Search NASA⌕ Search

SEARCH · Search NASA

Results for “experience report”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Summer 2021 Co-op Report: X-Ray Scintillation Detector (A Co-op Work Experience Report)

The M-3 team was in need of a detector that could be used properly characterize their X-Ray machines. It can also be used to diagnose the X-ray in the case that problems arise before or during an experiment. They put me in charge of designing, ordering, and constructing said detector. After doing research, I found that scintillation-based detectors would be the best diagnostic tool for this purpose. It will allow the team to collect a full photon count of the X-ray pulse as well as provide spectroscopy functions with which we can view photon counts at different energy levels. This will also allow them to calculate an accurate dose given from the machine. Due to lead times, the crystals are still in manufacturing, thus the detector could not be completed. Although the designs and calculations needed to construct and operate the scintillator have been completed which is what I will be presenting in this document. Compared to the detectors being used before, my design offers a cheaper and far more efficient alternative.

42 ENGINEERING↗
DOE OSTI2020

Heavily Confined PBX 9501 Experiment Report FY2020

Most accidental insults to explosives are invariably thermal in nature—either direct thermal via application of heat or indirect thermal when mechanical energy is converted to heat. The key question is whether the initial thermal insult transitions into a violent explosive response. If the ultimate violence attained is moderate, nearby personnel may be harmed or killed, but Inadvertent Nuclear Detonation (IND) will not occur. However, if the explosive ultimately transitions from deflagration to detonation (DDT) then IND becomes a concern. PBX 9501 is not an insensitive high explosive (IHE). It has been conclusively demonstrated that mechanically and thermally damaged PBX 9501 can readily DDT in heavy confinement. However, it is currently unknown whether pristine explosive—i.e. thermally and mechanically undamaged— is capable of DDT. Three experiments were conducted in order to determine whether very heavily confined pristine PBX 9501 is capable of DDT. All experiments used identical 6-inch diameter spherical charges of PBX 9501 confined in a 350 lb. hardened steel vessel with >2.5-inch thick walls. The first, primary experiment tested pristine PBX 9501 and was thermally ignited at the center of using a laser over optical fiber. Two additional baseline experiments were performed for comparison: the second test was initiated at the center using a detonator; the third test was bulk heated until self-ignition (cookoff). Velocimetry data in combination with hydrocode simulations suggest that a classical detonation wave did not develop in the pristine, thermally ignited PBX 9501. Reaction violence was approximately equivalent—in terms of ultimate energy output—as a full detonation, but the acceleration of metal fragments occurred more slowly than in a detonation-driven scenario.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Engineering Scale Drying of Aluminum-Clad Spent Nuclear Fuel: Experiment Report

Engineering-scale tests were performed to evaluate the relative effectiveness of forced gas and vacuum-drying processes on aluminum-clad spent nuclear fuel (ASNF) in preparation for extended dry storage. Drying models were developed to improve confidence in the likely range of conditions at the start of dry storage and to understand the factors most significant to each process. Testing was performed at the Holtec International Forced Helium Dehydration training facility in Camden, New Jersey, by students from the University of South Carolina in collaboration with Idaho National Laboratory. A full-size Type 1a basket, with a full-diameter vessel configuration (based on the Department of Energy standardized canister design), was used in combination with a 10 assembly surrogate ASNF arrangement to provide a proxy for geometry. A resistance heater incorporated in one assembly simulated the influence of 100 W decay heat. This instrumented chamber allowed testing of the removal of bulk water, physisorbed water, and chemisorbed water over a range of operating parameters with either drying process. Thick oxide films were grown on aluminum test plates to mimic the ASNF surface chemistry. These one-use test plates were housed within select assemblies during drying. Post-test analysis of these plates gave a measure of the moisture removed during each test, which was compared to a control. Instrumentation provided detailed thermal, humidity, and gas or pressure data relevant to each test. Model simulations generally compared favorably to instrument data for the tests. While both processes were able to remove bulk water, removal of chemisorbed water was shown to depend heavily on local temperature. To the disadvantage of vacuum drying, operations approaching or exceeding 220°C achieved consistently more dehydroxylation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Baltimore Turfgrass Field Experiment Campaign Report

