Search NASA⌕ Search

SEARCH · Search NASA

Results for “extended x-ray adsorption fine structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Probing the Behavior of Composition‐Tunable Ultrathin PtNi Nanowires for CO Oxidation and Small‐Molecule Electrocatalytic Reactions

We have successfully synthesized ultrathin nanowires of pure Pt, Pt 99 Ni 1 , Pt 9 Ni 1 , and Pt 7 Ni 3 using a modified room-temperature soft-template method. Analysis of both methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) results found that the Pt 7 Ni 3 samples yielded the best performance with specific activities of 0.36 and 0.34 mA/cm 2 respectively. Additionally, formic acid oxidation reaction (FAOR) tests noted that both Pt and PtNi nanowires oxidize small organic molecules (SOMs) via an indirect pathway. CO oxidation data suggests little measurable performance without any pre-reduction treatment; however, after annealing in H 2 , we detected significantly improved CO 2 formation for both Pt 9 Ni 1 and Pt 7 Ni 3 motifs. These observations highlight the importance of pre-treating these nanowires under a reducing atmosphere to enhance their performance for CO oxidation. To explain these findings, we collected extended x-ray adsorption fine structure (EXAFS) spectroscopy data, consistent with the presence of partial alloying with a tendency for Pt and Ni to segregate, thereby implying the formation of a Pt-rich shell coupled with a Ni-rich core. Here, we also observed that the degree of alloying within the nanowires increased after annealing in a reducing atmosphere, a finding deduced through analysis of the coordination numbers and calculations of Cowley's short range order parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Understanding the Adsorption of Rare-Earth Elements in Oligo-Grafted Mesoporous Carbon

Rare-earth elements (REEs) are 17 elements of the periodic table primarily consisting of lanthanides. In modern society, the usage of REEs is ubiquitous in almost all modern gadgets and therefore efficient recovery and separation of REEs are of high importance. Selective adsorption and chelation of REEs in solid sorbents is a unique and sustainable process for their recovery. In this work, single-stranded oligos with 100 units of thymine were grafted onto carboxylated mesoporous carbon to synthesize a sorbent with phosphorus and oxygen functionalities. Additionally, the sorbent was characterized by X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and scanning electron microscopy-energy-dispersive X-ray spectroscopy. Three different REEs with varying atomic radii and densities, Lu, Dy, and La, were adsorbed onto the carbon from aqueous solutions. It was observed that the adsorbed amounts increased with the increase in the atomic radius or decrease in the atomic density. Calculation of the distribution coefficients for all the equilibrium adsorption amounts suggested that adsorption is more effective in the lower concentration region. The L 3 -edge X-ray absorption near-edge structure confirmed a 3+ oxidation state of REEs in the adsorbed phase. Extended X-ray absorption fine structure (EXAFS) confirmed the binding of REEs with oxygen functionalities in the adsorbed phase. The radial distribution functions calculated from the EXAFS data suggest a longer RE–O distance for La compared to those for Lu and Dy. The coordination numbers and Debye–Waller factors have typical values of about 8–9 atoms and 0.01–0.02 Å 2 , respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ligand-coordination effects on the selective hydrogenation of acetylene in single-site Pd-ligand supported catalysts

The selective hydrogenation of acetylene to ethylene is a critical step in the synthesis of polyethylenes. Achieving high conversion to ethylene without over-hydrogenation to ethane is a challenge that requires control of the transition metal site, which we achieve through a ligand-coordinated supported catalyst (LCSC) strategy. Using Pd catalysts coordinated to 1,10-phenanthroline-5,6-dione (PDO) ligands on CeO2 supports, we have discovered that the reaction selectivity depends strongly on the ligand:metal ratio with higher selectivity when more ligand is present in the catalyst. Catalyst structure was examined by extended X-ray absorption fine structure spectroscopy, transmission electron microscopy, and CO adsorption, which indicate single-atom character of the Pd. The ligand:metal ratio is determined by Xray photoelectron spectroscopy measurements and correlated with hydrogenation reactions under steady-state flow conditions to examine trends in hydrogenation activity and selectivity. Those trends can be better understood by density functional theory calculations that indicate hydrogen binding on the ligand to guide reaction selectivity toward the desired ethylene hydrogenation product. Here these results demonstrate the importance of considering the dynamic character of LCSCs and inform the design of future single-site heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Surface‐modified Ag@Ru‐P25 for photocatalytic CO 2 conversion with high selectivity over CH 4 formation at the solid–gas interface

Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO 2 reduction to solar fuels. A surface-modified Ag@Ru-P25 photocatalyst with H 2 O 2 treatment was designed in this study to convert CO 2 and H 2 O vapor into highly selective CH 4 . Ru doping followed by Ag nanoparticles (NPs) cocatalyst deposition on P25 (TiO 2 ) enhances visible light absorption and charge separation, whereas H 2 O 2 treatment modifies the surface of the photocatalyst with hydroxyl (–OH) groups and promotes CO 2 adsorption. High-resonance transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray absorption near-edge structure, and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst, while thermogravimetric analysis, CO 2 adsorption isotherm, and temperature programmed desorption study were performed to examine the significance of H 2 O 2 treatment in increasing CO 2 reduction activity. The optimized Ag 1.0 @Ru 1.0 -P25 photocatalyst performed excellent CO 2 reduction activity into CO, CH 4 , and C 2 H 6 with a ~95% selectivity of CH 4 , where the activity was ~135 times higher than that of pristine TiO 2 (P25). For the first time, this work explored the effect of H 2 O 2 treatment on the photocatalyst that dramatically increases CO 2 reduction activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Adsorption of Neodymium, Dysprosium, and Ytterbium to Goethite under Varying Aqueous Chemistry Conditions

The adsorption of rare earth elements (REEs) to iron oxides can regulate the mobility of REEs in the environment and is heavily influenced by water chemistry. This study utilized batch experiments to examine the adsorption of Nd, Dy, and Yb to goethite under varying pH, electrolyte (type and concentration), and concentrations of dissolved inorganic carbon and citrate. REE adsorption was strongly influenced by pH, with an increase from essentially no adsorption at pH 3.0 to nearly complete adsorption at pH 6.5 and higher. Citrate enhanced the adsorption of REEs at low pH (<5.0), likely by forming goethite-REE-citrate ternary surface complexes. However, citrate inhibited the adsorption of REEs at higher pH (>5.0) by forming aqueous REE-citrate complexes. Ionic strength had a small influence on REE adsorption, and the presence of dissolved inorganic carbon had no discernible effect. Equilibrium adsorption was interpreted with a triple-layer surface complexation model (SCM). The selection of surface complexation reactions was guided by extended X-ray absorption fine structure spectra. An SCM with a single bidentate inner-sphere surface complexation reaction for Nd and two inner-sphere surface complexation reactions (one monodentate and one bidentate reaction) for Dy and Yb effectively simulated adsorption across a broad range of conditions in the absence of citrate. Accounting for the effects of citrate on REE adsorption required the addition of up to two ternary REE-citrate-goethite surface complexes. The SCM can enable predictions of REE transport in subsurface environments that have goethite as an important adsorbent mineral. Furthermore, this predictive capability could contribute to identifying potential REE sources and facilitating efficient extraction of REEs.

58 GEOSCIENCES↗
DOE OSTI2021

In situ EXAFS study of Sr adsorption on TiO 2 (110) under high ionic strength wastewater conditions

