Offshore Field Measurement Campaign Planning Summary of PIRT Workshops and Initial Experiment Conceptualization
Explore the source record for details and available documents.
Maniaci, David↗
SEARCH · Search NASA
Results for “field campaign measurements”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Hydrometeor Profiles Derived from Airborne Radar and Wideband Radiometer Observations
A rich dataset was obtained with observations from the MIR (Millimeter-wave Imaging Radiometer, 89, 150, 183.3$\pm$1, 183.3$\pm$3,183.3$\pm$7, and 220 apprx.GHz), the AMPR (Advanced Microwave Precipitation Radiometer, 10.7, 19.35, 37, and 85 approx. GHz), and the EDOP (ER-2 Doppler Radar, 9.6 approx. GHz) on board the ER-2 aircraft during the CAMEX-3/TEFLUN-B (Convection and Moisture Experiment/Texas and Florida Underflights) TRMM (Tropical Rainfall Measuring Mission) field campaign. Measurements over the ocean from these three instruments on 26 August 1998 were used in our iterative retrieval algorithm to estimate hydrometeor drop size profiles, The algorithm attempts to minimize the difference between the observations and forward radiometer and radar calculations based on the estimated profile. The high frequency MIR observations provide detailed information about the high altitude ice microphysics, while the AMPR is mostly used to define liquid hydrometeor characteristics. The EDOP provides an initial estimate of the profile and as a consistency check throughout the iterative cycle. The retrieval algorithm, specific results for convective and anvil cases, and general implications of this work will be presented.
Skofronick-Jackson, G. M.↗
Source Attribution of Methane Enhancements at the Southern Great Plains Atmospheric Radiation Measurement Site Field Campaign Report
Tower data from 2017 to 2020 revealed that the U.S. Department of Energy’s Southern Great Plains (SGP) Atmospheric Radiation Measurements (ARM) observatory in Oklahoma exhibited significant CH 4 enhancements compared to other U.S. tower sites. On average, near-surface CH 4 at the ARM site was higher, had larger diurnal and seasonal variations, and had sharper near-surface increases at night compared to other tower sites in the U.S. A field campaign was conducted in June 2024 to identify and quantify the surrounding CH 4 emission sources by two researchers from the University of Oklahoma. During the campaign, a mobile measurement was conducted using a LI-COR 7810 tracer gas analyzer mounted on a vehicle during June 23-26, 2024 near the SGP site (within 7 km distance). We sampled CH 4 along predefined routes surrounding a suspected source, i.e., a large animal feeding operation (AFO) farm 5.8 km northwest of the SGP ARM site. Measurements were collected between 04:30 and 09:00 local time when the planetary boundary layer (PBL) was shallow, increasing sensitivity to surface emissions. Driving speed was kept below 5 mph to minimize pressure-related artifacts. CH 4 concentrations downwind of the AFO exceeded 6000 ppb on the early morning of June 26, corresponding to an emission rate of ~95 kg⋅hr -1 estimated using the mass balance method. Additional sources identified during the campaign include nearby open-range cattle and leaks from a nearby natural gas pipeline.
54 ENVIRONMENTAL SCIENCES↗
In Situ Cloud Measurements at AMF3 Field Campaign Report
This campaign is a follow-up project to the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility field campaign entitled Cloud Droplet Measurement System for TBS that was focused on integration of the Mesa Photonics' cloud droplet measurement system (CDMS) into the DOE ARM tethered balloon system (TBS) and its initial field testing at ARM’s Southern Great Plains (SGP) atmospheric observatory in February–March 2020. The CDMS performs in situ measurement of droplet size distribution function and droplet number density in clouds. These characteristics are important cloud microphysical properties that are critical input parameters for atmospheric models and are also useful for proper calibration and validation of performance of other atmospheric measurement instrumentation. The overall goals of this campaign were to deploy the CDMS on the DOE ARM TBS, test its compatibility with the TBS under relevant conditions, and perform a series of in-cloud measurements at the third ARM Mobile Facility (AMF3) at Oliktok Point, Alaska. The TBS flights were conducted on November 12–19, 2020.
