Search NASA⌕ Search

SEARCH · Search NASA

Results for “evaluation criteria”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Surface bypass as a means of protecting downstream-migrating fish: lack of standardised evaluation criteria complicates evaluation of efficacy

A surface bypass is a downstream migration structure that can help reduce hydropower-induced damage to migrating fish. We reviewed results of laboratory and field studies conducted in North America, Europe, and Australia between 1982 and 2017 concerning surface bypass efficacy. The main challenges in designing efficient surface bypasses were identified to be the simultaneous consideration of hydraulic and geometrical parameters and biological knowledge of fish behavior. Without the combined efforts of engineers and biologists, an efficient bypass design cannot be achieved. Moreover, the use of different criteria for evaluating bypass performance prevents direct comparison of the results of studies and deduction of design criteria. Bypass efficiency is a term that is widely used, but no standard definition of the term exists. Its definition can thus vary among studies. Two groups of definitions were identified: One group uses only those fish that approach or pass the dam whereas the other group includes all marked or tagged fish that are released upstream of a dam regardless of their fate after release. Within these groups, the definitions of bypass efficiency are comparable. Based on this concept, the efficiencies for different fish species at surface bypasses were identified: eels (11% // 10%), Pacific salmon (46% // 19%), steelhead and brown trout (49% // 41%), and Atlantic salmon (72% // 48%). Currently it is not possible to formulate design criteria for a wide range of species because available data are insufficient data. We recommend that in future bypass studies, more comparable standards and performance criteria should be used and both successes and failures should be reported.

Klopries, Elena-Maria↗

Development of a software tool and criteria evaluation for efficient design of small interfering RNA

Research highlights: {yields} The developed tool predicted siRNA constructs with better thermodynamic stability and total score based on positional and other criteria. {yields} Off-target silencing below score 30 were observed for the best siRNA constructs for different genes. {yields} Immunostimulation and cytotoxicity motifs considered and penalized in the developed tool. {yields} Both positional and compositional criteria were observed to be important. -- Abstract: RNA interference can be used as a tool for gene silencing mediated by small interfering RNAs (siRNA). The critical step in effective and specific RNAi processing is the selection of suitable constructs. Major design criteria, i.e., Reynolds's design rules, thermodynamic stability, internal repeats, immunostimulatory motifs were emphasized and implemented in the siRNA design tool. The tool provides thermodynamic stability score, GC content and a total score based on other design criteria in the output. The viability of the tool was established with different datasets. In general, the siRNA constructs produced by the tool had better thermodynamic score and positional properties. Comparable thermodynamic scores and better total scores were observed with the existing tools. Moreover, the results generated had comparable off-target silencing effect. Criteria evaluations with additional criteria were achieved in WEKA.

60 APPLIED LIFE SCIENCES↗

SD-WAN Evaluation Criteria for a Defense Information Systems Network Expeditionary Customer Edge

The Defense Information Systems Agency (DISA) has identified a service provision gap midway between the capacity and capability of a Defense Information Systems Network (DISN) transport Edge Points of Presence (POP) and U.S. Department of Defense (DoD) Enterprise Classified Travel Kit (DECTK). Some deployed force 100-user Tactical Operations Centers are in field locations far removed from the DISN transport core, in challenging environmental conditions with limitations on space, weight, power, and cooling for network equipment. As part of a multi-phase project, Pacific Northwest National Laboratory (PNNL) will gather and analyze requirements, design, develop, prototype, and test a miniaturized and ruggedized DISN Customer Edge POP scaled to support approximately 100 users in a field Tactical Operations Center. An Expeditionary Customer Edge (ECE) will be more suitable for field deployment than a DISN transport Edge POP, using ruggedized hardware and network function virtualization (NFV) to operate in challenging field environmental conditions, plus reduce weight, power, and cooling requirements. A key enabling technology for ECE is Software Defined Wide Area Networking (SD-WAN). This document provides: • A brief overview of SD-WAN use cases and how they apply to ECE • How SD-WAN technology compares to existing networks like DISN that use Optical Transport Networking (OTN) and Multiprotocol Label Switching (MPLS) • SD-WAN functional requirements relevant to ECE • A description of an ECE Virtual Prototype, including simulated wide area network paths and a DISN-representative implementation of MPLS, in Cisco Modeling Labs • Detailed network flow walkthroughs • Evaluation criteria based on ECE-relevant SD-WAN functional requirements Finally, an appendix provides an informal evaluation of Speedify—a commercial retail Virtual Private Network service—against the ECE SD-WAN evaluation criteria.

