Reconfigurable Compute-In-Memory on Field-Programmable Ferroelectric Diodes
Not Available
77 NANOSCIENCE AND NANOTECHNOLOGY↗
SEARCH · Search NASA
Results for “ferroelectric diode”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ferroelectric Schottky diodes of CuInP 2 S 6 nanosheet
Ferroelectricity in van der Waals (vdW) layered material has attracted a great deal of interest recently. CuInP 2 S 6 (CIPS), the only vdW layered material whose ferroelectricity in the bulk was demonstrated by direct polarization measurements, was shown to remain ferroelectric down to a thickness of a few nanometers. However, its ferroelectric properties have just started to be explored in the context of potential device applications. Here, we report here the preparation and measurements of metal-ferroelectric semiconductor-metal heterostructures using nanosheets of CIPS obtained by mechanical exfoliation. Four bias voltage and polarization dependent resistive states were observed in the current–voltage characteristics, which we attribute to the formation of ferroelectric Schottky diode, along with switching behavior.
36 MATERIALS SCIENCE↗
Ferroelectric Al0.2Sc0.8N Diodes on NbN Electrodes Deposited on Sapphire Substrates
Research on AlScN ferroelectric capacitors with film thicknesses of 40 and 24 nm.
Esteves, Giovanni↗
Heteroepitaxial control of thickness, strain, and domain architecture in few-layer ferroelectric tin monochalcogenides
Thin-film epitaxy and epitaxial strain have been widely exploited to tune domain configurations, switching behavior, and ferroic properties in conventional three-dimensional ferroelectric thin films; however, its application to controlling the properties of two-dimensional (2D) ferroelectrics has remained largely unexplored. Here, using SnX (X = Se, S) as a model system, we demonstrate heteroepitaxial control of thickness, strain state, and domain architecture in few-layer ferroelectric SnX via growth on monolayer MoS2 van der Waals (vdW) templates. Compared with conventional growth, MoS2-templated heteroepitaxy promotes epitaxial alignment, yielding ultrathin SnSe films with improved crystalline quality, full areal coverage, and enlarged lateral dimensions. Strong interfacial epitaxial coupling induces pronounced in-plane strain and stabilizes a hierarchical ferroelastic domain architecture, in which long-range 90° stripe domains are further subdivided into nanoscale rotational variants, as revealed by scanning transmission electron microscopy and synchrotron X-ray microscopy. Piezoresponse force microscopy and second-harmonic polarimetry confirm robust in-plane polarization, while ferroelectricity in SnSe is established through polarization-electric field hysteresis and nonvolatile ferroelectric resistive switching with on/off ratios approaching 1000. A nonvolatile, switchable ferroelectric diode effect further evidences direct coupling between polarization and charge transport. Notably, ferroelectric switchability exhibits a strong thickness dependence and is preserved only below ∼10 layers. This vdW heteroepitaxial strategy is further extended to ferroelectric SnS. The seamless heteroepitaxial integration of 2D ferroelectrics with CMOS-compatible, wafer-scale MoS2 templates provides a general and scalable route for strain-enabled structural and ferroelectric engineering in emerging memory and low-power optoelectronic applications.
