SEARCH · Search NASA

Results for “forest structural attribute”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Long-Term Impacts of Selective Logging on Amazon Forest Dynamics from Multi-Temporal Airborne LiDAR

Forest degradation is common in tropical landscapes, but estimates of the extent and duration of degradation impacts are highly uncertain. In particular, selective logging is a form of forest degradation that alters canopy structure and function, with persistent ecological impacts following forest harvest. In this study, we employed airborne laser scanning in 2012 and 2014 to estimate three-dimensional changes in the forest canopy and understory structure and aboveground biomass following reduced-impact selective logging in a site in Eastern Amazon. Also, we developed a binary classification model to distinguish intact versus logged forests. We found that canopy gap frequency was significantly higher in logged versus intact forests even after 8 years (the time span of our study). In contrast, the understory of logged areas could not be distinguished from the understory of intact forests after 6–7 years of logging activities. Measuring new gap formation between LiDAR acquisitions in 2012 and 2014, we showed rates 2 to 7 times higher in logged areas compared to intact forests. New gaps were spatially clumped with 76 to 89% of new gaps within 5 m of prior logging damage. The biomass dynamics in areas logged between the two LiDAR acquisitions was clearly detected with an average estimated loss of -4.14 +/- 0.76 MgC/hay. In areas recovering from logging prior to the first acquisition, we estimated biomass gains close to zero. Together, our findings unravel the magnitude and duration of delayed impacts of selective logging in forest structural attributes, confirm the high potential of airborne LiDAR multitemporal data to characterize forest degradation in the tropics, and present a novel approach to forest classification using LiDAR data.

Pinage, Ekena Rangel↗

NASA NTRS2007

Simulation Studies of Forest Structure using 3D Lidar and Radar Models

The use of lidars and radars to measure forest structure attributes such as height and biomass are being considered for future Earth Observation missions. Large footprint lidar makes a direct measurement of the heights of scatterers in the illuminated footprint and can yield information about the vertical profile of the canopy. Synthetic Aperture Radar (SAR) is known to sense the canopy volume, especially at longer wavelengths and is useful for estimating biomass. Interferometric SAR (InSAR) has been shown to yield forest canopy height information. For example, the height of scattering phase retrieved from InSAR data is considered to be correlated with the three height and the spatial structure of the forest stand. There is much interest in exploiting these technologies separately and together to get important information for carbon cycle and ecosystem science. More detailed information of the electromagnetic radiation interactions within forest canopies is needed. And backscattering models can be of much utility here. As part of a NASA funded project to explore data fusion, a three-dimensional (3D) coherent radar backscattering model and a 3D lidar backscatter models were used to investigate the use of large footprint lidar, SAR and InSAR for characterizing realistic forest scenes. For this paper, we use stem maps and other forest measurements to develop a realistic spatial structure of a spruce-hemlock forest canopy found in Maine, USA. The radar and lidar models used measurements of the 3D forest scene as input and simulated the coherent radar backscattering signature and 1064nm energy backscatter, respectively. The relationships of backscatter derived forest structure were compared with field measurements. In addition, we also had detailed airborne lidar (Laser Imaging Vegetation Sensor, LVIS) data available over the stem map sites that was used to study the accuracies of tree height derived from modeled SAR backscatter and the scattering phase center retrieved from the simulated InSAR data will be compared with the height indices, or other structure parameters derived from the lidar data. These results will address the possible synergies between lidar and radar in data in terms of forest structural information.