In order to provide important details concerning the adsorption reactions of Sr, batch reactions and a set of both ex situ and in situ Grazing Incidence X-ray Absorption Fine Structure (GIXAFS) adsorption experiments were completed on powdered TiO 2 and on rutile(110), both reacted with either SrCl 2 or SrCO 3 solutions. TiO 2 sorption capacity for strontium (Sr) ranges from 550 ppm (SrCl 2 solutions, second order kinetics) to 1400 ppm (SrCO 3 solutions, first order kinetics), respectively, and is rapid. Sr adsorption decreased as a function of chloride concentration but significantly increased as carbonate concentrations increased. In the presence of carbonate, the ability of TiO 2 to remove Sr from the solution increases by a factor of ~4 due to rapid epitaxial surface precipitation of an SrCO 3 thin film, which registers itself on the rutile(110) surface as a strontianite-like phase (d-spacing 2.8 Å). Extended X-ray Absorption Fine Structure (EXAFS) results suggest the initial attachment is via tetradental inner-sphere Sr adsorption. Moreover, adsorbates from concentrated SrCl 2 solutions contain carbonate and hydroxyl species, which results in both inner- and outer-sphere adsorbates and explains the reduced Sr adsorption in these systems. These results not only provide new insights into Sr kinetics and adsorption on TiO 2 but also provide valuable information concerning potential improvements in effluent water treatment models and are pertinent in developing treatment methods for rutile-coated structural materials within nuclear power plants.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Adsorption of neodymium, dysprosium, and ytterbium to goethite under varying aqueous chemistry conditions [dataset]

The adsorption of rare earth elements (REEs) to iron oxides can regulate the mobility of REEs in the environment and is heavily influenced by water chemistry. This study utilized batch experiments to examine the adsorption of Nd, Dy, and Yb to goethite under varying pH, electrolyte (type and concentration), and concentrations of dissolved inorganic carbon and citrate. REE adsorption was strongly influenced by pH, with an increase from essentially no adsorption at pH 3.0 to nearly complete adsorption at pH 6.5 and higher. Citrate enhanced the adsorption of REEs at low pH (< 5.0), likely by forming goethite-REE-citrate ternary surface complexes. However, citrate inhibited the adsorption of REEs at higher pH (> 5.0) by forming aqueous REE-citrate complexes. Ionic strength had a small influence on REE adsorption, and the presence of dissolved inorganic carbon had no discernible effect. Equilibrium adsorption was interpreted with a triple layer surface complexation model (SCM). The selection of surface complexation reactions was guided by extended X-ray absorption fine structure spectra. A SCM with a single bidentate inner-sphere surface complexation reaction for Nd and two inner-sphere surface complexation reactions (one monodentate and one bidentate reaction) for Dy and Yb effectively simulated adsorption across a broad range of conditions in the absence of citrate. Accounting for the effects of citrate on REE adsorption required the addition of up to two ternary REE-citrate-goethite surface complexes. The SCM can enable predictions of REE transport in subsurface environments that have goethite as an important adsorbent mineral. This predictive capability could contribute to identifying potential REE sources and facilitating efficient extraction of REEs.

58 GEOSCIENCES↗
DOE OSTI2025

One-dimensional heterocyclic carbene–Au metal–organic frameworks bridging ultra-high vacuum models and scalable liquid-phase growth

The controlled design of molecule–metal interfaces is central to the development of functional nanomaterials for catalysis, sensing, and molecular electronics. Here we show that the adsorption of a Janus-type diimidazolium precursor on gold yields one-dimensional (1D) N-heterocyclic carbene (NHC)–Au–NHC metal organic frameworks (MOFs) featuring positively charged gold nodes. Using synchrotron X-ray photoemission spectroscopy (XPS), near edge X-ray adsorption fine structure (NEXAFS) spectroscopy and scanning tunnelling microscopy (STM), we demonstrate that thermal activation promotes counterion removal and drives the formation of extended 1D arrays, characterized by ∼1.0 nm Au–Au spacing and adatom densities up to 0.6 atom nm −2 (∼4% of surface atoms). Importantly, we translate this ultra-high vacuum (UHV) benchmark into a scalable solution-phase protocol in ethanol, enabling 1D-MOF growth under mild, base-free, open-air conditions. The resulting films retain structural and electronic signatures of UHV-grown systems, bridging model studies and practical synthesis. This approach establishes NHC–metal frameworks as accessible, tunable platforms for catalysis and materials design.

