Search NASA⌕ Search

SEARCH · Search NASA

Results for “fictive temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Effect of the fictive temperature on the modulus, hardness, yield strength, dynamic mechanical and creep response of Zr 44 Ti 11 Cu 10 Ni 10 Be 25 metallic glasses

Characterizing the dependence of the mechanical properties and structure of metallic glasses on processing parameters and thermal history is of significant importance to understand the nature of glass. One way of defining a specific structural state of a glass is by means of its fictive temperature T f at which the supercooled liquid falls out of a metastable equilibrium and forms a glass. Since the metastable equilibrium state before quenching is assumed to be well defined, T f is ultimately thought of as a quantity that describes a specific, reproducibly obtainable structural state. In this research, the effect of systematic variations of an alloy’s structural state, achieved through purposefully setting its T f , on a range of mechanical properties like modulus, hardness, yield strength, and creep response is studied. Towards this end, amorphous Zr 44 Ti 11 Cu 10 Ni 10 Be 25 samples with different T f ’s were produced and subsequently examined using nanoindentation, dynamic mechanical thermal analysis, and density measurements. It is observed that the lower fictive temperatures directly result in a higher the packing efficiency, i.e., a lower available (‘free’) volume in the glass. The resulting denser atomic packing manifests in increased values for hardness, modulus, and yield strength. These effects were found to be substantial despite the fact that all samples featured the exact same chemical composition and phase.

36 MATERIALS SCIENCE↗

Critical fictive temperature for plasticity in metallic glasses

A long-sought goal in metallic glasses is to impart ductility without conceding their strength and elastic limit. The rational design of tough metallic glasses, however, remains challenging because of the inability of existing theories to capture the correlation between plasticity, composition and processing for a wide range of glass-forming alloys. Here we propose a phenomenological criterion based on a critical fictive temperature, Tfc, which can rationalize the effect of composition, cooling rate and annealing on room-temperature plasticity of metallic glasses. Such criterion helps in understanding the widespread mechanical behaviour of metallic glasses and reveals alloy-specific preparation conditions to circumvent brittleness.

42 ENGINEERING↗

Using Artificial Microstructures to Understand Microstructure Property Relationship-Toughening Mechanisms in Metallic Glass (Final Report)

Metallic glasses are a new class of structural materials which exhibit exciting mechanical properties including high strength and elasticity. In terms of fracture toughness, the material class of metallic glasses spans a wide range; Some metallic glasses are extremely brittle and exhibit near ideal brittle behavior whereas others can be exceptional tough with values comparable to the toughest metals out there. Such large range of observed fracture toughness within the material class of metallic glasses is surprising as they have seemingly a very similar atomic structure. Therefore, we developed “artificial microstructures” which allows to decouple the various contribution of sample geometry, imperfection and structure. Specifically, we decouple variations in the alloys’ chemical composition and the atomic structure and quantified the resulting fracture toughness. Atomic structure of a metallic glass can be modified by the fictive temperature. The fictive temperature of a glass is the temperature at which the liquid metallic glass falls out of equilibrium upon colling and forms a glass. Upon further cooling the structure is maintained only thermal oscillations decrease due to a lower absolute temperature. We found that the effect of fictive temperature (same chemistry, different structural stages of the glass) is comparable to the variations of fracture toughness when the chemistry is varied. Hence, it appears that the subtle differences in the glass structure are responsible for the large range of fracture toughness’s observed. Our results reveal that fracture toughness within the material class of metallic glasses varies significantly and we found some example alloys with exceptional high resistance to fracture and others that are almost ideally brittle. Significant influences on the fracture toughness have the structure of the glass, its chemistry, and some imperfections in the structure.

36 MATERIALS SCIENCE↗

Fictive temperature-independent density and minimum indentation size effect in calcium aluminosilicate glass

Using the calcium aluminosilicate system a glass was developed that exhibits fictive temperature-independent density by creating an intermediate glass between normal and anomalous glasses. Normal glass, such as soda-lime silicate glass, exhibits decreasing density with increasing fictive temperature while anomalous glass, such as silica glass, exhibits increasing density with increasing fictive temperature. This intermediate glass composition was found to exhibit the minimum indentation size effect during indentation hardness testing. It appears that the indentation size effect is correlated with a deformation-induced fictive temperature increase, which is accompanied by a density change and hardness change in the vicinity of the indentation. It is suggested from these observations that indentation size effect originates from the energy required to create interfaces and defects such as shear bands, subsurface cracks, and point defects near the indenter-specimen boundary, which accompany the volume change.

