Search NASA⌕ Search

SEARCH · Search NASA

Results for “energy equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

On analysis and stochastic modeling of the particle kinetic energy equation in particle-laden isotropic turbulent flows

In this study, we analyze three-dimensional particle-laden, isotropic turbulence to develop an understanding of inertial particle dynamics from a kinetic energy perspective. Data trends implying inhomogeneous sampling of the flow by particles are identified and used to support a proposed particle behavior: particles appear to accumulate in regions of low flow kinetic energy over time because they lose kinetic energy and slow down in such regions, ultimately causing them to spend more time there. To elucidate this behavior, we derive a particle kinetic energy equation from the particle momentum equation, which incorporates inertial effects through the Schiller–Naumann drag correlation. Upon extracting fundamental physics from this equation, hypotheses regarding the role of the Stokes number in the temporal change of particle kinetic energy and the previously proposed particle behavior are evaluated using simulation data considering three Stokes numbers. Finally, a Fokker–Planck equation is used to derive the steady-state probability density function of the particle kinetic energy. The model fits the simulation data well and provides a tool for further investigation into understanding preferential concentration, as well as a reduced order model for predicting particle kinetic energy in turbulent flows.

42 ENGINEERING↗
DOE OSTI2022

Simulation of plasma transport in MPS-LD linear plasma device by using BOUT++

Here a linear plasma device (LPD) module based on the 2D transport module under the BOUT++ framework is developed in this paper to simulate plasma transport in the LPD. The LPD module includes three parts, i.e. magnetic field calculation, simulation mesh generation and plasma transport setup. The magnetic field is calculated with the circular current loop using the location and current information of each coil. The mesh generation code can produce a simulation mesh for LPD by employing the magnetic field. The plasma transport model is based on the reduced Braginskii equations, which consist of the continuity equation, momentum equation, and energy equation. The fluid neutral model is applied for neutral particle simulation. Deuterium (D) and helium (He) ions and atoms can be simulated by the model. The first attempt to simulate plasma transport in the new LPD, called multiple plasma simulation linear plasma device (MPS-LD), is presented using the developed model. The D plasma transport in the MPS-LD is simulated and benchmarked against the two-point model, showing the validation of the BOUT++ simulation. The effects of radial transport on the heat load to the target are studied, which illustrates the significant impact of the radial diffusivities $D_⟂$ and $\mathcal{X}_{⟂i,e}$ on the plasma. Moreover, the He impurity injection process during the discharge is studied with emphasis on plasma–impurity interactions. The simulation results show that He injection can reduce the plasma energy load to the target significantly, and the efficiency depends on the He source density and injection velocity. The present work provides an alternative and flexible simulation tool for plasma transport in LPDs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Simulation of the impact of particle recycling on the plasma in MPS-LD device based on the BOUT++ LPD module

A linear plasma device (LPD) module has been developed under the BOUT++ framework to simulate plasma transport in the MPS-LD. However, previously, the LPD module used a simplistic neutral particle model that only includes particle density and velocity, which prevents the full understanding of the plasma-neutrals interactions. In this work, we further optimize the neutral model by using a more complete neutral fluid model containing the continuity equation, momentum equation, and energy equation. The reactions such as charge exchange, excitation, and radiation collisions are included. Since the neutral particle source is mainly provided by particle recycling from the target, a particle recycling model is employed, which includes both fast reflection and slow thermal release. The upgraded LPD module is applied to simulate the argon (Ar) discharge experiment of MPS-LD, and the benchmark against experiment measurement and SOLPS-ITER simulation results are presented. Good agreements are obtained, showing the validation of the upgraded module. After that, the impact of particle recycling on Ar plasma is investigated. It is found that a higher recycling coefficient (R) promotes the achievement of high-density plasma at the target. In conclusion, the recycled Ar atoms change target plasma pressure as well as plasma-neutral collisions, which both contribute to plasma momentum loss, thus promoting the rollover of ion flux to the target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Cosmological measurements from void-galaxy and galaxy-galaxy clustering in the Sloan Digital Sky Survey

