Search NASA⌕ Search

SEARCH · Search NASA

Results for “eutectic synthesis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Room-Temperature Eutectic Synthesis for Upcycling of Cathode Materials

Ni-rich LiNixMnyCo1−x−yO2 (NMC) materials have been adopted in a range of applications, including electric vehicles. The recycled NMC material from a spent cell would be much more valuable if it could be upgraded to a Ni-rich, more energy-dense version of the material. This work demonstrates a simple, inexpensive, and facile method to upcycle LiNi1/3Mn1/3Co1/3O2 (NMC111, 160 mAh∙g−1), a cathode used in early generations of electric vehicle batteries, to LiNi0.8Mn0.1Co0.1O2 (NMC811, 190 mAh∙g−1), a more energy-dense cathode material. In this study, a preliminary investigation into a room-temperature eutectic synthesis of NMC811 is performed using NMC111, LiOH, and nickel nitrate as precursors. The synthesized material showed the desired crystal structure and stoichiometry, though the cycle life and Li diffusion coefficient need improvement when compared to commercially available NMC811. This study demonstrates an interesting proof of concept of the room-temperature eutectic synthesis process for LIB cathodes and could be improved by tuning the synthesis conditions.

lithium-ion battery↗
DOE OSTI2020

Eutectic Synthesis of the P2-Type Na x Fe 1/2 Mn 1/2 O 2 Cathode with Improved Cell Design for Sodium-Ion Batteries

An engaging area of research in sodium-ion batteries (SIBs) has been focusing on discovery, design, and synthesis of high-capacity cathode materials in order to boost energy density to levels close enough to that of state-of-the-art lithium-ion batteries. Of particular interest, P2-type layered oxide, Na 2/3 Fe 1/2 Mn 1/2 O 2 , has been researched as a potential cathode in SIBs based on its high theoretical capacity of 260 mA h/g and use of noncritical materials. However, the reported synthesis methods are not only complex and energy-demanding but also often yield inhomogeneous and impure materials with capacities less than 200 mA h/g under impractical test conditions. Here, we report a novel synthesis route using low-temperature eutectic reaction to produce highly homogeneous, crystalline, and impurity-free P2-Na x Fe 1/2 Mn 1/2 O 2 with enhanced Na-ion diffusivity and kinetics. The overall electrochemical performances of the Na-ion cells have been improved by pairing the P2-cathode with presodiated hard carbon anodes, leading to reversible capacities in the range of 180 mA h/g. This new approach is a contribution toward the simplification of synthesis and scalability of sodium-based cathodes with high crystallinity and fine-tuned morphology and the realization of a sodium-ion battery system with lower cost and improved electrochemical performance.

25 ENERGY STORAGE↗
DOE OSTI2021

The Deep Eutectic Solvent Precipitation Synthesis of Metastable Zn 4 V 2 O 9

A precipitation method involving a deep eutectic solvent (DES)–a mixture of hydrogen bond donor and acceptor–is used to synthesize a ternary metal oxide. Without toxic reagents, precipitates consisting of Zn 3 (OH) 2 V 2 O 7 ·nH 2 O and Zn 5 (OH) 6 (CO 3 ) 2 are obtained by simply introducing deionized H 2 O to the DES solution containing dissolved ZnO and V 2 O 5 . Manipulation of the synthetic conditions demonstrates high tunability in the size/morphology of the two-dimensional nanosheets precipitated during the dynamic equilibrium process. According to differential scanning calorimetry and high-temperature powder X-ray diffraction, Zn 3 V 2 O 8 and ZnO obtained by the annealing of the precipitate are intermediates in the reaction pathway toward metastable Zn 4 V 2 O 9 . Intimate mixing of the metal precursors achieved by the precipitation method allows access to the metastable zinc-rich vanadate with unusually rapid heat treatment. Furthermore, the UV–vis and surface photovoltage spectra reveal the presence of sub-band gap states, stemming from the reduced vanadium (V 4+ ) center. Photoelectrochemical measurements confirm weak photoanodic currents for water and methanol oxidation. For the first time, this work shows the synthesis of a metastable oxide with the DES-precipitation route and provides insight into the structure–property relationship of the zinc-rich vanadate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Choline Fluoride-Ethylene glycol deep eutectic solvent mixture – Synthesis and physicochemical properties