Sun, Guoqing↗

NASA NTRS2011

Forest Biomass Mapping From Lidar and Radar Synergies

The use of lidar and radar instruments to measure forest structure attributes such as height and biomass at global scales is being considered for a future Earth Observation satellite mission, DESDynI (Deformation, Ecosystem Structure, and Dynamics of Ice). Large footprint lidar makes a direct measurement of the heights of scatterers in the illuminated footprint and can yield accurate information about the vertical profile of the canopy within lidar footprint samples. Synthetic Aperture Radar (SAR) is known to sense the canopy volume, especially at longer wavelengths and provides image data. Methods for biomass mapping by a combination of lidar sampling and radar mapping need to be developed. In this study, several issues in this respect were investigated using aircraft borne lidar and SAR data in Howland, Maine, USA. The stepwise regression selected the height indices rh50 and rh75 of the Laser Vegetation Imaging Sensor (LVIS) data for predicting field measured biomass with a R(exp 2) of 0.71 and RMSE of 31.33 Mg/ha. The above-ground biomass map generated from this regression model was considered to represent the true biomass of the area and used as a reference map since no better biomass map exists for the area. Random samples were taken from the biomass map and the correlation between the sampled biomass and co-located SAR signature was studied. The best models were used to extend the biomass from lidar samples into all forested areas in the study area, which mimics a procedure that could be used for the future DESDYnI Mission. It was found that depending on the data types used (quad-pol or dual-pol) the SAR data can predict the lidar biomass samples with R2 of 0.63-0.71, RMSE of 32.0-28.2 Mg/ha up to biomass levels of 200-250 Mg/ha. The mean biomass of the study area calculated from the biomass maps generated by lidar- SAR synergy 63 was within 10% of the reference biomass map derived from LVIS data. The results from this study are preliminary, but do show the potential of the combined use of lidar samples and radar imagery for forest biomass mapping. Various issues regarding lidar/radar data synergies for biomass mapping are discussed in the paper.

Sun, Guoqing↗

NASA NTRS1992

Estimating structural attributes of Douglas-fir/western hemlock forest stands from Landsat and SPOT imagery

Relationships between spectral and texture variables derived from SPOT HRV 10 m panchromatic and Landsat TM 30 m multispectral data and 16 forest stand structural attributes is evaluated to determine the utility of satellite data for analysis of hemlock forests west of the Cascade Mountains crest in Oregon and Washington, USA. Texture of the HRV data was found to be strongly related to many of the stand attributes evaluated, whereas TM texture was weakly related to all attributes. Data analysis based on regression models indicates that both TM and HRV imagery should yield equally accurate estimates of forest age class and stand structure. It is concluded that the satellite data are a valuable source for estimation of the standard deviation of tree sizes, mean size and density of trees in the upper canopy layers, a structural complexity index, and stand age.

Cohen, Warren B.↗

NASA NTRS2004

Forest Attributes from Radar Interferometric Structure and its Fusion with Optical Remote Sensing

The possibility of global, three-dimensional remote sensing of forest structure with interferometric synthetic aperture radar (InSAR) bears on important forest ecological processes, particularly the carbon cycle. InSAR supplements two-dimensional remote sensing with information in the vertical dimension. Its strengths in potential for global coverage complement those of lidar (light detecting and ranging), which has the potential for high-accuracy vertical profiles over small areas. InSAR derives its sensitivity to forest vertical structure from the differences in signals received by two, spatially separate radar receivers. Estimation of parameters describing vertical structure requires multiple-polarization, multiple-frequency, or multiple-baseline InSAR. Combining InSAR with complementary remote sensing techniques, such as hyperspectral optical imaging and lidar, can enhance vertical-structure estimates and consequent biophysical quantities of importance to ecologists, such as biomass. Future InSAR experiments will supplement recent airborne and spaceborne demonstrations, and together with inputs from ecologists regarding structure, they will suggest designs for future spaceborne strategies for measuring global vegetation structure.

InSAR↗

NASA NTRS2020

Forest Potential Productivity Mapping by Linking Remote-Sensing-Derived Metrics to Site Variables

A fine-resolution region-wide map of forest site productivity is an essential need for effective large-scale forestry planning and management. In this study, we incorporated Sentinel-2 satellite data into an increment-based measure of forest productivity (biomass growth index (BGI)) derived from climate, lithology, soils, and topographic metrics to map improved BGI (iBGI) in parts of North American Acadian regions. Initially, several Sentinel-2 variables including nine single spectral bands and 12 spectral vegetation indices (SVIs) were used in combination with forest management variables to predict tree volume/ha and height using Random Forest. The results showed a 10–12 % increase in out of bag (OOB) r2when Sentinel-2 variables were included in the prediction of both volume and height together with BGI. Later, selected Sentinel-2 variables were used for biomass growth prediction in Maine, USA and New Brunswick, Canada using data from 7738 provincial permanent sample plots. The Sentinel-2 red-edge position (S2REP) index was identified as the most important variable over others to have known influence on site productivity. While a slight improvement in the iBGI accuracy occurred compared to the base BGI model (~2%), substantial changes to coefficients of other variables were evident and some site variables became less important when S2REP was included.