The Baltimore Turfgrass Field Experiment (BTFE) consisted of an observation eddy covariance flux station, measuring CO 2 , H 2 O, and turbulent energy fluxes between the turfgrass field and the atmosphere. The tower was sited before the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s arrival, but for the purposes of this report, we can say that the campaign lasted as long as the Coast-Urban-Rural Atmospheric Gradient Experiment (CoURAGE) campaign, 12 months, 12/2024 through 11/2025. As stated, the flux tower was part of the COURAGE campaign on the M1 site. We set out to measure turfgrass because it is a ubiquitous part of the urban environment—in fact, it is the dominant vegetation land cover type in Baltimore and most cities. It contributes small but significantly to greenhouse gas balances as well as the energy balance in the urban environment. We also installed a soil temperature and matric potential profiling system as part of this experiment. Additionally, AmeriFlux asked us to participate in their soil matric potential soil moisture mapping experiment. We collected 12 soil samples to be analyzed by a team in Bloomington, Indiana: results are pending.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

CISME report on experiments with HMX powder, PBX 9501 prills, and heated PBX 9501

The ability to predict post-ignition explosive response is relevant to explosives safety, particularly weapons assembly/disassembly operations that must operate under a sufficiently conservative safety basis to meet risk mitigation criteria for inadvertent nuclear detonation (IND). In particular, hazard determinations hinge on whether the PBX 9501 main charge can ultimately attain detonation from an initial, non-shock, ignition stimulus. The CISME experiment uses a spherical explosive charge, which is thermally ignited in the center using a fiber-delivered infrared laser pulse. This ignition mechanism - i.e. a localized thermal hotspot - is representative of the ignition-causing insults typical in accident scenarios, including low-velocity impact, drop, skid, and punch events. In fiscal year 2018 CISME experiments were conducted with pristine PBX 9501 spheres, confined and unconfined. Sub-detonative, low-violence reactions were observed. Here we report experiments conducted since 2018. The explosive charge was varied: experiments were conducted with room temperature pour-density HMX powder and prills of PBX 9501, and heated, thermally damaged PBX 9501. Experiments were conducted in a confined configuration, with two 4 mm-thick stainless-steel hemispherical shells bolted around the sphere. Detonation, via DDT (deflagration-to-detonation transition) was observed in the 3-inch diameter powdered HMX and the 6-inch diameter heated and thermally-damaged PBX 9501 tests. No transition to DDT was observed in smaller diameters for those configurations, and no DDT was observed for pour-density prills of PBX 9501 of any diameter. The original test series demonstrated that the response of pristine, undamaged PBX 9501 to a central ignition is relatively benign. This new test series shows that increased porosity, lack of polymer binders and thermal damage can greatly increase the violence of the post-ignition response, up to and including detonation. These results bridge the explosive response of PBX 9501 from sub-detonative through detonation as a function of diameter and provide valuable test cases for modeling efforts that strive to capture the DDT threshold. By exploring explosive response in a more representative 3D geometry, we can also benchmark these new results to more plentiful DDT datasets generated from testing in 1D tube confinement (the historical test configuration)–the configuration upon which almost all DDT models were developed.

42 ENGINEERING↗
DOE OSTI2026

IER 519 Experiment Execution Report: TEX Hanford

The TEX-Hanford experiments were performed at the National Criticality Experiments Research Center (NCERC) at the Device Assembly Facility (DAF) at the Nevada Nuclear Security Site (NNSS). Three configurations were measured, with the measurements occurring in December 2025 and January 2026. The Fe-14 configuration was executed in December 2025; the Fe-11 configuration began its handstack on the Planet critical assembly machine in December 2025, but was taken critical in January 2026; the Fe-16 configuration was executed entirely in January 2026. The TEX-Hanford experiments were performed on the Planet critical assembly machine utilizing using PANN (Plutonium Aluminum No Nickel) ZPPR (Zero Power Physics Reactor) plutonium plates as fuel. The configurations were moderated with varying thicknesses of HDPE and iron absorber. This document details the configurations that were measured, preliminary reactivity measurements of the measured configurations, data files from the neutron detection systems, and results from the coordinate-measuring machine (CMM) measurements of the final stack height measurements each configuration.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Contributions to the LZ Experiment (Final Report)

