Search NASA⌕ Search

SEARCH · Search NASA

Results for “flake”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

NSTAR Extended Life Test Discharge Chamber Flake Analysis

The Extended Life Test (ELT) of the NASA Solar Electric Propulsion Technology Readiness (NSTAR) ion thruster was concluded after 30,352 hours of operation. The ELT was conducted using the Deep Space 1 (DS1) back-up flight engine, a 30 cm diameter xenon ion thruster. Post-test inspection of the ELT engine revealed numerous contaminant flakes distributed over the bottom of the cylindrical section of the anode within the discharge chamber (DC). Extensive analyses were conducted to determine the source of the particles, which is critical to the understanding of degradation mechanisms of long life ion thruster operation. Analyses included: optical microscopy (OM) and particle length histograms, field emission scanning electron microscopy (FESEM) combined with energy dispersive spectroscopy (EDS), and atomic oxygen plasma exposure tests. Analyses of the particles indicate that the majority of the DC flakes consist of a layered structure, typically with either two or three layers. The flakes comprising two layers were typically found to have a molybdenum-rich (Mo-rich) layer on one side and a carbon-rich (C-rich) layer on the other side. The flakes comprising three layers were found to be sandwich-like structures with Mo-rich exterior layers and a C-rich interior layer. The presence of the C-rich layers indicates that these particles were produced by sputter deposition build-up on a surface external to the discharge chamber from ion sputter erosion of the graphite target in the test chamber. This contaminant layer became thick enough that particles spalled off, and then were electro-statically attracted into the ion thruster interior, where they were coated with Mo from internal sputter erosion of the screen grid and cathode components. Atomic oxygen tests provided evidence that the DC chamber flakes are composed of a significant fraction of carbon. Particle size histograms further indicated that the source of the particles was spalling of carbon flakes from downstream surfaces. Analyses of flakes taken from the downstream surface of the accelerator grid provided additional supportive information. The production of the downstream carbon flakes, and hence the potential problems associated with the flake particles in the ELT ion thruster engine is a facility induced effect and would not occur in the space environment.

deGroh, Kim K.↗
DOE OSTI2020

Surface Passivation by Excess Sulfur for Controlled Synthesis of Large, Thin SnS Flakes

Tin sulfide (SnS) is part of the group IV chalcogenides (SnX, GeX; X: S, Se), a family of anisotropic layered materials considered for thin film photovoltaics, optoelectronics, and valleytronics, and predicted narrow bandgap multiferroic materials. Large ultrathin SnS flakes, suitable for a variety of applications, are challenging to synthesize because of the enhanced surface reactivity due to the open layer structure of SnS which gives rise to a competition between lateral and vertical growth. Here we investigate the effects of added sulfur on passivating the surface and modifying the balance between lateral expansion and thickening of SnS flakes in chemical vapor transport from a SnS precursor. In addition, we investigate the growth of SnS flakes and compare the results of synthesis from a pure SnS precursor with growth, in which a slight excess of sulfur is supplied in different ways. Our results demonstrate that small amounts of excess sulfur can profoundly affect the size and thickness distributions of SnS flakes. The largest and thinnest flakes are obtained if (i) traces of sulfur are added and (ii) the sulfur source consists either of small Sx fragments released at high temperatures from the reactor walls, or atomic S supplied by sublimation from SnS 2 . The likely mechanism for the observed growth modifications is a transient surface passivation of SnS flakes during growth, which reduces the reactivity of the top facet of the flakes, limits vertical growth, and thus gives rise to ensembles with increased lateral size and reduced thickness.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Automated tabletop exfoliation and identification of monolayer graphene flakes

Over the past two decades, graphene has been intensively studied because of its remarkable mechanical, optical, and electronic properties. Initial studies were enabled by manual “Scotch Tape” exfoliation; nearly two decades later, this method is still widely used to obtain chemically pristine flakes of graphene and other 2D van der Waals materials. Unfortunately, the yield of large, pristine flakes with uniform thickness is inconsistent. Thus, significant time and effort are required to exfoliate and locate flakes suitable for fabricating multilayer van der Waals heterostructures. Here, we describe a relatively affordable tabletop device (the “eXfoliator”) that can reproducibly control key parameters and largely automate the exfoliation process. In a typical exfoliation run, the eXfoliator produces 3 or more large (≥ 400 μm 2 ) high-quality graphene monolayer flakes, allowing new users to produce such flakes at a rate comparable to manual exfoliation by an experienced user. Furthermore, we use an automated mapping system and a computer vision algorithm to locate candidate flakes. Our results provide a starting point for future research efforts to identify more precisely which parameters matter for the success of exfoliation and to optimize them.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Aging studies on chemical vapor deposition and mechanically exfoliated molybdenum disulfide flakes heated in ambient air