site productivity↗

NASA NTRS2018

Quantifying Long-Term Changes in Carbon Stocks and Forest Structure from Amazon Forest Degradation

Despite sustained declines in Amazon deforestation, forest degradation from logging and firecontinues to threaten carbon stocks, habitat, and biodiversity in frontier forests along the Amazon arcof deforestation. Limited data on the magnitude of carbon losses and rates of carbon recoveryfollowing forest degradation have hindered carbon accounting efforts and contributed to incompletenational reporting to reduce emissions from deforestation and forest degradation (REDD+). Wecombined annual time series of Landsat imagery and high-density airborne lidar data to characterizethe variability, magnitude, and persistence of Amazon forest degradation impacts on abovegroundcarbon density (ACD) and canopy structure. On average, degraded forests contained 45.1% of thecarbon stocks in intact forests, and differences persisted even after 15 years of regrowth. Incomparison to logging, understory fires resulted in the largest and longest-lasting differences in ACD.Heterogeneity in burned forest structure varied by fire severity and frequency. Forests with a historyof one, two, and three or more fires retained only 54.4%, 25.2%, and 7.6% of intact ACD,respectively, when measured after a year of regrowth. Unlike the additive impact of successive fires,selective logging before burning did not explain additional variability in modeled ACD loss andrecovery of burned forests. Airborne lidar also provides quantitative measures of habitat structure thatcan aid the estimation of co-benefits of avoided degradation. Notably, forest carbon stocks recoveredfaster than attributes of canopy structure that are critical for biodiversity in tropical forests, includingthe abundance of tall trees. We provide the first comprehensive look-up table of emissions factors forspecific degradation pathways at standard reporting intervals in the Amazon. Estimated carbon lossand recovery trajectories provide an important foundation for assessing the long-term contributionsfrom forest degradation to regional carbon cycling and advance our understanding of the currentstate of frontier forests.

Rappaport, Danielle I.↗

NASA NTRS2021

Developing a Set of Indicators to Identify, Monitor, and Track Impacts and Change in Forests of the United States

United States forestland is an important ecosystem type, land cover, land use, and economic resource that is facing several drivers of change including climatic. Because of its significance, forestland was identified through the National Climate Assessment(NCA) as a key sector and system of concern to be included in a system of climate indicators as part of a sustained assessment effort. Here, we describe 11 informative core indicators of forests and climate change impacts with metrics available or nearly available for use in the NCA efforts. The recommended indicators are based on a comprehensive conceptual model which recognizes forests as a land use, an ecosystem, and an economic sector. The indicators cover major forest attributes such as extent, structural components such as biomass, functions such as growth and productivity, and ecosystem services such as biodiversity and outdoor recreation. Interactions between humans and forests are represented through indicators focused on the wildland-urban interface, cost to mitigate wildfire risk, and energy produced from forest-based biomass. Selected indicators also include drought and disturbance from both wildfires and biotic agents. The forest indicators presented are an initial set that will need further refinement in coordination with other NCA indicator teams. Our effort ideally will initiate the collection of critical measurements and observations and lead to additional research on forest-climate indicators.

U.S. forests↗

NASA NTRS2022

Quantifying Mangrove Canopy Regrowth and Recovery After Hurricane Irma With Large-Scale Repeat Airborne Lidar in the Florida Everglades