36 MATERIALS SCIENCE↗

An Assessment of Molecular Dynamic Force Fields for Silica for Use in Simulating Laser Damage Mitigation

We compare force fields (FF's) that have been used in molecular dynamic (MD) simulations of silica in order to assess their applicability for use in simulating IR-laser damage mitigation. Although pairwise FF?s obtained by fitting quantum mechanical calculations such as the BKS and CHIK potentials have been shown to reproduce many of the properties of silica including the stability of silica polymorphs and the densification of the liquid, we show that melting temperatures and fictive temperatures are much too high. Softer empirical force fields give liquid and glass properties at experimental temperatures but may not predict all properties important to laser mitigation experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Residual stress and damage-induced critical fracture on CO2 laser treated fused silica

Localized damage repair and polishing of silica-based optics using mid- and far-IR CO{sub 2} lasers has been shown to be an effective method for increasing optical damage threshold in the UV. However, it is known that CO{sub 2} laser heating of silicate surfaces can lead to a level of residual stress capable of causing critical fracture either during or after laser treatment. Sufficient control of the surface temperature as a function of time and position is therefore required to limit this residual stress to an acceptable level to avoid critical fracture. In this work they present the results of 351 nm, 3 ns Gaussian damage growth experiments within regions of varying residual stress caused by prior CO{sub 2} laser exposures. Thermally stressed regions were non-destructively characterized using polarimetry and confocal Raman microscopy to measure the stress induced birefringence and fictive temperature respectively. For 1 {approx} 40s square pulse CO{sub 2} laser exposures created over 0.5-1.25 kW/cm{sup 2} with a 1-3 mm 1/e{sup 2} diameter beam (T{sub max} {approx} 1500-3000 K), the critical damage site size leading to fracture increases weakly with peak temperature, but shows a stronger dependence on cooling rate, as predicted by finite element hydrodynamics simulations. Confocal micro-Raman was used to probe structural changes to the glass over different thermal histories and indicated a maximum fictive temperature of 1900K for T{sub max} {ge} 2000 K. The effect of cooling rate on fictive temperature caused by CO{sub 2} laser heating are consistent with finite element calculations based on a Tool-Narayanaswamy relaxation model.

42 ENGINEERING↗

Thermomechanical Modeling of Laser-Induced Structural Relaxation and Deformation of Glass: Volume Changes in Fused Silica at High Temperatures [Thermo-mechanical modeling of laser-induced structural relaxation and deformation of SiO 2 glass]

In a fully coupled thermomechanical model of the nanoscale deformation in amorphous SiO 2 due to laser heating is presented. Direct measurement of the transient, nonuniform temperature profiles was used to first validate a nonlinear thermal transport model. Densification due to structural relaxation above the glass transition point was modeled using the Tool-Narayanaswamy (TN) formulation for the evolution of structural relaxation times and fictive temperature. TN relaxation parameters were derived from spatially resolved confocal Raman scattering measurements of Si–O–Si stretching mode frequencies. These thermal and microstructural data were used to simulate fictive temperatures which are shown to scale nearly linearly with density, consistent with previous measurements from Shelby et al. Volumetric relaxation coupled with thermal expansion occurring in the liquid-like and solid-like glassy states lead to residual stresses and permanent deformation which could be quantified. But, experimental surface deformation profiles between 1700 and 2000 K could only be reconciled with our simulation by assuming a roughly 2 × larger liquid thermal expansion for a-SiO 2 with a temperature of maximum density ~150 K higher than previously estimated by Bruckner et al. Calculated stress fields agreed well with recent laser-induced critical fracture measurements, demonstrating accurate material response prediction under processing conditions of practical interest.

36 MATERIALS SCIENCE↗

Silica structural changes induced by thermal treatment or ionic implantation as probed by IR reflectance spectroscopy

Fourier transformed infrared microreflectance spectroscopy is used to probe and compare the consequences of thermal quenching or ionic implantation on the structure of silica. A linear change in the main structural feature associated with Si-O-Si vibration with fictive temperature (T{sub f}) is observed up to T{sub f}=1400 deg. C. Ionic implantation is shown to shift the frequency of the main IR Si-O-Si vibration toward much lower wavenumbers, for all deposited energies, indicating that a comparison can be drawn between fictive temperature and irradiation effects. Extrapolating the linear changes in the IR structural bands obtained as a function of T{sub f} for the implanted samples, we show that two structural (nu{sub TO}) and (nu{sub B}) contributions are not affected by ionic implantation, as they would be by a unique very high T{sub f}. In the case of ionic implantation, we also evidence the development of some specific structural contributions indicating a depolymerization of silica network.