54 ENVIRONMENTAL SCIENCES↗
S0 Uncrewed Aircraft System Measurement Characterization Field Campaign Report
The lower atmosphere contributes directly to the modulation of weather and climate. Understanding the importance of this part of the atmosphere, scientists have worked to improve the representation of the atmospheric boundary layer in numerical prediction tools. Such work depends upon information from observing systems, including remote sensors, weather balloons, and research aircraft. Recent years have seen significant advances in uncrewed aircraft systems (UAS) for atmospheric research. Those efforts have provided new perspectives on atmospheric and surface conditions, particularly from smaller UAS (sUAS) platforms. This field campaign included collection of data using several sUAS, and comparing the sUAS data to those from different observing facilities at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility’s Southern Great Plains (SGP) observatory in Oklahoma. Over the course of one week, the Black Swift Technologies and University of Nebraska teams conducted flights for the sole purpose of system evaluation and intercomparison. In addition, these teams conducted joint flight operations at the Marshall, Oklahoma Mesonet site alongside teams from the University of Colorado, University of Oklahoma, and Oklahoma State University to collect additional data for side-by-side comparison. Platforms operated by Black Swift Technologies and the University of Nebraska under this project included one fixed-wing and two rotary-wing platforms, as well as an instrumented surface vehicle. These include the Black Swift Technologies S0 UAS, the University of Nebraska M600 UAS, a University of Nebraska-operated Meteomatics Meteodrone UAS, and the University of Nebraska CoMeT (Combined Mesonet and Tracker) vehicle. Additional details on all of these platforms can be found in de Boer et al. (in prep). In total, 95 sUAS flights were conducted for a combined total of 18.6 flight hours. The S0 was operated both to the south and north of the SGP 60 m tower, while the M600 and Meteodrone were operated directly to the east of the tower. Weather conditions were generally good, with moderate winds. Flights were conducted both to follow the extra radiosondes that were launched as part of this campaign, as well as to conduct extended statistical sampling at tower instrument heights. The later flights also provided data for statistical platform intercomparison.
54 ENVIRONMENTAL SCIENCES↗
Ice Nucleation Measurements during TRACER (Field Campaign Report)
This campaign, Ice Nucleation Measurements during TRACER, was conducted during the TRacking Aerosol Convection Interactions ExpeRiment (TRACER) in Houston, Texas during June-September, 2022. Specifically, our ice nucleation campaign was designed to improve understanding of ice nucleating particles (INPs) and their role in deep convective clouds across the Houston region. Summertime deep convection in southeast Texas is regularly tied to the sea-breeze front (SBF) that pushes inland from the Gulf of Mexico across the region. During TRACER, three Davis Rotating Uniform size-cut Monitors (DRUM; DRUMAir 4-DRUM) were used to collect aerosols for offline ice nucleation measurements in the Brooks laboratory at Texas A&M University. The three instruments were located at the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) first Mobile Facility (AMF1) in La Porte, at the ancillary site in Guy (ANC), and onboard the newly developed Texas A&M Rapid Onsite Atmospheric Measurements Van (ROAM-V). Aerosol at the main ARM TRACER site, ARM1, is expected to arise from local urban, industrial, and ship channel sources. In contrast, the ANC is isolated and rural, and can therefore provide a continental background aerosol population. On select days when convective development was forecast to be probable, ROAM-V commuted from College Station, Texas to Galveston, sampled in the morning/mid-day on the coast, and then transited to a second inland site for the afternoon/evening. Sampling from the ROAM-V allowed us to capture aerosol and meteorological differences between maritime and continental airmasses by strategically positioning the ROAM-V near the coast in the morning in the opposite airmass from the AMF1 site.