Hurricane Irma caused significant damages to mangrove forested wetlands in south Florida, including defoliation, tree snapping, and uprooting. Previous studies have used optical satellite imagery to estimate large-scale forest disturbance and resilience patterns. However, satellite images alone cannot provide measurements of vertical mangrove structure. In this study, we used dense point cloud data collected by NASA Goddard’s LiDAR, Hyperspectral, and Thermal (G-LiHT) airborne imager before (March 2017) and after (December 2017 and March 2020) Hurricane Irma to quantify the recovery, or lack thereof, of the three-dimensional (3D) mangrove forest structure. Recent resilience and vulnerability models developed from Landsat time series following the storm were used to group the lidar data into distinct disturbance-recovery classes. We then analyzed lidar-based forest canopy within each of the recovery classes to test a suite of forest structural characteristics. Our results indicate that 77.0 % of the survey area experienced canopy height loss three months after Hurricane Irma, whereby the majority of canopy height loss occurred in areas with the tallest mangrove forests (i.e., 15–25 m tall). Our analysis shows that the mangrove canopy height in South Florida increased by an average 0.26 m from December 2017 to March 2020, with most of the forest (84.7 % of the survey area) experiencing canopy height regrowth. However, only 38.1 % of the survey area has recovered to pre-storm canopy height. The distribution of canopy height was significantly altered by Hurricane Irma in the low and intermediate resilience classes, but were not significantly different 2.5 years later. Indeed, in areas of low resilience, little to no vertical change has occurred suggesting the absence of canopy regrowth and natural regeneration. Conversely, mangroves in high resilience class, which are dominated by shorter canopies (<5 m), were not heavily damaged by the storm and have maintained the same structural attributes as those before Hurricane Irma. Our findings highlight that hurricane disturbances significantly alter mangrove forest canopy structure, but recovery of vertical structure varies by resilience classes, species composition, and canopy height.

Lidar↗

NASA NTRS1995

Estimation of Boreal Forest Biomass Using Spaceborne SAR Systems

In this paper, we report on the use of a semiempirical algorithm derived from a two layer radar backscatter model for forest canopies. The model stratifies the forest canopy into crown and stem layers, separates the structural and biometric attributes of the canopy. The structural parameters are estimated by training the model with polarimetric SAR (synthetic aperture radar) data acquired over homogeneous stands with known above ground biomass. Given the structural parameters, the semi-empirical algorithm has four remaining parameters, crown biomass, stem biomass, surface soil moisture, and surface rms height that can be estimated by at least four independent SAR measurements. The algorithm has been used to generate biomass maps over the entire images acquired by JPL AIRSAR and SIR-C SAR systems. The semi-empirical algorithms are then modified to be used by single frequency radar systems such as ERS-1, JERS-1, and Radarsat. The accuracy. of biomass estimation from single channel radars is compared with the case when the channels are used together in synergism or in a polarimetric system.

Saatchi, Sassan↗

NASA NTRS2003

Ectomycorrhizal Community Structure and Soil Characteristics of Mature Lodgepole Pine (Pinus Contorta) and Adjacent Stands of Old Growth Mixed Conifer in Yellowstone National Park, Wyoming USA

Forest development patterns following disturbance are known to influence the physical and chemical attributes of soils at different points in time. Changes in soil resources are thought to have a corresponding effect on ectomycorrhizal (ECM) community structure. We used molecular methods to compare below-ground ECM species richness, composition, and abundance between adjacent stands of homogenous lodgepole pine and old growth mixed conifer in Yellowstone National Park (YNP). In each stand-type we collected soil cores to both identify mycorrhizae and assess soil chemistry. Although no statistical difference was observed in the mean number of ECM root tips per core between stand types, the total number of species identified (85 versus 35) and the mean number of species per core (8.8 +/- 0.6 versus 2.5 +/- 0.3) were significantly higher in lodgepole pine. Differences between the actual and estimated species richness levels indicated that these forest types support a high number of ECM species and that undersampling was severe. Species compositions were widely disparate between stands where only four species were shared out of a total of 116. Soil analysis also revealed that mixed conifer was significantly lower in pH, but higher in organic matter, potassium, phosphorus, and ammonium when compared to lodgepole pine stands. Species richness per core was correlated with these chemical data, however, analysis of covariance indicated that stand type was the only statistically significant factor in the observed difference in species richness. Our data suggest that ECM fungal richness increases as homogenous lodgepole pine stands grow and mature, but declines after Engelmann spruce and subalpine fir colonize. Despite difficulties linking species composition with soil chemistry, there are a variety of physical and chemical factors that could be influencing ECM community structure. Future field experiments are necessary to test some of the mechanisms potentially operating within this system.