42 ENGINEERING↗

Multi-criteria evaluation in strategic environmental assessment for waste management plan, a case study: The city of Belgrade

Highlights: • The paper deals with the specific method of multi-criteria evaluation applied in drafting the SEA for the Belgrade WMP. • MCE of the planning solutions, assessed according to 37 objectives of the SEA and four sets of criteria, was presented in the matrix form. • The results are presented in the form of graphs so as to be easily comprehensible to all the participants in the decision-making process. • The results represent concrete contribution proven in practice. - Abstract: Strategic Environmental Assessment (SEA) is one of the key instruments for implementing sustainable development strategies in planning in general; in addition to being used in sectoral planning, it can also be used in other areas such as waste management planning. SEA in waste management planning has become a tool for considering the benefits and consequences of the proposed changes in space, also taking into account the capacity of space to sustain the implementation of the planned activities. In order to envisage both the positive and negative implications of a waste management plan for the elements of sustainable development, an adequate methodological approach to evaluating the potential impacts must be adopted and the evaluation results presented in a simple and clear way, so as to allow planners to make relevant decisions as a precondition for the sustainability of the activities planned in the waste management sector. This paper examines the multi-criteria evaluation method for carrying out an SEA for the Waste Management Plan for the city of Belgrade (BWMP). The method was applied to the evaluation of the impacts of the activities planned in the waste management sector on the basis of the environmental and socioeconomic indicators of sustainability, taking into consideration the intensity, spatial extent, probability and frequency of impact, by means of a specific planning approach and simple and clear presentation of the obtained results.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Uranium Mass Attribute System (UMAS) Study: Evaluation of Options against the Arms Control Evaluation Criteria

In this FY19 study, a range of possible measurement systems for confirming a U-235 mass attribute were identified. The systems were reviewed for their applicability in a potential future arms control agreement, and a subset of the eight most plausible systems were selected for further evaluation against the Arms Control Evaluation Criteria (ACEC). The evaluation results were then used to identify a primary and secondary recommended measurement system for confirming a U-235 mass attribute on warheads, nuclear components of warheads, and/or materials as part of a hypothetical arms control agreement.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Uranium Mass Attribute System (UMAS) Study: Evaluation of Options Against the Arms Control Evaluation Criteria

In this study, eleven possible radiation and other non-destructive measurement systems for confirming U-235 mass attribute were identified. The systems were reviewed for their applicability in a potential future arms control agreement, and a subset of the eight most plausible systems were selected for futher evaluation against the Arms Control Evaluation Criteria (ACEC). The evaluation results were then used to identify a primary and secondary recommended UMAS for confirming a U-235 mass attribute on warheads, nuclear components of warheads, and/or materials as part of a hypothetical arms control agreement.

36 MATERIALS SCIENCE↗

Pearls and pitfalls of response evaluation criteria in solid tumors (RECIST) v1.1 non-target lesion assessment

Oncologic imaging is an important facet of abdominal imaging that radiologists encounter nearly every day. Many oncology clinical trials utilize response evaluation criteria in solid tumors (RECIST) version 1.1 which divides tumor sites into target and non-target lesions. Although RECIST v1.1 provides clear instructions regarding the use of imaging in clinical trials, errors in response assessment still occur using these criteria. This is especially true of response assessment with regards to non-target lesions which involve rules which are less well-defined and somewhat subjective. This pictorial essay will review RECIST v1.1 guidelines and common non-target lesion errors which can occur at baseline and follow-up response assessment.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