36 MATERIALS SCIENCE↗

Effect of annealing on the laser induced damage of polished and CO{sub 2} laser-processed fused silica surfaces

We investigate the effect of different heat treatments on the laser-induced damage probabilities of fused silica samples. Isothermal annealing in a furnace is applied, with different temperatures in the range 700–1100 °C and 12 h annealing time, to super-polished fused silica samples. The surface flatness and laser damage probabilities at 3 ns, 351 nm are measured before and after the different annealing procedures. We have found a significant improvement of the initial laser damage probabilities of the silica surface after annealing at 1050 °C for 12 h. A similar study has been conducted on CO{sub 2} laser-processed sites on the surface of the samples. Before and after annealing, we have studied the morphology of the sites, the evolution of residual stress, and the laser-induced damage threshold measured at 351 nm, 3 ns. In this case, we observe that the laser damage resistance of the laser created craters can reach the damage level of the bare fused silica surface after the annealing process, with a complete stress relieve. The obtained results are then compared to the case of local annealing process by CO{sub 2} laser irradiation during 1 s, and we found similar improvements in both cases. The different results obtained in the study are compared to numerical simulations made with a thermo-mechanical model based on finite-element method that allows the simulation of the isothermal or the local annealing process, the evolution of stress and fictive temperature. The simulation results were found to be very consistent with experimental observations for the stresses evolution after annealing and estimation of the heat affected area during laser-processing based on the density dependence with fictive temperature. Following this work, the temperature for local annealing should reach 1330–1470 °C for an optimized reduction of damage probability and be below the threshold for material removal, whereas furnace annealing should be kept below the annealing point to avoid sample deformation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inhomogeneous broadening and peak shift of the 7.6 eV optical absorption band of oxygen vacancies in SiO{sub 2}

The peak parameters of radiation-induced 7.6 eV optical absorption band of oxygen vacancies (Si-Si bonds) were examined for high-purity synthetic α-quartz and amorphous SiO{sub 2} (a‐SiO{sub 2}) exposed to {sup 60}Co γ-rays. The peak shape is asymmetric with the steeper edge at the lower energy side both in α-quartz and a‐SiO{sub 2}, and the peak energy is larger for α-quartz than that for a‐SiO{sub 2}. The full width at half maximum for a‐SiO{sub 2} is larger by ∼40-60% than that for α-quartz, and it increases with an increase in the disorder of the a‐SiO{sub 2} network, which is enhanced by raising the temperature of preannealing before irradiation, i.e., fictive temperature. These data are interpreted from the viewpoint of the site-to-site distribution of the Si-Si bond length in a‐SiO{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparing the use of mid-infrared versus far-infrared lasers for mitigating damage growth on fused silica

Laser-induced growth of optical damage can limit component lifetime and, therefore, increase operating costs of large-aperture fusion-class laser systems. While far-infrared (IR) lasers have been used previously to treat laser damage on fused silica optics and render it benign, little is known about the effectiveness of less-absorbing mid-IR lasers for this purpose. In this study, we quantitatively compare the effectiveness and efficiency of mid-IR (4.6 {mu}m) versus far-IR (10.6 {mu}m) lasers in mitigating damage growth on fused silica surfaces. The nonlinear volumetric heating due to mid-IR laser absorption is analyzed by solving the heat equation numerically, taking into account the temperature-dependent absorption coefficient {alpha}(T) at {lambda}=4.6 {mu}m, while far-IR laser heating is well described by a linear analytic approximation to the laser-driven temperature rise. In both cases, the predicted results agree well with surface temperature measurements based on IR radiometry, as well as subsurface fictive temperature measurements based on confocal Raman microscopy. Damage mitigation efficiency is assessed using a figure of merit (FOM) relating the crack healing depth to laser power required, under minimally ablative conditions. Based on our FOM, we show that, for cracks up to at least 500 {mu}m in depth, mitigation with a 4.6 {mu}m mid-IR laser is more efficient than mitigation with a 10.6 {mu}m far-IR laser. This conclusion is corroborated by direct application of each laser system to the mitigation of pulsed laser-induced damage possessing fractures up to 225 {mu}m in depth.

