Search NASA⌕ Search

SEARCH · Search NASA

Results for “extra”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Dynamics and Origin of Extra-solar Planetary Systems and Microlensing Detection of Extra-solar Planets

We compare a space-based microlensing search for planets, with a ground based microlensing search originally proposed by D. Tytler (Beichman, et al. 1996). Perturbations of microlensing light curves when the lens star has a planetary companion are sought by one wide angle survey telescope and an array of three or four followup narrow angle telescopes distributed in longitude that follow events with high precision, high time resolution photometry. Alternative ground based programs are considered briefly. With the four 2 meter telescopes distributed in longitude in the southern hemisphere in the Tytler proposal, observational constraints on a ground-based search for planets during microlensing events toward the center of the galaxy are severe. Probably less than 100 events could be monitored per year with high precision, high time resolution photometry with only about 42% coverage on the average regardless of how many events were discovered by the survey telescope. Statistics for the occurrence and properties for Jupiter-mass planets would be meaningful but relatively meager four years after the program was started, and meaningful statistics for Earth-mass planets would be non existent. In contrast, the 14,500 events in a proposed 4 year space based program (GEST = Galactic Exoplanet Survey Telescope) would yield very sound statistics on the occurrence, masses and separations of Jupiter-mass planets, and significant constraints on similar properties for Earth-mass planets. The significance of the Jupiter statistics would be to establish the frequency of planetary systems like our own, where terrestrial planets could exist inside the orbits of the giants.

Peale, S. J.↗
NASA NTRSDate not supplied

A Review of Extra-Terrestrial Regolith Excavation Concepts and Prototypes

Regolith is present on many extra-terrestrial bodies, and the crushed rock material it is made of contains many of the resources that are enabling for In-Situ Resource Utilization (ISRU). When extracted, these resources can be used to provide consumables such as rocket propellant, human life support, working fluids and gases for industrial processes and feedstocks for manufacturing. In addition, the regolith can also be very beneficial for construction purposes as an aggregate which can be used for construction materials and shielding for radiation protection and micrometeorite impact. Binders for regolith concrete may also be made from geopolymers that may be in the regolith. The regolith can be melted and drawn out into glass fibers and used as reinforcements in a metal, polymer, or concrete matrix. In addition, there is tremendous scientific and geological knowledge that can only be obtained by studying samples of the regolith. However, none of these valuable activities can proceed without first acquiring the regolith granular material with some type of excavation device and method. Excavation is in the critical path of many workflows that will make up the capabilities required to establish a human and robotic presence in our solar system. While scientific in-situ sampling of regolith in small quantities has been achieved since the dawn of the space age in the 1960’s, large scale excavation for mining and construction on extra-terrestrial bodies has only been contemplated, for many decades, but serious development and prototyping of excavation technologies for use in reduced gravity space environments was only started in the late 1990’s. This paper will review and document the evolution of extra-terrestrial excavation concepts and prototypes based on the available literature and the personal experience of the author who has been working on regolith excavation technology development since 1998.

Regolith↗
NASA NTRSDate not supplied

A Review of Extra-Terrestrial Regolith Excavation Concepts and Prototypes

Regolith is present on many extra-terrestrial bodies, and the crushed rock material it is made of contains many of the resources that are enabling for In-Situ Resource Utilization (ISRU). When extracted these resources can be used to provide consumables such as rocket propellant, human life support, working fluids and gases for industrial processes and feedstocks for manufacturing. In addition, the regolith can also be very beneficial for construction purposes as an aggregate which can be used for construction materials and shielding for radiation protection and micrometeorite impact. Binders for regolith concrete may also be made from geopolymers that may be in the regolith. The regolith can be melted and drawn out into glass fibers and used as reinforcements in a metal, polymer, or concrete matrix. In addition, there is tremendous scientific and geological knowledge that can only be obtained by studying samples of the regolith. However, none of these valuable activities can proceed without first acquiring the regolith granular material with some type of excavation device and method. Excavation is in the critical path of many workflows that will make up the capabilities required to establish a human and robotic presence in our solar system. While scientific in-situ sampling of regolith in small quantities has been achieved since the dawn of the space age in the 1960’s, large scale excavation for mining and construction on extra-terrestrial bodies has only been contemplated for many decades in works of scientific fact and also in fictional stories, but serious development and prototyping of excavation technologies for use in reduced gravity space environments was only started in the late 1990’s.This paper will review and document the evolution of extra-terrestrial excavation concepts and prototypes based on the available literature and the personal experience of the author who has been working on regolith excavation technology development since 1998.

