Minor elements in forsterites of Orgueil (C1), Alais (C1) and two interplanetary dust particles compared to C2-C3-UOC forsterites
Explore the source record for details and available documents.
Steele, Ian M.↗
SEARCH · Search NASA
Results for “forsterite”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Analyses of Cometary Silicate Crystals: DDA Spectral Modeling of Forsterite
Comets are the Solar System's deep freezers of gases, ices, and particulates that were present in the outer protoplanetary disk. Where comet nuclei accreted was so cold that CO ice (approximately 50K) and other supervolatile ices like ethane (C2H2) were preserved. However, comets also accreted high temperature minerals: silicate crystals that either condensed (greater than or equal to 1400 K) or that were annealed from amorphous (glassy) silicates (greater than 850-1000 K). By their rarity in the interstellar medium, cometary crystalline silicates are thought to be grains that formed in the inner disk and were then radially transported out to the cold and ice-rich regimes near Neptune. The questions that comets can potentially address are: How fast, how far, and over what duration were crystals that formed in the inner disk transported out to the comet-forming region(s)? In comets, the mass fractions of silicates that are crystalline, f_cryst, translate to benchmarks for protoplanetary disk radial transport models. The infamous comet Hale-Bopp has crystalline fractions of over 55%. The values for cometary crystalline mass fractions, however, are derived assuming that the mineralogy assessed for the submicron to micron-sized portion of the size distribution represents the compositional makeup of all larger grains in the coma. Models for fitting cometary SEDs make this assumption because models can only fit the observed features with submicron to micron-sized discrete crystals. On the other hand, larger (0.1-100 micrometer radii) porous grains composed of amorphous silicates and amorphous carbon can be easily computed with mixed medium theory wherein vacuum mixed into a spherical particle mimics a porous aggregate. If crystalline silicates are mixed in, the models completely fail to match the observations. Moreover, models for a size distribution of discrete crystalline forsterite grains commonly employs the CDE computational method for ellipsoidal platelets (c:a:b=8.14x8.14xl in shape with geometrical factors of x:y:z=1:1:10, Fabian et al. 2001; Harker et al. 2007). Alternatively, models for forsterite employ statistical methods like the Distribution of Hollow Spheres (Min et al. 2008; Oliveira et al. 2011) or Gaussian Random Spheres (GRS) or RGF (Gielen et al. 200S). Pancakes, hollow spheres, or GRS shapes similar to wheat sheaf crystal habit (e.g., Volten et al. 2001; Veihelmann et al. 2006), however, do not have the sharp edges, flat faces, and vertices seen in images of cometary crystals in interplanetary dust particles (IDPs) or in Stardust samples. Cometary forsterite crystals often have equant or tabular crystal habit (J. Bradley). To simulate cometary crystals, we have computed absorption efficiencies of forsterite using the Discrete Dipole Approximation (DDA) DDSCAT code on NAS supercomputers. We compute thermal models that employ a size distribution of discrete irregularly shaped forsterite crystals (nonspherical shapes with faces and vertices) to explore how crystal shape affects the shape and wavelength positions of the forsterite spectral features and to explore whether cometary crystal shapes support either condensation or annealing scenarios (Lindsay et al. 2012a, b). We find forsterite crystal shapes that best-fit comet Hale-Bopp are tetrahedron, bricks or brick platelets, essentially equant or tabular (Lindsay et al. 2012a,b), commensurate with high temperature condensation experiments (Kobatake et al. 2008). We also have computed porous aggregates with crystal monomers and find that the crystal resonances are amplified. i.e., the crystalline fraction is lower in the aggregate than is derived by fitting a linear mix of spectral features from discrete subcomponents, and the crystal resonances 'appear' to be from larger crystals (Wooden et al. 2012). These results may indicate that the crystalline mass fraction in comets with comae dominated by aggregates may be lower than deduced by popular methods that only emoy ensembles of discrete crystals.