We present the cosmological implications of measurements of void-galaxy and galaxy-galaxy clustering from the Sloan Digital Sky Survey (SDSS) Main Galaxy Sample (MGS), Baryon Oscillation Spectroscopic Survey (BOSS), and extended BOSS (eBOSS) luminous red galaxy catalogues from SDSS Data Release 7, 12, and 16, covering the redshift range 0.07 < $z$ < 1.0. We fit a standard ΛCDM cosmological model as well as various extensions, including a constant dark energy equation of state not equal to −1, a time-varying dark energy equation of state, and these same models allowing for spatial curvature. Results on key parameters of these models are reported for void-galaxy and galaxy-galaxy clustering alone, both of these combined, and all these combined with measurements from the cosmic microwave background (CMB) and supernovae (SN). For the combination of void-galaxy and galaxy-galaxy clustering, we find tight constraints of Ω m = 0.356 ± 0.024 for a base ΛCDM cosmology, Ω m = $0.391^{+0.028}_{-0.021}$, w = $-1.50^{+0.43}_{-0.28}$ additionally allowing the dark energy equation of state $w$ to vary, and Ω m = $0.331^{+0.067}_{-0.094}$, $w=-1.41^{+0.70}_{-0.31}$, and Ω k = $0.06^{+0.18}_{-0.13}$ further extending to non-flat models. The combined SDSS results from void-galaxy and galaxy-galaxy clustering in combination with CMB+SN provide a 30 per cent improvement in parameter Ω m over CMB+SN for ΛCDM, a 5 per cent improvement in parameter Ω m when $w$ is allowed to vary, and a 32 per cent and 68 per cent improvement in parameters Ω m and Ω k when allowing for spatial curvature.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Multi-stage preconditioners for thermal–compositional–reactive flow in porous media

We present a family of multi-stage preconditioners for coupled thermal-compositional-reactive reservoir simulation problems. The most common preconditioner used in industrial practice, the Constrained Pressure Residual (CPR) method, was designed for isothermal models and does not offer a specific strategy for the energy equation. For thermal simulations, inadequate treatment of the temperature unknown can cause severe conver-gence degradation. When strong thermal diffusion is present, the energy equation exhibits significant elliptic behavior that cannot be accurately corrected by CPR's second stage. In this work, we use Schur-complement decompositions to extract a temperature subsystem and apply an Algebraic MultiGrid (AMG) approximation as an additional preconditioning stage to improve the treatment of the energy equation. We present results for several two-dimensional hot air injection problems using an extra heavy oil, including challenging reactive In-Situ Combustion (ISC) cases. We show improved performance and robustness across different thermal regimes, from advection dominated (high Péclet number) to diffusion dominated (low Péclet number). The number of linear iterations is reduced by 40–85% compared to standard CPR for both homogeneous and heterogeneous media, and the new methods exhibit almost no sensitivity to the thermal regime.

42 ENGINEERING↗
DOE OSTI2023

Drift-ordered fluid vorticity equation with energy consistency

Although drift-ordered fluid models are widely applied in tokamak edge turbulence simulations, the models used are acknowledged not to conserve energy or even electrical charge. The present paper aims to remove many of the existing pitfalls in drift-fluid models, however, with the objective of finding a solution simple enough to be implemented in numerical applications. Our main result is an improved version of the drift-Braginskii equations involving a generalized vorticity function. In the new drift-Braginskii system, the quasi-neutrality condition translates into a transport equation for a generalized vorticity, expressed in conservation form, and related to the total mass-weighted circulation. It is found that kinetic energy conservation can be achieved if the polarization flow is defined recursively. In conclusion, the resulting model conserves the kinetic energy associated with E×B and diamagnetic flows and retains the associated perpendicular kinetic energy flux.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Toward full simulations for a liquid metal blanket: part 2. Computations of MHD flows with volumetric heating for a PbLi blanket prototype at Ha ~10 4 and Gr ~10 12