54 ENVIRONMENTAL SCIENCES↗
Atmospheric Radiation Measurement (ARM) airborne field campaign data products between 2013 and 2018
Airborne measurements are pivotal for providing detailed, spatiotemporally resolved information about atmospheric parameters and aerosol and cloud properties, thereby enhancing our understanding of dynamic atmospheric processes. For 30 years, the US Department of Energy (DOE) Office of Science supported an instrumented Gulfstream 1 (G-1) aircraft for atmospheric field campaigns. Data from the final decade of G-1 operations were archived by the Atmospheric Radiation Measurement (ARM) Data Center and made publicly available at no cost to all registered users. To ensure a consistent data format and to improve the accessibility of the ARM airborne data, an integrated dataset was recently developed covering the final 6 years of G-1 operations (2013 to 2018, https://doi.org/10.5439/1999133; Mei and Gaustad, 2024). The integrated dataset includes data collected from 236 flights (766.4 h), which covered the Arctic, the US Southern Great Plains (SGP), the US West Coast, the eastern North Atlantic (ENA), the Amazon Basin in Brazil, and the Sierras de Córdoba range in Argentina. These comprehensive data streams provide much-needed insight into spatiotemporal variability in the thermodynamic quantities and aerosol and cloud properties for addressing essential science questions in Earth system process studies. This paper describes the DOE ARM merged G-1 datasets, including information on the acquisition, data collection challenges and future potentials, and quality control processes. It further illustrates the usage of this merged dataset to evaluate the Energy Exascale Earth System Model (E3SM) with the Earth System Model Aerosol–Cloud Diagnostics (ESMAC Diags) package.
54 ENVIRONMENTAL SCIENCES↗
Advances in High Energy Solid-State 2-micron Laser Transmitter Development for Ground and Airborne Wind and CO2 Measurements
Sustained research efforts at NASA Langley Research Center (LaRC) during last fifteen years have resulted in a significant advancement in 2-micron diode-pumped, solid-state laser transmitter for wind and carbon dioxide measurement from ground, air and space-borne platform. Solid-state 2-micron laser is a key subsystem for a coherent Doppler lidar that measures the horizontal and vertical wind velocities with high precision and resolution. The same laser, after a few modifications, can also be used in a Differential Absorption Lidar (DIAL) system for measuring atmospheric CO2 concentration profiles. Researchers at NASA Langley Research Center have developed a compact, flight capable, high energy, injection seeded, 2-micron laser transmitter for ground and airborne wind and carbon dioxide measurements. It is capable of producing 250 mJ at 10 Hz by an oscillator and one amplifier. This compact laser transmitter was integrated into a mobile trailer based coherent Doppler wind and CO2 DIAL system and was deployed during field measurement campaigns. This paper will give an overview of 2-micron solid-state laser technology development and discuss results from recent ground-based field measurements.
Singh, Upendra N.↗
Progress on High-Energy 2-micron Solid State Laser for NASA Space-Based Wind and Carbon Dioxide Measurements
Sustained research efforts at NASA Langley Research Center during last fifteen years have resulted in significant advancement of a 2-micron diode-pumped, solid-state laser transmitter for wind and carbon dioxide measurements from ground, air and space-borne platforms. Solid-state 2-micron laser is a key subsystem for a coherent Doppler lidar that measures the horizontal and vertical wind velocities with high precision and resolution. The same laser, after a few modifications, can also be used in a Differential Absorption Lidar system for measuring atmospheric CO2 concentration profiles. Researchers at NASA Langley Research Center have developed a compact, flight capable, high energy, injection seeded, 2-micron laser transmitter for ground and airborne wind and carbon dioxide measurements. It is capable of producing 250 mJ at 10 Hz by an oscillator and one amplifier. This compact laser transmitter was integrated into a mobile trailer based coherent Doppler wind and CO2 DIAL system and was deployed during field measurement campaigns. This paper will give an overview of 2-micron solid-state laser technology development and discuss results from recent ground-based field measurements.