Gold adatoms↗
DOE OSTI2023

Adsorption of rare earth elements in carboxylated mesoporous carbon

The separation of Rare Earth Elements (REEs) from various non-conventional sources is critically important to maintain the supply–demand balance of REEs in the western world. Here, in this research, we have investigated coal Fly Ash (CFA) as the non-conventional source of REEs. In order to recover REEs, we have synthesized carboxylate-functionalized mesoporous carbon (CMC) to harness the chelation-induced adsorption of REEs. These adsorbents were characterized with pore textural properties, FTIR spectroscopy, and SEM-EDX mapping. In the initial study with single-component La(III) Dy(III) and Lu(III), it was revealed that CMC can adsorb those REEs 2–4 times more than that of pristine mesoporous carbon confirming the effective role of the carboxylate group in the REE separation. Furthermore, the affiliation of the carboxylate group towards heavier REEs (Lu>Dy>La, when present is equal amounts) provides an added benefit of this adsorbent owing to the high demand for heavier REEs in the technology sectors. The leachate solution produced from CFA contained sixteen REEs in the range of 50–200 ppb for most of the REEs. It was revealed that CMC can extract 80–90% of all the REEs thereby further confirming the success of the CMC as an effective REE sorbent. Three successive cycles of adsorption and desorption of REEs with the same CMC revealed the consistent adsorption capacity of REEs. In-situ X-ray Absorption Near Edge Spectroscopy (XANES) analysis confirmed the +3 oxidation states of La, Dy, and Lu within CMC. In-situ Extended X-ray Absorption Fine Structure (EXAFS) analysis revealed the shortening of mean La-O, Dy-O, and Lu-O bond distance by 0.03–0.05 Å thereby confirming the coordination of these REEs with carboxylate groups present on CMC.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Pd-Ru pair on Pt surface for promoting hydrogen oxidation and evolution in alkaline media

Hydrogen oxidation reaction in alkaline media is critical for alkaline fuel cells and electrochemical ammonia compressors. The slow hydrogen oxidation reaction in alkaline electrolytes requires large amounts of scarce and expensive platinum catalysts. While transition metal decoration can enhance Pt catalysts’ activity, it often reduces the electrochemical active surface area, limiting the improvement in Pt mass activity. Here, we enhance Pt catalysts’ activity without losing surface-active sites by using a Pd-Ru pair. Utilizing a mildly catalytic thermal pyrolysis approach, Pd-Ru pairs are decorated on Pt, confirmed by extended X-ray absorption fine structure and high-angle annular dark-field scanning transmission electron microscopy. Density functional theory and ab-initio molecular dynamics simulations indicate preferred Pd and Ru dopant adsorption. The Pd-Ru decorated Pt catalyst exhibits a mass-based exchange current density of 1557 ± 85 A g –1 metal for hydrogen oxidation reaction, demonstrating superior performance in an ammonia compressor.

25 ENERGY STORAGE↗
DOE OSTI2022

In Situ XAFS, XRD, and DFT Characterization of the Sulfur Adsorption Sites on Cu and Ce Exchanged Y Zeolites

Adsorptive desulfurization with Cu and Ce ion-exchanged Y zeolite (CuCeY) has proven to be an effective method for the removal of sulfur compounds from hydrocarbon fuels. In this study, Cu and Ce exchanged Y materials including CuY, CeY, and CuCeY were prepared and examined to investigate the mechanism behind the superior sulfur adsorption and selectivity of CuCeY. In situ conditions were used to study the materials as prepared for optimal desulfurization. X-ray diffraction (XRD) confirmed the absence of large well-ordered crystalline phases from metallic or oxide Cu and Ce after the reduction of the samples. The oxidation states and local environments of Cu and Ce were determined using X-ray adsorption fine structure (XAFS) analysis and correlated to theoretical findings obtained from density functional theory (DFT) calculations. XAFS data indicate the successful reduction of Cu species to Cu + and Cu o , and Ce to Ce 3+ . Analysis of XAFS spectra located Cu and Ce within the Y zeolite framework with Cu cations in the six-member ring sites and as small metallic Cu clusters. Ce cations were found to occupy both six-member ring and hexagonal prism sites. Furthermore, these results reveal the structure of CuCeY as prepared for desulfurization and provide insight into its superior sulfur adsorption performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mechanistic Insights into Adsorptive and Catalytic Reactions from Controllable Distributions of Metal Cations (Pd, Pt, Ni, Cr, Cu) as [M‐OH] +1 /1Al or M +2 /2Al in Zeolites