We describe our contributions to the LZ Experiment, grouped into three broad categories: 1. Hardware Efforts; 2. Analysis Efforts; 3. Leadership/Administration. All the efforts described here were accomplished by the PI and two PhD students. The first LZ science data and first results papers (including Phys. Rev. Lett. 131, 041002 (2023) ) would not have been possible without these efforts.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Practical and Optimal Sequential Bayesian Experimental Design for Complex Systems Incorporating Human Experimenter Preferences (Final Scientific/Technical Report)

Experiments are indispensable for developing models of complex systems. Carefully designed experiments can provide substantial savings for these expensive data-acquisition opportunities. However, designs based on heuristics are often suboptimal for systems with multiphysics, nonlinear dynamics, and uncertain and noisy environments. Optimal experimental design, while leveraging predictive models, seeks to systematically quantify and maximize the value of experiments. In this project, we focused on the design of multiple experiments, where current approaches are largely suboptimal: batch-design does not adapt to new data acquired during the experiment campaign (no feedback), and greedy/myopic design ignores future dynamics and consequences (no lookahead). We developed the mathematical framework and computational methods for sequential optimal experimental design (sOED) for complex systems. We enabled tractable model-based sOED in a rigorous manner through novel algorithms based on reinforcement learning, and investigated the effects of human experimenters on the design process. Our methods are fully Bayesian, able to quantify and update uncertainty in a principled manner. The traits aimed by our approach—mathematical rigor and optimality, human effects and uncertainty quantification, computational practicality—are crucial for elevating the standards of artificial intelligence (AI) to support decision-making in scientific domains, and contribute toward trust and realistic adoption of AI in experimental design practice.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Coherent high-power RF wakefield generation by electron bunch trains in a metamaterial structure

In this paper, we present an experimental study of coherent high-power wakefield generation in a metamaterial (MTM) structure at 11.7 GHz by 65 MeV electron bunch trains at the Argonne Wakefield Accelerator (AWA), following a previous experiment, the Stage-I experiment, at the AWA. Both the Stage-II experiment, reported in this paper, and the Stage-I experiment were conducted using MTM structures, which are all-metal periodic structures with the period being much smaller than the wavelength. Differences between the two experiments include (1) structure length (Stage-I 8 cm and Stage-II 20 cm); (2) number of bunches used to excite the structure (Stage-I with two bunches, up to 85 nC of total charge; Stage-II with eight bunches, up to 224 nC of total charge); and (3) highest peak power measured (Stage-I 80 MW in a 2 ns pulse and Stage-II 380 MW in a 10 ns pulse). High-power radio frequency pulses were generated by reversed Cherenkov radiation of the electron beam due to the negative group velocity in the MTM structures. Because the radiation is coherent, a train of bunches with a proper spacing can build up to achieve a high peak power. The observed output power levels are very promising for future applications in direct collinear wakefield acceleration or in transfer to a second accelerator for two-beam acceleration.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The relationship between below average cognitive ability at age 5 years and the child’s experience of school at age 9

Background At age 5, while only embarking on their educational journey, substantial differences in children’s cognitive ability will already exist. The aim of this study was to examine the causal association between below average cognitive ability at age 5 years and child-reported experience of school and self-concept, and teacher-reported class engagement and emotional-behavioural function at age 9 years. Methods This longitudinal cohort study used data from 7,392 children in the Growing Up in Ireland Infant Cohort, who had completed the Picture Similarities and Naming Vocabulary subtests of the British Abilities Scales at age 5. Principal components analysis was used to produce a composite general cognitive ability score for each child. Children with a general cognitive ability score more than 1 standard deviation (SD) below the mean at age 5 were categorised as ‘Below Average Cognitive Ability’ (BACA), and those scoring above this as ‘Typical Cognitive Development’ (TCD). The outcomes of interest, measured at age 9, were child-reported experience of school, child’s self-concept, teacher-reported class engagement, and teacher-reported emotional behavioural function. Binary and multinomial logistic regression models were used to examine the association between BACA and these outcomes. Results Compared to those with TCD, those with BACA had significantly higher odds of never liking school [Adjusted odds ratio (AOR) 1.82, 95% CI 1.37–2.43, p < 0.001], of being picked on (AOR 1.27, 95% CI 1.09–1.48) and of picking on others (AOR 1.53, 95% CI 1.27–1.84). They had significantly higher odds of experiencing low self-concept (AOR 1.20, 95% CI 1.02–1.42) and emotional-behavioural difficulties (AOR 1.34, 95% CI 1.10–1.63, p = 0.003). Compared to those with TCD, children with BACA had significantly higher odds of hardly ever or never being interested, motivated and excited to learn (AOR 2.29, 95% CI 1.70–3.10). Conclusion Children with BACA at school-entry had significantly higher odds of reporting a negative school experience and low self-concept at age 9. They had significantly higher odds of having teacher-reported poor class engagement and problematic emotional-behavioural function at age 9. The findings of this study suggest BACA has a causal role in these adverse outcomes. Early childhood policy and intervention design should be cognisant of the important role of cognitive ability in school and childhood outcomes.