Singh, Upendra N.↗
Impact of Asian Aerosols on Precipitation Over California: An Observational and Model Based Approach
Dust and pollution emissions from Asia are often transported across the Pacific Ocean to over the western United States. Therefore, it is essential to fully understand the impact of these aerosols on clouds and precipitation forming over the eastern Pacific and western United States, especially during atmospheric river events that account for up to half of California's annual precipitation and can lead to widespread flooding. In order for numerical modeling simulations to accurately represent the present and future regional climate of the western United States, we must account for the aerosol-cloud-precipitation interactions associated with Asian dust and pollution aerosols. Therefore, we have constructed a detailed study utilizing multi-sensor satellite observations, NOAA-led field campaign measurements, and targeted numerical modeling studies where Asian aerosols interacted with cloud and precipitation processes over the western United States. In particular, we utilize aerosol optical depth retrievals from the NASA Moderate Resolution Imaging Spectroradiometer (MODIS), NOAA Geostationary Operational Environmental Satellite (GOES-11), and Japan Meteorological Agency (JMA) Multi-functional Transport Satellite (MTSAT) to effectively detect and monitor the trans-Pacific transport of Asian dust and pollution. The aerosol optical depth (AOD) retrievals are used in assimilating the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem) in order to provide the model with an accurate representation of the aerosol spatial distribution across the Pacific. We conduct WRF-Chem model simulations of several cold-season atmospheric river events that interacted with Asian aerosols and brought significant precipitation over California during February-March 2011 when the NOAA CalWater field campaign was ongoing. The CalWater field campaign consisted of aircraft and surface measurements of aerosol and precipitation processes that help extensively validate our WRF-Chem model simulations. After validating the capability of the WRF-Chem in realistically simulating the aerosol-cloud precipitation interactions, we conduct sensitivity studies where the AOD is doubled to diagnose whether an increasing concentration of Asian aerosols over the western United States will lead to further impacts on the cloud and precipitation processes over California. We also perform sensitivity studies where the aerosols will be partitioned into dust-only and pollution-only in order to separate the impacts of the differing Asian aerosol species. The results of our WRF-Chem model simulations aim to show that the trans-Pacific transport of Asian aerosols influence the precipitation associated with atmospheric river events that can ultimately impact the regional climate of the western United States. 1 University
Naeger, Aaron R.↗
In Situ Wind and Turbulence Measurements in a Field of Full-Size Parabolic Trough Solar Collectors
Concentrated Solar Power (CSP) is a promising method for using Solar power for electricity generation with thermal energy storage. One of the primary drivers of structural design costs of CSP collector structures is wind loading. To date, the design of these structures has relied on data from wind tunnels that do not adequately capture the dynamic effects observed at scale. NREL initiated a field measurement campaign at the operational Nevada Solar One (NSO) powerplant that uses parabolic troughs as solar collectors. The aim of the project is a detailed characterization of prevailing wind and turbulence conditions and resulting operational loads on parabolic troughs, providing insights on structural dynamic response, and generating a first-of-a-kind, comprehensive, high-resolution wind-loading dataset available for validating simulations of wind loading on collector structures. The measurements at NSO consist of Sonic anemometers on masts at different heights to characterize the incoming flow and conditions within and above the trough field, in combination with a Doppler Lidar scanning the horizontal plane above the troughs. The wind measurements at NSO have been continuously operating since October 2021 and provide a year-long dataset characterizing wind and turbulence conditions. The structural load measurements start in November 2022 and will complement the wind measurements. In this poster, we present first results of the wind measurement campaign by highlighting days with different atmospheric flow conditions. We identified three main factors altering the flow over the parabolic troughs: Wind speed, wind direction, and the angle of the parabolic troughs. The highest loads are expected when the wind blows perpendicular to the trough rows. In this case, the first rows experience the highest loads and block the subsequent rows, creating conditions with decreased wind speed and enhanced turbulence within the trough field. Also, turbulent length scales change. These affected conditions produce unique load cases on the structures that will be captured by the load measurements. If the wind blows along the trough rows, wind and turbulence conditions are less influenced by the troughs.