On the pathway toward full simulations for a liquid metal (LM) blanket, this part 2 extends a previous study of purely magnetohydrodynamic (MHD) flows in a DCLL blanket in reference Chen et al (2020 Nucl. Fusion 60 076003) to more general conditions when the MHD flow is coupled with heat transfer. The simulated prototypic blanket module includes all components of a real LM blanket system, such as supply ducts, inlet and outlet manifolds, multiple poloidal ducts and a U-turn zone. Volumetric heating generated by fusion neutrons is added to simulate thermal effects in the flowing lead–lithium (PbLi) breeder. The MHD flow equations and the energy equation are solved with a DNS-type finite-volume code ‘MHD-UCAS’ on a very fine mesh of 470 × 10 6 cells. The applied magnetic field is 5 T (Hartmann number Ha ~ 10 4 ), the PbLi velocity in the poloidal ducts is 10 cm s –1 (Reynolds number Re ~10 5 ), whereas the maximum volumetric heating is 30 MW m –3 (Grashof number Gr ~ 10 12 ). Four cases have been simulated, including forced- and mixed-convection flows, and either an electrically conducting or insulating blanket structure. Various comparisons are made between the four computed cases and also against the purely MHD flows computed earlier in reference Chen et al (2020 Nucl. Fusion 60 076003) with regards to the (1) MHD pressure drop, (2) flow balancing, (3) temperature field, (4) flows in particular blanket components, and (5) 3D and turbulent flow effects. The strongest buoyancy effects were found in the poloidal ducts. In the electrically non-conducting blanket, the buoyancy forces lead to significant modifications of the flow structure, such as formation of reverse flows, whereas their effect on the MHD pressure drop is relatively small. In the electrically conducting blanket case, the buoyancy effects on the flow and MHD pressure drop are almost negligible.

Physics↗
DOE OSTI2025

DESI 2024 VI: cosmological constraints from the measurements of baryon acoustic oscillations

We present cosmological results from the measurement of baryon acoustic oscillations (BAO) in galaxy, quasar and Lyman-α forest tracers from the first year of observations from the Dark Energy Spectroscopic Instrument (DESI), to be released in the DESI Data Release 1. DESI BAO provide robust measurements of the transverse comoving distance and Hubble rate, or their combination, relative to the sound horizon, in seven redshift bins from over 6 million extragalactic objects in the redshift range 0.1 < z < 4.2. To mitigate confirmation bias, a blind analysis was implemented to measure the BAO scales. DESI BAO data alone are consistent with the standard flat ΛCDM cosmological model with a matter density Ω m =0.295±0.015. Paired with a baryon density prior from Big Bang Nucleosynthesis and the robustly measured acoustic angular scale from the cosmic microwave background (CMB), DESI requires H 0 =(68.52±0.62) km s -1 Mpc -1 . In conjunction with CMB anisotropies from Planck and CMB lensing data from Planck and ACT, we find Ω m =0.307± 0.005 and H 0 =(67.97±0.38) km s -1 Mpc -1 . Extending the baseline model with a constant dark energy equation of state parameter w, DESI BAO alone requirew=-0.99 +0.15 -0.13 . In models with a time-varying dark energy equation of state parametrised by w 0 and w a , combinations of DESI with CMB or with type Ia supernovae (SN Ia) individually prefer w 0 > -1 and w a < 0. This preference is 2.6σ for the DESI+CMB combination, and persists or grows when SN Ia are added in, giving results discrepant with the ΛCDM model at the 2.5σ, 3.5σ or 3.9σ levels for the addition of the Pantheon+, Union3, or DES-SN5YR supernova datasets respectively. For the flat ΛCDM model with the sum of neutrino mass ∑ m ν free, combining the DESI and CMB data yields an upper limit ∑ m ν < 0.072 (0.113) eV at 95% confidence for a ∑ m ν > 0 (∑ m ν > 0.059) eV prior. These neutrino-mass constraints are substantially relaxed if the background dynamics are allowed to deviate from flat ΛCDM.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Scaling patch analysis of turbulent planar plume