NITRATE DESTRUCTION LITERATURE SURVEY AND EVALUATION CRITERIA

This report satisfies the initial phase of Task WP-2.3.4 Alternative Sodium Recovery Technology, Subtask 1; Develop Near-Tank Nitrate/Nitrite Destruction Technology. Some of the more common anions in carbon steel waste tanks at SRS and Hanford Site are nitrate which is corrosive, and nitrite and hydroxide which are corrosion inhibitors. At present it is necessary to periodically add large quantities of 50 wt% caustic to waste tanks. There are three primary reasons for this addition. First, when the contents of salt tanks are dissolved, sodium hydroxide preferentially dissolves and is removed. During the dissolution process the concentration of free hydroxide in the tank liquid can decrease from 9 M to less than 0.2 M. As a result, roughly half way through the dissolution process large quantities of sodium hydroxide must be added to the tank to comply with requirements for corrosion control. Second, hydroxide is continuously consumed by reaction with carbon dioxide which occurs naturally in purge air used to prevent buildup of hydrogen gas inside the tanks. The hydrogen is generated by radiolysis of water. Third, increasing the concentration of hydroxide increases solubility of some aluminum compounds, which is desirable in processing waste. A process that converts nitrate and nitrite to hydroxide would reduce certain costs. (1) Less caustic would be purchased. (2) Some of the aluminum solid compounds in the waste tanks would become more soluble so less mass of solids would be sent to High Level Vitrification and therefore it would be not be necessary to make as much expensive high level vitrified product. (3) Less mass of sodium would be fed to Saltstone at SRS or Low Level Vitrification at Hanford Site so it would not be necessary to make as much low level product. (4) At SRS less nitrite and nitrate would be sent to Defense Waste Processing Facility (DWPF) so less formic acid would be consumed there and less hydrogen gas would be generated. This task involves literature survey of technologies to perform the nitrate to hydroxide conversion, selection of the most promising technologies, preparation of a flowsheet and design of a system. The most promising technologies are electrochemical reduction of nitrates and chemical reduction with hydrogen or ammonia. The primary reviewed technologies are listed and they aredescribed in more detail later in the report: (1) Electrochemical destruction; (2) Chemical reduction with agents such as ammonia, hydrazine or hydrogen; (3) Hydrothermal reduction process; and (4) Calcination. Only three of the technologies on the list have been demonstrated to generate usable amounts of caustic; electrochemical reduction and chemical reduction with ammonia, hydrazine or hydrogen and hydrothermal reduction. Chemical reduction with an organic reactant such as formic acid generates carbon dioxide which reacts with caustic and is thus counterproductive. Treatment of nitrate with aluminum or other active metals generates a solid product. High temperature calcination has the potential to generate sodium oxide which may be hydrated to sodium hydroxide, but this is unproven. The following criteria were developed to evaluate the most suitable option. The numbers in brackets after the criteria are relative weighting factors to account for importance: (1) Personnel exposure to radiation for installation, routine operation and maintenance; (2) Non-radioactive safety issues; (3) Whether the technology generates caustic and how many moles of caustic are generated per mole of nitrate plus nitrite decomposed; (4) Whether the technology can handle nitrate and nitrite at the concentrations encountered in waste; (5) Maturity of technology; (6) Estimated annual cost of operation (labor, depreciation, materials, utilities); (7) Capital cost; (8) Selectivity to nitrogen as decomposition product (other products are flammable and/or toxic); (9) Impact of introduced species; (10) Selectivity for destruction of nitrate vs. nitrite; and (11) Cost of deactivation and demolition. Each technology was given a score from one to five, five being most desirable, in each criterion. The results for the evaluation, in order from most to least promising was, Electrochemical, Chemical Reduction, Hydrothermal and Calcining. Another report [Steimke and Steeper, 2011] contains a flowsheet and design of an in-tank Electrochemical unit.