36 MATERIALS SCIENCE↗

The effect of cooling rates on the apparent fragility of Zr-based bulk metallic glasses

We investigate the behavior of the kinetic fragility parameter D* as different cooling rates are applied to samples of the Zr{sub 57}Cu{sub 15.4}Ni{sub 12.6}Al{sub 10}Nb{sub 5} and Zr{sub 58.5}Cu{sub 15.6}Ni{sub 12.8}Al{sub 10.3}Nb{sub 2.8} bulk metallic glass formers. The glassy samples are heated into the supercooled liquid region using differential scanning calorimetry (DSC) and cooled back into the glassy state with sets of different cooling rates, q{sub C}. The shifts in the glass transition are measured by determining the onset glass transition temperature, T{sub g}{sup onset}, as well as the limiting fictive temperature, T{sub f}{sup '}, upon reheating with a set of heating rates, q{sub H}. We then model the data by assuming a Vogel-Fulcher-Tammann-type behavior in the structural relaxation time, {tau}, and observe an apparent increase in the kinetic fragility parameter for slower cooling rates. These results show that fragilities calculated from DSC scans, where q{sub H}=q{sub C} are in good agreement with those from equilibrium viscosity data recently obtained by three-point beam-bending.

36 MATERIALS SCIENCE↗

Comparison of laser-based mitigation of fused silica surface damage using mid- versus far-infrared lasers

Laser induced growth of optical damage can limit component lifetime and therefore operating costs of large-aperture fusion-class laser systems. While far-infrared (IR) lasers have been used previously to treat laser damage on fused silica optics and render it benign, little is known about the effectiveness of less-absorbing mid-IR lasers for this purpose. In this study, they quantitatively compare the effectiveness and efficiency of mid-IR (4.6 {micro}m) versus far-IR (10.6 {micro}m) lasers in mitigating damage growth on fused silica surfaces. The non-linear volumetric heating due to mid-IR laser absorption is analyzed by solving the heat equation numerically, taking into account the temperature-dependent absorption coefficient {alpha}(T) at {lambda} = 4.6 {micro}m, while far-IR laser heating is well-described by a linear analytic approximation to the laser-driven temperature rise. In both cases, the predicted results agree well with surface temperature measurements based on infrared radiometry, as well as sub-surface fictive temperature measurements based on confocal Raman microscopy. Damage mitigation efficiency is assessed using a figure of merit (FOM) relating the crack healing depth to laser power required, under minimally-ablative conditions. Based on their FOM, they show that for cracks up to at least 500 {micro}m in depth, mitigation with a 4.6 {micro}m mid-IR laser is more efficient than mitigation with a 10.6 {micro}m far-IR laser. This conclusion is corroborated by direct application of each laser system to the mitigation of pulsed laser-induced damage possessing fractures up to 225 {micro}m in depth.

42 ENGINEERING↗

Response of complex networks to compression: Ca, La, and Y aluminoborosilicate glasses formed from liquids at 1 to 3 GPa pressures

Aluminoborosilicate glasses containing relatively high field strength modifiers (Ca, La, and Y) have been compressed at pressures up to 3 GPa and near the glass transition temperature (T{sub g}) and quenched to room temperature at high pressure followed by decompression. Structural changes were quantified with high-resolution {sup 27}Al and {sup 11}B MAS nuclear magnetic resonance at 14.1–18.8 T. The changes with pressure in Al and B coordinations in the recovered samples are quite large with more than 50% decreases in tetrahedral aluminum ({sup IV}Al) and 200%-300% increases in tetrahedral boron ({sup IV}B). Glasses with higher field strength modifiers (La and Y) contain more high coordinated aluminum ({sup V,V} {sup I}Al) at all pressures studied. More high coordinated boron also correlates with higher field strength modifier if all three compositions are compared on an isothermal basis. Although lowering fictive temperature and increasing pressure both increase Al and B coordinations, our study shows that the actual mechanisms for structural changes are most probably different for temperature and pressure effects. Using a rough thermodynamic model to extrapolate to higher pressures, it appears that a simple non-bridging oxygen (NBO) consumption mechanism is not sufficient to convert all the aluminum to octahedral and boron to tetrahedral coordination, suggesting other mechanisms for structural changes could occur at high pressure as NBO becomes depleted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural dynamics and rejuvenation during cryogenic cycling in a Zr-based metallic glass