Proper scaling in turbulent planar plumes is investigated in this study using a scaling patch approach. Based on the scaled boundary conditions, a proper velocity scale for the mean axial flow is the plume centerline velocity U ref = U ctr , and a proper temperature scale for the temperature excess is Θ ref = T ctr – T ∞ , where T ctr is the plume centerline temperature and T ∞ is the ambient fluid temperature. By seeking an admissible scaling, a key concept in the scaling patch approach, for the mean continuity, mean momentum, and mean energy equations, respectively, the following is found: (1) a proper scale for the mean transverse flow is V ref = ( d δ / d x ) U ctr , where d δ / d x is the growth rate of the plume width. (2) A proper scale for the Reynolds shear stress is R vu , ref = U ctr V ref = ( d δ / d x ) U ctr 2 , a mix of the scales for the mean axial and transverse flows. (3) A proper scale for the turbulent heat flux is R v θ , ref = V ref Θ ctr , a mix of the scales for the mean transverse flow and mean temperature excess. The mean transverse flow thus plays a critical role in the scaling of turbulent planar plumes. Approximate functions are developed for the scaled mean transverse flow, Reynolds shear stress, and turbulent temperature flux, and are found to agree favorably with experimental and numerical simulation data. The integral analysis of the mean momentum equation yields a Richardson number Ri, which remains invariant in the axial direction. The Richardson number is defined as Ri = def g β Θ ctr δ t / ( U ctr V ref ) ≈ 1 / 2 , where g is the gravitational acceleration, β is the thermal expansion coefficient, and δ t is the plume half-width based on the mean temperature profile. This Richardson number arises directly from the scaling patch analysis of the mean momentum equation, including both the streamwise and transverse velocity scales.

42 ENGINEERING↗
DOE OSTI2023

Advanced Turbulence Models for Large-Scale Atmospheric Boundary Layer Flows

We present high-fidelity large-eddy-simulation (LES) modeling approaches for the turbulent atmospheric boundary layer (ABL) flows. Wind energy is a prime example of an application driven by ABL. Generation of electrical energy from farms of wind turbines at night in the stable ABL is a particularly interesting situation. In this report, we consider the well-known GEWEX (Global Energy and Water Cycle Experiment) Atmospheric Boundary Layer Study (GABLS) stably stratified benchmark LES case. We use a high-order spectral element code Nek5000/RS, which is supported under the DOE's Exascale Computing Project (ECP) Center for Efficient Exascale Discretizations (CEED) project, targeting application simulations on various acceleration-device based exascale computing platforms. In our earlier ANL report, we demonstrated our newly developed subgrid-scale (SGS) models based on high-pass filter (HPF), mean-field eddy viscosity (MFEV), and Smagorinsky (SMG) with no-slip and traction boundary conditions, provided with low-order statistics, convergence and turbulent structure analysis. In this report, we extend the range of our SGS modeling approaches in the context of the mean-field eddy viscosity (MFEV), to include the solution of an SGS turbulent kinetic energy equation (TKE). We demonstrate the model fidelity of Nek5000/RS in comparison to that of AMR-Wind, a block-structured second-order finite-volume code with adaptive-mesh-refinement capabilities, with which we studied scaling performance for both codes in comparison on DOE's leadership computing platforms.

17 WIND ENERGY↗
DOE OSTI2025

Apparent 𝑤 <−1 and a Lower 𝑆 8 from Dark Axion and Dark Baryons Interactions

We show that a simple coupling between dark energy and dark matter can simultaneously address two distinct hints at new physics coming from cosmological observations. The first is the recent evidence from the DESI project and supernovae observations that the dark energy equation of state w is evolving over cosmic time from an earlier value that is <-1 to a present-day value >-1. The second observation is the so-called S8 tension, describing the suppression of the growth of matter overdensities compared to that expected in the ΛCDM model. Here, we propose a stable, technically natural particle physics implementation of this idea, in which dark matter consists of dark baryons in a strongly coupled hidden sector, and the dark energy field is the associated dark axion. The time variation of the dark matter mass results in an effective dark energy equation of state that exhibits a phantom crossing behavior consistent with recent results. It also results in a slight delay in matter-radiation equality, which suppresses the overall growth of density perturbations.

Axions↗
DOE OSTI2022

Dark Energy Survey Year 3 results: Cosmological constraints from galaxy clustering and galaxy-galaxy lensing using the MagLim lens sample

