Ionization of excited atomic hydrogen by fast electrons
Fast electron calculations for atomic hydrogen excited state ionization
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Fast electron calculations for atomic hydrogen excited state ionization
Abstract A new method to obtain the mean energy of fast electron losses in fusion plasmas using a versatile multi-energy hard x-ray (HXR) detector is presented. The method is based on measuring the thick-target emission of tungsten in the divertor region produced by fast electron losses interacting with the target and modeling the tungsten spectra by a Monte Carlo code which simulates the interaction between a beam of electrons and a solid target. The mean energy of the fast electron losses is determined through the comparison between the experimental and synthetic emission. The results show that fast electron losses during lower hybrid current drive discharges at WEST have a mean energy of 90–140 keV and represent only 2% of the total heat flux at the target. Additionally, anisotropic HXR emission has been detected for the first time at the WEST core and edge plasma, with opposite directions. It is due to the forward-peak emission of two distinctive populations of fast electrons: co-current fast electrons in the core and counter-current fast electron losses at the inner strike point. In view of future experiments like ITER where electron cyclotron current drive will generate a fast electron population, this technique could serve as a real-time monitor of fast electron losses and eventually feed an actuator on the current drive generation.
It is pointed out that Gurzadyan's (1988) fast-electron hypothesis for stellar flares encounters certain difficulties. The origin of the fast electrons is obscure. Negative flares and predicted ratios of X-ray to optical fluxes are not necessarily a proof of the fast-electron hypothesis. When the electrons thermalize, they will yield X-ray fluxes which are orders of magnitude too large to be consistent with observations.
Fast electron diffusion in stochastic magnetic field, obtaining diffusion coefficient as function of ratio of correlation time to Larmor period
We report on the measurement of filamented transport of laser-generated fast electron beams in near-critical density plasma. A relativistic intensity long-wave-infrared laser irradiated a hydrodynamically shaped helium gas flow at an electron density n e ≃ 10 25 m − 3 , generating a large flux of fast electrons that propagated beyond the critical surface. The beam-to-background electron density ratio was sufficiently high to drive growth of Weibel-like filamentation, which was measured by optical probing to extend up to 800 μ m with radii ∼ 10 μ m . Particle-in-cell simulations reproduce the main features of the filamentation generation, suggesting that collisionless processes are dominant in these interactions. Expansion of the filaments after formation infers a fast electron heated plasma temperature ∼ 400 eV in the overcritical density plasma. Published by the American Physical Society 2025
High-power, short-pulse laser-driven fast electrons can rapidly heat and ionize a high-density target before it hydrodynamically expands. The transport of such electrons within a solid target has been studied using two-dimensional (2D) imaging of electron-induced Kα radiation. However, it is currently limited to no or picosecond scale temporal resolutions. Here, we demonstrate femtosecond time-resolved 2D imaging of fast electron transport in a solid copper foil using the SACLA x-ray free electron laser (XFEL). An unfocused collimated x-ray beam produced transmission images with sub-micron and ~10 fs resolutions. The XFEL beam, tuned to its photon energy slightly above the Cu K-edge, enabled 2D imaging of transmission changes induced by electron isochoric heating. Time-resolved measurements obtained by varying the time delay between the x-ray probe and the optical laser show that the signature of the electron-heated region expands at ~25% of the speed of light in a picosecond duration. Time-integrated Cu Kα images support the electron energy and propagation distance observed with the transmission imaging. The x-ray near-edge transmission imaging with a tunable XFEL beam could be broadly applicable for imaging isochorically heated targets by laser-driven relativistic electrons, energetic protons, or an intense x-ray beam.
Final report on grant awarded to NIU to support SRF quarter-wave gun R&D at Argonne National Laboratory.
An equation is derived for calculating the energy distribution of fast electrons in a partially ionized gas and a method is provided to solve for the electron degradation spectrum and the energy deposition in different forms (ionization, excitation, or heating). As an example, the energy degradation of fast electrons in a gas of pure hydrogen is calculated, considering excitations to the lowest 10 atomic levels. The Bethe approximation and the continuous slowing-down approximation are discussed and it is concluded that these approximations are accurate to the order of 20 percent for electrons with initial energy of greater than about keV. The method and results can be used to determine heating, excitations, and ionizations by high-energy photoelectrons or cosmic-ray particles in various astrophysical circumstances, such as the interstellar medium, supernova envelopes, and QSO emission-line clouds.
Primary and afterglow emission from supercooled nitrogen excited by fast electrons
Hard x-rays produced by intense laser-produced fast electrons interacting with solids are a vital source for producing radiographs of high-density objects and implosion cores for inertial confinement fusion. Accurate calculation of hard x-ray sources requires a three-dimensional (3D) simulation geometry that fully models the electron transport dynamics, including electron recirculation and the generation of absolute photon yields. To date, 3D simulations of laser-produced bremsstrahlung photons over tens of picoseconds and code benchmarking have not been performed definitively. In this study, we characterize sub-picosecond laser-produced fast electrons by modeling angularly resolved bremsstrahlung measurements for refluxing and non-refluxing targets using the 3D hybrid particle-in-cell (PIC), Large Scale Plasma code. Bremsstrahlung radiation and escaped electron data were obtained by focusing a 50-TW Leopard laser (15 J, 0.35 ps, 2 × 10 19 W/cm 2 ) on a 100-μm-thick Cu foil and a Cu with a large plastic backing (Cu–CH target). Data for both the Cu and Cu–CH targets were reproduced for simulations with a given set of electron parameters. Comparison of the simulations revealed that the hard x-ray emission from the Cu target was significantly longer in duration than that from the Cu–CH target. Here, the benchmarked hybrid PIC code could prove to be a powerful tool in the design and optimization of time- and angular-dependent bremsstrahlung sources for flash x-ray and gamma-ray radiography.