Anchoring divalent metal ions in the same zeolite framework with similar Si/Al ratio selectively as zeolite-bound M +2 or [M +2 -OH] +1 cationic species enables critical comparison of the species’ intrinsic reactivity for industrially and fundamentally relevant reactions. H-BEA zeolites with similar Si/Al ratios but differing framework Al siting were used to anchored multiple divalent metal cations (Ni, Pd, Pt, Cr, Cu) in the zeolite micropores. State-of-the-art infrared (IR) spectroscopy, electron paramagnetic resonance (EPR) measurements, including two-dimensional pulsed HYSCORE EPR, extended X-ray absorption fine structure (EXAFS), and density functional theory (DFT) calculations together provide unambiguous evidence for the selective formation of divalent metal cations as M +2 /2Al species (for H-BEA prepared in the conventional hydroxide media), and [M +2 OH] +1 /1Al species for H-BEA prepared in HF. Solid-state proton-decoupled triple-quantum magic-angle spinning (3Q MAS) NMR measurements confirmed contrasting Al distributions in the two H-BEA zeolites, which led to a contrasting divalent cation speciation. The reactivities of the two cationic species were explored for catalytic and adsorptive applications in both organometallic homogeneous and heterogeneous catalysis. This work demonstrates their divergent reactivity in ethylene dimerization, ethylene oxidation (Wacker process), selective catalytic reduction (SCR) of NO, NO adsorption, and methane oxidation. Both M +2 /2Al and [M +2 OH] +1 /1Al cations are both active for ethylene dimerization, but [M +2 OH] +1 /1Al species show higher reaction rates for each Pd, Ni, Pt. [M +2 OH] +1 /1Al is active for acetaldehyde formation in Wacker ethylene oxidation. A new active site for ethylene oligomerization is proposed that possesses a terminal OH group (Cr-OH) in Phillips catalysts evident by a nearly inactive isolated Cr +2 /2Al species that contrast an active Cr─OH motif.

Divalent metal cations in a zeolite↗
DOE OSTI2023

Non-bonding interaction of dual atom catalysts for enhanced oxygen reduction reaction

Here, we demonstrate the design of graphene-supported dual atom catalysts (DACs) for the four-electron oxygen reduction reaction (ORR), by utilizing the non-bonding interaction of counterpart metals (M) that synergistically tune the electronic properties and catalytic activity of the Fe active site in FeMN 6 -DAC and FeMN 8 -DAC systems, where M stands for Fe, Co, Ni, Cu, and Zn. More specifically, for Fe-M distances below 15Å, the non-bonding interaction is significant, making the system act as the DAC. We predicted that FeNiN 6 -DAC and FeNiN 8 -DAC exhibit a low ORR overpotential (η ORR ) of 0.28 V and 0.47 V, respectively, which are at the summits of volcano plots. This low η ORR originates from the high Bader charge transfer coupled with high spin density at the Fe site in both the FeNiN 6 -DAC and FeNiN 8 -DAC systems, which weakens the adsorption of OH* intermediate while enhancing its desorption to H 2 O. Guided by these density functional theory (DFT) computational results, we synthesized FeCoN 8 -DAC and FeNiN 8 -DAC along with N-doped graphene and confirmed their structures with scanning transmission electron microscopy (STEM), X-ray photoelectron spectroscopy (XPS), X-ray absorption near-edge structure (XANES), extended X-ray absorption fine structure (EXAFS), and electron spin resonance (ESR). We verify experimentally the catalytic activities and find that FeNiN 8 -DAC has the low experimental overpotential of 0.39 V with a Tafel slope of 47 mVdec -1 . Based on these results, we propose a DFT-guided strategy to tune the charge transfer and spin population of the active site toward designing DACs for electrochemical ORR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structural incorporation into goethite fractionates rare earth elements