ISRU↗
NASA NTRSDate not supplied

A Review of Extra-Terrestrial Regolith Excavation Concepts and Prototype

Regolith is present on many extra-terrestrial bodies, and the crushed rock material it is made of contains many of the resources that are enabling for In-Situ Resource Utilization (ISRU). When extracted, these resources can be used to provide consumables such as rocket propellant, human life support, working fluids and gases for industrial processes and feedstocks for manufacturing. In addition, the regolith can also be very beneficial for construction purposes as an aggregate which can be used for construction materials and shielding for radiation protection and micrometeorite impact. Binders for regolith concrete may also be made from geopolymers that may be in the regolith. The regolith can be melted and drawn out into glass fibers and used as reinforcements in a metal, polymer, or concrete matrix. In addition, there is tremendous scientific and geological knowledge that can only be obtained by studying samples of the regolith. However, none of these valuable activities can proceed without first acquiring the regolith granular material with some type of excavation device and method. Excavation is in the critical path of many workflows that will make up the capabilities required to establish a human and robotic presence in our solar system. While scientific in-situ sampling of regolith in small quantities has been achieved since the dawn of the space age in the 1960’s, large scale excavation for mining and construction on extra-terrestrial bodies has only been contemplated, for many decades, but serious development and prototyping of excavation technologies for use in reduced gravity space environments was only started in the late 1990’s. This paper will review and document the evolution of extra-terrestrial excavation concepts and prototypes based on the available literature and the personal experience of the author who has been working on regolith excavation technology development since 1998.

Regolith↗
NASA NTRS1982

A preliminary analysis of lunar extra-mare basalts - Distribution, compositions, ages, volumes, and eruption styles

Extra-mare basalts occupy 8.5% of the lunar basalt area and comprise 1% of the total mare basalt volume. They are preferentially located where the crust is thin and topographically low. In terms of age, eruption style, and composition they are as variable as the mare basalts. In some instances extrusion in extra-mare craters was preceded by floor-fracturing whereas in other cases it apparently was not. The volume of lava erupted may have been controlled more by the volume of magma produced than by hydrostatic effects. A minimum of nearly 1300 separate basalt eruptions is indicated; the true value could be nearer 30,000 separate eruptions.

Whitford-Stark, J. L.↗
NASA NTRS1991

Hubble Extra Solar Planet Interferometer

This paper describes a proposed third-generation Hubble instrument for extra-solar planet detection, the Hubble Extra-Solar Planet Interferometer (HESPI). This instrument would be able to achieve starlight cancellation at the 10 exp 6 to 10 exp 8 level, given a stellar wavefront with phase errors comparable to the present Hubble telescope wavefront. At 10 exp 6 starlight cancellation, HESPI would be able to detect a Jupiter-like planet next to a star at a distance of about 10 parsec, for which there are about 400 candidate stars. This paper describes a novel approach for starlight suppression, using a combination of active control and single-mode spatial filters, to achieve starlight suppression far below the classical limit set by scattering due to microsurface imperfections. In preliminary lab experiments, suppression by a factor of 40 below the classical scatter limit due to optical wavefront errors has been demonstrated.