Douglas, Robert B.↗

NASA NTRSDate not supplied

Vegetation Heights for Landsat Land Cover Classes in the Interior Boreal Forest Region of Alaska

Accurate determination and mapping of vegetation height is a prerequisite for regional estimations of above ground biomass, carbon pool dynamics, and improved modeling of future climate-vegetation-soil interactions. This study combined land cover class maps (at 30-m pixel resolution) derived from Landsat image bands with canopy vegetation heights detected at 1-m resolution from NASA G-LiHT Lidar flights, both from the year 2014 for the Middle Tanana Valley near Fairbanks, Alaska. The statistical distributions and structural attributes from Lidar plant heights were derived and refined for all Landsat vegetation classes. Results showed that the tallest cover classes in this region were deciduous forests (dominated by birch and aspen), followed by evergreen spruce and wooded wetlands. Open shrubland and herbaceous cover areas were determined to be 2 - 5 m shorter, on average, than these boreal forest stands. Tall shrubland cover areas were slightly shorter than most spruce-dominated evergreen forest areas. Nearly 60% of all low shrubland and herbaceous wetland pixels were detected with at least one tree crown greater than 10 m tall. This was in contrast to evergreen and deciduous forest classes that showed 88% of stands with at least one tree crown greater than 10 m tall.

Vegetation↗

NASA NTRS2002

Low-Cost Evaluation of EO-1 Hyperion and ALI for Detection and Biophysical Characterization of Forest Logging in Amazonia (NCC5-481)

Major uncertainties exist regarding the rate and intensity of logging in tropical forests worldwide: these uncertainties severely limit economic, ecological, and biogeochemical analyses of these regions. Recent sawmill surveys in the Amazon region of Brazil show that the area logged is nearly equal to total area deforested annually, but conversion of survey data to forest area, forest structural damage, and biomass estimates requires multiple assumptions about logging practices. Remote sensing could provide an independent means to monitor logging activity and to estimate the biophysical consequences of this land use. Previous studies have demonstrated that the detection of logging in Amazon forests is difficult and no studies have developed either the quantitative physical basis or remote sensing approaches needed to estimate the effects of various logging regimes on forest structure. A major reason for these limitations has been a lack of sufficient, well-calibrated optical satellite data, which in turn, has impeded the development and use of physically-based, quantitative approaches for detection and structural characterization of forest logging regimes. We propose to use data from the EO-1 Hyperion imaging spectrometer to greatly increase our ability to estimate the presence and structural attributes of selective logging in the Amazon Basin. Our approach is based on four "biogeophysical indicators" not yet derived simultaneously from any satellite sensor: 1) green canopy leaf area index; 2) degree of shadowing; 3) presence of exposed soil and; 4) non-photosynthetic vegetation material. Airborne, field and modeling studies have shown that the optical reflectance continuum (400-2500 nm) contains sufficient information to derive estimates of each of these indicators. Our ongoing studies in the eastern Amazon basin also suggest that these four indicators are sensitive to logging intensity. Satellite-based estimates of these indicators should provide a means to quantify both the presence and degree of structural disturbance caused by various logging regimes. Our quantitative assessment of Hyperion hyperspectral and ALI multi-spectral data for the detection and structural characterization of selective logging in Amazonia will benefit from data collected through an ongoing project run by the Tropical Forest Foundation, within which we have developed a study of the canopy and landscape biophysics of conventional and reduced-impact logging. We will add to our base of forest structural information in concert with an EO-1 overpass. Using a photon transport model inversion technique that accounts for non-linear mixing of the four biogeophysical indicators, we will estimate these parameters across a gradient of selective logging intensity provided by conventional and reduced impact logging sites. We will also compare our physical ly-based approach to both conventional (e.g., NDVI) and novel (e.g., SWIR-channel) vegetation indices as well as to linear mixture modeling methods. We will cross-compare these approaches using Hyperion and ALI imagers to determine the strengths and limitations of these two sensors for applications of forest biophysics. This effort will yield the first physical ly-based, quantitative analysis of the detection and intensity of selective logging in Amazonia, comparing hyperspectral and improved multi-spectral approaches as well as inverse modeling, linear mixture modeling, and vegetation index techniques.

