SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This work will demonstrate the power of MFIX-Exa in design, scaleup and optimization of a 2500 ton-per-day (tpd) unit for a Biogenic Fluid Catalytic Cracking (BFCC) catalyst regeneration reactor for BETO CCPC project.
Catalytic Fast Pyrolysis (CFP) is a process that converts biomass into liquid intermediates suitable for transportation fuels by rapidly heating it in the presence of a catalyst, aiming to produce stable oils with reduced oxygen content. During CFP, the catalyst can become deactivated by the accumulation of coke, a carbon-rich deposit formed from the decomposition of biomass components. Unlike in petroleum refining, regenerating coked catalysts from biomass pyrolysis requires specific approaches due to the different chemical nature of the coke formed. An experimental technique, Temperature Programmed Oxidation (TPO), was used to study the de-coking process by gradually increasing temperature while monitoring the production of CO and CO2, which provides data for kinetic modeling. Utilizing data from TPO experiments, coke combustion kinetic model was developed to describe the rate of coke removal at different temperatures, allowing for simulation of regeneration processes. Then kinetic model is integrated into MFIX-Exa for the simulation of Biogenic Fluid Catalytic Cracker (BFCC) regenerator at different scales, enabling analysis of catalyst flow, temperature distribution, and regeneration efficiency under various operating conditions.
Not Available
Co-processing of biogenic feedstocks within the existing petroleum infrastructure represents an opportunity to incorporate large volumes of bio-carbon into transportation fuels. However, upgrading intermediate liquids from biomass and waste to final products efficiently and economically, while minimizing impacts to existing refinery infrastructure, remains a notable barrier to commercialization. The co-processing project, Bio-oil Co-processing with Refinery Streams, aimed to generate foundational knowledge for processing renewable intermediates in petroleum refineries and offer co-processing strategies, as well as develop new methods for biogenic carbon tracking and measurement.
Mild direct coal liquefaction (autogenous pressure, no catalyst, no H2 gas) of Springfield coal in fluid catalytic cracking decant oil is shown to effectively produce coal extract precursors to spinnable mesophase pitch. Here this work demonstrates that the coal extract can be thermally treated to obtain mesophase pitch in a facile one-step process, bypassing the production of an intermediate isotropic pitch. Furthermore, the presence of 25 wt.% coal in the initial slurry can increase the yield to mesophase pitch nearly twofold and yield to carbon fiber by approximately 70%. The coal extract-derived mesophase pitch was melt-spun and heat treated to produce carbon fiber with graphitic texture, high modulus (>400 GPa) and tensile strength up to 943 MPa. Overall, this work demonstrates that coal can be effectively utilized to markedly amplify the mesophase pitch and carbon fiber yield from fluid catalytic cracking decant oil by relatively simple processing, while conserving utility as a precursor to high performance carbon fiber and potentially other high value graphitic products.