Shao, M.↗
NASA NTRS1992

Loss of Prostaglandin E2-induced Extra Cortical Bone After its Withdrawal in Rats

The object of this study was to determine the fate of PGE2-(Prostaglandin E2) induced new cortical bone mass after withdrawal of PGE2 administration. Seven-month-old male Sprague-Dawley rats were given subcutaneous injections of 1, 3 and 6 mg PGE2/kg/day for 60 days and then withdrawn for 60 and 120 days (on/off treatment). Histomorphometric analyses were performed on double-fluorescent-labeled undecalcified tibial shaft sections (proximal to the tibiofibular junction). In a previous report we showed that after 60, 120 and 180 days of daily PGE2 (on)treatment, a new steady state was achieved marked by increased total bone area (+16%, +25% and +34% with 1, 3 and 6 mg PGE2/kg/day) when compared to age-matched controls. The continuous PGE2 treatment stimulated periosteal and endocortical lamellar bone formation, activated endocortical woven trabecular bone formation and intracortical bone resorption. These responses increased cortical bone mass since the bone formation exceeded bone resorption. The current study showed that after withdrawal of PGE2 for 60 and 120 days, the extra endocortical bone, which was induced by the first 60-days treatment, was resorbed, but the new subperiosteal bone persisted resulting in a tibial shaft with larger cross sectional and marrow areas. Despite that, there was still the same amount of bone mass in these shafts as in age-related controls. A new steady state was achieved after 60 days of withdrawal, in which the bone mass and bone formation activity approximated that of age-related controls. It was concluded that maintaining the extra PGE2-induced cortical bone mass depends on continuous daily administration of PGE2.

Jee, Webster S. S.↗
NASA NTRS1992

Prostaglandin E2 Prevents Bone Loss and Adds Extra Bone to Immobilized Distal Femoral Metaphysis in Female Rats

The object of this study was to determine whether prostaglandin E2 (PGE2) can prevent disuse (underloading)-induced cancellous bone loss. Thirteen-month-old retired female Sprague-Dawley breeders served as controls or were subjected to right hindlimb immobilization by bandaging and simultaneously treated subcutaneously daily with 0, 1, 3, or 6 mg PGE2/kg/d for two and six weeks. Histomorphometric analyses were performed on the cancellous bone using double-fluorescent labeled, 20 micron thick, undecalcified distal femoral metaphysis sections. We found that PGE2 administration not only prevented disuse-induced bone loss, but also added extra bone to disuse cancellous bone in a dose-response manner. PGE2 prevented the disuse-induced osteopenia by stimulating more bone formation than and shortening the period of bone remodeling. It activated woven bone formation, stimulated lamellar bone formation, and increased the eroded bone surface above that caused by disuse alone. While underloading increased the remodeling period (sigma), PGE2 treatment of underloaded bone shortened the time for osteoclastic bone resorption and bone remodeling, and thus reduced the remodeling space. The study shows that PGE2 is a powerful anabolic agent that prevents disuse-induced osteopenia and adds extra bone to these same bones.

Akamine, T.↗
NASA NTRS1992

Loss of Prostaglandin E2-induced Extra Cortical Bone after its Withdrawal in Rats

The object of this study was to determine the fate of PGE2-induced new cortical bone mass after withdrawal of PGE2 administration. Seven-month-old male Sprague-Dawley rats were given subcutaneous injections of 1, 3 and 6 mg PGE2/kg/day for 60 days and then withdrawn for 60 and 120 days (on/off treatment). Histomorphometric analyses were performed on double-fluorescent-labeled undecalcified tibial shaft sections (proximal to the tibiofibular junction). In a previous report we showed that after 60, 120 and 180 days of daily PGE2 (on)treatment, a new steady state was achieved marked by increased total bone area (+ 16%, +25% and + 34% with 1, 3 and 6 mg PGE2/kg/day) when compared to age-matched controls. The continuous PGE2 treatment stimulated periosteal and endocortical lamellar bone formation, activated endocortical woven trabecular bone formation and intracortical bone resorption. These responses increased cortical bone mass since the bone formation exceeded bone resorption. The current study showed that after withdrawal of PGE2 for 60 and 120 days, the extra endocortical bone, which was induced by the first 60-days treatment, was resorbed, but the new subperiosteal bone persisted resulting in a tibial shaft with larger cross sectional and marrow areas. Despite that, there was still the same amount of bone mass in these shafts as in age-related controls. A new steady state was achieved after 60 days of withdrawal, in which the bone mass and bone formation activity approximated that of age-related controls. It was concluded that maintaining the extra PGE2-induced cortical bone mass depends on continuous daily administration of PGE2.