Wang, Yueyin↗
Indirect tunneling enabled spontaneous time-reversal symmetry breaking and Josephson diode effect in TiN/Al 2 O 3 /Hf 0.8 Zr 0.2 O 2 /Nb tunnel junctions
Josephson diode (JD) effect in Josephson tunnel junctions (JTJs) has attracted a great deal of attention due to its importance for developing superconducting-circuitry-based quantum technologies. Even though the preparation of high-quality JTJs by techniques employed in the semiconductor industry has been demonstrated, which was an important milestone because JTJs are the building blocks of superconducting electronics even before the quantum era, the JD effect has not been accomplished in them, nor has the highly desirable electrical control of the effect. We report here the fabrication of JTJs featuring a composite tunnel barrier of Al 2 O 3 and Hf 0.8 Zr 0.2 O 2 using complementary-metal-oxide-semiconductor compatible atomic layer deposition. These JTJs were found to show the JD effect in nominally zero magnetic fields with nonreciprocity controllable via an electric training current, yielding a surprisingly large diode efficiency. The quasiparticle tunneling, through which the Josephson coupling in a JTJ is established, was found to show theoretically expected gap features but no nonreciprocity. We attribute these observations to the simultaneous presence of positive and negative local Josephson couplings in the JTJs, with the negative Josephson coupling originating from indirect tunneling, which results in spontaneous time-reversal symmetry breaking. Finally, the double-minima washboard potential for the ensemble-averaged phase difference in the resistively and capacitively shunted junction model is shown to fully account for the experimentally observed JD effect.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Near Room Temperature Solvothermal Growth of Ferroelectric CsPbBr 3 Nanoplatelets with Ultralow Dark Current
CsPbBr 3 exhibits outstanding optoelectronic properties and thermal stability, making it a coveted material for detectors, light-emitting diodes, and solar cells. Despite observations of ferroelectricity in CsPbBr 3 quantum dots, synthesizing bulk ferroelectric CsPbBr 3 crystals has remained elusive, hindering its potential in next-generation optoelectronic devices like optical switches and ferroelectric photovoltaics. Here, a breakthrough is reported: a novel solvothermal technique enabling the growth of ferroelectric CsPbBr 3 nanoplatelets with lateral dimensions in the tens of micrometers. This represents a significant step toward achieving large-area ferroelectric CsPbBr 3 crystals. Unlike traditional methods, this approach allows for growth and crystallization of CsPbBr 3 in alcohol solutions by enhancing precursor solubility. Further this study confirms the ferroelectric nature of these nanoplatelets using second harmonic generation, electrical characterizations, and piezoresponse force microscopy. This work paves the way for utilizing ferroelectric CsPbBr 3 in novel optoelectronic devices, significantly expanding the potential of this material and opening doors for further exploration in this exciting field.
25 ENERGY STORAGE↗
Kinetically stabilized ferroelectricity in bulk single-crystalline HfO 2 :Y
HfO 2 , a simple binary oxide, exhibits ultra-scalable ferroelectricity integrable into silicon technology. This material has a polymorphic nature, with the polar orthorhombic (Pbc2 1 ) form in ultrathin films regarded as the plausible cause of ferroelectricity but thought not to be attainable in bulk crystals. In this work, using a state-of-the-art laser-diode-heated floating zone technique, we report the Pbc2 1 phase and ferroelectricity in bulk single-crystalline HfO 2 :Y as well as the presence of the antipolar Pbca phase at different Y concentrations. Neutron diffraction and atomic imaging demonstrate (anti)polar crystallographic signatures and abundant 90°/180° ferroelectric domains in addition to switchable polarization with negligible wake-up effects. Density-functional-theory calculations indicate that the yttrium doping and rapid cooling are the key factors for stabilization of the desired phase in bulk. Our observations provide insights into the polymorphic nature and phase control of HfO 2 , remove the upper size limit for ferroelectricity and suggest directions towards next-generation ferroelectric devices.
36 MATERIALS SCIENCE↗
Correlation Between Corrugation-Induced Flexoelectric Polarization and Conductivity of Low-Dimensional Transition Metal Dichalcogenides
The tunability of polar and semiconducting properties of low-dimensional transition metal dichalcogenides (TMDs) have propelled them to the forefront of fundamental and applied physical research. These materials can vary their electrophysical properties from nonpolar to ferroelectric, and from direct-band semiconducting to metallic. In addition to classical controlling factors, such as field effect, composition, and doping, new degrees of freedom emerge in TMDs due to the curvature-induced electron redistribution and the associated changes in electronic properties. Here we theoretically explore the elastic and electric fields, flexoelectric polarization and free charge density for a TMD nanoflake placed on a rough substrate with a sinusoidal corrugation profile. Finite element modelling results for different flake thickness and corrugation depth yield insights into the flexoelectric nature of the out-of-plane electric polarization and establish the unambiguous correlation between the polarization and static conductivity modulation. The modulation is caused by the coupling between the deformation potential and inhomogeneous elastic strains, which evolve in the TMD nanoflake due to the adhesion between the flake surface and corrugated substrate. We reveal a pronounced maximum in the thickness dependences of the electron and hole conductivity of MoS 2 and MoTe 2 nanoflakes placed on a corrugated substrate, which opens the way for the optimization of their geometry towards significant improvement in their polar and electronic properties, necessary for advanced applications in nanoelectronics and memory devices. Specifically, the obtained results can be useful for the development of nanoscale straintronic devices based on the bended MoS 2 , MoTe 2 , and MoSTe nanoflakes, such as diodes and bipolar transistors with a bending-controllable sharpness of p-n junctions.