The cosmological information extracted from photometric surveys is most robust when multiple probes of the large scale structure of the Universe are used. Two of the most sensitive probes are the clustering of galaxies and the tangential shear of background galaxy shapes produced by those foreground galaxies, so-called galaxy-galaxy lensing. Combining the measurements of these two two-point functions leads to cosmological constraints that are independent of the way galaxies trace matter (the galaxy bias factor). The optimal choice of foreground, or lens, galaxies is governed by the joint, but conflicting requirements to obtain accurate redshift information and large statistics. We present cosmological results from the full 5000 deg 2 of the Dark Energy Survey’s first three years of observations (Y3) combining those two-point functions, using for the first time a magnitude-limited lens sample (MagLim) of 11 million galaxies, especially selected to optimize such combination, and 100 million background shapes. We consider two flat cosmological models, the Standard Model with dark energy and cold dark matter ( Λ CDM ) a variation with a free parameter for the dark energy equation of state ( w CDM ). Both models are marginalized over 25 astrophysical and systematic nuisance parameters. In Λ CDM we obtain for the matter density Ω m = 0.320 - 0.034 + 0.041 and for the clustering amplitude S 8 ≡ σ 8 ( Ω m / 0.3 ) 0.5 = 0.778 - 0.031 + 0.037 , at 68% C.L. The latter is only 1 σ smaller than the prediction in this model informed by measurements of the cosmic microwave background by the Planck satellite. In w CDM we find Ω m = 0.32 - 0.046 + 0.044 , S 8 = 0.777 - 0.051 + 0.049 and dark energy equation of state w = - 1.031 - 0.379 + 0.218 . We find that including smaller scales, while marginalizing over nonlinear galaxy bias, improves the constraining power in the Ω m - S 8 plane by 31% and in the Ω m - w plane by 41% while yielding consistent cosmological parameters from those in the linear bias case. These results are combined with those from cosmic shear in a companion paper to present full DES-Y3 constraints from the three two-point functions ( 3 × 2 pt ).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Numerical Analysis of Liquid Metal MHD Flow and Heat Transfer for Open-Surface Li Divertor in FNSF

Within the ongoing U.S.-based program on the development of liquid metal plasma-facing components, numerical simulations and analyses are performed to address the feasibility of the open-surface Li divertor. In the previous scoping studies (Smolentsev, 2021), heat-removal capabilities of the divertor were assessed using a simplified flow model for a slug-type velocity profile and constant flow thickness. Here, new analyses take into account forces acting on the flowing Li layer. Three reduced-order mathematical models are applied under the conditions of the U.S. Fusion Nuclear Science Facility (FNSF) to access magnetohydrodynamic (MHD) flow development effects, velocity distribution, and surface waves: 1) fully developed MHD flow; 2) quasi-2-D developing MHD flow; and 3) multiphase MHD flow. The obtained results for MHD flows and the surface heat flux computed with the plasma code scrape-off layer plasma simulation for ITER (SOLPS-ITER) are then used as input data to compute the temperature distribution in the divertor by solving the convection–diffusion energy equation.

Smolentsev, Sergey↗
DOE OSTI2026

Dark Energy Survey: Implications for cosmological expansion models from the final DES baryon acoustic oscillation and supernova data

The Dark Energy Survey (DES) recently released the final results of its two principal probes of the expansion history: Type Ia supernovae (SNe) and baryonic acoustic oscillations (BAO). In this paper, we explore the cosmological implications of these data in combination with external cosmic microwave background (CMB), big bang nucleosynthesis (BBN), and age-of-the-Universe information. The BAO measurement, which is ∼ 2 σ away from Planck ’s Λ CDM predictions, pushes for low values of Ω m compared to Planck, in contrast to SN which prefers a higher value than Planck. We identify several tensions among datasets in the Λ CDM model that cannot be resolved by including either curvature ( k Λ CDM ) or a constant dark energy equation of state ( w CDM ). By combining BAO + SN + CMB despite these mild tensions, we obtain Ω k = - 5.5 - 4.2 + 4.6 × 10 - 3 in k Λ CDM , and w = - 0.94 8 - 0.027 + 0.028 in w CDM . In w CDM , BAO and SN push again in different directions of parameter space, favoring, respectively, w < - 1 and w > - 1 . If we open the parameter space to w 0 w a CDM [where the equation of state of dark energy varies as w ( a ) = w 0 + ( 1 - a ) w a ], all the datasets are mutually more compatible, and we find concordance in the [ w 0 > - 1 , w a < 0 ] quadrant, with BAO pushing for w a < 0 and SN for [ w 0 > - 1 , w a < 0 ] . For DES BAO and SN in combination with Planck -CMB, we find a 3.2 σ deviation from Λ CDM , with w 0 = - 0.67 3 - 0.097 + 0.098 , w a = - 1.3 7 - 0.50 + 0.51 , a Hubble constant of H 0 = 67.8 1 - 0.86 + 0.96 km s - 1 Mpc - 1 , and an abundance of matter of Ω m = 0.310 9 - 0.0099 + 0.0086 . For the combination of all the background cosmological probes considered (including CMB’s angular acoustic scale θ ⋆ ), we still find a deviation of 2.8 σ from Λ CDM in the w 0 - w a plane. Assuming a minimal neutrino mass, this work provides tentative evidence for non- Λ CDM physics, which is consistent with recent claims in support of evolving dark energy, or a source of unknown systematics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Cosmological constraints from the DESI DR1 joint power spectrum and bispectrum analysis