Jee, Webster S. S.↗
NASA NTRS2004

Extra Solar Planetary Imaging Coronagraph and Science Requirements for the James Webb Telescope Observatory

1) Extra solar planetary imaging coronagraph. Direct detection and characterization of Jovian planets, and other gas giants, in orbit around nearby stars is a necessary precursor to Terrestrial Planet Finder 0 in order to estimate the probability of Terrestrial planets in our stellar neighborhood. Ground based indirect methods are biased towards large close in Jovian planets in solar systems unlikely io harbor Earthlike planets. Thus to estimate the relative abundances of terrestrial planets and to determine optimal observing strategies for TPF a pathfinder mission would be desired. The Extra-Solar Planetary Imaging Coronagraph (EPIC) is such a pathfinder mission. Upto 83 stellar systems are accessible with a 1.5 meter unobscured telescope and coronagraph combination located at the Earth-Sun L2 point. Incorporating radiometric and angular resolution considerations show that Jovians could be directly detected (5 sigma) in the 0.5 - 1.0 micron band outside of an inner working distance of 5/D with integration times of -10 - 100 hours per observation. The primary considerations for a planet imager are optical wavefront quality due to manufacturing, alignment, structural and thermal considerations. pointing stability and control, and manufacturability of coronagraphic masks and stops to increase the planetary-to- stellar contrast and mitigate against straylight. Previously proposed coronagraphic concepts are driven to extreme tolerances. however. we have developed and studied a mission, telescope and coronagraphic detection concept, which is achievable in the time frame of a Discovery class NASA mission. 2) Science requirements for the James Webb Space Telescope observatory. The James Webb Space Observatory (JWST) is an infrared observatory, which will be launched in 201 1 to an orbit at L2. JWST is a segmented, 18 mirror segment telescope with a diameter of 6.5 meters, and a clear aperture of 25 mA2. The telescope is designed to conduct imaging and spectroscopic observations from 0.6-27 microns. The primary mirror find and understand predicted first light objects, observe galaxies back to their earliest precursors so that we can understand their growth and evolution, unravel the birth and early evolution of stars and planetary systems, and study planetary systems and the origins of life. In this paper we discuss the science goals for JWST in the context of the performance requirements they levy on the observatory.

Clampin, Mark↗
NASA NTRS2004

Personal Cooling for Extra-Vehicular Activities on Mars

Extra-vehicular activities (EVA) on Mars will require suits with sophisticated thermal control systems so that astronauts can work comfortably for extended periods of time. Any use of consumables such as water that cannot be easily replaced should be of particular concern. In this aspect the EVA suits for Mars environment need to be different from the current Space Shuttle Extra Vehicular Mobility Units (EMU) that depend on water sublimation into space for removing heat from suits. Moreover, Mars environment is quite different from what a typical EMU may be exposed to. These variations call for careful analysis and innovative engineering for design and fabrication of an appropriate thermal control system. This paper presents a thermal analysis of astronaut suits for EVA with medium metabolic intensity under a typical hot and a nominal cold environment on Mars. The paper also describes possible options that would allow conservation of water with low usage of electrical power. The paper then presents the conceptual design of a portable cooling unit for one such solution.