The structural integrity of atomically thin two-dimensional molybdenum disulfide (MoS 2 ) is crucial for high-temperature applications, including nanoelectronics and optoelectronics. This study explores the structural stability and electrical performance, under extended thermal exposure in air, of MoS 2 flakes synthesized via chemical vapor deposition (CVD) and mechanical exfoliation. The MoS 2 flakes, both CVD-grown and mechanically exfoliated, were subjected to heating at 200 °C with a relative humidity of 60(±5)% for a prolonged period and investigated with atomic force microscopy and Raman spectroscopy. This study shows that CVD-grown flakes developed noticeable cracks after prolonged heating, whereas mechanically exfoliated flakes mostly retained their structural integrity. Also, both types of flakes showed a decrease in layer thickness and lateral size over time, with mechanically exfoliated flakes exhibiting a comparatively smaller reduction in substrate coverage area. In addition, MoS 2 -based two-terminal devices were subjected to heating at 150 °C for approximately 1100 h, and their electrical characterization revealed a steady rise in current during constant voltage (5 V) conditions. This study enhances our understanding of MoS 2 stability and provides guidance for improving the reliability of MoS 2 -based devices in high-temperature electronic applications.

2D materials↗
DOE OSTI2024

Millimeter-Scale Exfoliation of hBN with Tunable Flake Thickness for Scalable Encapsulation

As a two-dimensional (2D) dielectric material, hexagonal boron nitride (hBN) is in high demand for applications in photonics, nonlinear optics, and nanoelectronics. Unfortunately, the high-throughput preparation of macroscopic-scale, high-quality hBN flakes with controlled thickness is an ongoing challenge, limiting device fabrication and technological integration. In this report we present a metal thin-film exfoliation method to prepare hBN flakes with millimeter-scale dimension, near-unity yields, and tunable flake thickness distribution from 1-7 layers, a substantial improvement over scotch tape exfoliation. The single crystallinity and high quality of the exfoliated hBN are demonstrated with optical microscopy, atomic force microscopy, Raman spectroscopy, and second harmonic generation. We further explore a possible mechanism for the effectiveness and selectivity based on thin-film residual stress measurements, density functional theory calculations, and transmission electron microscopy imaging of the deposited metal films. We find that the magnitude of the residual tensile stress induced by thin film deposition plays a key role in determining exfoliated flake thickness in a manner which closely resembles 3D semiconductor spalling. Lastly, we demonstrate that our exfoliated, large-area hBN flakes can be readily incorporated as encapsulating layers for other 2D monolayers. Altogether, this method brings us one step closer to the high throughput, mass production of hBN-based 2D photonic, optoelectronic, and quantum devices.

2D materials↗
DOE OSTI2022

Revealing room temperature ferromagnetism in exfoliated Fe 5 GeTe 2 flakes with quantum magnetic imaging

Van der Waals (vdW) material Fe 5 GeTe 2 , with its long-range ferromagnetic ordering near room temperature, has significant potential to become an enabling platform for implementing novel spintronic and quantum devices. To pave the way for applications, it is crucial to determine the magnetic properties when the thickness of Fe 5 GeTe 2 reaches the few-layers regime. However, this is highly challenging due to the need for a characterization technique that is local, highly sensitive, artifact-free, and operational with minimal fabrication. Prior studies have indicated that Curie temperature T C can reach up to close to room temperature for exfoliated Fe 5 GeTe 2 flakes, as measured via electrical transport; there is a need to validate these results with a measurement that reveals magnetism more directly. Here, we investigate the magnetic properties of exfoliated thin flakes of vdW magnet Fe 5 GeTe 2 via quantum magnetic imaging technique based on nitrogen vacancy centers in diamond. Through imaging the stray fields, we confirm room-temperature magnetic order in Fe 5 GeTe 2 thin flakes with thickness down to 7 units cell. The stray field patterns and their response to magnetizing fields with different polarities is consistent with previously reported perpendicular easy-axis anisotropy. Furthermore, we perform imaging at different temperatures and determine the Curie temperature of the flakes at ≈300 K. These results provide the basis for realizing a room-temperature monolayer ferromagnet with Fe 5 GeTe 2 . This work also demonstrates that the imaging technique enables rapid screening of multiple flakes simultaneously as well as time-resolved imaging for monitoring time-dependent magnetic behaviors, thereby paving the way towards high throughput characterization of potential two-dimensional (2D) magnets near room temperature and providing critical insights into the evolution of domain behaviors in 2D magnets due to degradation.