Wooden, Diane↗
Forsterite and Olivine in Sahara-97210 (LL3.2) and Chainpur (LL3.4) Chondrules: Compositional Evolution and the Influence of Melting
It is generally accepted that chondrules contain relict grains that did not crystallize in situ, and that forsterite is one type of relict grain which is a likely precursor for chondrules. Chemically and morphologically similar forsterite is also found as "isolated grains", especially in carbonaceous chondrites. Using SIMS, we analyzed forsterite, ferrous overgrowths around forsterite, and coexisting normal olivine in 5 chondrules and 2 isolated grains in the Sahara-97210 ('Sahara") LL3.2 chondrite. We earlier used the same methods to study olivine in 3 Chainpur chondrules that contain relict forsterite. Our new data for Sahara provide additional insight into the processes affecting chondrules and their precursors.
Ruzicka, A.↗
DDA Computations of Porous Aggregates with Forsterite Crystals: Effects of Crystal Shape and Crystal Mass Fraction
Porous aggregate grains are commonly found in cometary dust samples and are needed to model cometary IR spectral energy distributions (SEDs). Models for thermal emissions from comets require two forms of silicates: amorphous and crystalline. The dominant crystal resonances observed in comet SEDs are from Forsterite (Mg2SiO4). The mass fractions that are crystalline span a large range from 0.0 < or = fcrystal < or = 0.74. Radial transport models that predict the enrichment of the outer disk (>25 AU at 1E6 yr) by inner disk materials (crystals) are challenged to yield the highend-range of cometary crystal mass fractions. However, in current thermal models, Forsterite crystals are not incorporated into larger aggregate grains but instead only are considered as discrete crystals. A complicating factor is that Forsterite crystals with rectangular shapes better fit the observed spectral resonances in wavelength (11.0-11.15 microns, 16, 19, 23.5, 27, and 33 microns), feature asymmetry and relative height (Lindley et al. 2013) than spherically or elliptically shaped crystals. We present DDA-DDSCAT computations of IR absorptivities (Qabs) of 3 micron-radii porous aggregates with 0.13 < or = fcrystal < or = 0.35 and with polyhedral-shaped Forsterite crystals. We can produce crystal resonances with similar appearance to the observed resonances of comet Hale- Bopp. Also, a lower mass fraction of crystals in aggregates can produce the same spectral contrast as a higher mass fraction of discrete crystals; the 11micron and 23 micron crystalline resonances appear amplified when crystals are incorporated into aggregates composed otherwise of spherically shaped amorphous Fe-Mg olivines and pyroxenes. We show that the optical properties of a porous aggregate is not linear combination of its monomers, so aggregates need to be computed. We discuss the consequence of lowering comet crystal mass fractions by modeling IR SEDs with aggregates with crystals, and the implications for radial transport models of our protoplanetary disk.
Crystal Shape and Crystal Mass Fraction↗
Absorption Efficiencies of Forsterite. I: DDA Explorations in Grain Shape and Size
We compute the absorption efficiency (Q(sub abs)) of forsterite using the discrete dipole approximation (DDA) in order to identify and describe what characteristics of crystal grain shape and size are important to the shape, peak location, and relative strength of spectral features in the 8 - 40 micron wavelength range. Using the DDSCAT code, we compute Q(sub abs) for non-spherical polyhedral grain shapes with a(sub eff) = 0.1 micron. The shape characteristics identified are: 1) elongation/reduction along one of three crystallographic axes; 2) asymmetry, such that all three crystallographic axes are of different lengths; and 3) the presence of crystalline faces that are not parallel to a specific crystallographic axis, e.g., non-rectangular prisms and (di)pyramids. Elongation/reduction dominates the locations and shapes of spectral features near 10, 11, 16, 23.5, 27, and 33.5 micron, while asymmetry and tips are secondary shape effects. Increasing grain sizes (0.1 - 1.0 micron) shifts the 10, 11 micron features systematically towards longer wavelengths and relative to the 11 micron feature increases the strengths and slightly broadens the longer wavelength features. Seven spectral shape classes are established for crystallographic a-, b-, and c-axes and include columnar and platelet shapes plus non-elongated or equant grain shapes. The spectral shape classes and the effects of grain size have practical application in identifying or excluding columnar, platelet or equant forsterite grain shapes in astrophysical environs. Identification of the shape characteristics of forsterite from 8 - 40 micron spectra provides a potential means to probe the temperatures at which forsterite formed.