A critical factor in achieving tunability in DESs is varying the type of hydrogen bond acceptors (HBAs) and donors (HBDs). Choline halides (ChX), such as ChCl and ChBr, have been studied to investigate the effect of the choline anion on DESs. However, ChF-based DESs have been underrepresented in scientific research. ChF has excellent potential, such as high electron affinity, ionization potential, and strong hydrogen bond interactions. Moreover, ChF-based DES can lead to a deeper understanding of DESs due to the NMR-active 19F nuclear spin nature. We report the first synthesis and characterization of choline fluoride-EG (1:2, ChF:EG) DES, which we named “EthalineF.” We studied this mixture using various spectroscopic techniques, including NMR, FT-IR, Raman, and UV–vis spectroscopies. Polarity, density, viscosity, and conductivity measurements were collected as well. Transient absorption spectroscopy (TAS) was used to study the solvation dynamics of EthalineF. 19F NMR indicated that some fluoride anions (~15%) are coordinated to the choline cation. In EthalineF, the new type of observed fluoride anions is proposed to be a tight-binding choline-fluoride ion pair. Further, EthalineF has a larger solvodynamic radius than Ethaline. This can explain the lower conductivity for EthalineF compared to Ethaline despite the higher fluidity and solvation dynamics for EthalineF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

Template-directed synthesis of oligonucleotides under eutectic conditions

One of the most important sets of model prebiotic experiments consists of reactions that synthesize complementary oligonucleotides from preformed templates under nonenzymatic conditions. Most of these experiments are conducted at 4 degrees C using 0.01-0.1 M concentrations of activated nucleotide monomer and template (monomer equivalent). In an attempt to extend the conditions under which this type of reaction can occur, we have concentrated the reactants by freezing at -18 degrees C, which is close to the NaCl-H2O eutectic at -21 degrees C. The results from this set of experiments suggest that successful syntheses can occur with poly(C) concentrations as low at 5 x 10(-4) M and 2MeImpG concentrations at 10(-3) M. It was also anticipated that this mechanism might allow the previously unsuccessful poly(A)-directed synthesis of oligo(U)s to occur. However, no template effect was seen with the poly(A) and ImpU system. The failure of these conditions to allow template-directed synthesis of oligo(U)s supports the previously proposed idea that pyrimidines may not have been part of the earliest genetic material. Because of the low concentrations of monomer and template that would be expected from prebiotic syntheses, this lower temperature could be considered a more plausible geologic setting for template-directed synthesis than the standard reaction conditions.

NASA Discipline Number 52-20↗
DOE OSTI2022

Correlation of Oxygen Anion Redox Activity to In‐Plane Honeycomb Cation Ordering in Na x Ni y Mn 1− y O 2 Cathodes

Sodium‐ion batteries (SIBs) are one of the most promising next‐generation energy storage systems because of their abundant and low‐cost component materials. However, the lower energy density of SIBs compared with lithium‐ion batteries diminishes their practical value proposition. Among the many sodium‐based cathodes, layered transition metal oxides with high sodium content have energy densities comparable with the lithium‐ion battery technology. When charged above 4.1 V, the sodium‐based cathodes often undergo transformations because the activation of oxygen anion redox causes irreversible oxygen release, transition metal ion migration, lattice distortion, and rapid capacity decay. Here, in situ gas analysis is performed to evaluate the lattice oxygen anion redox activity in Na x Ni y Mn 1− y O 2 cathodes with P2 and O3 structural orderings. Operando X‐ray diffraction and neutron diffraction are performed to assess the structural changes related to lattice oxygen redox and transition metal ion migration in Na x Ni y Mn 1− y O 2 cathodes. The results unveil that in‐plane honeycomb cationic ordering can help suppress oxygen anion redox activity, which is critical for the future design of layered transition metal oxide cathodes that are prone to achieve high‐energy for durable SIBs.

25 ENERGY STORAGE↗
DOE OSTI2025

Synthesis of cobalt grown from Co-S eutectic in high magnetic fields

Samples of Co were grown directly in the ferromagnetic state under equilibrium conditions using a cobalt sulfide flux. Magnetic fields up to 9 T were applied during growth, and isolated Co products exhibit progressively elongated morphologies, from cubes to rectangular rods to needle-like tendrils with poorly-defined facets. The degree of elongation of the major axis was found to correlate with magnetic field direction, strength, and gradient. Two-dimensional X-ray diffraction data indicate some level of polycrystalline-like samples, and quantitative analyses (Le Bail and Rietveld) of the one-dimensional data confirm the presence of hcp and fcc phases. The magnetic responses indicate a partial alignment of the magnetic easy-axis of the hcp phase along the magnetic field present during growth.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Achieving extraordinary thermal stability of salt hydrate eutectic composites by amending crystallization behaviour with thickener