We derive cosmological parameter constraints from the Dark Energy Spectroscopic Instrument (DESI) Data Release 1 (DR1) galaxy clustering data, based on a joint full-shape analysis of the power spectrum multipoles and the bispectrum monopole using the ShapeFit framework. This is the follow-up of our previous work, in which we obtained for the first time constraints on the ShapeFit parameters using the bispectrum of DESI DR1. Here we present the first ShapeFit cosmological inference results using the bispectrum of DESI DR1. We recover values for the matter density parameter and Hubble constant of respectively $Ω_m=0.310\pm0.012$ and $H_0=[68.92\pm0.97]\,\mathrm{km\, s^{-1} Mpc^{-1}}$, consistent with previous results from the full DESI DR1 dataset that did not use the bispectrum signal. The inclusion of the bispectrum significantly tightens the constraints on the amplitude of fluctuations, reducing the error-bars in $\ln(A_s\times10^{10})$ by approximately 20%, compared to using the power spectrum alone. We also explore extended cosmological models by performing fits for the evolving dark energy equation of state $w_0w_a$, and the sum of neutrino masses $\sum m_ν$. In these cases, we obtain constraints slightly larger than the ones from previous works from the DESI collaboration, due to not combining the full-shape results with other probes in all tracers. We find no strong evidence of deviations from standard $Λ$CDM, with the dark energy equation-of-state remaining within 2$σ$ from a cosmological constant $Λ$, and the neutrino mass being consistent with the normal hierarchy, $\sum m_ν<0.1\,[eV]$ at 95% confidence limit. These constraints are broadly consistent with other DESI DR1 analyses, thus validating the robustness of the ShapeFit compression approach and the inclusion of the bispectrum for cosmological inference.

Novell-Masot, S. [ICC, Barcelona U.; Geneva U., De↗
DOE OSTI2026

Cosmological constraints from the DESI DR1 joint power spectrum and bispectrum analysis

We derive cosmological parameter constraints from the Dark Energy Spectroscopic Instrument (DESI) Data Release 1 (DR1) galaxy clustering data, based on a joint full-shape analysis of the power spectrum multipoles and the bispectrum monopole using the ShapeFit framework. This is the follow-up of our previous work, in which we obtained for the first time constraints on the ShapeFit parameters using the bispectrum of DESI DR1. Here we present the first ShapeFit cosmological inference results using the bispectrum of DESI DR1. We recover values for the matter density parameter and Hubble constant of respectively $Ω_m=0.310\pm0.012$ and $H_0=[68.92\pm0.97]\,\mathrm{km\, s^{-1} Mpc^{-1}}$, consistent with previous results from the full DESI DR1 dataset that did not use the bispectrum signal. The inclusion of the bispectrum significantly tightens the constraints on the amplitude of fluctuations, reducing the error-bars in $\ln(A_s\times10^{10})$ by approximately 20%, compared to using the power spectrum alone. We also explore extended cosmological models by performing fits for the evolving dark energy equation of state $w_0w_a$, and the sum of neutrino masses $\sum m_ν$. In these cases, we obtain constraints slightly larger than the ones from previous works from the DESI collaboration, due to not combining the full-shape results with other probes in all tracers. We find no strong evidence of deviations from standard $Λ$CDM, with the dark energy equation-of-state remaining within 2$σ$ from a cosmological constant $Λ$, and the neutrino mass being consistent with the normal hierarchy, $\sum m_ν<0.1\,[eV]$ at 95% confidence limit. These constraints are broadly consistent with other DESI DR1 analyses, thus validating the robustness of the ShapeFit compression approach and the inclusion of the bispectrum for cosmological inference.

Novell-Masot, S. [ICC, Barcelona U.; Geneva U., De↗