Bowe, Andrea K.↗
DOE OSTI2021

R&D Toward CUPID, a Tonne-Scale Bolometric 0vBB Experiment (Final Report)

This award supported the construction of infrastructure at MIT to test components for the future CUPID experiment. CUPID is the CUORE Upgrade with Particle ID. It uses Lithium molybdate crystals instrumented as scintillating bolometers to search for the neutrinoless double-beta decay of 100 Mo. A bolometer is a detector which uses the change in temperature of a crystal due to the passage of charged particles through the crystal to detect the particle. A scintillating bolometer uses a scintillating crystal as the primary bolometer and a germanium wafer as a secondary light-collecting bolometer. The charged particle therefore creates a heat and light signal, the ratio of these signals allows us to distinguish signal from background.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

The Consequences of Rayleigh-Taylor Instabilities on Implosion Dynamics in Gas-puff Z-pinch Experiments (Final Report)

The Laboratory of Plasma Studies (LPS), Cornell University, proposed to carry out a comprehensive series of gas-puff z-pinch experiments on a 1 MA pulsed power machine for the purpose of understanding the dynamics of imploding magnetized high energy density plasmas in the presence of Rayleigh-Taylor Instabilities (RTI). Cornell’s pulsed power facilities, including the associated diagnostic instruments, are largely supported under the auspices of the Center for Pulsed-power-driven High-energy-density Plasmas (the Center), an NNSA-sponsored Center of Excellence. The proposed experiments were carried out predominantly by LPS graduate student, Sophia Rocco (the “primary grad student”), in collaboration with other graduate students and the scientific and technical staff of the Center using Cornell’s 1 MA COBRA pulsed power facility and all of its associated diagnostic instruments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Dark Matter and Track Triggering with the CMS Experiment (Final Report)

This report summarizes the progress from DOE Early Career Award entitled “Dark Matter and Track Triggering with the CMS Experiment”. The first major goal of the project was to establish a sensitive Dark Matter (DM) search program for the CMS experiment in Run-2 of the LHC. Two related strategies were developed to accomplish this goal. First, we designed and executed searches for DM produced in association with heavy flavor quark pairs, top/anti-top (ttbar) and bottom/anti-bottom (bbbar). In addition, we sought to maximize the power of Run-2 DM searches through the development of a statistical combination of all major search channels within a consistent theoretical framework. The results of these aspects of the project are detailed in Section 1. The second major goal of the project was to develop a real-time “Level-1” tracking trigger system for the high-luminosity LHC (HL-LHC) CMS upgrade. Charged particle tracking in the first stage of the CMS trigger will be crucial for surviving the high-pileup environment expected at the HL-LHC. The L1 tracking trigger must process all front-end hit data sent from the inner Tracker and will have just 4us to output track primitives to the downstream L1 trigger without data loss. Our development of the CMS tracking trigger is described in Section 2. The team supported by the award is given in Section 3. The project resulted in 10 peer reviewed publications, a graduate student thesis, and contributions to the CMS Phase-2 Tracker Technical Design Report, as is detailed in Section 4. Our development work for the CMS tracking trigger has been integrated in the backend system architecture for the Tracker upgrade.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Science Reach of the SuperCDMS SNOLAB Experiment (Final Report)

The work carried out as part of this project focuses on the development of software tools to calculate the scientific reach of the SuperCDMS dark matter detection experiment, and to enable projection of the potential reach of future experiments base on this technology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