42 ENGINEERING↗
Electrical control of magnetism by electric field and current-induced torques
The remanent magnetization of ferromagnets has long been studied and used to store binary information. While early magnetic memory designs relied on magnetization switching by locally generated magnetic fields, key insights in condensed matter physics later suggested the possibility of doing it by electrical means instead. In the 1990s, Slonczewski and Berger formulated the concept of current-induced spin torques in magnetic multilayers through which a spin-polarized current generated by a first ferromagnet may be used to switch the magnetization of a second one. This discovery drove the development of spin-transfer-torque magnetic random-access memories (MRAMs). More recent fundamental research revealed other types of current-induced torques named spin-orbit torques (SOTs) and will lead to a new generation of devices including SOT MRAMs and skyrmion-based devices. Parallel to these advances, multiferroics and their magnetoelectric coupling, first investigated experimentally in the 1960s, experienced a renaissance. Dozens of multiferroic compounds with new magnetoelectric coupling mechanisms were discovered and high-quality multiferroic films were synthesized (notably of BiFeO 3 ), also leading to novel device concepts for information and communication technology such as the magnetoelectric spin-orbit (MESO) transistor. The story of the electrical switching of magnetization, which is discussed in this review, is that of a dance between fundamental research (in spintronics, condensed matter physics, and materials science) and technology (MRAMs, MESO transistors, microwave emitters, spin diodes, skyrmion-based devices, components for neuromorphics, etc.). This pas de deux has led to major scientific and technological breakthroughs in recent decades (such as the conceptualization of pure spin currents, the observation of magnetic skyrmions, and the discovery of spin-charge interconversion effects). As a result, this field has not only propelled MRAMs into consumer electronics products but also fueled discoveries in adjacent research areas such as ferroelectrics or magnonics. Here, in this review, recent advances in the control of magnetism by electric fields and by current-induced torques are covered. Fundamental concepts in these two directions are reviewed first, their combination is then discussed, and finally current various families of devices harnessing the electrical control of magnetic properties for various application fields are addressed. The review concludes by giving perspectives in terms of both emerging fundamental physics concepts and new directions in materials science.
36 MATERIALS SCIENCE↗
Vertical and Lateral Etch Survey of Ferroelectric AlN/Al 1-x Sc x N in Aqueous KOH Solutions
Due to their favorable electromechanical properties, such as high sound velocity, low dielectric permittivity and high electromechanical coupling, Aluminum Nitride (AlN) and Aluminum Scandium Nitride (Al 1-x Sc x N) thin films have achieved widespread application in radio frequency (RF) acoustic devices. The resistance to etching at high scandium alloying, however, has inhibited the realization of devices able to exploit the highest electromechanical coupling coefficients. In this work, we investigated the vertical and lateral etch rates of sputtered AlN and Al 1-x Sc x N with Sc concentration x ranging from 0 to 0.42 in aqueous potassium hydroxide (KOH). Etch rates and the sidewall angles were reported at different temperatures and KOH concentrations. We found that the trends of the etch rate were unanimous: while the vertical etch rate decreases with increasing Sc alloying, the lateral etch rate exhibits a V-shaped transition with a minimum etch rate at x = 0.125. By performing an etch on an 800 nm thick Al 0.875 Sc 0.125 N film with 10 wt% KOH at 65 °C for 20 min, a vertical sidewall was formed by exploiting the ratio of the {$10\overline{11}$ planes and {$1\overline{1}00$ planes etch rates. This method does not require preliminary processing and is potentially beneficial for the fabrication of lamb wave resonators (LWRs) or other microelectromechanical systems (MEMS) structures, laser mirrors and Ultraviolet Light-Emitting Diodes (UV-LEDs). It was demonstrated that the sidewall angle tracks the trajectory that follows the {$\overline{1}2\overline{12}$ of the hexagonal crystal structure when different c/a ratios were considered for elevated Sc alloying levels, which may be used as a convenient tool for structure/composition analysis.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