08 HYDROGEN↗

APPLICATION OF THE FAVOR-OCI FRACTURE MECHANICS COMPUTER PROGRAM TO ASME CODE SECTION XI, IWB-3610 FLAW ACCEPTANCE CRITERIA EVALUATIONS

This paper presents an overview of added features in a new version of the FAVOR (Fracture Analysis of Vessels Oak Ridge) computer code called FAVOR-OCI. The original FAVOR code was developed at the US Department of Energy’s Oak Ridge National Laboratory (ORNL) under the sponsorship of the US Nuclear Regulatory Commission (NRC). FAVOR is applied by US and international nuclear power industries to perform deterministic and probabilistic fracture mechanics analyses of commercial nuclear reactor pressure vessels (RPVs). Appli-cations of FAVOR are focused on insuring that the structural integrity of aging, and increasingly embrittled, RPVs is main-tained throughout their licensed service life. Based on the final ORNL release of FAVOR, v16.1, FAVOR-OCI extends existing deterministic features of FAVOR while preserving all prev-iously-existing probabilistic capabilities of FAVOR.The objective of this paper is to describe new deterministic features in FAVOR-OCI that can be applied to analytical evaluations of planar flaws. These evaluations are consistent with the acceptance criteria of ASME Code, Section XI, Article IWB-3610, including Subarticles IWB-3611 (acceptance based on flaw size) and IWB-3612 (acceptance based on applied stress intensity factor). The linear elastic fracture mechanics (LEFM) capabilities of FAVOR-OCI also incorporate the analytical procedures presented in the Nonmandatory Appendix A, Analysis of Flaws, Article A-3000, Method of KI Determination, for both surface and subsurface (embedded) flaws.The paper describes a computational methodology for determining critical values of fracture-related parameters that satisfy ASME Code Section XI acceptance criteria for flaws exposed to multiple thermal-hydraulic transients. These com-pute-intensive analyses can be carried out with a single execution of FAVOR-OCI. The new methodology determines critical values by solving for either the point of tangency or point of intersection between applied KI versus time histories and a user-selected fracture toughness material property (e.g., ASME KIc, FAVOR Weibull KIc, or Master Curve Weibull KJc) for surface or subsurface flaws. Situations where warm prestress conditions apply can also be addressed. The paper highlights a need for this new capability via applications to a recent independent review of safety cases for RPVs in two Belgian nuclear power plants (NPPs). That review required ASME Section XI assessments of several thousand embedded, quasi-laminar flaws in the wall of each RPV. Analysis results provided by the new capability contributed to the technical bases compiled from several sources by the Belgian nuclear regulatory agency (FANC) and eventually used by FANC to justify the restart of these NPPs.

Dickson, Terry L.↗

E-Area LLWF Final Closure Cap Design – Constructability Evaluation Criteria for the Plot 8 and NR07E Disposal Areas

SRNS Design Engineering has been asked to complete a constructability evaluation of the proposed final closure cap designs for the Plot 8 (Engineered Trenches ET07, ET08, and ET09) and 643-7E NRCDA (NR07E) disposal areas located outside the original E-Area Low-Level Waste Facility (ELLWF) footprint. This memorandum presents the guidelines and criteria for the constructability evaluation. A new conceptual design for the ELLWF closure cap is not requested at this time.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Maintaining Continuity of Knowledge (CoK) of Spent Fuel Pools: Tool Survey - Scenarios, Technology Considerations, and Evaluation Criteria

The objective of this report is to identify the foundational elements which will drive the survey and evaluation of potential technologies to be considered to maintain CoK of spent fuel within a pool in the potential absence of light or in low light scenarios. These foundational elements include identifying use cases that highlight the type of environments in which the technologies may be asked to operate; the CoK elements required of the technologies, such as unique identification or presence/absence identification; the functional and operational requirements for the technologies; and the criteria against which the technologies will be evaluated.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Regulatory Treatment of Low Frequency External Events under a Risk-Informed Performance-Based Licensing Pathway: Safety Criteria Evaluation