Up to 20% of rare earth elements (REEs) in ion adsorption deposits (IADs) are associated with iron oxide minerals, primarily goethite. Often termed “non-extractable”, goethite-hosted REEs are thought to be structurally incorporated into the mineral lattice. The large mismatch in size and charge density between REEs (ionic radius, r = 0.86–1.03 Å) and Fe 3+ (r = 0.65 Å), however, makes direct substitution energetically unfavorable. To determine REE compatibility with and incorporation into goethite on the atomic level, we used X-ray pair distribution function analysis (PDF) and LIII-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. The compatibility of REEs with goethite and the precursor ferrihydrite (FH) is Lu ≥ Yb ≫ Dy > Nd for both phases. Nd and Dy primarily form secondary amorphous phases, with <30% Nd and Dy incorporated into goethite. In the FH precursor at pH 6.8, Yb and Lu assumed a local REE-OOH like structure with next nearest neighbor Fe. The Yb, Lu, and Nd-FH samples were also matured at ambient conditions for 100 days; despite the presence of only ∼5% goethite, Lu and Yb were 42% and 100% in goethite-like structural environments, respectively, whereas the PDF and EXAFS of Nd showed little evidence of any incorporation. Using ab initio molecular dynamics (AIMD) to model the EXAFS, we determined the presence of protonated Fe vacancies, edge-sharing with structural Lu and Yb, likely helped accommodate these REEs in the goethite structure. Incorporation into Fe oxyhydroxides thus potentially fractionates the REEs during weathering associated with formation of lateritic and ion adsorption deposits.

Mergelsberg, Sebastian T. [Pacific Northwest Natio↗
DOE OSTI2022

Vanadate Retention by Iron and Manganese Oxides

Anthropogenic emissions of vanadium (V) into terrestrial and aquatic surface systems now match those of geogenic processes, and yet, the geochemistry of vanadium is poorly described in comparison to other comparable contaminants like arsenic. In oxic systems, V is present as an oxyanion with a +5 formal charge on the V center, typically described as H x VO 4 (3–x)– , but also here as V(V). Iron (Fe) and manganese (Mn) (oxy)hydroxides represent key mineral phases in the cycling of V(V) at the solid–solution interface, and yet, fundamental descriptions of these surface-processes are not available. Here, we utilize extended X-ray absorption fine structure (EXAFS) and thermodynamic calculations to compare the surface complexation of V(V) by the common Fe and Mn mineral phases ferrihydrite, hematite, goethite, birnessite, and pyrolusite at pH 7. Inner-sphere V(V) complexes were detected on all phases, with mononuclear V(V) species dominating the adsorbed species distribution. Our results demonstrate that V(V) adsorption is exergonic for a variety of surfaces with differing amounts of terminal –OH groups and metal–O bond saturations, implicating the conjunctive role of varied mineral surfaces in controlling the mobility and fate of V(V) in terrestrial and aquatic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Revealing Structural Evolution of Nickel Phosphide-Iron Oxide Core–Shell Nanocatalysts in Alkaline Medium for the Oxygen Evolution Reaction

Metal phosphide-containing materials have emerged as a potential candidate of non-precious metal-based catalysts for alkaline oxygen evolution reaction (OER). While it is known that metal phosphide undergoes structural evolution, considerable debate persists regarding the effects of dynamics on the surface activation and morphological stability of the catalysts. In this study, we synthesize NiP x -FeO x core-shell nanocatalysts with an amorphous NiP x core designed for enhanced OER activity. Using ex-situ X-ray absorption spectroscopy, we elucidate the local structural changes as a function of cyclic voltammetry cycles. Our studies suggest that the presence of corner-sharing octahedra in the FeO x shell improves structural rigidity through interlayer cross-linking, thereby inhibiting the diffusion of OH - /H 2 O. Thus, the FeO x shell preserves the amorphous NiP x core from rapid oxidation to Ni 3 (PO 4 ) 2 and Ni(OH) 2 . On the other hand, the incorporation of Ni from the core into the FeO x shell facilitates absorption of hydroxide ions for OER. As a result, the Ni/Fe(OH) x at the surface oxidizes to the active γ-(oxy)hydroxide phase under the applied potentials, promoting OER. This intriguing synergistic behavior holds significance as such synthetic route involving the FeO x shell can be extended to other systems, enabling manipulation of surface adsorption and diffusion of hydroxide ions. These findings also demonstrate that nanomaterials with core-shell morphology can be tuned to leverage the strength of each metallic component for improved electrochemical activities.

25 ENERGY STORAGE↗