Pu, Zhengxiang↗
NASA NTRS2004

Personal Cooling for Extra-Vehicular Activities on Mars

Extra-vehicular activities (EVA) on Mars will require suits with sophisticated thermal control systems so that astronauts can work comfortably for extended periods of time. Any use of consumables such as water that cannot be easily replaced should be of particular concern. In this aspect the EVA suits for Mars environment need to be different from the current Space Shuttle Extra Vehicular Mobility Units (EMU) that depend on water sublimation into space for removing heat from suits. Moreover, Mars environment is quite different from what a typical EMU may be exposed to. These variations call for careful analysis and innovative engineering for design and fabrication of an appropriate thermal control system. This paper presents a thermal analysis of astronaut suits for EVA with medium metabolic intensity under a typical hot and a nominal cold environment on Mars. The paper also describes possible options that would allow conservation of water with low usage of electrical power. The paper then presents the conceptual design of a portable cooling unit for one such solution.

Pu, Zhengxiang↗
NASA NTRS2012

Limits on Large Extra Dimensions Based on Observations of Neutron Stars with the Fermi-LAT

We present limits for the compactification scale in the theory of Large Extra Dimensions (LED) proposed by Arkani-Hamed, Dimopoulos, and Dvali. We use 11 months of data from the Fermi Large Area Telescope (Fermi-LAT) to set gamma ray flux limits for 6 gamma-ray faint neutron stars (NS). To set limits on LED we use the model of Hannestad and Raffelt (HR) that calculates the Kaluza-Klein (KK) graviton production in supernova cores and the large fraction subsequently gravitationally bound around the resulting NS. The predicted decay of the bound KK gravitons to should contribute to the flux from NSs. Considering 2 to 7 extra dimensions of the same size in the context of the HR model, we use Monte Carlo techniques to calculate the expected differential flux of gamma-rays arising from these KK gravitons, including the effects of the age of the NS, graviton orbit, and absorption of gamma-rays in the magnetosphere of the NS. We compare our Monte Carlo-based differential flux to the experimental differential flux using maximum likelihood techniques to obtain our limits on LED. Our limits are more restrictive than past EGRET-based optimistic limits that do not include these important corrections. Additionally, our limits are more stringent than LHC based limits for 3 or fewer LED, and comparable for 4 LED. We conclude that if the effective Planck scale is around a TeV, then for 2 or 3 LED the compactification topology must be more complicated than a torus.

Ferrara, E. C.↗
NASA NTRS2016

Experiences with Extra-Vehicular Activities in Response to Critical ISS Contingencies

The maturation of the International Space Station (ISS) design from the proposed Space Station Freedom to today's current implementation resulted in external hardware redundancy vulnerabilities in the final design. Failure to compensate for or respond to these vulnerabilities could put the ISS in a posture to where it could no longer function as a habitable space station. In the first years of ISS assembly, these responses were to largely be addressed by the continued resupply and Extra-Vehicular Activity (EVA) capabilities of the Space Shuttle. Even prior to the decision to retire the Space Shuttle, it was realized that ISS needed to have its own capability to be able to rapidly repair or replace external hardware without needing to wait for the next cargo resupply mission. As documented in a previous publicatoin5, in 2006 development was started to baseline Extra- Vehicular Activity (EVA, or spacewalk) procedures to replace hardware components whose failure would expose some of the ISS vulnerabilities should a second failure occur. This development work laid the groundwork for the onboard crews and the ground operations and engineering teams to be ready to replace any of this failed hardware. In 2010, this development work was put to the test when one of these pieces of hardware failed. This paper will provide a brief summary of the planning and processes established in the original Contingency EVA development phase. It will then review how those plans and processes were implemented in 2010, highlighting what went well as well as where there were deficiencies between theory and reality. This paper will show that the original approach and analyses, though sound, were not as thorough as they should have been in the realm of planning for next worse failures, for documenting Programmatic approval of key assumptions, and not pursuing sufficient engineering analysis prior to the failure of the hardware. The paper will further highlight the changes made to the Contingency EVA preparation team structure, approach, goals, and the resources allocated to its work after the 2010 events. Finally, the authors will overview the implementation of these updates in addressing failures onboard the ISS in 2012, 2013, and 2014. The successful use of the updated approaches, and the application of the approaches to other spacewalks, will demonstrate the effectiveness of this additional work and make a case for putting significant time and resources into pre-failure planning and analysis for critical hardware items on human-tended spacecraft.