atmospheric turbulence↗
In Situ Wind and Turbulence Measurements in a Field of Full-Size Parabolic Trough Collectors
Concentrated Solar Power (CSP) is a promising method for using Solar power for electricity generation with thermal energy storage. One of the primary drivers of structural design costs of CSP collector structures is wind loading. To date, the design of these structures has relied on data from wind tunnels that do not adequately capture the dynamic effects observed at scale. NREL initiated a field measurement campaign at the operational Nevada Solar One (NSO) powerplant that uses parabolic troughs as solar collectors. The aim of the project is a detailed characterization of prevailing wind and turbulence conditions and resulting operational loads on parabolic troughs, providing insights on structural dynamic response, and generating a first-of-a-kind, comprehensive, high-resolution wind-loading dataset available for validating simulations of wind loading on collector structures. The measurements at NSO consist of Sonic anemometers on masts at different heights to characterize the incoming flow and conditions within and above the trough field, in combination with a Doppler Lidar scanning the horizontal plane above the troughs. The wind measurements at NSO have been continuously operating since October 2021 and provide a year-long dataset characterizing wind and turbulence conditions. The structural load measurements start in November 2022 and will complement the wind measurements. In this poster, we present first results of the wind measurement campaign by highlighting days with different atmospheric flow conditions. We identified three main factors altering the flow over the parabolic troughs: Wind speed, wind direction, and the angle of the parabolic troughs. The highest loads are expected when the wind blows perpendicular to the trough rows. In this case, the first rows experience the highest loads and block the subsequent rows, creating conditions with decreased wind speed and enhanced turbulence within the trough field. Also, turbulent length scales change. These affected conditions produce unique load cases on the structures that will be captured by the load measurements. If the wind blows along the trough rows, wind and turbulence conditions are less influenced by the troughs.
concentrated solar power↗
The CHUVA Lightning Mapping Campaign
The primary science objective for the CHUVA lightning mapping campaign is to combine measurements of total lightning activity, lightning channel mapping, and detailed information on the locations of cloud charge regions of thunderstorms with the planned observations of the CHUVA (Cloud processes of tHe main precipitation systems in Brazil: A contribUtion to cloud resolVing modeling and to the GPM (GlobAl Precipitation Measurement) field campaign. The lightning campaign takes place during the CHUVA intensive observation period October-December 2011 in the vicinity of S o Luiz do Paraitinga with Brazilian, US, and European government, university and industry participants. Total lightning measurements that can be provided by ground-based regional 2-D and 3-D total lightning mapping networks coincident with overpasses of the Tropical Rainfall Measuring Mission Lightning Imaging Sensor (LIS) and the SEVIRI (Spinning Enhanced Visible and Infrared Imager) on the Meteosat Second Generation satellite in geostationary earth orbit will be used to generate proxy data sets for the next generation US and European geostationary satellites. Proxy data, which play an important role in the pre-launch mission development and in user readiness preparation, are used to develop and validate algorithms so that they will be ready for operational use quickly following the planned launch of the GOES-R Geostationary Lightning Mapper (GLM) in 2015 and the Meteosat Third Generation Lightning Imager (LI) in 2017. To date there is no well-characterized total lightning data set coincident with the imagers. Therefore, to take the greatest advantage of this opportunity to collect detailed and comprehensive total lightning data sets, test and validate multi-sensor nowcasting applications for the monitoring, tracking, warning, and prediction of severe and high impact weather, and to advance our knowledge of thunderstorm physics, extensive measurements from lightning mapping networks will be collected in conjunction with electric field mills, field change sensors, high speed cameras and other lightning sensors, dual-polarimetric radars, and aircraft in-situ microphysics which will allow for excellent cross-network inter-comparisons, assessments, and physical understanding.