Increasing renewable carbon incorporation into conventional fuels through coprocessing with vacuum gas oil (VGO, a petroleum refining feedstock) is a critical step in biofuels development, scaling-up, adoption and associated GHG reduction. Optimization of the co-processing parameters maximizes incorporation of the renewable carbon in the fuel products. Quantitative determination of the renewable carbon content in the co-processed products provides direct evaluation of the parameters. The co-processing bio-oil with VGO through hydrocracking (HC) or fluid catalytic cracking (FCC) system resulted in carbon isotopic fractionation that prevented the direct use of the isotope mixing model for quantifying the renewable carbon. Here, we report an algorithm of using a stable carbon isotope approach to quantify the renewable carbon content in co-processing biofuel products through high-precision ?13C analysis. A controlled experiment carried out by blending a fossil diesel (-29.013‰) with a bio-diesel (-30.099‰) at various blending levels up to 98.0/2.0 wt% is presented and has demonstrated the applicability of this approach. The carbon isotope fractionation factors for the bio-oil co-processing were obtained by using a 14C-derived isotope-mixing model. The ?13C method was tested by co-processing 13C-labeled bio-crude and natural woody biomass-derived fast pyrolysis (FP) and catalytic fast pyrolysis (CFP) bio-oils with VGO. The results were verified by 14C accelerator mass spectrometry (AMS) method (ASTM-D6866) and compared with the yield mass balance (YMB) method. Strong agreement between d13C and 14C AMS methods demonstrated the applicability of the ?13C method to quantify renewable carbon content in co-processing fuel products and guide the co-processing optimization
Conventional ethylene production heavily depends on fossil-derived feedstocks via steam cracking, a very energy- and emission-intensive process. Researchers have been exploring alternatives to reduce CO 2 emissions including producing ethylene from biobased feedstocks. This paper evaluates the cradle-to-gate greenhouse gas (GHG) emissions of bioethylene produced from U.S. corn ethanol. The analysis includes different pathways for the dehydration of corn ethanol to ethylene and co-processing routes via fluid catalytic cracking (FCC) processes. For the FCC co-processing route carbon-14 analysis is used to determine bioethanol yields. A 127% reduction in life cycle GHG emissions of bioethylene is estimated compared to fossil-derived ethylene for the base case. Additional case studies are also discussed to understand the reduction of GHG emissions due to sustainable corn farming and renewable power use, biogenic carbon capture, and fuel switch with biofuels at the ethanol plant, and its impact on bioethylene GHG emissions.
NREL's Economic, Sustainability, and Market Analysis (ESMA) team develops process models in Aspen Plus to support techno-economic analysis (TEA) and life-cycle assessment (LCA) of conversion pathways from renewable and circular resources to fuels and chemicals. These tools are being applied to assess probable operational constraints or bottlenecks associated with refinery co-processing and repurposing opportunities. The team also utilizes optimizable refinery models to quantify opportunities for biofuel and bioproduct pathways through integration with existing refining infrastructure. The goals of analysis are to model the transition of refineries to renewable and circular feedstocks and quantify the costs production and CO2 abatement through utilization of existing refineries. At the core of the ESMA team's work is the process data derived from conversion experiments on hydroprocessing and fluid catalytic cracking performed at NREL. The objective of this presentation is to highlight new analysis approaches and capabilities in pathway analysis and refinery optimization modeling with specific emphasis on integration of experimental data.
Recent work at the National Renewable Energy Laboratory (NREL) and throughout the bioenergy community has highlighted incentives associated with co-processing bio-intermediates in existing refineries to reduce capital costs associated with renewable fuels and chemicals production and reduce overall risk for emerging biomass conversion technologies. This presentation summarizes the techno-economic analysis results from the NREL-Petrobras collaboration that focused on refinery integration of fast pyrolysis oil through co-processing in the fluid catalytic cracking (FCC) process. The NREL-Petrobras work highlights the economic opportunity for refiners to engage in co-processing for low-carbon products and introduces the risks for refiners based on variability in crude and fossil-product markets. The NREL-Petrobras results also serve as a basis to inform policy design that reduces economic risk for refinery co-processing and repurposing opportunities. The final topics in the presentation highlight experimental capabilities and emerging analysis approaches at NREL and partner laboratories that support the development and commercial deployment of refinery utilization strategies.