Van Cise, E. A.↗
NASA NTRS2016

Experiences with Extra-Vehicular Activities in Response to Critical ISS Contingencies

The maturation of the International Space Station (ISS) design from the proposed Space Station Freedom to today's current implementation resulted in external hardware redundancy vulnerabilities in the final design. Failure to compensate for or respond to these vulnerabilities could put the ISS in a posture where it could no longer function as a habitable space station. In the first years of ISS assembly, these responses were to largely be addressed by the continued resupply and Extra-Vehicular Activity (EVA) capabilities of the Space Shuttle. Even prior to the decision to retire the Space Shuttle, it was realized that ISS needed to have its own capability to be able to rapidly repair or replace external hardware without needing to wait for the next cargo resupply mission. As documented in a previous publication, in 2006 development was started to baseline Extra-Vehicular Activity (EVA, or spacewalk) procedures to replace hardware components whose failure would expose some of the ISS vulnerabilities should a second failure occur. This development work laid the groundwork for the onboard crews and the ground operations and engineering teams to be ready to replace any of this failed hardware. In 2010, this development work was put to the test when one of these pieces of hardware failed. This paper will provide a brief summary of the planning and processes established in the original Contingency EVA development phase. It will then review how those plans and processes were implemented in 2010, highlighting what went well as well as where there were deficiencies between theory and reality. This paper will show that the original approach and analyses, though sound, were not as thorough as they should have been in the realm of planning for next worse failures, for documenting Programmatic approval of key assumptions, and not pursuing sufficient engineering analysis prior to the failure of the hardware. The paper will further highlight the changes made to the Contingency EVA preparation team structure, approach, goals, and the resources allocated to its work after the 2010 events. Finally, the authors will overview the implementation of these updates in addressing failures onboard the ISS in 2012, 2013, and 2014. The successful use of the updated approaches, and the application of the approaches to other spacewalks, will demonstrate the effectiveness of this additional work and make a case for putting significant time and resources into pre-failure planning and analysis for critical hardware items on human-tended spacecraft.

Van Cise, E. A.↗
NASA NTRS2016

Intra-Extra Vehicular Activity Apollo Spacesuits

Kenneth Thomas will discuss the Apollo Intra-Extra Vehicular Activity (IEVA) spacesuits, which supported launch and reentry and extra-vehicular activity. This program was NASA's first attempt to develop a new suit design from requirements and concepts. Mr. Thomas will chronicle the challenges, developments, struggles, and solutions that culminated in the system that allowed the first human exploration of the Moon and deep space (outside low-Earth orbit). Apollo pressure suit designs allowed the heroic repair of the Skylab space station and supported the first U.S. and Russian spacecraft docking during the Apollo Soyuz Test Project. Mr. Thomas will also discuss the IEVA suits' successes and challenges associated with the IEVA developments of the 1960s.

Thomas, Kenneth S.↗
NASA NTRS2016

Intra-Extra Vehicular Activity (IEVA) Russian and Gemini Spacesuits

Kenneth Thomas will discuss the Intra-Extra Vehicular Activity Russian and Gemini spacesuits. While the United States and Russia adapted to existing launch- and reentry-type suits to allow the first human ventures into the vacuum of space, there were differences in execution and capabilities. Mr. Thomas will discuss the advantages and disadvantages of this approach compared to exclusively intra-vehicular or extra-vehicular suit systems.

Thomas, Kenneth S.↗
NASA NTRS2016

Questions and Answers for Ken Thomas' "Intra-Extra Vehicular Activity Russian and Gemini Spacesuits" Presentation

Kenneth Thomas will discuss the Intra‐Extra Vehicular Activity Russian & Gemini spacesuits. While the United States and Russia adapted to existing launch‐ and reentry‐type suits to allow the first human ventures into the vacuum of space, there were differences in execution and capabilities. Mr. Thomas will discuss the advantages and disadvantages of this approach compared to exclusively intravehicular or extra‐vehicular suit systems.

Thomas, Kenneth S.↗