Goodman, Steven J.↗
Detection of a magnetic region on HR 1099
The paper reports results of a magnetic field measuring campaign on the active K component of the RS CVn system HR 1099, using Zeeman-Doppler imaging. A localized magnetic field is detected near quadrature (phase 0.85). Assuming this magnetic region has a circular shape, its longitude and latitude are, respectively, estimated to be 86 + or - 4 deg and 5 + or - 5 deg. This equatorial region is largely monopolar, has a mean field strength of 985 + or - 270 G, covers 18 + or - 3 percent of the total stellar surface and may be colocalized with a bright photospheric spot.
Donati, J.-F.↗
Within‐field soil moisture variability and time‐invariant spatial structures of agricultural fields in the US Midwest
Abstract Understanding soil moisture variability and estimating high‐resolution soil moisture at subfield to field scales is critical for agricultural research and applications. However, systematic investigation of subfield scale soil moisture variability over cropland is still lacking from both measurement and satellite remote sensing. In this study, we aim to investigate (1) the characteristics of within‐field soil moisture distribution over typical cropland in the US Midwest and (2) the capabilities of satellite remote sensing in capturing the spatiotemporal variabilities of soil moisture at subfield scale. Specifically, we conducted soil moisture field experiments in three typical commercial agricultural fields (∼85 acres per field) in central Illinois, representing typical commercial farmlands in the US Midwest, and compared the soil moisture measurements with satellite remote sensing data from optical and active microwave sensors. In each field, dense soil moisture samples (spaced at 50–60 m) were obtained for two dry down events in May and July 2021, and multiple long‐term soil moisture stations were installed. We found prominent time‐invariant spatial structures of soil moisture at within‐field scales both during the dry down period and over longer time scales, and the stability is minimally affected by plant water use during the growing season. Comparing the field campaign measurements with satellite remote sensing data, we found that surface reflectance of shortwave infrared bands, such as SWIR1 (1610 nm) from Sentinel‐2, can capture relative surface soil moisture patterns at within‐field scales, but their relationships with soil moisture are field specific. These findings and the improved understanding of within‐field soil moisture dynamics could potentially help future research on high‐resolution soil moisture estimation with multi‐source remote sensing data.
Yang, Yi↗
Developing and Testing a Novel Stochastic Ice Microphysics Parameterization for Cloud and Climate Models Using ARM Field Campaign Data (Final Progress Report)
The major goals of this project were: 1) to use field campaign measurements from DOE’s Atmospheric Radiation Measurement (ARM) program to characterize variability of important parameters describing properties of ice particles in the atmosphere; 2) based on this observational analysis, to develop a parameterization scheme for weather and climate models that stochastically varies these parameters, and implement the new scheme into a weather model called the Weather Research and Forecasting model (WRF); 3) to use WRF coupled with the new stochastic scheme to simulate ARM field campaign thunderstorm cases and analyze how accounting for this parameter variability affects the model simulations. This work was performed jointly between the National Center for Atmospheric Research, University of Oklahoma, and University of Utah. To accomplish these goals, we extended an approach previously developed to characterize the variability in the size distribution of ice particles to parameters that are explicitly represented in models (i.e., relationships between ice particle mass and size, and between particle fall velocity and size). Our project was, to our knowledge, the first to apply observationally-constrained estimates of this parameter variability describing mass-size and fall velocity-size in a modeling framework. Our results showed efficacy of the approach, evaluated using ARM observations. Similarly, to our knowledge, work in this project was the first to propose and evaluate in detail a stochastic approach for unresolved turbulent mixing in high-resolution model simulations against detailed, benchmark large eddy simulations and ARM observations. Results showed some promising behavior, particularly with increased mixing and dilution of air in thunderstorm cores with surrounding environmental air, bringing the stochastic simulations closer to the benchmark large eddy simulations; however, results were somewhat degraded using stochastic mixing compared to observations from the AMIE/DYNAMO field campaign. This project also further refined and applied a modeling methodology called “piggybacking” that can robustly separate dynamical and thermodynamic impacts of model changes, and comparison studies of different models based on cases developed from ARM observations. Finally, this project directly supported three graduate students who completed their PhDs as well as a postdoctoral research fellow.