2D magnet↗
NASA NTRS1973

On the manganese content of cosmic flakes from deep-sea sediments

Cosmic flakes belong to the category of cosmic microparticles. They occur together with cosmic spherules in sediments. These flakes appear to represent ablation products of iron meteorites burnt away during the passage of a meteorite through the atmosphere by friction against air molecules. Microprobe analyses of flakes from deep sea deposits proved the particles to consist of magnetite which in most cases had been altered into maghemite in the outer zones. This is in agreement with the assumption that they represent fragments of fusion crust of iron meteorites. Most of the flakes, however, contained a small percentage of manganese. This element is not a common constituent of iron meteorites. An attempt is made to explain the presence of manganese in flakes and its absence in cosmic spherules.

Utech, K.↗
DOE OSTI2021

Luminescent and Magnetic Tb-MOF Flakes Deposited on Silicon

The synthesis of a terbium-based 2D metal–organic framework (MOF), of formula [Tb(MeCOO)(PhCOO) 2 ] (1), a crystalline material formed by neutral nanosheets held together by Van der Waals interactions, is presented. The material can be easily exfoliated by sonication and deposited onto different substrates. Uniform distributions of Tb-2D MOF flakes onto silicon were obtained by spin-coating. We report the luminescent and magnetic properties of the deposited flakes compared with those of the bulk. Complex 1 is luminescent in the visible and has a sizeable quantum yield of QY = 61% upon excitation at 280 nm. Photoluminescence measurements performed using a micro-Raman set up allowed us to characterize the luminescent spectra of individual flakes on silicon. Magnetization measurements of flakes-on-silicon with the applied magnetic field in-plane and out-of-plane display anisotropy. Ac susceptibility measurements show that 1 in bulk exhibits field-induced slow relaxation of the magnetization through two relaxation paths and the slowest one, with a relaxation time of τ lf ≈ 0.5 s, is assigned to a direct process mechanism. The reported exfoliation of lanthanide 2D-MOFs onto substrates is an attractive approach for the development of multifunctional materials and devices for different applications.

2D MOFs↗
DOE OSTI2026

Influence of Disorder on the Electronic Properties and Magnetotransport of Ti 3 C 2 T x Single-Flake Devices

The exploration of MXenes for electronic applications is a rapidly growing field in materials science. However, most research has focused on MXene films, with only a limited number of studies addressing the characterization of single-flake devices. In this work, we investigate the electronic and magnetotransport properties of Ti 3 C 2 T x single-flake devices, exploring the influence of structural defectivity on their transport mechanisms. We show that negative magnetoresistance present at low temperatures in single flake samples arises from weak localization, which we analyze to extract the phase coherence length of single-layer and multi-layer flakes. The study of magnetoresistance for this metallic MXene shows that the material exhibits quantum transport phenomena when intrinsic electronic behavior dominates. Moreover, by increasing the defect density via thermal annealing in ultrahigh vacuum, we uncover and characterize the metal-to-disordered metal transition in Ti 3 C 2 T x , shedding light on new properties and enriching fundamental knowledge about MXenes.

MXenes↗
DOE OSTI2023

Above-Room-Temperature Ferromagnetism in Thin van der Waals Flakes of Cobalt-Substituted Fe 5 GeTe 2

Two-dimensional (2D) magnetic van der Waals materials provide a powerful platform for studying the fundamental physics of low-dimensional magnetism, engineering novel magnetic phases, and enabling thin and highly tunable spintronic devices. To realize high-quality and practical devices for such applications, there is a critical need for robust 2D magnets with ordering temperatures above room temperature that can be created via exfoliation. Here, in this paper, the study of exfoliated flakes of cobalt-substituted Fe 5 GeTe 2 (CFGT) exhibiting magnetism above room temperature is reported. Via quantum magnetic imaging with nitrogen-vacancy centers in diamond, ferromagnetism at room temperature was observed in CFGT flakes as thin as 16 nm corresponding to 16 layers. This result expands the portfolio of thin room-temperature 2D magnet flakes exfoliated from robust single crystals that reach a thickness regime relevant to practical spintronic applications. The Curie temperature T c of CFGT ranges from 310 K in the thinnest flake studied to 328 K in the bulk. To investigate the prospect of high-temperature monolayer ferromagnetism, Monte Carlo calculations were performed, which predicted a high value of T c of ~270 K in CFGT monolayers. Pathways toward further enhancing monolayer T c are discussed. These results support CFGT as a promising platform for realizing high-quality room-temperature 2D magnet devices.