Commercial thermal energy storage (TES) systems necessitate reliable thermal performance throughout their operational lifetime. Repeated volume changes of the phase change materials (PCMs) during thermal cycling disengages thermal contacts between the conductive fillers like expanded graphite (EG) in TES composites, causing unstable thermal conductivity (k) that fades with cycling. Our in-operando crystallization studies on eutectic PCM made of zinc nitrate hexahydrate (ZNH) and KNO 3 revealed that the thermal stability of PCM composites can be considerably degraded by the formation of large and sharp-cornered PCM crystals during the freezing cycle. While the crystals can push EG particles, disengaging thermal contacts between them, we have newly discovered that carboxymethyl cellulose (CMC) can be used to retain the thermal contacts by forming networks of smaller PCM crystals. Furthermore, the scalable synthesis methodology of EG/ZNH eutectic composites was introduced. Here, in this study, EG particles were strongly connected into a matrix via a stable, corrosion resistant polydimethylsiloxane (PDMS) binder, stabilizing thermal networks and thereby maintaining k up to 1000 melt/freeze cycles. The thermal conductivity of our 25 vol% EG sample (13.3 W m -1 K -1 ) is more than 48% higher than other salt hydrate eutectic composites reported in the literature. We expect this study to provide insights on cooperative interaction between different components of TES systems (PCM, filler, thickener, binder) for exceptionally robust thermal properties.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Microfluidic, One-Batch Synthesis of Pd Nanocrystals on N-Doped Carbon in Surfactant-Free Deep Eutectic Solvents for Formic Acid Electrochemical Oxidation

One of the grand challenges that impedes practical applications of nanomaterials is the lack of robust manufacturing methods that are scalable, cheap, and environmentally friendly. In this work, we address this challenge by developing a microfluidic approach that produces surfactant-free Pd nanocrystals (NCs) uniformly loaded on N-doped porous carbon in a one-batch process. The deep eutectic solvent (DES) prepared from choline chloride and ethylene glycol was employed as a novel synthesis solvent, and its extended hydrogen networks and abundant ionic species effectively stabilize Pd facets and confine nanocrystal sizes without using surfactants. The microreactors provide faster heat exchange and more uniform mass transport, which in combination with DES produced Pd NCs with better-defined shape and predominately exposed Pd (100) facet. Furthermore, we describe that the N-doped functional groups in porous carbon direct dense and uniform heterogeneous growth of Pd NCs in a one-batch process, thereby eliminating a separate catalyst deposition step that is often involved in conventional synthesis. The Pd NCs in the one-batch-produced Pd/C catalysts exhibited a size distribution of similar to ~13 ± 3.5 nm and a high ESCA of 46.0 m 2 /g and delivered 362 mA/mg for formic acid electrochemical oxidation with improved stability, demonstrating the unique potentials of microfluidic reactors and DES for the controllable and scalable synthesis of electrocatalyst materials for practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Volatilized Molten Salts: An Alternative Avenue for Synthesizing Single-Phase Perovskites

Single phase La 0.8 Sr 0.2 MnO 3 (LSM) and core-shell La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF)-LSM have been synthesized using a volatilized mol-ten salt synthesis (vMSS) method for the first time with a LiCl-KCl eutectic. While deleterious to LSM formation when the MSS takes place in the liquid phase, LiCl-KCl eutectic successfully facilitates LSM formation when volatilized. Specifically, KCl evaporates before LiCl and promotes formation of LSM via the gaseous phase. As time progresses, LiCl volatilizes and contributes negatively to Sr retention in the perovskite phase in accordance with Lux-Flood chemistry and to product phase purity. The vMSS is therefore a way to obviate the more immediate restrictions of Lux-Flood chemistry in the liquid phase. LiCl-KCl eutectic can also be used to successfully synthesis core-shell LSCF-LSM nanoparticles in times as short as 1 hour at 600 °C. These results demonstrate the surprising versatility and flexibility of the MSS method to synthesize numerous potential energy relevant materials with greater ease than previously thought.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Neptunyl and Uranyl Peroxide Chemistry in Molten Salts, Uranyl Structures from Nature, and Thermodynamic Studies Extending into the Transuranium Elements (Final Report)