Asner, Gregory P.↗

NASA NTRS2020

Mapping Temperate Forest Phenology Using Tower, UAV, and Ground-Based Sensors

Phenology is a distinct marker of the impacts of climate change on ecosystems. Accordingly, monitoring the spatiotemporal patterns of vegetation phenology is important to understand the changing Earth system. A wide range of sensors have been used to monitor vegetation phenology, including digital cameras with different viewing geometries mounted on various types of platforms. Sensor perspective, view-angle, and resolution can potentially impact estimates of phenology. We compared three different methods of remotely sensing vegetation phenology—an unoccupied aerial vehicle (UAV)-based, downward-facing RGB camera, a below-canopy, upward-facing hemispherical camera with blue (B), green (G), and near-infrared (NIR) bands, and a tower-based RGB PhenoCam, positioned at an oblique angle to the canopy—to estimate spring phenological transition towards canopy closure in a mixed-species temperate forest in central Virginia, USA. Our study had two objectives: (1) to compare the above- and below-canopy inference of canopy greenness (using green chromatic coordinate and normalized difference vegetation index) and canopy structural attributes (leaf area and gap fraction) by matching below-canopy hemispherical photos with high spatial resolution (0.03 m) UAV imagery, to find the appropriate spatial coverage and resolution for comparison; (2) to compare how UAV, ground-based, and tower-based imagery performed in estimating the timing of the spring phenological transition. We found that a spatial buffer of 20 m radius for UAV imagery is most closely comparable to below-canopy imagery in this system. Sensors and platforms agree within +/− 5 days of when canopy greenness stabilizes from the spring phenophase into the growing season. We show that pairing UAV imagery with tower-based observation platforms and plot-based observations for phenological studies (e.g., long-term monitoring, existing research networks, and permanent plots) has the potential to scale plot-based forest structural measures via UAV imagery, constrain uncertainty estimates around phenophases, and more robustly assess site heterogeneity.

Jeff W. Atkins↗

NASA NTRS2018

Mangrove Canopy Height Globally Related to Precipitation and Cyclone Frequency

Mangrove wetlands are among the most productive and carbon-dense ecosystems in the world. Their structural attributes vary considerably across spatial scales, yielding large uncertainties in regional and global estimates of carbon stocks. Here, we present a global analysis of mangrove canopy height gradients and aboveground carbon stocks based on remotely sensed measurements and field data. Our study highlights that precipitation, temperature and cyclone frequency explain 74% of the global trends in maximum canopy height, with other geophysical factors influencing the observed variability at local and regional scales. We find the tallest mangrove forests in Gabon, equatorial Africa, where stands attain 62.8 m. The total global mangrove carbon stock (above- and belowground biomass, and soil) is estimated at 5.03 Pg, with a quarter of this value stored in Indonesia. Our analysis implies sensitivity of mangrove structure to climate change, and offers a baseline to monitor national and regional trends in mangrove carbon stocks.

Carbon cycle↗

NASA NTRS2020

Acoustic space occupancy: Combining ecoacoustics and lidar to model biodiversity variation and detection bias across heterogeneous landscapes