2D magnetism↗
DOE OSTI2021

Induced anomalous Hall effect of massive Dirac fermionsin ZrTe 5 and HfTe 5 thin flakes

Research on the anomalous Hall effect (AHE) has been lasting for a century to make clear the underlying physical mechanism. Generally, the AHE appears in magnetic materials, in which the extrinsic process related to scattering effects and intrinsic contribution connected with Berry curvature are crucial. Recently, AHE has been counterintuitively observed in nonmagnetic topological materials and attributed to the existence of Weyl points. However, the Weyl point scenario would lead to unsaturated AHE even in large magnetic fields and contradicts the saturation of AHE in several tesla (T) in experiments. In this work, we investigate the Hall effect of ZrTe 5 and HfTe 5 thin flakes in static ultrahigh magnetic fields up to 33 T. We find the AHE saturates to 55(70)Ω 1 cm 1 for ZrTe 5 (HfTe 5 ) thin flakes above ~10T. Combining detailed magnetotransport experiments and Berry curvature calculations, we clarify that the splitting of massive Dirac bands without Weyl points can be responsible for AHE in nonmagnetic topological materials ZrTe 5 and HfTe 5 thin flakes. This model can identify our thin flake samples to be weak topological insulators and serve as a tool to probe the band structure topology in topological materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Electrical and Elastic Properties of Individual Single-Layer Nb 4 C 3 T x MXene Flakes

2D carbides and nitrides (MXenes) are widely recognized for their exceptional promise for numerous applications. However, physical property measurements of their individual monolayers remain very limited despite their importance for revealing the intrinsic physical properties of MXenes. The first mechanical and electrical measurements of individual single-layer flakes of Nb 4 C 3 T x MXene, which are prepared via an improved synthetic method are reported. Characterization of field-effect transistor devices based on individual single-layer Nb 4 C 3 T x flakes shows an electrical conductivity of 1024 ± 165 S cm -1 , which is two orders of magnitude higher than the previously reported values for bulk Nb 4 C 3 T x assemblies, and an electron mobility of 0.41 ± 0.27 cm 2 V -1 s -1 . Atomic force microscopy nanoindentation measurements of monolayer Nb 4 C 3 T x membranes yield an effective Young's modulus of 386 ± 13 GPa, assuming a membrane thickness of 1.26 nm. This is the highest value reported for nanoindentation measurements of solution-processable 2D materials, revealing the potential of Nb 4 C 3 T x as a primary component for various mechanical applications. In conclusion, the agreement between the mechanical properties of 2D Nb 4 C 3 T x MXene and cubic NbC suggests that the extensive experimental data on bulk carbides could be useful for identifying new MXenes with improved functional characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tunable discrete scale invariance in transition-metal pentatelluride flakes

Log-periodic quantum oscillations discovered in transition-metal pentatelluride give a clear demonstration of discrete scale invariance (DSI) in solid-state materials. The peculiar phenomenon is convincingly interpreted as the presence of two-body quasi-bound states in a Coulomb potential. However, the modifications of the Coulomb interactions in many-body systems having a Dirac-like spectrum are not fully understood. Here, we report the observation of tunable log-periodic oscillations and DSI in ZrTe 5 and HfTe 5 flakes. By reducing the flakes thickness, the characteristic scale factor is tuned to a much smaller value due to the reduction of the vacuum polarization effect. The decreasing of the scale factor demonstrates the many-body effect on the DSI, which has rarely been discussed hitherto. Furthermore, the cut-offs of oscillations are quantitatively explained by considering the Thomas-Fermi screening effect. Finally, our work clarifies the many-body effect on DSI and paves a way to tune the DSI in quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Manipulating high-temperature superconductivity by oxygen doping in Bi2Sr2CaCu2O8+δ thin flakes

Abstract Harnessing the fascinating properties of correlated oxides requires precise control of their carrier density. Compared to other methods, oxygen doping provides an effective and more direct way to tune the electronic properties of correlated oxides. Although several approaches, such as thermal annealing and oxygen migration, have been introduced to change the oxygen content, a continuous and reversible solution that can be integrated with modern electronic technology is much in demand. Here, we report a novel ionic field-effect transistor using solid Gd-doped CeO2 as the gate dielectric, which shows a remarkable carrier-density-tuning ability via electric-field-controlled oxygen concentration at room temperature. In Bi2Sr2CaCu2O8+δ (Bi-2212) thin flakes, we achieve a reversible superconductor–insulator transition by driving oxygen ions in and out of the samples with electric fields, and map out the phase diagram all the way from the insulating regime to the over-doped superconducting regime by continuously changing the oxygen doping level. Scaling analysis indicates that the reversible superconductor–insulator transition for the Bi-2212 thin flakes follows the theoretical description of a two-dimensional quantum phase transition. Our work provides a route for realizing electric-field control of phase transition in correlated oxides. Moreover, the configuration of this type of transistor makes heterostructure/interface engineering possible, thus having the potential to serve as the next-generation all-solid-state field-effect transistor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Crossover behavior in the magnetoresistance of thin flakes of the topological material ZrTe 5

