these potentials and results of their application for calculation of the band gaps of different solids to highlight accuracy of different xc potentials. Finally, we conclude with a glimpse on orbital-free density functional theory and the machine learning approach.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Interlayer coupling in two-dimensional MoS 2 and phosphorene bilayers: Benchmark quantum Monte Carlo study of interaction energies and quasiparticle band gaps

Using high-accuracy many-body quantum Monte Carlo (QMC) methods, we study the effect of interlayer coupling on the properties of two-dimensional freestanding bilayers (BLs) of MoS 2 and phosphorene. The properties of the two BL-materials are very different and largely determined by the interlayer interaction, which is purely van der Waals in MoS 2 and partially electronic/chemical in phosphorene, resulting in a modest layer-dependent property modulation in MoS 2 and strong modulation in phosphorene. Multireference and symmetry considerations are used to construct state-of-the-art accuracy QMC trial wave functions. We determine the quasiparticle band gaps for both materials, $Δ^{\textrm{qp}}_{Γ→\textrm{K}}$ = 2.45 ± 0.05 eV in BL-MoS 2 and $Δ^{\textrm{qp}}_{Γ→Γ}$=1.59 ±0.1eV in BL-phosphorene. In conclusion, these benchmark band-gap values make it possible to consolidate the interpretation of the widely scattered experimental and theory data.

Huang, Yongda [Slovak Academy of Sciences (SAS), B↗