circumstellar matter↗
Self-mode-locked chromium-doped forsterite laser generates 50-fs pulses
Stable transform-limited (delta nu-delta tau = 0.32) femtosecond pulses with a FWHM of 50 fs were generated from a self-mode-locked chromium-doped forsterite laser. The forsterite laser was synchronously pumped by a CW mode-locked Nd:YAG (82 MHz) laser that generated picosecond pulses (200-300 ps) and provided the starting mechanism for self-mode-locked operation. Maximum output power was 45 mW for 3.9 W of absorbed pumped power with the use of an output coupler with 1 percent transmission. The self-mode-locked forsterite laser was tuned from 1240 to 1270 nm.
Seas, A.↗
Diffusion-controlled magnesium isotopic fractionation of a single crystal forsterite evaporated from the solid state
Though the origin of calcium- and aluminum-rich inclusions (CAI's) in carbonaceous chondrites is till a disputed issue, evaporation is no doubt one of the most important processes for the formation of CAI's in the early solar nebula. The mechanism for production of large isotopic mass fractionation effects in magnesium, silicon, oxygen, and chromium in CAI's can be better understood by examining isotopic fractionation during the evaporation of minerals. New evaporation experiments were performed on single-crystal forsterite. The magnesium isotopic distribution near the evaporating surfaces of the residues using a modified AEI IM-20 ion microprobe to obtain rastered beam depth profiles was measured. A theoretical model was used to explain the profiles and allowed determination of the diffusion coefficient of Mg(++) in forsterite at higher temperatures than previous measurements. The gas/solid isotopic fractionation factor for magnesium for evaporation from solid forsterite was also determined and found to be nearly the same as that for evaporation of liquid Mg2SiO4.
Wang, Jianhua↗
Forsterite from Chondrules in the Mokoia (CV3) Chondrite: Cathodoluminescence, Chemistry and Oxygen Isotopes
Forsterite in Mokoia chondrules shows CL zoning which can be quite complex. Oxygen isotope analyses in forsterite with different CL intensities are homogeneous, showing that refractory and melt-grown forsterites are isotopically indistinguishable. Additional information is contained in the original extended abstract.
Jones, R. H.↗
Relict Forsterite in Chondrules: Implications for Cooling Rates
Forsterite (Fo(sub 99-100)) is often present in chondrules as relict grains that did not crystallize in situ and as isolated grains outside of chondrules; both are surrounded by ferrous overgrowths which clearly formed at a later time, probably during chondrule formation. We performed microprobe analyses across forsterite-overgrowth interfaces in 12 chondrules and 4 isolated grains in the Sahara-97210 LL3.2 (Sahara), Wells LL3.3, and Chainpur LL3.4 chondrites and modelled diffusional exchange between forsterite and overgrowths, with the goal of constraining the thermal histories during chondrule formation. The cooling rates experienced by chondrules provide an important constraint on the origin and setting of these objects.