This project was initially funded in 2007 and the current technical report is for 2019-2022. The specific objectives of this project (2019-2022) were: (1) Synthesis of actinide peroxide compounds in molten salt eutectics, (2) Studies of new uranyl minerals with fascinating structures and compositions, (3) Drop-solution calorimetric studies of actinide compounds extending into the transuranium elements, with an emphasis on the uranyl-sulfate system, (4) Continuation of studies of uranyl vanadate clusters synthesized using ionic liquids, (5) The training of Ph.D. graduate students in actinide chemistry, and to introduce undergraduate students to actinide research through providing research assistantships and supervision. The report lists 67 archival journal papers describing the work, of which 23 were since 2019. Highlights of the work are summarized for the period 2019-2022.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Microwave-Assisted Solution Synthesis of Metastable Intergrowth of AgInS2 Polymorphs

The intergrowth of stable and metastable AgInS2 polymorphs was synthesized using a microwave-assisted synthesis. The samples were synthesized in water and in a deep eutectic solvent (DES) consisting of choline chloride and thiourea. An increase in the metal precursor concentration improved the crystallinity of the synthesized samples and affected the particle size. AgInS2 cannot be synthesized from crystalline binary Ag2S or In2S3 via this route. The solution synthesis reported here results in the intergrowth of the thermodynamically stable polymorph (space group I4¯2d, chalcopyrite structure) and the high-temperature polymorph (space group Pna21, wurtzite-like structure) that is metastable at room temperature. A scanning transmission microscopy (STEM) study revealed the intergrowth of tetragonal and orthorhombic polymorphs in a single particle and unambiguously established that the long-thought hexagonal wurtzite polymorph has pseudo-hexagonal symmetry and is best described with the orthorhombic unit cell. The solution-synthesized AgInS2 polymorphs intergrowth has slightly lower bandgap values in the range of 1.73 eV–1.91 eV compared to the previously reported values for tetragonal I4¯2d (1.86 eV) and orthorhombic Pna21 (1.98 eV) polymorphs.

Adeyemi, Adedoyin N. (ORCID:0000000340096150)↗
DOE OSTI2022

Halide sublattice dynamics drive Li-ion transport in antiperovskites

Here, in this work, we resolve how proton dynamics and halide mixing enhance or impede ionic conduction in protonated lithium antiperovskites (pLiAP) at compositions near the eutectic points of the halide salts. As a material class, pLiAPs of the form Li 3-x OH x X, (X = Cl, Br) show vast compositional design freedom; however, the resulting properties are susceptible to synthesis and processing methodologies. Proton incorporation and halide mixing stabilize the perovskite cubic phase at low temperatures (<50 °C) and using halide mixtures near the eutectic points (~250 to 300 °C) offer possibilities of lower temperature and faster synthesis and processing conditions (<1 h). Mixed-halide compositions such as Li 2 OHCl 0.37 Br 0.63 lead to a 30-fold improvement in room temperature ionic conductivity of a single halide structure, 1.5 × 10 -6 vs. 4.9 × 10 -8 S cm -1 (Li 2 OHCl). We combine infrared spectroscopy and nuclear magnetic resonance with first-principles density functional theory calculations to deconvolute halide mixing effects from local proton dynamics on Li-ion transport. In contrast to what has been supposed, our findings suggest that the halide sublattice dynamics, besides the OH rotation, correlate strongly with the fast-ion conduction at high temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Anhydrous volatile fatty acid extraction through omniphobic membranes by hydrophobic deep eutectic solvents: Mechanistic understanding and future perspective

Volatile fatty acids (VFAs) derived from arrested anaerobic digestion (AD) can be recovered as a valuable commodity for value-added synthesis. However, separating VFAs from digestate with complex constituents and a high-water content is an energy-prohibitive process. This study developed an innovative technology to overcome this barrier by integrating deep eutectic solvents (DESs) with an omniphobic membrane into a membrane contactor for efficient extraction of anhydrous VFAs with low energy consumption. Here, a kinetic model was developed to elucidate the mechanistic differences between this novel omniphobic membrane-enabled DES extraction and the previous hydrophobic membrane-enabled NaOH extraction. Experimental results and mechanistic modeling suggested that VFA extraction by the DES is a reversible adsorption process facilitating subsequent VFA separation via anhydrous distillation. High vapor pressure of shorter-chain VFAs and low Nernst distribution coefficients of longer-chain VFAs contributed to DES-driven extraction, which could enable continuous and in-situ recovery and conversion of VFAs from AD streams.

59 BASIC BIOLOGICAL SCIENCES↗