54 ENVIRONMENTAL SCIENCES↗
Wind Loading on Parabolic Trough Collectors: Wind and Structural Loads Measurements at an Operational Powerplant
Concentrated Solar Power (CSP) is a promising method for using solar power for electricity generation with thermal energy storage for industrial applications. Solar collectors constitute almost 1/3 of the total cost of the power plant. One of the primary drivers of unrealiability of these collectors is wind-driven loading of mirrors, support structures, and drives. To date, the design of the solar collector structures has relied on data from wind tunnels that do not adequately capture the dynamic effects observed at scale. NREL initiated a field measurement campaign at the operational Nevada Solar One (NSO) parabolic trough powerplant. At this plant, parabolic trough solar collectors track the sun from east to west in the course of a day and face varying wind loads depending on the wind properties and the angle of the troughs. The aim of the project is a detailed characterization of prevailing wind and turbulence conditions and resulting operational loads on parabolic troughs, providing insights into structural dynamic response, and generating a comprehensive wind-loading dataset for validating simulations of wind loading on collector structures. The measurements at NSO consist of sonic anemometers on masts at different heights to characterize the incoming flow and conditions at four trough rows at the edge of the trough field. In addition, a Doppler Lidar scans the horizontal plane above the troughs. The wind measurements at NSO have been continuously collecting data since October 2021 and are combined with structural load measurements that started in November 2022. The load measurements were installed on the same four outermost trough rows and include support structure bending moments, drive torque moments, dynamic accelerations of the spaceframe, mirror displacement, and tilt angles. Measurements are planned to continue until May 2023, providing a first-of-a-kind, high-resolution multi-month dataset of combined wind and load measurements. In this presentation, we show first results of the measurement campaign. Based on the measurements, we identified three main factors altering the flow over the parabolic troughs: Wind speed, wind direction, and the angle of the parabolic troughs. Most interactions between incoming wind and the trough field are observed when the wind blows perpendicular to the trough rows. In this case, the first rows experience the highest wind speed and block the downwind rows, creating conditions with decreased wind speed and enhanced turbulence within the trough field. Also, turbulent length scales are smaller after the first row. This leads to the highest static loads (bending and torque moments) at the first row but potentially increased dynamic loads within the field. We illustrate our findings with case studies focused on different wind conditions and will present fatigue analysis to highlight the impact of wind-driven loads on collector structures.
CSP collectors↗
Stewardship Best Practices for Improved Discovery and Reuse of Heterogeneous and Cross-Disciplinary Earth System Data
Some of the Earth system data products such as those from NASA airborne and field investigations (a.k.a. campaigns), are highly heterogeneous and cross-disciplinary, making the data extremely challenging to manage. For example, airborne and field campaign measurements tend to be sporadic over a period of time, with large gaps. Data products generated are of various processing levels and utilized for a wide range of inter- and cross-disciplinary research and applications. Data and derived products have been historically stored in a variety of domain-specific standard (and some non-standard) formats and in various locations such as NASA Distributed Active Archive Centers (DAACs), NASA airborne science facilities, field archives, or even individual scientists’ computer hard drives. As a result, airborne and field campaign data products have often been managed and represented differently, making it onerous for data users to find, access, and utilize campaign data. Some difficulties in discovering and accessing the campaign data originate from the incomplete data product and contextual metadata that may contain details relevant to the campaign (e.g. campaign acronym and instrument deployment locations), but tend to lack other significant information needed to understand conditions surrounding the data. Such details can be burdensome to locate after the conclusion of a campaign. Utilizing consistent terminology, essential for improved discovery and reuse, is also challenging due to the variety of involved disciplines. To help address the aforementioned challenges faced by many repositories and data managers handling airborne and field data, this presentation will describe stewardship practices developed by the Airborne Data Management Group (ADMG) within the Interagency Implementation and Advanced Concepts Team (IMPACT) under the NASA’s Earth Science Data systems (ESDS) Program.
best practices↗