Greeney, S.↗
Cumberland Falls chondritic inclusions - Mineralogy/petrology of a forsterite chondrite suite
The mineralogy and petrology of a suite of chondritic inclusions from the Cumberland Falls aubrite are investigated in order to clarify the relation of the inclusions to each other, forsterite chondrites, and the aubrites. Thin sections of nine chondritic inclusions and the achondritic matrix of Cumberland Falls were examined in reflected light, then analyzed for up to 12 elements by electron microprobe techniques. Minerals detected in abundant quantities include low-Ca pyroxene, olivine, plagioclase, kamacite, taenite, schreibersite, troilite, ferroan alabandite and daubreelite; diospide, oldhamite and a Ti-rich sulfide are found in one or two inclusions. The mineralogic compositions indicate similar degrees of reduction for the inclusions in the Cumberland Falls meteorites and in four meteorites identified as forsterite chondrites (Kakangari, Mt. Morris, Pontlyfni and Winona). The inclusions are found to be of a primitive composition, corresponding to petrological types 2 or 3, while the identification of jadeitic pyroxene in nearly all inclusions indicates a substantial degree of shock. The results suggest that the inclusions formed from nebular material that condensed and accreted over a broad redox range, and experienced tertiary shock in a collision with an enstatite meteorite in which the Cumberland Falls meteorite formed.
Neal, C. W.↗
Cathodoluminescence zoning and minor elements in forsterites from the Murchison (C2) and Allende (C3V) carbonaceous chondrites
Cathodoluminescence has been applied to look for textural features of olivine in carbonaceous meteorites relevant to the unresolved dispute over the origin of the olivine, whether from a vapor or a liquid. Cathodoluminescence photographs of forsterite grains in Murchison (C2) and Allende (C3) meteorites presented here reveal a blue core with planar boundaries to a red or dark rim. High-precision electron microprobe analyses have been performed which reveal unusually large amounts of the 'minor' elements Al, Ti, and Ca in the blue cores of these forsterites, suggesting formation by crystallization at high temperatures from a source rich in these metals. Following conclusions drawn from previous analyses of olivine in meteorites, it is argued that the minor element signature should be able to characterize olivines in micrometeorites and in deep-sea particles.
Steele, I. M.↗
Effective gain measurements in chromium-doped forsterite
Effective gain cross section in tetravalent chromium-doped forsterite laser crystal was measured over the 1180-1330 nm spectral range. The experiment was performed using two collinear laser beams in a pump-and-probe arrangement. The peak-gain cross section from this measurement is estimated to be 1.9 x 10 to the -19th sq cm at 1215 nm, which is comparable to the value of about 2 x 10 to the -19th sq cm predicted by fluorescence linewidth and lifetime measurements. These results indicate that excited-state absorption is not a major loss mechanism in tetravalent chromium-doped forsterite.
Petricevic, V.↗
Generation of sub-100-fs pulses from a CW mode-locked chromium-doped forsterite laser
Generation of femtosecond pulses from a continuous-wave mode-locked chromium-doped forsterite laser is reported. The forsterite laser was actively mode locked by using an acoustooptic modulator operating at 78 MHz with two Brewster high-dispersion glass prisms for intracavity chirp compensation. Transform-limited sub-100-fs pulses were routinely generated in the TEM(00) mode with 85 mW of continuous power (with 1 percent output coupler), tunable over 1230-1280 nm. The shortest pulses measured had a 60-fs pulse width.
Seas, A.↗
Femtosecond pulses generated from a synchronously pumped chromium-doped forsterite laser
Kerr lens mode-locking (KLM) has become a standard method to produce femtosecond pulses from tunable solid state lasers. High power inside the laser resonator propagating through the laser-medium with nonlinear index of refraction, coupled with the stability conditions of the laser modes in the resonator, result in a passive amplitude modulation which explains the mechanism for pulse shortening. Recently, chromium doped forsterite was shown to exhibit similar pulse behavior. A successful attempt to generate femtosecond pulses from a synchronously pumped chromium-doped forsterite laser with intracavity dispersion compensation is reported. Stable, transform limited pulses with duration of 105 fs were routinely generated, tunable between 1240 to 1270 nm.