Subjecting metallic glasses repeatedly to liquid nitrogen temperature has become a popular method to homogeneously rejuvenate the material. Here in this paper we reveal the atomic-scale structural dynamics using in-situ x-ray photon correlation spectroscopy (XPCS) during and after cryogenic cycling of a Zr-based metallic glass in two structural states (plate and ribbon). Heterogeneous structural dynamics is observed at 300 K that changes to monotonic aging at 78 K. It is found that cryogenic cycling homogenizes the relaxation time distribution. This effect is much more pronounced in the ribbon, which is the only structural state that rejuvenates upon cycling. We furthermore reveal how fast atomic-scale dynamics is correlated with long-time structural relaxation times irrespective of the structural state, and that the ribbon exhibits unexpected additional fast atomic-scale relaxation in comparison to the plate material. A structural picture emerges that points towards heterogeneities in the fictive temperature as a requirement for cryogenic energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aging kinetics of levoglucosan orientational glass as a rate dispersion process and consequences for the heterogeneous dynamics view

Aging kinetics of a glass is currently modeled in terms of slowing of its α-relaxation dynamics, whose features are interpreted in terms of dynamic heterogeneity, i.e., formation and decay of spatially and temporally distinct nm-size regions. To test the merits of this view, we studied the calorimetric effects of aging an orientational glass of levoglucosan crystal in which such regions would not form in the same way as they form in liquids, and persist in structural glasses, because there is no liquid-like molecular diffusion in the crystal. By measuring the heat capacity, C{sub p}, we determined the change in the enthalpy, H, and the entropy, S, during two aging-protocols: (a) keeping the samples isothermally at temperature, T{sub a}, and measuring the changes after different aging times, t{sub a}, and (b) keeping the samples at different T{sub a}s and measuring the changes after the same t{sub a}. A model-free analysis of the data shows that as t{sub a} is increased (procedure (a)), H and S decrease according to a dispersive rate kinetics, and as T{sub a} is increased (procedure (b)), H and S first increase, reach a local maximum at a certain T{sub a}, and then decrease. Even though there is no translational diffusion to produce (liquid-like) free volume, and no translational-rotational decoupling, the aging features are indistinguishable from those of structural glasses. We also find that the Kohlrausch parameter, originally fitted to the glass-aging data, decreases with decrease in T{sub a}, which is incompatible with the current use of the aging data for estimating the α-relaxation time. We argue that the vibrational state of a glass is naturally incompatible with its configurational state, and both change on aging until they are compatible, in the equilibrium liquid. So, dipolar fluctuations seen as the α-relaxation would not be the same motions that cause aging. We suggest that aging kinetics is intrinsically dispersive with its own characteristic rate constant and it does not yield the α-relaxation rate. In this view, thermodynamic and other properties define the fictive temperature; the real or imaginary components of a dynamic property do not define it. While particles’ overall motions may still play a crucial role in (structural) glass physics, we conclude that translational diffusion alone is not a requirement for structure stabilization on aging of a kinetically frozen state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High energy x-ray and neutron studies of disordered energy-related materials at extreme conditions

The fundamental scientific accomplishments are: (1) advances in a general description of the liquid state by employing structural models constrained by measurements to interpret experimental results and extend them to liquids in general, with special emphasis on (2) The structure of the high-temperature crystal and molten UO 2 and 3) water. Specifically, samples of UO 2 and water were probed using high-energy x-rays at the Advanced Photon Source. The high Z of UO 2 , and the 2-3mm diameter droplet shape of the molten sample, means that >100keV X-rays are required to minimize absorption and multiple scattering, which can distort the measured structure factor. A high flux of x-rays is also required to obtain sufficient statistical accuracy in short (a few seconds) measurement times. The scattered x-ray data were analyzed and pair distribution functions, extracted that characterize the local and long-range atomic structure of the material. The measurements of the hot UO 2 solid show a substantial increase in oxygen disorder and, upon melting, the average U-O coordination was found to decrease from 8 to 6.7±0.5. The research incorporated development of diffraction techniques, sample environment optimization and state-of-the-art simulation techniques. The symbiotic nature of the advances in simulation and experiment allowed for a more focused and informed development of future experiments, effective use of expensive beam time and generated new research agendas for the growing number of research groups, within the US and internationally, that focus on the structure of liquids. Molecular dynamics (MD) provided detailed information when combined with high-quality XN data including addressing key issues in liquids; the relationship between cooling path, structure and fictive temperature, and the trade-offs between network over connectedness in liquids containing low-coordination cations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