Co-processing bio-oils with petroleum-derived feeds in the existing multitrillion dollar refining and distribution infrastructure is an attractive option for introducing renewable energy into the fuels marketplace. Considerable research on co-processing bio-oils and vacuum gas oil (VGO) in fluid catalytic cracking units (FCC) using equilibrium catalysts (E-Cats) demonstrated that biomass-derived molecules decreased activity of and increased carbon laydown on E-Cat. In this work, 13 C-labeled biomass was co-processed with VGO using either an E-Cat or a proprietary zeolite Johnson Matthey catalyst (CP758), which is optimzed for upgrading biomass vapors in a riser reactor, to evaluate the fate of biogenic carbon in FCC products. The results from both catalysts indicate that biogenic carbon was incorporated into alkenes and aromatic hydrocarbons. While no biogenic carbon was found in linear alkanes, it was observed in cycloalkanes during experiments with E-Cat but not with CP758. All produced CO2 was biogenic as was most of the carbon laydown on the catalysts. Several partially deoxygenated biomass compounds, such as alkylphenols and benzofurans, unexpectedly contained small amounts of carbon from VGO. Although this study was conducted with labeled biomass and not bio-oil, it provides insights to reaction mechanisms for co-processing bio-oil and VGO in an FCC, which is required to develop catalysts that efficiently convert bio-oil components during FCC co-processing. This work also demonstrates that comprehensive catalyst development utilizing both biomass- and fossil-derived feeds is required to maximize the incorporation of biogenic carbon into transportation fuels.
Propylene is an important petrochemical that is used in various industries, including the automobile and polymer sectors. Conventionally, propylene has been produced through fluid catalytic cracking, steam cracking, and propane dehydrogenation. In this project, a novel process to produce propylene from polypropylene plastic waste using a microwave reactor is introduced. Propylene production is simulated in Aspen Plus for both the conventional propane dehydrogenation process and the novel design, with heat integration applied to minimize utility demands and the conventional process serving as the base case for comparison. Finally, a tailored technoeconomic analysis is carried out for both simulated cases to estimate important economic indicators. Analysis of the results shows that the novel microwave-assisted process outperforms the conventional route for propylene production, achieving a single-pass conversion of almost 100%, compared with only 33.8% in the conventional plant. The Net Present Value of the novel plant is $\$1720.3$ MM, which is 3.5 times higher than the conventional process, while the Levelized Cost of Propylene is reduced by 40%. Capital and operating expenditure are also improved in the proposed scheme, with reductions of approximately $\$29$ MM and $\$222$ MM/yr, respectively. In addition to cost savings, this novel process also provides a convenient means to recycle waste polypropylene.
Petroleum refineries increasingly seek to generate fuels with lower carbon intensities (CIs; a measure of life cycle greenhouse gas [GHG] emissions per unit of energy of fuel; well-to-wheel [WTW]) to meet growing demand. Co-processing refers to a process that adds biomass-derived feedstocks to the fossil-based feedstocks of existing petroleum refinery process units. With the use of biofeedstocks, it is expected that co-processed fuels would have lower CIs than their petroleum counterparts without requiring changes in the existing infrastructure for producing, transporting, and using fuels. To quantify the GHG emissions reduction benefits of co-processing, this study uses a linear programming model to simulate petroleum refinery conditions with and without co-processing. The co-processing cases include three biofeedstocks (soy oil, tallow, and used cooking oil or UCO) used as 10 vol.% of the feedstock to a hydrotreater or hydrocracker since these lipid-based feedstocks have favorable properties to be treated in a hydrotreater or hydrocracker. In addition, we considered pyrolysis oil used as 10 vol.% of the feedstock to a fluid catalytic cracking (FCC) unit in the modeled refinery due to its higher oxygen content compared to other lipid-based feedstocks. Life cycle analysis (LCA) using two distinct approaches—process-level energy allocation and a refinery-level marginal approach—has been conducted for each case. The LCA results using process-level allocation show that there are no noticeable changes in emissions or energy use impacts at the facility level. The life cycle GHG emission reductions of co-processing cases are mainly related to the fraction of biogenic carbon embedded in each fuel product. For example, co-processed jet fuels (a mixture of fossil and biogenic fuels) made via hydrotreating or hydrocracking have higher biogenic carbon, which results in jet fuel CI reductions of 3.9%–8.6% compared to the CI of baseline petroleum jet fuels on a WTW basis. However, analysis of co-processed pyrolysis oil in an FCC shows that a higher fraction of biofeedstocks (29%) becomes process emissions (i.e., CO and CO 2 ), mainly due to the oxygenates in pyrolysis oil, and so it generates less renewable fuel than biofeedstocks co-processed via hydrotreating or hydrocracking. Using the refinery-level marginal approach, the changes in energy use and emissions of co-processing cases compared to the petroleum-only baseline case are allocated to the changes in fuel production (assuming renewable fuels). This approach generates the life cycle GHG emission values of co-processed renewable fuels, which are comparable to the CIs of standalone biofuel production pathways. However, as this approach relies on a rough assumption that product yields and emissions from co-processing units on fossil feedstocks remain the same with and without biofeedstock inputs, co-processing cases like FCC pyrolysis oil may generate quite skewed results.