Seas, A.↗
Signatures of the Impact Histories of Comets and Asteroids within Shocked Phyllosilicates, Enstatite, and Forsterite Minerals
Throughout the lifetime of the solar system, collisions between small bodies and impacts on the surfaces of small bodies in the Kuiper Belt have occured at speeds of 1.5 - 3 km s-1 (Stern, Astron J 124, 2002), typically at 1-10 km s-1 between Trojan asteroids (Marzari et al. Icarus 119, 1996), and at ~4-8 km s-1 in the asteroid belt (Farinella and Davis, Icarus 97, 1992). Shock effects recorded by minerals composing these bodies are one observable legacy of this evolutionary process, whether they were generated through large collisions, micrometeoroid impacts, or processing during the formation of the solar system. Shock metamorphism has been observed in cometary samples such as those from Comet Wild 2 (Keller et al. Geochim. Cosmochim. Acta 72, 2008; Tomeoka et al. MAPS 43, 2008; Jacobs et al. MAPS 44, 2009) as well as in forsterites and enstatites found in meteorites (McCausland et al. AGU, 2010). To investigate the observable signatures of these processes, we have conducted a suite of impact experiments at NASA Johnson Space Center's Experimental Impact Laboratory (EIL). Target materials included Mg-rich forsterite (olivine), Mg-rich enstatite (orthopyroxene), and antigorite and lizardite (both in the serpentine group of phyllosilicates). Alumina-ceramic spheres were launched at speeds ranging from ~2.0 - 2.6 km s-1 into targets at temperatures from 25degC to -100degC. Recent advancements have been made in cooling targets in the EIL's vertical gun. Liquid nitrogen (LN2) is fed through a unique jacket surrounding the metallic sample container to chill the samples. Real-time values from temperature sensors attached to the sample holder are converted to target temperature through predetermined regression relationships, providing the target temperature at the time of impact with sub-degree accuracy. Fourier Transform Infrared Spectrometer (FTIR) data in the near to mid-IR will be presented, along with trends relating temperature and velocity with impact speeds, and thereby peak shock stresses experienced by the impacted minerals.
Lederer, Susan M.↗
Elastic constants of single-crystal forsterite as a function of temperature and pressure
Adiabatic elastic stiffness constants of single crystal forsterite measured as function of hydrostatic pressure and temperature, using pulse superposition technique
Barsch, G. R.↗
The system anorthite-forsterite-fayalite-silica to 2 kbar with lunar petrologic applications
Near-liquidus phase relations in the magnesium-rich portion of the system anorthite-forsterite-fayalite-silica have been determined from synthesis experiments at 1 atm and 2 kbar at oxygen fugacities near the iron-wuestite buffer. The major-element chemistries of KREEP basalts are similar to peritectic liquids, L/ol,px,an/, produced experimentally. The reaction L/ol,px,an/ is well-located at low pressures. It intersects the join anorthite-enstatite-ferrosilite at Fe/(Fe+Mg) equals 0.45 (atomic ratio), and is peritectic only for Fe/(Fe+Mg) not greater than 0.45. Although positions of the equilibria, L/an,ol/ and L/ol,px/, differ significantly at 1 atm from their positions at 2 kbar, the position of the piercing point, L/ol,px,an/, on the anorthite-enstatite-ferrosilite join is not sensitive to pressure. The composition of liquids produced by partial melting of troctolites and pyroxenites in the lunar crustal environment will be affected by pressure, whereas liquids derived from gabbroic assemblages will not.
Merrill, R. B.↗
Two forsterite-bearing FUN inclusions in the Allende meteorite
Two forsterite-, fassaite-, spinel-rich inclusions in Allende which share common mineralogy and texture with three previously described inclusions are described. These inclusions were at least partially molten at temperatures over 1400 C, and their crystallization sequence was spinel, olivine, fassaite, and Mg-rich melilite. At least some of them experienced partial volatilization of MgO and SiO2 from their outer margins. At least one of the inclusions is highly enriched in MgO relative to CaO and Al2O3 compared to Allende coarse-grained inclusions, although it is just as strongly enriched in refractory trace elements as the latter, relative to C1 chondrites. Two of the objects are FUN inclusions on the basis of their oxygen, magnesium, and silicon isotopic compositions.
Clayton, R. N.↗