Calculation of the stopping power of a plasma for fast electrons and positrons. First the classical limit is considered where beta = v/c is much less than alpha is the fine structure constant. Then the nonrelativistic Born-approximation formulas are derived; this domain corresponds to alpha much less than beta much less than 1. Finally, the general case of relativistic electrons and positrons is treated; in the relativistic case the scattering cross sections of Moller (electron-electron) and Bhabha (positron-electron) are used in the calculation. In all three energy domains the problem is broken up into cases of small and large momentum transfers. For large q, scattering off individual plasma electrons is considered, while in the limit of very small q for the quantum-mechanical domain, excitation of quantized plasma oscillations contributes to dE/dx; in the classical limit for small q the polarizability of the plasma provides the effective cutoff. The formulas for the stopping power differ slightly from those for a heavy ion going through a plasma because there are exchange effects and the fast electrons and positrons can lose a large fraction of their energy in one scattering off a plasma electron.
Inertial confinement fusion approaches involve the creation of high-energy-density states through compression. High gain scenarios may be enabled by the beneficial heating from fast electrons produced with an intense laser and by energy containment with a high-strength magnetic field. Here, we report experimental measurements from a configuration integrating a magnetized, imploded cylindrical plasma and intense laser-driven electrons as well as multi-stage simulations that show fast electrons transport pathways at different times during the implosion and quantify their energy deposition contribution. The experiment consisted of a CH foam cylinder, inside an external coaxial magnetic field of 5 T, that was imploded using 36 OMEGA laser beams. Two-dimensional (2D) hydrodynamic modelling predicts the CH density reaches 9.0 g cm − 3 , the temperature reaches 920 eV and the external B-field is amplified at maximum compression to 580 T. At pre-determined times during the compression, the intense OMEGA EP laser irradiated one end of the cylinder to accelerate relativistic electrons into the dense imploded plasma providing additional heating. The relativistic electron beam generation was simulated using a 2D particle-in-cell (PIC) code. Finally, three-dimensional hybrid-PIC simulations calculated the electron propagation and energy deposition inside the target and revealed the roles the compressed and self-generated B-fields play in transport. During a time window before the maximum compression time, the self-generated B-field on the compression front confines the injected electrons inside the target, increasing the temperature through Joule heating. For a stronger B-field seed of 20 T, the electrons are predicted to be guided into the compressed target and provide additional collisional heating. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 2)’.
A fast electron gun with subnanosecond rise and decay times and 100 mA peak beam current has been developed for delayed coincidence studies of atomic decays. The gun is fabricated from an inexpensive tetrode nuvistor, only slightly modified. The electron gun system has been successfully used in a delayed concidence study of fast decays of ionized helium.
A fast electron gun with subanosecond rise- and decay-times and 100 ma. peak beam current has been developed for delayed coincidence studies of atomic decays. The gun is fabricated from an inexpensive tetrode Nuvistor, involving only slight modification.
Primary and afterglow emission decay time from low temperature gaseous nitrogen excited by fast electrons explained by possible energy transfer
Presence of a large population of fast particles may qualitatively modify the tokamak equilibrium from the one that can be described by standard magneto-hydrodynamics (MHD). The kinetic modification of the MHD equilibrium was studied for a lower-hybrid (LH) wave driven plasma on the TST-2 spherical tokamak. The analysis was performed using an equilibrium reconstruction method based on an extended MHD model that considers a two-component plasma of bulk MHD fluid and kinetic fast electrons. Scrape-off-layer current appeared naturally in the extended MHD analysis because of the finite electron orbit excursion from the flux surfaces. This reduced the bulk pressure contribution to the toroidal current substantially. Furthermore, the resulting poloidal flux profile was more consistent with that inferred from the Thomson scattering measurement.
A powerful and flexible hard x-ray (HXR) camera has been recently installed and tested on the WEST tokamak (CEA, France) in collaboration with the Princeton Plasma Physics Laboratory. The diagnostic is a pinhole camera fielded with a 2D pixel detector equipped with a 1 mm thick CdTe sensor. The novelty of this diagnostic technique is the detector’s capability of adjusting the threshold energy at the pixel level. This innovation provides great flexibility in the energy configuration, allowing simultaneous space, energy, and time resolved x-ray measurements. The novel camera has been used to measure the core radiation from non-Maxwellian (fast) electrons accelerated by Lower Hybrid (LH) waves and also the beam–target emission of tungsten in the divertor region produced by fast electron losses interacting with the target. In addition, anisotropic hard x-ray emission has been detected for the first time at the WEST core and edge plasma, with opposite toroidal intensity trends. Finally, experimental vertical and toroidal HXR profiles have been successfully reproduced with the LH code LUKE.
Excitation cross section for doubly ionized states of argon, neon, and krypton by fast electrons