Online process monitoring coupled with rapid predictive tools will be essential to refineries of the future to provide real-time feedback and process control on new, renewable feeds and their accompanying processes and products. This project will provide refinery operators with tools to predict product component concentrations in minutes from online, slip stream mass spectra, allowing for rapid detection of off-specification product. We will arrive at a template for predictive tool generation through the development of a specific tool as a starting point -- co-processing of pyrolysis oils and vacuum gas oil over fluid catalytic cracking (FCC) catalysts.
The Davison circulating riser (DCR) is the National Renewable Energy Laboratory's (NREL's) pilot-scale recirculating riser reactor system. Coupled with an upstream fluid-bed pyrolysis system, it permits evaluation of catalytic cracking of biogenic feedstocks, as well as coprocessing of biogenic and fossil feedstocks in a commercially relevant pilot fluid catalytic cracker.
Here we present a methodology for modeling multi-step reaction rates in porous catalyst particles for use in CFD-DEM and two fluid models. Single-step effectiveness factors based on a Thiele modulus, while useful, cannot accurately capture the cascading reaction systems common in high temperature vapor-phase chemical reactors like fluidized catalytic cracking units and catalytic biomass fast pyrolysis systems. Instead, multi-step effectiveness vectors derived from steady-state solutions to the governing reaction-diffusion equations are needed. Solutions for various catalyst shapes are presented, including spheres, cylinders, and prisms. Computational challenges inherent in repeated evaluation of reaction rates with diffusion limitations are discussed, and an efficient implementation based on pre-computed lookup tables is proposed and demonstrated on a simulation of a fluidized bed reactor. Open-source code is provided for the compilation of reaction rate tables for use in ODE, DEM, and two-fluid models.
Ammonia is viewed as a viable hydrogen carrier due to favorable storage and transport characteristics. While it can be re-converted to hydrogen at point-of-use via thermal catalytic cracking, direct utilization in combustion systems can result in reduced costs and improved efficiency. A major barrier to this approach is the low flammability and potential for high nitrogen oxide emissions, driven by fuel-bound nitrogen and complex kinetic pathways. While a number of kinetic mechanisms currently exist for simulating ammonia combustion, a major need continues to be direct information about species profiles in easy-to-model systems capable of isolating chemical kinetics from multi-dimensional fluid dynamic effects. This paper reports on recent species measurements made in a flat flame burner using a combined tunable-diode-laser-absorption-spectroscopy (TDLAS) and chemiluminescence imaging approach. Three flame conditions were included representative of NH3/H2 blends, partially cracked NH3 (inc. N2), and 100% NH3 with enhanced air (30% oxygen). Two NIR distributed feedback (DFB) laser diodes were used to determine H2O concentration and temperature (via ratio thermometry) at various radial and axial positions, after which an inverse Abel transform was used to infer centerline values. Companion images were collected using a Princeton Instrument PI-MAX intensified camera equipped with a 105mm UV lens and multiple filter sets targeting OH*, NH*, and NH2* emission. Results were compared to companion Cantera burner-stabilized flame simulations using various kinetic mechanisms. A recent mechanism including excited species chemistry was also included, to investigate whether excited and ground state profiles exhibit significant differences.