There is global interest in quantifying changing biodiversity in human-modified landscapes. Ecoacoustics may offer a promising pathway for supporting multi-taxa monitoring, but its scalability has been hampered by the sonic complexity of biodiverse ecosystems and the imperfect detectability of animal-generated sounds. The acoustic signature of a habitat, or soundscape, contains information about multiple taxa and may circumvent species identification, but robust statistical technology for characterizing community-level attributes is lacking. Here, we present the Acoustic Space Occupancy Model, a flexible hierarchical framework designed to account for detection artifacts from acoustic surveys in order to model biologically relevant variation in acoustic space use among community assemblages. We illustrate its utility in a biologically and structurally diverse Amazon frontier forest landscape, a valuable test case for modeling biodiversity variation and acoustic attenuation from vegetation density. We use complementary airborne lidar data to capture aspects of 3D forest structure hypothesized to influence community composition and acoustic signal detection. Our novel analytic framework permitted us to model both the assembly and detectability of soundscapes using lidar-derived estimates of forest structure. Our empirical predictions were consistent with physical models of frequency-dependent attenuation, and we estimated that the probability of observing animal activity in the frequency channel most vulnerable to acoustic attenuation varied by over 60%, depending on vegetation density. There were also large differences in the biotic use of acoustic space predicted for intact and degraded forest habitats, with notable differences in the soundscape channels predominantly occupied by insects. This study advances the utility of ecoacoustics by providing a robust modeling framework for addressing detection bias from remote audio surveys while preserving the rich dimensionality of soundscape data, which may be critical for inferring biological patterns pertinent to multiple taxonomic groups in the tropics. Our methodology paves the way for greater integration of remotely sensed observations with high-throughput biodiversity data to help bring routine, multi-taxa monitoring to scale in dynamic and diverse landscapes.

Airborne lidar↗

NASA NTRS1991

Relating the temporal change observed by AIRSAR to surface and canopy properties of mixed conifer and hardwood forests of northern Michigan

The mixed hardwood and conifer forests of northern Michigan were overflown by a 3-frequency airborne imaging radar in Apr. and Jul. 1990. A set of 10 x 10 km test sites near the University of Michigan Biological Station at Douglas Lake and within the Hiawatha National Forest in the upper peninsula of Michigan contained training stands representing the various forest species typical of forest communities across the ecotone between the coniferous boreal forest and mid-latitude hardwood and coniferous forests. The polarimetric radar data were externally calibrated to allow interdate comparisons. The Apr. flight was prior to bud-break of deciduous species and patchy snowcover was present. The Jul. flights occurred during and 2 days after heavy rain showers, and provide a unique opportunity to examine the differences in radar backscatter attributable to intercepted precipitation. Analyses show that there are significant changes in backscattering between biophysically dissimilar forest stands on any given date and also between dates for a given forest stand. These differences in backscattering can be related to moisture properties of the forest floor and the overlying canopy and also to the quantity and organizational structure of the above-ground biomass.

Dobson, M. Craig↗

NASA NTRS1995

Research support of the WETNET Program

This study examines various aspects of the Microwave Vegetation Index (MVI). MVI is a derived signal created by differencing the spectral response of the 37 GHz horizontally and vertically polarized passive microwave signals. The microwave signal employed to derive this index is thought to be primarily influenced by vegetation structure, vegetation growth, standing water, and precipitation. The state of California is the study site for this research. Imagery from the Special Sensor Microwave/Imager (SSM/I) is used for the creation of MVI datasets analyzed in this research. The object of this research is to determine whether MVI corresponds with some quantifiable vegetation parameter (such as vegetation density) or whether the index is more affected by known biogeophysical parameters such antecedent precipitation. A secondary question associated with the above is whether the vegetation attributes that MVI is employed to determine can be more easily and accurately evaluated by other remote sensing means. An important associated question to be addressed in the study is the effect of different multi-temporal composting techniques on the derived MVI dataset. This work advances our understanding of the fundamental nature of MVI by studying vegetation as a mixture of structural types, such as forest and grassland. The study further advances our understanding by creating multitemporal precipitation datasets to compare the affects of precipitation upon MVI. This work will help to lay the groundwork for the use of passive microwave spectral information either as an adjunct to visible and near infrared imagery in areas where that is feasible or for the use of passive microwave alone in areas of moderate cloud coverage. In this research, an MVI dataset, spanning the period February 15, 1989 through April 25, 1990, has been created using National Aeronautic and Space Administration (NASA) supplied brightness temperature data. Information from the DMSP satellite 37 GHz wavelength SSM/I sensor in both horizontal and vertical polarization has been processed using the MVI algorithm. In conjunction with the MVI algorithm a multitemporal compositing technique was used to create datasets that correspond to 14 day periods. In this technical report, Section Two contains background information on the State of California and the three MVI study sites. Section Three describes the methods used to create the MVI and independent variables datasets. Section Four presents the results of the experiment. Section Five summarizes and concludes the work.

Estes, John E.↗