ZrTe 5 is a layered material that exhibits intricate topological effects. Intensive theoretically and experimental efforts have been devoted to try to understand the physics in this materials. In this paper the temperature dependent magneto-transport properties of ZrTe 5 thin flakes are investigated. A characteristic temperature T* is observed in the temperature dependence of three different types of magnetoresistance simultaneously, which are the saturated Hall anomaly, the chiral anomaly and the longitudinal magnetoresistance. Furthermore, the value of T* decreases monotonically from 200K to 160K with increasing thickness of the ZrTe 5 thin flakes from 42nm to 89nm. Temperature induced topological phase transitions are attributed to the cause of such anomaly in the three types of magnetoresistance at T*. Overall, our findings provide a multi-parameter indicator for the emergence of topological phase transition in ZrTe 5 and could be extended to the study of other topological materials. The temperature dependence of the three types of magnetoresistance also shed light on the role of anomalous Hall Effect in the transport properties of ZrTe 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Characterizing sample degradation from synchrotron based X-ray measurements of ultra-thin exfoliated flakes

It is undeniable that novel 2D devices and heterostructures will have a lasting impact on the advancement of future technologies. However, the inherent instability of many exfoliated van der Waals (vdW) materials is a well-known hurdle yet to be overcome. Thus, the sustained interest in exfoliated vdW materials underscores the importance of understanding the mechanisms of sample degradation to establish proactive protective measures. Here, the impact of prolonged synchrotron-based X-ray beam exposure on exfoliated flakes of two contemporary vdW materials, NiPS 3 and α-RuCl 3 , is explored using resonant inelastic X-ray scattering (RIXS) and total fluorescence yield X-ray absorption spectroscopy (XAS). In NiPS 3 , the resulting RIXS and XAS spectra show a suppression, then vanishing, of NiS 6 multiplet excitations coupled with an upward shift of the peak energy of the XAS as a function of X-ray dose. In α-RuCl 3 , the signs of beam damage from the RIXS spectra are less evident. However, the post-experiment characterization of both materials using Raman spectroscopy exhibits signals of an amorphous and disordered system compared to pristine flakes; in addition, energy-dispersive X-ray spectroscopy of NiPS 3 shows evidence of ligand vacancies. As synchrotron radiation is fast becoming a required probe to study 2D vdW materials, these findings lay the groundwork for the development of future protective measures for synchrotron-based prolonged X-ray beam exposure, as well as for X-ray free electron laser.

2D magnetism↗
NASA NTRS1986

Apparatus for producing diamond-like carbon flakes

A vacuum arc from a spot at the face of a graphite cathode to a graphite anode produces a beam of carbon ions and atoms. A carbon coating from this beam is deposited on an ion beam sputtered target to produce diamond-like carbon flakes. A graphite tube encloses the cathode, and electrical isolation is provided by an insulating sleeve. The tube forces the vacuum arc spot to be confined to the surface on the outermost end of the cathode. Without the tube the arc spot will wander to the side of the cathode. This spot movement results in low rates of carbon deposition, and the properties of the deposited flakes are more graphite-like than diamond-like.

Banks, Bruce A.↗
DOE OSTI2025

Unusually Strong Near‐Infrared Photoluminescence of Highly Transparent Bulk InSe Flakes

Abstract Bulk γ‐InSe has a direct bandgap of 1.24 eV, which corresponds to near infrared wavelengths ( λ = 1.0 µm) useful in optoelectronic applications from biometric detectors to silicon photonics. However, its potential for optoelectronic applications is largely untapped due in part to the lack of quantitative studies of its optical properties. Here, the unusually low absorptance and high photoluminescence quantum efficiency of single‐crystalline InSe flakes with thickness in the hundreds of nanometers are studied. InSe emits brightly at room temperature from its direct bandgap with a peak photoluminescence quantum yield (PLQY) of 20%, despite displaying indirect bandgap like low absorption coefficient due to the symmetry of its crystal structure. By performing pump‐dependent PLQY measurements, the radiative and nonradiative recombination coefficients are extracted, including the Shockley‐Read‐Hall and Auger coefficients. Finally, a proof‐of‐concept alternating current electroluminescent device at low temperature is demonstrated to show the promise of InSe in optoelectronic technology such as highly transparent, bright NIR light sources.

Geng, Jamie↗