There has been recent progress in the development of risk-informed performance-based (RIPB) design and licensing approaches, which leverage the insights gained from detailed risk assessments and utilize performance-based metrics to permit flexibility and innovation. The RIPB approaches have included the probabilistic treatment of external hazards, including low frequency events that are beyond the design basis. A preceding study conducted in FY21 noted that there are certain challenges to the probabilistic treatment of low frequency external events, which are primarily the result of uncertainty in the hazard curve and the associated plant response to rare, severe events. The current work expands on the previous study by examining the regulatory safety criteria contained within draft 10 CFR Part 53 and associated draft RIPB seismic design guidance. The evaluation identified potential challenges in demonstrating satisfaction of the safety criteria for low frequency external events, with specific difficulties associated with demonstrating compliance with cumulative safety criteria metrics, such as the quantitative health objectives (QHOs). Non-LWRs are expected to utilize the direct calculation of offsite consequence, rather than use surrogates, for comparison to the QHOs, which can be particularly challenging as the previously identified uncertainties are compounded by uncertainties in the response of the neighboring population. The current work details this evaluation and key findings. The central recommendation from this effort is that it is necessary to develop an approach for demonstrating compliance with the safety criteria in draft Part 53 that addresses the key challenges while providing flexibility to applicants.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Screening and Identifying High-Suitability Offshore CCUS Storage Areas in the Gulf of Mexico Using a Multi-Criteria Evaluation Approach

Poster presented at a virtual meeting for the AAPG Annual Conference and Exhibition held in Houston, Texas, September 29 to October 1, 2020. The poster describes a method to analyze multiple criteria defining potentially suitable CO2 saline storage sites or CO2-EOR sites with associated storage of CO2 in the Gulf of Mexico. These sites would require further analysis and characterization.

Wendt, Anna↗

Enhanced Evaluation Criteria to Meet the WIPP Waste Acceptance Criteria - 18655

The Waste Isolation Pilot Plant (WIPP) is a deep geologic repository for the disposal of Transuranic (TRU) waste and the only such disposal facility of its kind. TRU waste is radioactive mixed waste generated by the U. S. Department of Energy in support of National Defense. In 2014, the WIPP facility was shut down when two separate accidents occurred in the repository. The two accidents were a fire on a large underground haul truck that prompted evacuation and filled the mine with smoke and soot, and a radiation release that contaminated the exhaust ventilation and disposal areas of the mine. DOE performed two accident investigations in 2014 that resulted in many corrective actions. Some of the corrective actions resulted in significant changes in the WIPP Waste Acceptance Criteria (WAC) and are required to be applied to all TRU waste upon the resumption of shipments to WIPP. WIPP re-opened and began taking shipments again in 2017 and a large backlog of over 25,000 TRU waste containers that were certified prior to the new WAC have been undergoing re-evaluation since the re-opening. This paper will focus on the new WAC criteria that TRU waste must meet above-and-beyond previous WAC criteria and the implementation of new processes for approval. The primary area for these changes is in the area of waste characterization using Acceptable Knowledge (AK) and new detailed analyses required for chemical compatibility. The accident investigation revealed that the radiation release was due to a thermal runaway and bursting of the waste container due to inadvertent mixtures of nitrates and combustibles resulting in ignitable waste forms. In other words, the TRU waste container had incompatible contents that went undiscovered and created a hazard characteristic that was prohibited at WIPP. Through detailed chemical compatibility evaluations and new oversight, the DOE should be able to prevent a similar accident (see Figure 1). The new chemical compatibility evaluations and evaluations of oxidizing chemicals combined with combustibles are complex and detailed. Chemical compatibility is not a new requirement, but a much more detailed evaluation is a new requirement. And, obtaining historical information about the generation of the final waste form for legacy packaged waste can be very challenging. Specifically, determining possible amounts of chemicals in the waste can be extremely challenging. This paper does not explore in depth, the details of oxidizing chemicals. Other papers presented will discuss oxidizing chemicals. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